Permutation of HBA330 with H730P controllers

Similar Questions

• Regarding the problem with network controllers

  Hello every1!
  
  I had a problem with the network controllers. I recently installed new windows in my laptop. Ultimate(64-bit) Windows 7 is. Everything was fine, except the LAN drivers. I got a drivers pack solution for drivers. We updated all the drivers except the network controller.

  When I bought my new hp Pavilion g6-1201tx a few years, I had a backup of my DVD players. But, due to virus attack, it has corrupted me n later when I tried to reinstall my windows, I had no option but to the install from the cd of windows 7.

  Now, my problem is that in the notification of networks, it shows that "network controller not installed driver. Even my bluetooth does not detect my wifi personal connection he used to before you reinstall windows. I am not able to find the appropriate driver from the hp site configuration too. His humble request to help me solve my problem regarding.

  Thank you.

  You are the very welcome.

  Here are links to the drivers you need.

  Wireless:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-108905-1&cc=us&DLC=en&LC=en&OS=4063&product=5163244&sw_lang=

  Bluetooth:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-101174-1&cc=us&DLC=en&LC=en&OS=4063&product=5163244&sw_lang=

• Problems of allocation of resources motherboard PCI with PXI controllers

  I set up a test system to a PXI-PCIe8361 controller and a PXI-1042 chassis.  Several years ago, there are known problems with some motherboards on the assignment of the PCI resources.  I looked and could not find more old messages and lists of recommended motherboards.  It seems that ASUS is a manufacturer in order to avoid any Abit and Gigabyte function well.  Is there a list more up-to-date recommended motherboards or manufacturers?  Is it still a problem with the latest motherboards?

  Any information will be appreciated,

  Nick

  Hi Nick,

  PCI resource allocation issues are significantly less common with new mothers/BIOS maps. In situations where this problem always produces a BIOS update usually solves the problem. The best advice I can give if you buy a new computer for connection of MXI must go with a PC and a cell phone, who you are.

  These question is sufficiently rare that we do not maintain a list of manufactures suggested, if you encounter any problems you can call us at the 1-866-ASK-MYNI, and we would be happy to help you.

  Thank you

  Scott M.

• Permutation of shape with precomps layers

  Is there a way to Exchange layers with a demo form? When I try to option-do drag, I get an error, 'layer has no source.  I could comp before each shape layer and then discuss.

  It is, I have hundreds of shape layers that must be replaced. You will need to I really comp before each shape layer?

  A shape, such as a text layer layer, is not a piece of images displayed in the project window, so the trick of opt-drag does not work.

• USB 3.0 issues with Portege Z830 & Renesas electronic drivers

  Hi all

  I have a Toshiba Portege Z830. Until today I have use any pendrive USB 3.0 external. I bought a Kingston HyperX, but when I try to use it, the port recognizes the drive, but disappears in a few seconds...

  Also when I use a port USB 2.0 back, it displays the unit, but it cannot read the contents of the USB drive.

  I checked in internet forums, and I see similar cases, but not a clear solution...

  More information:

  1. the disc works if I restart windows on SafeMode (Windows 7-64 bit)
  2. the disc works on other computers (without electronic drivers Renesas).

  I think it's a problem of Renesas electronic drivers, but I've updated, installed the modern version, power usb change, etc. but no solution...

  This ultrabook is an expensive appliance, as well as the USB key, and of course, this should be a solution...

  Thank you for your help

  Hello

  I downloaded the latest 2.1.28.0 USB 3.0 v driver available from the Toshiba UE driver page.
  The fichiers.ini (64 bit driver) contains information that this USB 3.0 host controller driver is developed by Renesas Electronics Corporation.

  I read a lot about the problems of USB 3.0 as part of different devices to USB 3.
  The questions are not related to a specific manufacturer for laptop or device in most of the cases it s a compatibility issue between the two devices, I think that's most of the time impossible to test all USB 3.0 flash drives, HARD drive, etc. with different controllers USB 3.0 for compatibility problems always seems

  I found a 3rd party page where you can find a few other drivers USB 3.0 of Renesas and NEC. But the use of these drivers is at your risk and perils do not know if they work properly.
  http://www.station-drivers.com/page/Renesas.htm

  I think you might have to force windows to use the specified driver, then first choose "Browse my computer dethrone" and then "Let me pick from a list of device drivers...". ». This must be done in the Device Manager.

  Would be interesting to know how it works

• Problem with getting communication with old instrument GPIB-ENET/100

  Hello!

  I'm trying to get my program in VB.net to communicate with an older instrument (Infratek 305 A, measure of power) via a GPIB-ENET/100 device.

  The manual of the instrument does not say what GPIB standard, it supports, but the instrument is detected by the measurement and Automation Explorer.

  Detected by that I mean that MAE has detected an instrument located on the right GPIB address, but indicated identification is the output measure instrument string

  instead of the name of instrument (as shown for some more recent instruments of Agilent).

  When I run my application, I followed the communication with NISpy.

  Configuration of the device seems to work and I present only once in the program.

  The problem is reading data from the instrument. Whenever I read the data, I get a correct string of the instrument. But the problem is

  I get the same data in two consecutive and all readings first after that I get new data and also these new data are received in two consecutive readings.

  According to the manual of the instrument the instrument generates the data as follows:

  "A row of data ends with CRLF. The instrument can send multiple rows of data. "When all of the data transfer is complete the EOI (end or identify) is sent.

  My endpoint settings are:

  Send EOI to write complete: YES

  Terminate read on EOS: No.

  EOS byte: 2

  8 bit EOS compare: YES

  Define EOI with EOS on write: No.

  How can I configure the GPIB-ENET/100 to work with my instrument?

  Here are som NISpy logs:

  # Configuration #.

  61 ibwrt(UD3, "C0C2C4C8..", 10 (0xA))
  PID: 0x0000113C Thread ID: 0x000008B4
  Departure time: 13:54:43.671 call duration 00:00:00.079
  ibsta: 0 x 100 iberr: 0 ibcntl: 10 (0xa)

  62 ThreadIbcntl()

  PID: 0x0000113C Thread ID: 0x000008B4
  Departure time: 13:54:43.750 call duration 00:00:00.000
  ibsta: 0 x 100 iberr: 0 ibcntl: 10 (0xa)

  63 ibwrt(UD3, "K0K3K5K9..", 10 (0xA))
  PID: 0x0000113C Thread ID: 0x000008B4
  Departure time: 13:54:43.765 call duration 00:00:00.125
  ibsta: 0 x 100 iberr: 0 ibcntl: 10 (0xa)

  64 ThreadIbcntl()
  PID: 0x0000113C Thread ID: 0x000008B4
  Departure time: 13:54:43.890 call duration 00:00:00.000
  ibsta: 0 x 100 iberr: 0 ibcntl: 10 (0xa)

  65 ibwrt(UD3, "F14F18F24..", 11 (0xB))
  PID: 0x0000113C Thread ID: 0x000008B4
  Departure time: 13:54:43.890 call duration 00:00:09.250
  ibsta: 0 x 100 iberr: 0 ibcntl: 11 (0xb)

  66 ThreadIbcntl()
  PID: 0x0000113C Thread ID: 0x000008B4
  Departure time: 13:54:53.140 call duration 00:00:00.000
  ibsta: 0 x 100 iberr: 0 ibcntl: 11 (0xb)

  ### LU ###

  437 ibrd(UD3, "*AC/1.0A480V/...", 1024 (0x400))
  PID: 0x0000113C Thread ID: 0x000008B4
  Departure time: 13:58:52.484 call duration 00:00:00.094
  ibsta: 0 x 2100 iberr: 0 ibcntl: 225 (0xe1)

  438 ThreadIbcntl()
  PID: 0x0000113C Thread ID: 0x000008B4
  Departure time: 13:58:52.578 call duration 00:00:00.000
  ibsta: 0 x 2100 iberr: 0 ibcntl: 225 (0xe1)

  439 ThreadIbcntl()
  PID: 0x0000113C Thread ID: 0x000008B4
  Departure time: 13:58:52.578 call duration 00:00:00.000
  ibsta: 0 x 2100 iberr: 0 ibcntl: 225 (0xe1)

  Hello!

  I don't have the opportunity to test with other controllers.

  However, I found a solution to my problem.

  The instrument should output 4 lines of data.

  L1 - line with comments

  L2 - line with current values

  L3 - line with the values of voltage

  L4 - line with power values

  The first line of the reading stops the instrument of implementation of additional measures.

  The measurements in the instrument began reading the last line of data (L4)

  The problem was that the instrument for a reason any also released a fifth line, which was empty.

  Read this line 5' th stopped the instrument again.

  By configuring the HW to finish reading on EOS, with EOS PMQS, the value byte, I could read the

  buffer of the instrument with a line output instead. This way I could read just L1 - L4

  and the instrument could work again.

  Next time I should read data from the Instr. first of all, I would like to read the empty line, then

  L1 - L4.

  Why the outputs Instr. an additional empty line will be left not resolved.

  My problem is solved.

• PXI-8115 controller incompatible with the PXI-1050 chassis?

  I replaced two XP based PXI controllers with two controllers, PXI-8115 with WIN7 installed on them. System #1 has combined PXI-1010 chassis and System #2 has a combo chassis PXI-1050 chassis. The two 8115 controllers work correctly when it is installed in the #1 system (chassis 1010) do not produce but no video output when it is installed in the #2 system (chassis 1050). I use the same monitor on both systems, as well as the same adapter DisplayPort to VGA supplied with controllers. This suggests some kind of incompatibility between the 8115 and the 1050, but I can't believe I'm the first to connect a 8115 a 1050. Everyone knows about this problem? Y at - it solution or workaround? Is there something I forgot?

  Thank you

  PMAC

  OK, I found a solution but I still don't know why it is the solution.

  Each controller had a "Bizlink" adapter DisplayPort to VGA bundled with it. Of course, I tried two adapters with the same results on both systems. I tried a "Startech" DP to VGA that is used elsewhere in the installation and the system worked well. Why a brand different adapter works is quite confusing.

  For anyone else having this problem try Startech manufacturer DP2VGA.

  PMAC

• What XBOX 360 controller work with a Windows Vista laptop?

  I need to know what Microsoft controller buy who will work with NBA 2 K 10 for PC.
  My computer is a HP Pavilion dv6830us Entertainment Notebook PC.

  I also need to know how and where to buy a new graphics card or how to upgrade a so that the game works more smooth.

  May need a complete redesign of some things and hoped that someone would be able to help me with step by step instructions, because I am panicking about it. Could be a waste of $ 20 if I can't understand something here, given that GameStop does not accept returned PC games. :-/

  A wired remote will work.  A wireless will work also, but only with the "Xbox 360 Wireless Gaming receiver for Windows".  Assuming that the game you are trying to use it with supports controllers. Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet atwindowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• Receiver wireless XBOX 360 will not connect to the controller with Windows XP 32-bit

  I bought the receiver the other day and tried it on my computer. I installed the stuff that came on the disc, no problem. I plugged the receiver and tried to turn on the controller and it simply not picking up the controllers. I tried on all 3 of the controllers that I own, but nothing helped. I looked the problem on google and all say to install the new drivers on the "unknown device", but that doesn't seem to be the issue.   My computer doesn't pick up the 'Xbox 360 wireless receiver for Windows' device no problem. But when I try to sync the receiver with the controllers I get nothing.  He also says that I have driver 2.1.0.1349 if that helps

  Hello

  You can download Xbox 360 Controller for Windows using the following link:

  http://www.Microsoft.com/hardware/en-us/d/Xbox-360-controller-for-Windows

  If the problem persists, I suggest you to contact Xbox support for help.

  http://support.Xbox.com/en-us/contact-us

  I hope that helps!

• USB Dongle Bridge with wireless static IP XP

  My computer is connected to the wireless router that is connected to the switch through which I am to access other computers.

  Whenever I connect my USB dongle to access internet, my offline wireless network but I am still connected to the router!

  Here, I'm limited to use only one network at a time.

  I tried the network bridge, always even (no advanced layout need to be changed?)

  Tried to ICS (ICS should not use this feature in an existing network with domain controllers Windows 2000 Server, the servers DNS, gateways, DHCP servers, or systems configured for static IP addresses)

  
  

  I'd be very happy that can help solve this problem.
  Thank you
  Lachuu
  OS: Windows XP
  Dongle USB: HUAWEI

  Your problem is probably the "metric".  I'm doing this from memory because I don't have a machine XP here, so maybe it's a little different but...
  Go to your network control panel.  There should be an entry for your USB dongle and the other for the wireless.  For each of them, right-click on it and select "Properties".  In the window, scroll down if necessary, and then double-click TCP/IP.  In the next window, click on "Advanced".  There should be a box here that is usually checked that says "Automatic metric.  What you need to do is to uncheck this check box and enter a number in the field "the Interface metric.  Put a different number for your USB dongle interface and your wireless (for example, 5 and 10) interface.  The smaller of the two numbers will be the adapter that will be used for the internet... so if I read your post correctly, the USB dongle must be the lowest numbers.

  As your USB dongle is probably the slowest connection, it probably by default a metric higher and therefore is not selected when you use the default settings.

  "An explanation of the feature of Automatic metric for the routes of the Internet Protocol"
    <>http://support.Microsoft.com/kb/299540 >

  Good luck
  JW

• Two R810s, each with two 8Gb Fiber Channel HBA + MD3620F + MD1220

  Hi people.

  I am planning an installation on this end, and I'm tender hand in the hope that the community can help me carry this all together.

  To explain, I have two servers Dell PowerEdge R810, each with two 8 GB HBA Fibre Channel adapters.

  I also have a Bay SAN of Dell PowerVault MD3620F 8 Gbps, with two controllers.

  I also have a Dell PowerVault MD1220 DAS SAS Expander Bay.

  I think to connects both R810 servers directly to the MD3620F, in order to consume all ports of four CF on the MD3620F. That is, one in each controller, from two HBAs in each server. (I can do this, or do I need a Fibre Channel switch? The MD3620F has 4 available ports, 2 per controller, so it would seem to be a natural configuration for only these two servers)

  Then, I will link the MD1220 to the MD3620F, so that its readers are also accessible through the two R810s on the link of Fiber Channel 8 Gbps. (what is the process to connect a MD1220 to a MD3620F?)

  Thoughts, tips, suggestions?

  Thank you

  -Wentil

  Hello Wentil,

  Here is a link to our deployment guide. FTP://FTP.Dell.com/manuals/common/PowerVault-md3600f_Deployment%20Guide_en-us.PDF . in the deployment guide, we show how you can do an install direct attach & network attached using a fiber switch.

  Please let us know if you have any other questions.

• IP MD3220i address scheme with esxi4.1

  I have a Setup running for awhile. (2 R815 welcomes with 8 iscsi NIC and md3220i with two controllers) I was adding another host and a second iscsi switch which was then looking around to see if the guidelines have changed. In my setup, I have 8 NIC per host. I thought 4 paths to each controller. Is this an overdose? I noticed the leaves dell mentions 4 NICS per host, which would give 2 parallel tracks for each controller.

  Current config:

  Host 1:

  10.10.6.211

  10.10.6.212

  10.10.7.211

  10.10.7.212

  *

  *

  10.10.9.212

  MD3220i

  RC0-1: 10.10.6.101 (Controller raid 0, port 1)

  RC0-2: 10.10.7.101

  RC0-3: 10.10.8.101

  RC0-4: 10.10.9.101

  RC1-1: 10.10.6.201

  RC1-2: 10.10.7.201

  RC1-3: 10.10.8.201

  RC1-4: 10.10.9.201

  Host 2:

  10.10.6.213

  10.10.6.214

  10.10.7.213

  10.10.7.214

  *

  *

  10.10.9.214

  Currently, there is only 1 switch iscsi (bad idea). I'll add a second week next for redundancy. Directions on how can I separate the wiring port-based?

  Can I change my intellectual property regime?

  Now when I turn on repeat alternating on my esxi, I see 4 paths with Active (e/s) for each logical unit number.

  Thank you!

  Note: I have posted this on a different thread, and does not have all the answers. I guess that's maybe because the thread has been answered.

  Hello Nid15,

  Yes you are right you will get 4 GB less than fresh General.

  Please let us know if you have any other questions.

• Gamepad works only with Windows 8? (Logitech)

  I have upgraded to Windows 8, which came preloaded on my Toshiba Satellite C55 - A.  I used to have an old Microsoft Sidewinder Gamepad, but when I upgraded to Windows 8, it only pulled upward and to the left and was completely useless.

  I threw this gamepad outdoors, assuming it was the problemand just bought a new extreme of Logitech Pro 3D.  He... has the same problem.  I was directed here by a hotline.

  It is obviously a problem of Windows 8, not a hardware problem, as it happened in the same way with two controllers.

  Help, please!

  Dear d. Schwartz,
  I ask you kindly to click on the link below to install Extreme 3D Pro Joystick driver for 64-bit Windows 8.

  http://www.Logitech.com/pub/techsupport/joystick/lgs510_x64.exe

  Kindly let me know if it works.
  Kind regards
  Amith Malherbe

• Please help me with iSCSI software initiator setup in ESX.

  Greetings,

  I have a DELL MD3000i SAN with two controllers. Each controller has both for the multipath iSCSI network interface cards.  I've always used CF so I'm a little nervous in the implementation of iSCSI network on ESX. Please help me.

  Controller 1 port 1 is the IP 192.168.253.2

  Controller 1 port 2 is the IP 192.168.254.2

  2 1 joystick port is the IP 192.168.253.3

  2 2 joystick port is the IP 192.168.254.3

  I have Setup VLANS on my level 3 for switch vlan 253 and 254.  IP addresses are 192.168.253.1 and 192.168.254.1 respectively.

  My goal is to set up a fully redundant connection with failover support, but I can't enter the network on ESX configuration.

  I intend using two network adapters in an active / standby (one active NETWORK card on a VLAN, put on hold for the other and vice versa) configuration.

  Can someone please tell me exactly what to do to ensure the fully redundant connectivity?

  Thank you in advance.

  Yes. This look is good so far.

  http://blog.laspina.ca/

• problems with reinstalling xp pro on replacement hard drive

  I have a Dell Dimension 8400 purchased in 2005. I am trying to replace the old hard drive (SATA, WD, 250 G) with a similar (same room, only 500 G). After many difficulties, I had a bootable CD and was able to start with the new drive in, and I started to reinstall XP. But halfway through, he started to say various files were missing, and the installation worked properly - XP starts to load, then a get a blue screen and error message.

  Has been the problem with the partition of the drive? With the file system? With missing controllers?

  A reinstallation is possible with the Dell XP?

  There a better way to do it, by copying the old disk to the new disk image? Which copy on XP properly?

  I have spent hours on this problem so far and would welcome any advice.

  Several people seem to have had similar problems, but do not know if they are exactly the same questions.

  Thank you