Permutation of Interfaces of child object in a sous-schema control

Similar Questions

• child object clickable

  I have added a click on a child object that is not always displayed event

  Her pearent object also has on the click event.

  There are two problems.

  1)

  Whenever I click on the child object onclick pearents behavior runs as well. I don't want to do.

  2)
  The object of the child can be clicked on even though I have set its alpha to 0, or its display property set to false or send it to the back of the stage. In other words, that its behavior can be invoked by the user, even if it is not visiable

  to say it another way

  I'm not the subject of the child to be clickable, when it is not displayed
  I don't want the subject of pearent be clickable through the child object

  How to solve these problems?

  1. use the method stopImmediatePropagation() of mouseevent in your child

  2. give your child mouseEnabled property to false, remove of the displaylist or set its visible property to false.

• problem of child objects

  Are there the AS3 command to disconnect a child object of the object and then pearents him plugging in
  I want to use for tempoarilly stop a child his pearents inhereting rotate property.

  removeChild() and addChild() will work.

• Canvas, click events for the child objects

  I am trying to record an event for each child object.
  and I use the following code
  
  http://livedocs.Adobe.com/Flex/3/HTML/Help.HTML?content=events_08.html
  in the part of the examples (second example)
  
  However, I am dynamically add custom Image objects extended and when click on a displayed Image and check for its type if its correct type, it would just return false.
  Alert.Show ((event.target_est_dans_MyAClass).toString ());
  
  When clicking on one of the children is opposed and display the event.target.name and it's just also displays a silly 'FlexLoader74' or whatever number. Somehow, it loses its properties or the type of the object.
  
  Is there something that I am missing?

  The loaded image, you click on IS what would return with event.target. It is added to your image class extended as a child of this class. So it's probably that you want to do:

  Alert.Show ((event.target.parent_est_dans_MyAClass).toString ());

  Keep in mind that if EMBED you your images in your image personalized instead compile-time class, then you can check for this as you did before:

  Alert.Show ((event.target_est_dans_MyAClass).toString ());

  TS

• Add a child or a MCcontainer of a control class calendar

  Hello

  Alas, I'll still have some migration issues to AS3...

  How can I add a child object to an empty movieClip already placed in the timeline panel. Something like that.

  in the first timeline picture it is an empty instance of the MC named 'clipInTimeline' and in framescript I call:

  Import assets.contentControl;

  var getContents:contentControl = new contentControl();

  Did you deposit:

  the contentControl {} package

  ...

  function contentControl (): void {}

  var xxx:MovieClip = new MovieClip();

  clipInTimeline.addChild (xxx);

  clipInTimeline.gotoAndStop (5);

  }

  }

  In AS2 is so much easier to control and access to other objects. This AS3 architecture and methods are absolutely crazy.

  All that I could google for said I can't control or access timeline and objects on it with ACE?

  Thanks in advance.

  AS2 is certainly not easier... you just know that better, that's all. AS3 is much better in all directions... give it time. What you read on Google is not being able to reach the code directly on objects-which is good - you never should have done this in AS2 either. This is code that is hard to read and hard to find.

  Anyway, you can not access your timeline object in the example you gave is because you simply make an instance of your contentControl class - it has no reference to the timeline, then clipInTimeline is simply not defined in the context of your class. Only when you use the document class you have direct access to the timeline objects.

  You can solve your problem just by passing a reference to the timeline as follows:

  function contentControl(stageRef:MovieClip):void

  {

  var xxx:MovieClip = new MovieClip();

  stageRef.clipInTimeline.addChild (xxx);

  stageRef. clipInTimeline.gotoAndStop (5)

  and in your first code framework:

  var getContents:contentControl = new contentControl (this);

  In addition, the class names (IE types) should always begin with a capital letter. ContentControl, not contentControl.

• Creating objects with their corresponding schemas or as SYS

  Hi all
  
  Which is preferable? Creating objects with their corresponding schema/username, or simply use SYS to create all objects? Y at - it an advantage or a disadvantage? Are all best practices regarding that?
  
  For example, I have to create several objects in several different schemas (hr, oe, scott, Bishop). I could either connection in each schema individually and create objects, OR I could just connect as SYS as create them all at once. Is there any problem with the latter approach?
  
  Thank you.

  The rule was stated by Oracle years... do not connect as SYS... ever... except for purposes of maintenance or backup with RMAN.

  Advice is always to create the schema of the application, log in as the owner of the application, and create objects as long as this user. Do not follow this advice, all to often, end us with the created objects where they belong... often clues belonged to SYS.

• InDesign fails to operate correctly on some files. Flashing user interface and deselecting objects.

  I use the latest version of InDesign (10.0.0.70) on the latest version of Mac OS x (10.9.4).

  Recently I had a problem with InDesign that affects only certain documents. Sorting of the interface of flashes every few seconds as part of the application is to be deselected and then again selected. Every time that happens (about 4 seconds) all I was doing is deselected, so if I'm dragging an object he snaps back on where she has been and is disabled or if I entered a value in an input box the box is deselected and reset. I think you can imagine how this can make it pretty unusable InDesign.

  The problem does not occur on all documents, but I was unable to find a link between the files that it it not the. Sometimes it occurs on a totally blank document that has just been created and other times, it will be fine. Files that it occurs on her stick and always happens with these files, if I copy the contents of the file in a new document that is not affected the problem, temporarily disappear but happen again after some time or next time I open the file. Save the file as an IDML does not make the problem disappears, he wears it. Remove all the elements and all of the pages on the affected file does not solve the problem either.

  The problem seems to only occur on one file at a time, if I have several files open only one of them is touched, if I open two files in the same time, one of them will be fixed and the problem will go away when the file is active, then return when I switch back to it. If I then close one of the files the problem re will affect the file.

  Copy the file affected server I work outside and to open it from my office doesn't change anything.

  I work in a studio with five other Mac all running the same version of OS x and InDesign, none of the others are affected by the present at all. My Mac is old for a few months only and the newest of the lot, I don't have something different installed above the rest.

  I tried completely removing InDesign and creative cloud and do a new installation that has not solved the problem.

  Looks like you have an Extensis font manager. Disable the plugin of automatic activation and complain that Extensis.

• How to configure the application for child object View?

  I have a hGrid standard layout. Two display objects are present, sign in using the link display. I need to define where clause in the child View object. The changes themselves do not appear when I put the where the clause. Also when I try to extract rowCount returns 0 for child View object. But I'm able to get the parent View object value. Any suggestions please.

  Hi Shrikant,

  Thanks for your replies. I was able to find a solution. Was able to achieve thanks to the functionality of the rowset.

  Kind regards
  Pradeep

• [JS] A new child object

  Hello

  I may be question of a beginner-how can I define a new object (i.e. the polygon) as a child of an existing rectangle? (If the new object is placed in an existing one.) I am able to do this by cutting and by pasting in but I do not like it.

  TIA

  Rectangles have a collection of polygons, you can do:

  myRectangle.polygons.add)

  You will need to provide the appropriate parameters for the call of the add() method.

  Dave

• How to access the child object of a movieclip

  Hi, I made the pictures dynamically and I access Bastien is child movieclip

  var totalThumbs:Array = new Array()

  var ThumbMC:MovieClip()

  var childThumb:MovieClip()

  var xpos:Number = 10

  for (var i: Number = 0; i < 10; i ++) {}

  ThumbMC = new thumbOb() //thumbOb is the movieclip in the library class

  addChild (ThumbMC)

  ThumbMC.x = xpos

  childThumb = new animationclip() //animationclip is the movieclip in the library class

  ThumbMC.addChild (childThumb)

  ThumbMC.addEventListener (MouseEvent.Click, thumbClick)

  XPos += 100

  }

  function thumbClick(event:MouseEvent):void {}

  event.target.childThumb.gotoAndPlay ("clicked") < < THIS ERROR SHOWING

  }

  There are a number of errors in what you show so I have to imagine that you are not in strict mode minimum of coding.  You should avoid using event.target and event.currentTarget are using, otherwise you are likely to find the target, it's not what you expect it to be.  currentTarget is always linked to the object that has the assigned listening port, not children of that object (using target may end up doing).

  When you add dynamically content, targeting usual syntax parent.child does not work.  You start to use other means of access to the child.  One way is to store the child in another reference (like a table) and directly target.  Another way would be to use the getChildByName() method... Here is an example of using this approach...

  var xpos:Number = 10;

  for (var i: Number = 0; i<10;>
     
  var ThumbMC = new thumbOb();  thumbOb is the class movieclip in the library
  ThumbMC.num = i;
  addChild (ThumbMC)
  ThumbMC.x = xpos
     
  var childThumb = new animationclip() //animationclip is the movieclip in the library class
  childThumb.name = "childThumb" + String (i)";
  ThumbMC.addChild (childThumb)
     
  ThumbMC.addEventListener (MouseEvent.CLICK, thumbClick)
  XPos += 100
  }

  function thumbClick(event:MouseEvent):void {}
  var childThumb is MovieClip (event.currentTarget) .getChildByName ("childThumb" + String (event.currentTarget.num));.
  childThumb.gotoAndPlay ("clicked");
  }

• follow the child objects of the cluster and to highlight

  Hello

  Is it possible to highlight various objects inside a cluster instead of the entire cluster?  I noticed that I was able to navigate a single object to the next using the tab key, but I would like to highlight several objects.  My goal is to validate user input and show them where they had entered incorrect.

  Thank you

  Here are some inspirations:

  

  I don't think it's possible to highlight several items at the same time.

  Tone

• How can I access NavigatorContent child object?

  

  Hi all.

  In this code, how can I access object "lbl"?

  I am very new to flex. Please help me.

  Thanks to advanced and sorry for my English.

  Kevin.

  Hello

  Pls use suite access object code

  http://ns.Adobe.com/MXML/2009.

  xmlns:s = "library://ns.adobe.com/flex/spark".

  xmlns:MX = "library://ns.adobe.com/flex/mx" minWidth = "955" = "600" minHeight >

  Import mx.controls.Alert;

  Import mx.controls.Label;

  Import spark.components.NavigatorContent;

  private var num:Number = 1

  private void perform (): void

  {

  var nav:NavigatorContent = new NavigatorContent();

  var lbl:Label = new Sun;

  LBL. Text = num. ToString();

  NUM ++;

  nav.addElement (lbl);

  myTab.addChild (nav);

  }

  private function changeText (): void {}

  for (var i: int = 0; i

  var navContent:NavigatorContent = NavigatorContent (myTab.getElementAt (i));

  for (var i: int = 0; i

  navContent.getElementAt (i)

  Alert.Show ("" + navContent.getElementAt (i));

  }

  }

  }

  ]]>

  Thank you

  Atul ([email protected])

• Remove parent, child objects. need help

  Main_MC (parent) +.

  | ___child1 +.

  |              | _ Child1

  |

  | ___child2 +.

  |              |

  |              |                       | __child1

  |              |                       | __child2

  |              | ___child1 + _ | __child3

  |              |                       | __child4

  |              |                       | __child5

  |              |

  |              |

  |              |

  | ___child3 +.

  If you need delete all children in the hierarchy, use the recursive method calls. For example:

  var mc:MovieClip = new MovieClip();
  removeChildren(mc);
  function removeChildren(d:DisplayObjectContainer):void {
        var child:DisplayObject;
        while(d.numChildren > 0){
            child = d.getChildAt(0);
            if (child is DisplayObjectContainer) {
                    removeChildren(child);
            }
       d.removeChild(child);
       }
  }
  

• ScrollPane - child objects Clip?

  Is there a way to add dynamicially graphical objects to a list view which has

  JPG backbound image is in and have ScrollPane automaticially

  manage the scroll and the clip for all of the objects (the JPG to base and 3

  dynamicially graphics objects created?

  I have create a ScrollPane (myScroll) and give it a .jpg of source file.

  Then I create some graphic objects (myRec) and add them as children of myscoll,.

  myscroll.addChild (rec);

  All displays fine but the objects do not scroll with the JPG automaticially?

  Is he a subcomponent of the myscroll I should call in the addChild call it

  will get them in a list of objects to be scrolling etc / cut out along with the

  JPG of base?

  Note - I don't put listeners on the scroll events and can get items to scroll by

  post y setting manually. I built even clip for each obects rectangles and

  Set them to clip correctly around the main scrolling window...  But all this seemed

  As a major HACK...  Is not just a simple way to get these objects in a view

  list as well as the JPG source?

  If you load your bitmap image, add his charger to an empty sprite or movieclip that you assign as the source for your scrollpane component.  You can then add more children to the sprite or movieclip.

• My child allows to bypass the parental control

  My child to bypass the parental control on his Macbook Air using the method presented in this video tutorial. Is there a way to avoid this? https://www.YouTube.com/watch?v=Br6wKR28jFo

  With the text of the video section, the way used by the author to exploit the single user Mode

  command line is specified; and it has been done before. Don't know if there are more recent methods

  to try to deter the child since the creation of their own Admin account to bypass the controls that

  those already discussed adjacent older sons, like this:

  How to stop a person setting up an administrative account duplicate (hackmac)?

  Although it is possible to learn how and use the Open Firmware password, to attempt to get the Admin acct

  This could also be overcome by a particular person looking to exploit a work around physical access.

  In the past, some computer models were easier to open and to perform tasks that could derail this method.

  Almost any iFixit or removable guide could be useful for a particular child or student, as a work-around.

  See suggestions on how to apply the Firmware password, as well as the means to

  block access to the material or the way to reset the admin by OS X Recovery password, in news

  OS X versions that use this partition and its utilities. It is part of the problem with the Admin

  operation, the user is physical access to the computer. And why remotely hacking is very difficult.

  • Use a password of the firmware on your Mac - Apple Support

  While I have no other suggestion (knowing that there could be a fairly simple method to work around the)

  and most have been published online for several years) I hope that someone will see & respond to your

  question with any method you can implement. Or see if an Apple Store genius bar can help you

  This question, because it creates problems. I'd be sure to make an appointment to discuss this at the store.

  If no official Apple retail Store is available, you should perhaps consider a call to Apple support or use a

  online chat. Don't forget to mention details about the build year computer, etc. & the version OS X in it.

  • Make an appointment at an Apple Retail Store Genius Bar
  • Find an Apple authorized service provider

  You can choose to make submissions directly to Apple's comments on this issue, if you find that it is not effective

  method of maintenance determined children or young adults to change their own Admin computer.

  One of the comments below links is probably more suited to this topic than the other:

  • Support Feedback

  • Products return

  Contact Apple support

  http://www.Apple.com/contact/

  Need service or support? Start your online application and we will find a solution.

  More ways to get help:

  • Contact iTunes Store support
  • U.S. iPod, Mac and iPad technical support: (800) APL - care (800-275-2273)
  • Technical support for iPhone in the United States: (800) MY-IPHONE (800-694-7466)
  • See all phone numbers around the world

  Since there is no response when I first noticed your thread, I asked guests move it more appropriate

  location for visibility in these discussions of support; so they chose to put it in the section of MacBook Air.

  Good luck in this case!