Peut funtion Vmotion and Storage Vmotion with Intel and AMD hosts within the same cluster

Similar Questions

• Can you have v4.1 and v3.5 hosts in the same cluster?

  Can you have v4.1 and v3.5 hosts in the same cluster?  Before that I have to try, I thought I would check.  It would be only temporary until all hosts are upgraded.

  > Yes, 3.5 and 4.1 can coexist.

  But they can be managed vcenter 4.1 only, and you must leave the old license server for 3.5 hosts.

  ---

  MCITP: SA, MCTS Hyper-V, VMware vExpert, VCP 3/4

  http://blog.vadmin.ru

• Mix of ESX 3.5 and VMware ESX in the same cluster

  Hello

  I'm currently involved in ESX 3.5 Migrating virtual machines to a new vSphere environment.  All ESX 3.5 hosts running on obsolete kit and will be decomm had at the end of the project.  All hosts are managed by the same server vCenter.

  The only problem is, I have to add an additional ESX4 server, but there is not enough available physical switch ports.  I have decomm one ESX3.5 servers in order to free ports, but they run at 2 knots, and I will lose redundancy if a hardware problem arises.

  My proposed Solution: -.

  I think decomming ESX3.5 host 1 and move it to the new vSphere cluster.  The type of brand/model/CPU is different between the old and the new servers and I am not concerned by VMs DRS'ing between 2 environments, however, I understand that I have would be protected by HA if anything disastrous happened.  All hosts are connected to the same storage.

  You don't see any problem with that?

  You can have a mixed cluster, but this must be managed by vCenter 4.x.

  And you also need a license for the former hosts of 3.x server.

  HA will work.

  If the CPU is compatible VCA, then as VMotion, DRS, VCA will work.

  André

• BT and WLAN works within the same radio frequency range?

  Damage Bluetooth and wireless LAN operated in the same frequency range and may interfere with each other

  I do what is not your problem, but the fact is that you can use both devices at the same time. And it works perfectly.
  Just for example: I hear web radio, use a BT headset and my laptop is connected to WIFI. No problem at all.

• I forgot my password for apple and have permission to stage the 2 and broken my old phone and do not have the same number of what I can do my account is already waiting to be reset, but it takes apple long to to deal with the what else is there to do?

  I forgot my password for apple and have permission to stage the 2 and broken my old phone and do not have the same number of what I can do my account is already waiting to be reset, but it takes apple long to to deal with the what else is there to do?

  You know the e-mail password what do you use? I lost over $ 30 on my old Apple ID because I couldn't get into the email and apple would not transfer my money to my new account.

• He would work to have 3.2 and 4.2 on the same server of db with different web servers?

  Hello

  I have three existing environments which are 11g and Apex 3.2 on Linux (Dev, Test, Prod). I have also three front-end web servers that are Windows 2003 with IIS for Apex (Dev, Test, Prod)

  We have three new Windows servers running 2008 we upgraded to.

  So, my question is on the upgrade of Apex to 4.2 at the same time. I would like to have the new Windows Server (Dev), and then point to the same server to Linux as my old Windows 2003 db. And it points to the same instance of db. My goal would be to achieve production with this configuration and then just do a redirect to URL on the old Windows 2003 server and that it points to the new Windows Server 2008. In this way, that I wouldn't need to move data from one instance to another.

  Would this work? I have installed 3.2 and 4.2 on the same instance of db? A 3.2 Windows Server and have a pointed Windows 4.2 server on the same back-end server?

  APEX lives on the database instance. Run you the APEX on the database upgrades. The short answer to what I think is your question is No.

  I don't know what is the relevant motivation?

• So, I have creative cloud... It came with Photoshop and Lightroom... could I uninstall Lightroom and install Illustrator for the same price?

  It came with Photoshop and Lightroom... could I uninstall Lightroom and install Illustrator for the same price?

  No, you can not install Illustrator instead of Lightroom. You can buy Adobe Illustrator creative Cloud app unique: pricing and membership creative cloud plans | Adobe Creative Cloud

• I have a problem with activating photoshop elements 14 upon activation of the server responses me that I am not bound. I start again and I still got the same message! I use a pc with windows 10 pro

  No response to my problem

  Amy_Wong

  I have a problem with activating photoshop elements 14 upon activation of the server responses me that I am not bound. I start again and I still got the same message!

  !

  Solutions to connection errors, activation and connection with creative Cloud applications and Creative Suite.

• When I click on the download button opens a page with three small boxes, and I think that this means a wait, but they lasted more than two hours, unfortunately and I tried many things and each time gets the same, I work now want photoshop required a

  When I click on on the download button opens a page with three small boxes, and I think that it means a wait, but they lasted more than two hours, unfortunately and I tried much and each time gets the same thingit's working now, I want photoshop necessary and reminders even when I tried to buy the same thing happened to me Please I want to a quick solution

  Make sure that you have enabled cookies and clear your cache.  If he continues to not try to use a different browser.

• esxi Network Setup 4 and esxi 5.5 the same

  Hello

  We have a customer with the following network configuration (see picture). They run ESXi and vCenter 4.0.

  We have added a new separate system with ESXi and vCenter 5.5 and to set up the network, the same.

  My question is this service console, I can't to be able to set this up, it's that are not part of ESXi 5.5?

  If you see the other image, I configured 2 one for management and one for vMotion VMkernel Port, they will be on the same network.

  Would that be correct?

  I don't mind not the network adapters are not connected again... and another thing must use active active alle 4 cards?

  Old configuration

  

  New configuration

  

  Since the release of vSphere 5, he didn't there no Service Console more... the management can be performed via VMkernel port with active management traffic.

  About vmnic design, my recommendation is:

  vSwitch0:

  For vMotion PortGroup - vmnic0 Active and standby vmnic3

  PortGroup management - vmnic3 Active and standby vmnic0

  vSwitch1:

  PortGroup for VMS - vmnic1 Active and active vmnic2

• Satellite A200 - 14 d - i.LINK and FireWire - it's the same thing?

  Hi, guys :)

  Well, I'm about accurately - and a new external hard drive My Book by W * digital Stern (the Studio Edition with 1 TB of storage).
  So I have a Toshiba Satellite A200 - 14 d. I read in the manual to my laptop it has port i.LINK (IEEE 1394-a).

  Ext.hard My Book drive has FireWire 400/800. I read on the internet that FireWire and i.LINK are the same for the IEEE 1394 standard.
  They're just different names. i.LINK is by S * ny and FireWire is by Ap * the Inc. Because I'm not sure I would ask here: if I connect an external device (in my case - ext.hard drive) which is supposed to be with the ability to connect via FireWire 400/800 to my laptop i.LINK port, there will be a kind of incompatibility?

  Thanks in advance!

  Hello

  Yes, i.Link, firewire or IEEE 1394 has the same meaning. ;)

  See this Wikipedia article on firewire:
  http://en.Wikipedia.org/wiki/FireWire

  Welcome them

• Is possible let activate domain multi UCS VM - FEX and sign up for the same vCenter

  Hi Experts,

  We have 7 domain UCS. But only a vCenter. Now, we want to enable VM - FEX on each UCS area and sign up for the same vCenter. Is - it work? I have found no description limit configuration on this relationship.

  Or we create 7 vCenter for each UCS area? (But I think it's not sense.)

  Best regards
  Meng-Yuan Hsieh (Nick)

  Hi Moua!

  I open a TAC case on that, and after that many discussions with Cisco, connecting several areas a single vCenter UCS is supported.  However, it turns out that Cisco failed to document this and how to make it work.  You will find that the procedures were written in old documentation for VN-LINK and others for VM - FEX.  This documentation shows that it is necessary to create new certificates, and it must match the key to expansion.  This is NOT true nor with the new versions of UCSM and vCenter.  Cisco, said they will update their documentation.

  Here are the steps that we took to connect two UCS areas for the same vCenter using default self-signed certificates.  I hope this helps...  Please mark this message as the right answer when you get a chance.  Thank you!!

  vCenter Version: 5.5

  UCSM Version: 2.2(5a)

  1. On the VM in UCS Manager tab, click VMware.
  2. Set up a key of the unique extension for every area of UCS.
  3. Click on "Configure VMware integration" on each area of UCS and export expansion of local storage.
  4. Install each UCS domain extensions in vCenter.
  5. After you install the extensions, back to UCSM and click Next where you left off in configure integration with VMware
  6. Run the wizard and after that it's over, areas of the UCS should now be connected to the vCenter.

  

• IS the UUID and device ID is the same?

  Dear team,

  Ask you to help me with the following queries?

  Q1:-UUID and device Id is the same?

  Q2:-peripheral Id comes from storage array to a LUN?

  Q3:-is the UUID provided by an ESX Server, then this ESX Server to identify this LUN?

  Q4 :-UUID is also called or refers signature ESX?

  Concerning

  Mr. VMware.

  Hello

  in general, the signature should not change in a scenario you desrcibed.

  The ESX host allows you to create a data store VMFS on this LUN collects information provided by the table.

  This information will be used to generate a signature (the process itself is still not published by VMware).

  The signature itself is stored in the VMFS data store and is always used when the Renumeriser SCSI operations.

  Whenever an ESX Server perform a reboot or rescan operation, the following procedure will be used (high level).

  The ESX Server will

  • analyze the SCSI bus and collects information for SCSI on any device seen
  • Search for an existing partition table and the types of known partitions
  • for each VMFS data store found it will read the signature
  • checks if the signature matches with SCSI information
    • matches, continue to accumulate the VMFS datastore
    • does not, this VMFS datastore is not mounted automatically because it is identified as an "instant" feature

  So you could access easily other ESX servers on this device when each ESX Server does not see the device with the same SCSI information.

  As a best practice, each server ESX shoud see such device shared with the same LUN ID.

  The modern paintings are capable of presenting storage devices with different LUN ID in an initiator (HBA) basis.

  Another thing to keep in mind that ports in frontend used table use the same Port SCSI/flag settings, but these indicators may differ between vendors.

  If these two basic requirements are met, you will be able to share the easy storage device between multiple ESX servers.

  Kind regards

  Ralf

• Can I create different consistency nodes in the same cluster with defferent?

  Can I create consistency different nodes in the same cluster with defferent cache - config.xml file?
  A cache can be distributed in these nodes of deffirent?

  Yes. You can create different consistency nodes in the same cluster with cache files - config.xml defferent as long as you use the same file tangosol - coherence.xml and the same file tangosol-coherence - override.xml. But you can't store the data in the cache in the various nodes (created with different cache-config file). In other words, a node only to create their own Hide modes that are launched with the same cache file - config.Xml.

  See the following demo:
  I start a cache using the cache config examples-cache file server - server.xml. Then I start a console cache storage-disabled people (client cache) by using the config file coherence-cache cache - config.Xml. Two of them using the same file tangosol - coherence.xml and the same file tangosol-coherence - override.xml.
  The cache server uses a cache service PartitionedPofCache. But the client side using the Distributedcache service. The cluster address is same 224.3.5.2.
  The name of the cluster is also samme. They know.

  D:\coherence\lib>D:\examples\java\bin\run-cache-server.cmd

  D:\coherence\lib>D:\examples\java\bin\run-cache-server.cmd
  The system cannot find the file D:\coherence.
  The system cannot find the file C:\Oracle\Middleware\jdk160_11.
  2009-12-22 12:09:31.400/4.987 Oracle Coherence 3.5.2/463  (thread=main, member=n/a): Loaded operational configurat
  ion from resource "jar:file:/D:/coherence/lib/coherence.jar!/tangosol-coherence.xml"
  2009-12-22 12:09:31.450/5.037 Oracle Coherence 3.5.2/463  (thread=main, member=n/a): Loaded operational overrides
  from resource "jar:file:/D:/coherence/lib/coherence.jar!/tangosol-coherence-override-dev.xml"
  2009-12-22 12:09:31.470/5.057 Oracle Coherence 3.5.2/463  (thread=main, member=n/a): Optional configuration override
   "/tangosol-coherence-override.xml" is not specified
  2009-12-22 12:09:31.540/5.127 Oracle Coherence 3.5.2/463  (thread=main, member=n/a): Optional configuration override
   "/custom-mbeans.xml" is not specified
  
  Oracle Coherence Version 3.5.2/463
   Grid Edition: Development mode
  Copyright (c) 2000, 2009, Oracle and/or its affiliates. All rights reserved.
  
  2009-12-22 12:09:33.864/7.451 Oracle Coherence GE 3.5.2/463  (thread=main, member=n/a): Loaded cache configuration
   from "file:/D:/examples/java/resource/config/examples-cache-config.xml"
  2009-12-22 12:09:39.983/13.570 Oracle Coherence GE 3.5.2/463  (thread=Cluster, member=n/a): Service Cluster joined t
  he cluster with senior service member n/a
  2009-12-22 12:09:43.187/16.774 Oracle Coherence GE 3.5.2/463  (thread=Cluster, member=n/a): Created a new cluster
  "cluster:0xD3FB" with Member(Id=1, Timestamp=2009-12-22 12:09:38.06, Address=192.168.8.80:8088, MachineId=24656, Locatio
  n=process:144, Role=CoherenceServer, Edition=Grid Edition, Mode=Development, CpuCount=1, SocketCount=1) UID=0xC0A8085000
  000125B75D888C60501F98
  2009-12-22 12:09:43.508/17.095 Oracle Coherence GE 3.5.2/463  (thread=Invocation:Management, member=1): Service Mana
  gement joined the cluster with senior service member 1
  2009-12-22 12:09:46.582/20.169 Oracle Coherence GE 3.5.2/463  (thread=DistributedCache:PartitionedPofCache, member=1
  ): Service PartitionedPofCache joined the cluster with senior service member 1
  2009-12-22 12:09:46.672/20.259 Oracle Coherence GE 3.5.2/463  (thread=DistributedCache:PartitionedPofCache, member
  =1): Loading POF configuration from resource "file:/D:/examples/java/resource/config/examples-pof-config.xml"
  2009-12-22 12:09:46.702/20.289 Oracle Coherence GE 3.5.2/463  (thread=DistributedCache:PartitionedPofCache, member
  =1): Loading POF configuration from resource "jar:file:/D:/coherence/lib/coherence.jar!/coherence-pof-config.xml"
  2009-12-22 12:09:47.734/21.321 Oracle Coherence GE 3.5.2/463  (thread=main, member=1): Started DefaultCacheServer.
  ..
  
  SafeCluster: Name=cluster:0xD3FB
  
  Group{Address=224.3.5.2, Port=35463, TTL=4}
  
  MasterMemberSet
    (
    ThisMember=Member(Id=1, Timestamp=2009-12-22 12:09:38.06, Address=192.168.8.80:8088, MachineId=24656, Location=process
  :144, Role=CoherenceServer)
    OldestMember=Member(Id=1, Timestamp=2009-12-22 12:09:38.06, Address=192.168.8.80:8088, MachineId=24656, Location=proce
  ss:144, Role=CoherenceServer)
    ActualMemberSet=MemberSet(Size=1, BitSetCount=2
      Member(Id=1, Timestamp=2009-12-22 12:09:38.06, Address=192.168.8.80:8088, MachineId=24656, Location=process:144, Rol
  e=CoherenceServer)
      )
    RecycleMillis=120000
    RecycleSet=MemberSet(Size=0, BitSetCount=0
      )
    )
  
  Services
    (
    TcpRing{TcpSocketAccepter{State=STATE_OPEN, ServerSocket=192.168.8.80:8088}, Connections=[]}
    ClusterService{Name=Cluster, State=(SERVICE_STARTED, STATE_JOINED), Id=0, Version=3.5, OldestMemberId=1}
    InvocationService{Name=Management, State=(SERVICE_STARTED), Id=1, Version=3.1, OldestMemberId=1}
    DistributedCache{Name=PartitionedPofCache, State=(SERVICE_STARTED), LocalStorage=enabled, PartitionCount=257, BackupCo
  unt=1, AssignedPartitions=257, BackupPartitions=0}
    )
  
  2009-12-22 12:12:29.737/183.324 Oracle Coherence GE 3.5.2/463  (thread=Cluster, member=1): Member(Id=2, Timestamp=20
  09-12-22 12:12:29.541, Address=192.168.8.80:8089, MachineId=24656, Location=process:1188, Role=CoherenceConsole) joined
  Cluster with senior member 1
  2009-12-22 12:12:30.498/184.085 Oracle Coherence GE 3.5.2/463  (thread=Cluster, member=1): Member 2 joined Service M
  anagement with senior member 1
  2009-12-22 12:12:31.860/185.447 Oracle Coherence GE 3.5.2/463  (thread=Cluster, member=1): TcpRing: connecting to me
  mber 2 using TcpSocket{State=STATE_OPEN, Socket=Socket[addr=/192.168.8.80,port=8089,localport=2463]}
  2009-12-22 12:12:51.338/204.925 Oracle Coherence GE 3.5.2/463  (thread=Cluster, member=1): Member 2 joined Service D
  istributedCache with senior member 2
  

  The following command starts a cache client.
  D:\coherence\bin>coherence.cmd

  D:\coherence\bin>coherence.cmd
  ** Starting storage disabled console **
  java version "1.6.0_11"
  Java(TM) SE Runtime Environment (build 1.6.0_11-b03)
  Java HotSpot(TM) Server VM (build 11.0-b16, mixed mode)
  
  2009-12-22 12:12:21.054/3.425 Oracle Coherence 3.5.2/463  (thread=main, member=n/a): Loaded operational configurat
  ion from resource "jar:file:/D:/coherence/lib/coherence.jar!/tangosol-coherence.xml"
  2009-12-22 12:12:21.355/3.726 Oracle Coherence 3.5.2/463  (thread=main, member=n/a): Loaded operational overrides
  from resource "jar:file:/D:/coherence/lib/coherence.jar!/tangosol-coherence-override-dev.xml"
  2009-12-22 12:12:21.365/3.736 Oracle Coherence 3.5.2/463  (thread=main, member=n/a): Optional configuration override
   "/tangosol-coherence-override.xml" is not specified
  2009-12-22 12:12:21.415/3.786 Oracle Coherence 3.5.2/463  (thread=main, member=n/a): Optional configuration override
   "/custom-mbeans.xml" is not specified
  
  Oracle Coherence Version 3.5.2/463
   Grid Edition: Development mode
  Copyright (c) 2000, 2009, Oracle and/or its affiliates. All rights reserved.
  
  2009-12-22 12:12:29.316/11.687 Oracle Coherence GE 3.5.2/463  (thread=Cluster, member=n/a): Service Cluster joined t
  he cluster with senior service member n/a
  2009-12-22 12:12:29.356/11.727 Oracle Coherence GE 3.5.2/463  (thread=Cluster, member=n/a): Failed to satisfy the
  variance: allowed=16, actual=20
  2009-12-22 12:12:29.356/11.727 Oracle Coherence GE 3.5.2/463  (thread=Cluster, member=n/a): Increasing allowable v
  ariance to 17
  2009-12-22 12:12:29.807/12.178 Oracle Coherence GE 3.5.2/463  (thread=Cluster, member=n/a): This Member(Id=2, Time
  stamp=2009-12-22 12:12:29.541, Address=192.168.8.80:8089, MachineId=24656, Location=process:1188, Role=CoherenceConsole,
   Edition=Grid Edition, Mode=Development, CpuCount=1, SocketCount=1) joined cluster "cluster:0xD3FB" with senior Member(I
  d=1, Timestamp=2009-12-22 12:09:38.06, Address=192.168.8.80:8088, MachineId=24656, Location=process:144, Role=CoherenceS
  erver, Edition=Grid Edition, Mode=Development, CpuCount=1, SocketCount=1)
  2009-12-22 12:12:29.977/12.348 Oracle Coherence GE 3.5.2/463  (thread=Cluster, member=n/a): Member 1 joined Service
  Management with senior member 1
  2009-12-22 12:12:29.977/12.348 Oracle Coherence GE 3.5.2/463  (thread=Cluster, member=n/a): Member 1 joined Service
  PartitionedPofCache with senior member 1
  2009-12-22 12:12:30.578/12.949 Oracle Coherence GE 3.5.2/463  (thread=Invocation:Management, member=2): Service Mana
  gement joined the cluster with senior service member 1
  SafeCluster: Name=cluster:0xD3FB
  
  Group{Address=224.3.5.2, Port=35463, TTL=4}
  
  MasterMemberSet
    (
    ThisMember=Member(Id=2, Timestamp=2009-12-22 12:12:29.541, Address=192.168.8.80:8089, MachineId=24656, Location=proces
  s:1188, Role=CoherenceConsole)
    OldestMember=Member(Id=1, Timestamp=2009-12-22 12:09:38.06, Address=192.168.8.80:8088, MachineId=24656, Location=proce
  ss:144, Role=CoherenceServer)
    ActualMemberSet=MemberSet(Size=2, BitSetCount=2
      Member(Id=1, Timestamp=2009-12-22 12:09:38.06, Address=192.168.8.80:8088, MachineId=24656, Location=process:144, Rol
  e=CoherenceServer)
      Member(Id=2, Timestamp=2009-12-22 12:12:29.541, Address=192.168.8.80:8089, MachineId=24656, Location=process:1188, R
  ole=CoherenceConsole)
      )
    RecycleMillis=120000
    RecycleSet=MemberSet(Size=0, BitSetCount=0
      )
    )
  
  Services
    (
    TcpRing{TcpSocketAccepter{State=STATE_OPEN, ServerSocket=192.168.8.80:8089}, Connections=[]}
    ClusterService{Name=Cluster, State=(SERVICE_STARTED, STATE_JOINED), Id=0, Version=3.5, OldestMemberId=1}
    InvocationService{Name=Management, State=(SERVICE_STARTED), Id=1, Version=3.1, OldestMemberId=1}
    )
  
  Map (?):
  
  2009-12-22 12:12:49.505/31.906 Oracle Coherence GE 3.5.2/463  (thread=main, member=2): Loaded cache configuration
  from "jar:file:/D:/coherence/lib/coherence.jar!/coherence-cache-config.xml"
  2009-12-22 12:12:51.358/33.729 Oracle Coherence GE 3.5.2/463  (thread=DistributedCache, member=2): Service Distribut
  edCache joined the cluster with senior service member 2
  
    
    example-distributed
    DistributedCache
    
      
        example-binary-backing-map
      
    
    true
  
  

  But when I try to store data cached from the client side, it reports the error message: it is staorage-disabled people. It shows that this console cache cannot store data in the server cache existing since then using different cache config files.

  Map (ca3): cache ca2
  
    
    example-distributed
    DistributedCache
    
      
        example-binary-backing-map
      
    
    true
  
  
  Map (ca2): put 1 one
  2009-12-22 14:00:04.999/6467.370 Oracle Coherence GE 3.5.2/463  (thread=main, member=2):
  java.lang.RuntimeException: Storage is not configured
          at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.onMissing
  Storage(DistributedCache.CDB:9)
          at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.ensureReq
  uestTarget(DistributedCache.CDB:34)
          at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.put(Distr
  ibutedCache.CDB:22)
          at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.put(Distr
  ibutedCache.CDB:1)
          at com.tangosol.util.ConverterCollections$ConverterMap.put(ConverterCollections.java:1541)
          at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ViewMap.put(Distrib
  utedCache.CDB:1)
          at com.tangosol.coherence.component.util.SafeNamedCache.put(SafeNamedCache.CDB:1)
          at com.tangosol.coherence.component.application.console.Coherence.processCommand(Coherence.CDB:581)
          at com.tangosol.coherence.component.application.console.Coherence.run(Coherence.CDB:39)
          at com.tangosol.coherence.component.application.console.Coherence.main(Coherence.CDB:3)
          at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
          at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
          at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
          at java.lang.reflect.Method.invoke(Method.java:597)
          at com.tangosol.net.CacheFactory.main(CacheFactory.java:1400)
  

• How I find myself with two passwords to iCloud for the same account?

  How I find myself with two passwords to iCloud for the same account?

  For security reasons, I only use iCloud for Contacts and "find my iPhone".

  Several months ago Apple forced me to change my password to iCloud.  So I did this.   In the last months, I used successfully the new password to 10 or 12 times when asked without problem.

  However, I received a notification of a software update for my Apple Watch. I did the update without problem. However, after completing the update my iPhone asked me to connect to my iCloud account. When I did this, she rejected my password. I made 4 attempts typing very slowly and with care for you sure I did it right.

  Then, operating under a hunch, I decided to enter my old password to iCloud. It worked?  I'm confused about this, any ideas would be appreciated.

  I had a similar problem last year. I had to call Apple. Contact is a bottom of this page.