Permissions Windows 10 RTM

Hello!

My current specification:

Material: Mind Windows 8.1 Pro ReadyNAS 102 (Firmware 6.2.4)

Network: AVM FritzBox 7390 and AVM PowerLine

The standard permissions "everyone - read/write ' for all the files works very well.

Windows user: @outlook.com account

The RTM of Windows RTM 10 version is already available, but I have big problems with

the permissions, because it works as a local user, but after sign you in with one account Outlook.com

I have no access to my ReadyNAS. Of course I've already updated authentication (RN102: accounts, authentication), but no succss.

Someone has an idea, because Windows 10 works very well, but without my ReadyNAS it makes no sense.

Thanks for your help and have a great day.

When you say no access, you see the readynas from your PC? What is the message you receive when you try to access the folders/files?

Just to clarify, you have configured a user on the readynas that has the same user name username @outlook.com and the password is the same? Have you tried to make the owner of the shares of the outlook.com user, I'd be a little careful with this, configuration just a part of test for test permissions.
I do not use so difficult to test outlook.com and windows 10. is the login for outlook.com you use as your main PC for windows login, because these would be the credentials presented to the nas?
Can you find windows manager 10 powers?

Tags: Netgear

Similar Questions

  • 4 "other unknown devices" in Device Manager. Windows 7 RTM 64 dv7 1450

    Just bought a computer HP dv7-1450 laptop with AMD Turion X 2 64 processors. Installed Windows 7 RTM 64 and everything seems to work except there are 4 unknown "other devices" listed in Device Manager. The 4 devices are:

    -System base unit (x 3)

    -Unknown Device (x 1)

    I have no idea what are these devices. I tried looking for drivers for chipset on the AMD and HP Web site without result. But I do not know if these are the associated chipsets. One of the devices would be the disk fall sensor hard (it does not appear in the device no matter where Manager)?

    Unfortunately on the HP site, there are not many downloads of drivers available for the 64-bit (Vista). I know that Windows 7 64 drivers won't be available until in October, but if there are not any available Vista drivers either, I expect to see all the drivers for Windows 7?

    The most important thing for me is just to know what are these "other devices" 4 and get the drivers installed.

    Thanks in advance!

    ProtectSmart Hard Drive Protection here

  • Driver missing in Windows 7 RTM TX2000 coprocessor

    I installed Windows 7 RTM on my HP TX2000 and everything went well, except for a missing 'coprocessor' driver. I did a little research and found several posts that seem to indicate that I need to install one of the Vista 64 drivers manually. I downloaded, extracted, then tried each sets pilot but Device Manager reports it found no compatible driver.

    Is there a new driver for Windows 7? Is there another driver, I can use?

    I finally found the missing driver by a link in another post here.

  • No sound on Portege R500 using Windows 7 RTM

    Hi all

    I have the problem of sound with Windows 7 RTM. No sound playback, the microphone works very well and the control panel > hardware and sound > Realtek HD Audio Manager detects whenever a microphone or headset is (UN) plugged.

    Any driver I install and no matter as the playback source (sound system, Media Player, Winamp and others), there is no playback of the sound on the speakers or the headphones. The last I installed Realtek R2.31 is.

    I start to wonder if what happens to be fixed, after all, Windows 7 is to go gold and there is no solution for this problem.

    Hello Paulo

    If you see this section of Win7 you will find a lot of comments but a general message is: Win7 is not published official and drivers Toshiba doesn't offer WIN7 at the moment. When the Win7's official published Toshiba will start Win7 support, and I hope that your Portege will also build.

    This means that Toshiba will offer drivers Win7 on Toshiba download page. These drivers will be tested and it should work properly. Now on US Toshiba support page you can download some drivers Win7 BETA (untested). If you want to check under http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_modSel.jsp

  • Re: NB200 - how to get PPV works on Windows 7 RTM?

    If someone finds a way to install the latest version of util_tvap_TC00169400B and the FN & F8 works could they possibly place an update.

    I have successfully installed Windows 7 RTM, with the disk monitoring HARD & Bluetooth all working correctly, but the majority of special FN keys do not work as the parameters without wire volume, brightness, & put into hibernation work.

    Hello

    I think that at the moment you can't do anything. Windows 7 is not released yet and also no drivers or utilities. You must understand that you need to wait a few more weeks because after the release of Windows 7 tools and drivers must be pre-tested.

    If some Vista drivers or tools work on Windows 7 it s nice, but if not you can do nothing.

    Here also a thread similar to this topic:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=162103

    Welcome them

  • Yoga 2 Pro - sleep setting missing after upgrade to Windows 10 RTM

    Here's another interesting event. I use sleep mode all the time, that's what happens "when I close the lid. After upgrade Windows 8.1 for Windows 10 RTM, "standby mode" is not found. "when I close the lid" and related parameters in power management have an empty selection, sleep does not appear in the drop-down list of choices. It seems revenue to "Put to sleep" by default. By reading the other Windows 10 forums I know sleep is supported in Windows 10, how can I get that back? I tried to download and install the latest driver for power management (as dated 17/07/2015, I think) but I get the message that "you already have a newer version of the driver installed", I cancelled out of the facility. Are there newer drivers planned for soon? I can shoot with Microsoft Basic Display Driver (3200 x 1800 only, see my other ad in the forum), although I used a different resolution in Windows 8.1 and hibernate instead of mode 'sleep', but I hope that these features will work soon. Thank you, Bob

    * Sleep is back * after having solved my problem of graphics driver. Fixed. See the thread «driver Intel HD graphics on Yoga 2 Pro fail after...» "for more details. Cheers, Bob

  • If I installed windows 8 rtm company I can install windows 8 pro at the end of the assessment?

    at the end of windows 8 rtm company can I install windows 8 pro and keep files and programs?

    Hello

    You should be able to keep files and settings, but you may need to
    reinstall your programs.

    To make sure you get check correct information in the TechNet Forums where Windows 8
    Enterprise Edition is supported.

    TechNet - Windows 8 IT Pro
    http://social.technet.Microsoft.com/forums/en/category/w8itpro

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Windows Enterprise RTM (release 15 August) Activation error

    Today, as an MSDN Subscriber, I downloaded Windows Enterprise RTM MSDN and installed my laptop. When installing, I never had the chance to provide the product key (obtained from MSDN). Once I tried to activate my Windows after installation, I kept getting "error 0x8007007B the file name, directory name or volume label syntax is incorrect." There is no way to change the product key on the Windows Activation app. I could provide screenshots and my product key if required; Please help me. Thank you very much.

    Today, as an MSDN Subscriber, I downloaded Windows Enterprise RTM MSDN and installed my laptop. When installing, I never had the chance to provide the product key (obtained from MSDN). Once I tried to activate my Windows after installation, I kept getting "error 0x8007007B the file name, directory name or volume label syntax is incorrect." There is no way to change the product key on the Windows Activation app. I could provide screenshots and my product key if required; Please help me. Thank you very much.

    Run - "slui 3 ' to insert the activation key and everything works fine.
    Kind regards
    Andrea.
  • Is this version of the Windows 8 RTM or Windows 9 Alpha?

    (9200.16384.WIN8_RTM.120725 - 1247) is this build windows 8 RTM or windows 9 alpha?

    I'm rather puzzled by your question. Even a quick analysis of the designation of building answers the question. Note that, while it is expected that Windows 8 versions will go to manufacturing and MS partners soon, it is not available to end consumers yet. Places where it could be considered to be available are not good sources and involve various risks. In my view, it is better to stick to the version official candidate/preview until you can get the files of good quality of good sources.

    Good luck.

    Tom Ferguson

  • Wat (windows activation technologies)... I have windows 7 rtm... when I install this update, my windows are not authentic... why?

    Wat (windows activation technologies)... I have windows 7 rtm... when I install this update, my windows are not authentic... why?

    Here is a possible explanation:

    Windows 7 displays "Windows is not genuine" with the code 0x80070005 error
    http://support.Microsoft.com/kb/2008385 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Windows 7 RTM + Windows Live

    Ultimacy Windows 7 RTM 6.1.7600.16385 x 86 + windows live is good until the help live movie maker a serious error error Log:
    Signature of the problem:
    Problem event name: APPCRASH
    Application name: MovieMaker.Exe
    Application version: 14.0.8091.730
    Application timestamp: 4a72982a
    Fault Module name: nvd3dum.dll
    Fault Module Version: 8.15.11.9038
    Timestamp of Module error: 4a5ce4a1
    Exception code: c0000005
    Exception offset: 00373037
    The system version: 6.1.7600.2.0.0.256.1
    Locale ID: 1033
    Additional information 1: 0a9e
    More information 2: 0a9e372d3b4ad19135b953a78882e789
    Additional information 3: 0a9e
    Additional information 4: 0a9e372d3b4ad19135b953a78882e789

    Read our privacy statement online:
      http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

    If the online privacy statement is not available, please read our offline privacy statement:
    C:\Windows\system32\en-US\erofflps.txt
    After reading this error log is NOT the problem of NVIDIA I have only to enlarge the window Live Movie Maker then Baam
    NVIDIA 8800 Gts 512 MB Tm is used
    Driver version: 190.38

    Forum Windows 7:

    http://social.answers.Microsoft.com/forums/en-us/GettingReadyforWindows7/threads

    Link above is "Preparing for Windows 7" Forum.

    http://social.technet.Microsoft.com/forums/en/category/w7itpro/

    Link above is Windows 7 Forum, to more technical questions about windows 7.

    Windows 7 questions should be directed to the it.

    You are in the Vista Forums.

    See you soon.

    Mick Murphy - Microsoft partner

  • Windows 7 RTM, problem explore Lenovo Y 550?

    I just installed Windows 7 RTM on my Lenovo y550 and installed all the drivers.  When I open a window or program and the minimize, I can't click on an icon or on the desktop. If I click on show desktop at the bottom right, then I can interact with any icon and the office very well.

    I tried uninstalling and reinstalling the graphics driver, but he has not solved. I also noticed that the driver for graphics card uninstalled, the problem is still present. I reinstalled the chipset driver and reinstalled the graphics driver, once again, but nothing helped.

    If you terminate the process explorer.exe and then restart, the problem is still there.

    Any help would be appreciated!

    I just wanted to update for those who might experience this problem; the Lenovo OneKey theater was the problem. After you disable the program out of Msconfig, the problem disappeared.

  • Windows 7 RTM search resulting Sharing Violation in Excel 2007

    I use Windows 7 RTM Ultamite 64 - bit (updated recently to Vista) with Office 2007 SP2. I do very frequent experience sharing Violations in Excel 2007 that disappear if I disable the search (for example using the indexer status gadget) and come back when I turn it back on. According to the gadget I find 6.1.7600.16385. FYI I have also Windows Defender (currently disabled) and Trend Micro WFBS 6.5, but these programs do not seem to be involved, based on the problem will disappear and return when I stop and start the search indexer.

    This problem occurs very frequently and has already caused losses of productivity.

    Here's a typical scenario:
    -Open an Excel file
    -changes in the leaves or in VBA (the problem occurs regardless of whether or not there are macros or if the file is in the format 2003/xls or xlsm xlss 2007)
    -Click Save
    -get the "Sharing Violation": your changes could not be saved in "" because of a Division. violation try saving to another file.
    - , then get: the file you are trying to open, "<########>", is in a different format than specified by the file extension. Check that the file is not corrupted and precedes by a trusted source before you open the file. Do you want to open it now?
    - , leave the Save as dialog box, save (sometimes works); then get:
    -Do you want to save changes to ''?
    -
    -get again save under and try and save it under another name or overwrite existing
    -Exit: errors were detected during the recording of "". Microsoft Office may be able to save the file by removing or repairing some features. To make the repairs in a new file, click on continue. To cancel saving the file, click Cancel.
    -get , save as, and then: Excel encountered errors during save. However, Excel was minimally save your file to .
    - or sometimes, instead of the above, I get a message that the file is damaged and cannot be repaired.

    Anyway, please provide a fix for this problem as soon as POSSIBLE.

    I contacted Trend Micro and they report that it is a known problem in the current version of the WFBS and they provide me with an update to try.

  • Windows 7 RTM - lsass.exe error causes Windows reboot

    I got my copy of Windows 7 RTM de MSDN AA and have been in love ever since I installed it, all except for one problem.

    My computer is part of a domain the active directory.  I receive the following two errors:

    The failing application name: lsass.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc155
    The failed module name: ntdll.dll, version: 6.1.7600.16385, time stamp: 0x4a5be02b
    Exception code: 0xc0000374
    Offset: 0x00000000000c6cd2
    ID of the process failed: 0 x 234
    Start time of application vulnerabilities: 0x01ca23c92c9a9900
    The failing application path: C:\Windows\system32\lsass.exe
    The failed module path: C:\Windows\SYSTEM32\ntdll.dll
    Report ID: 1772eae8-9017-11de-a36a-001e8cb7e844

    About one second after the error, I get the following error:
    A process of critical system, C:\Windows\system32\lsass.exe, failed with status 255 code.  You must now restart the machine.

    Then, a message saying "Windows has encountered a critical problem and will restart automatically in a minute.  Please save your work now. "and then the computer restarts a minute later.

    I've found that I can pose the problem of two similar ways:
    1. I open Windows Media Center, and then watch videos, listen to music, etc..  Media Center to close and lock my computer.  Then immediately after, I unlock the computer, the message is displayed.
    2. I have block my computer, then unlock it then (I can do this as many times I love him without the following message is displayed).  As soon as I open Media Center the message appears.

    That there seems to be a problem in lsass.exe or ntdll.dll I pulled copies of my installation disc and ran a MD5 checksum by comparing those in C:\Windows\System32 for those from the installation disc.  There is no difference between them.

    Any help would be greatly appreciated.

    Hmmm, the problem seems to have fixed itself automagically.  I do not even install Windows updates except for the regular update of Windows Defender.

  • Windows 7 RTM SCSI controller?

    For the controller SCSI will not work for the RTM now.

    Hello

    The configuration of your virtual machine seems OK to me, but there are 2 things in your log file that stand out for me.

    The first is a CPU hard reset directly after LSI SAS controller virtual is initialized, but it is may be normal.

    Then, your paper has a large number of these lines:

    Jul 30 08:37:28.383: vmx| CDROM ide1:0: CMD 0x28 (READ(10)) FAILED (key 0x2 asc 0x30 ascq 0)
    Jul 30 08:37:28.383: vmx| VIDE: ATAPI 0x28 Failed: key 0x2, asc 0x30, ascq 0x0
    Jul 30 08:37:28.384: vmx| CDROM-LIN:  readv(/dev/scd0) failed: Read beyond the end of file (9).
    Jul 30 08:37:28.384: vmx| CDROM ide1:0: CMD 0x28 (READ(10)) FAILED (key 0x2 asc 0x30 ascq 0)
    

    that seems to me suggest that your download of Windows 7 RTM was not 100% successful.

    Have you checked the checksum of this disc?

    --

    Wil

    _____________________________________________________

    VI-box tools & scripts wiki at http://www.vi-toolkit.com

Maybe you are looking for