Peuvent mini-Macs communicate-to-peer using bluetooth?

Similar Questions

• You can use old iMac as a monitor for mini Mac

  You can use 2008 iMac as a monitor for mini Mac?

  No, because the iMac of 2008 not display entered or supported to do so.

  See > use your iMac as a display with the target - Apple Support Display Mode

  You can use a connection network and something like ScreenRecycler

  See > https://www.screenrecycler.com/ScreenRecycler.html

  However, the best bet is to use a regular external monitor with the Mac Mini.

• Mini Mac 10.5.8 has been improved to 10.7, we have a lot of products older Apple if I buy the most recent delivered to nine Mini can I still use my iBook etc.

  My Mini Mac 10.5.8 has been upgraded to 10.7. We have a lot of Apple products. If I always buy a refurbished Mac Mini can I have limited access to my other computers laptops, iPhone, etc. I'll gather all the detailed information of the products Apple and posting here.

  Everything should be good. Just use the same identifier Apple you used on older devices.

  Note the following points:

  Upgrading to 10.7 and don't forget Rosetta!

  You can synchronize only with a computer. To move computers

  Synchronization to a 'New' computer or replacing a hard drive "crashed": Apple Support communities

  If all the media synchronized music and apps are already in the iTunes library of the new just backup on iTunes computer and restore from this backup.

  iOS: backup and restore your device iOS with iCloud or iTunes

• Can I connect my MacBook Air to my Mac Mini so that I can use the display of the Mac Mini?

  Hi all

  Can I connect my MacBook Air to my Mac Mini so that I can use the display of the Mac Mini?

  The Mac Mini is the end of 2014 with 2 ports thunderbolt model and is connected to a mini display port monitor.

  I'm just fed up of having to pull on the cable of the Mac Mini to connect the MacBook Air.

  Any ideas? Suggestions?

  Thanks in advance!

  Using the built-in screen sharing are an application like:

  ScreenRecycler

  Only some iMacs support the target Display Mode

  Use your iMac as a display with the target - Apple Support Display Mode

• I need help to use my gateway as a monitor for mini mac 2011 2012

  OT: installation.

  I need help to use my gateway as a monitor for mini mac 2011 2012

  You should ask the community of Apple Mac

  Community: Mini Mac | Apple support communities

  Apple Mini DisplayPort to VGA adapter. Use: Use the adapter Mini DisplayPort to VGA to connect your Mac to a standard analog monitor, projector, or LCD that uses a VGA Connector or a cable. Compatible with: MacBook Pro (retina, 13-inch, late 2012) and later versions. November 11, 2015
  On Apple and cables - video cards Support Apple

• Mini Mac instead of the Apple TV?

  Can connect you Mac mini to the TV and use a wireless keyboard to work as an Apple TV?

  Yes.

• Mini Mac - exchange of hard disks

  I have two mini Mac - the two 2012.

  Mac mini #1 is i7 2.6 GHz Quad Core - my first desktop computer

  Mac mini #2 is i3 2.3 GHz Dual Core - used as HTPC / Media Server

  #1 has (2) 1 TB disks, which I use a lot less than half (I also have external drives)

  #2 a (1) 512 MB internal drive, which is almost complete

  I plan to (1) move the 1 TB drives from #1 to #2 and move all data (mainly from the iTunes music ALAC and some iMovie video), that would solve the question of space. While they are open I consider also adding an SSD as the diskette of starting to #1, this would improve the startup time, run certain programs a little faster and a 256 MB or 512 MB disk would be inexpensive, that I would win a little more than space for data too. (to be honest, the Mac mini is jealous of the SSD in my MacBook)

  I've increased the RAM to #2, replace a switch of volume on a 3 g iPhone and replaced a screen on an iPad 2, so I'm not afraid of detail work - but only the RAM was easy. I also watched the videos on the replacement of a HD for this model on iFixIt. What is not clear is how much more difficult it is to make the first record as the second. If I move just a reader I wouldn't have to dig in the 1st Bay.

  So, my questions:

  (1) how can I say on the report system which drive is in the Bay, by whom I have which is on top, which is at the bottom? Or can I assume that the startup disk is always on top? (harder to do)

  (2) is the player in the upper Bay of much more difficult to replace?

  (3) I would also examine suggestions for a reliable SSD, but this isn't the substance of my question.

  Thanks for your help...

  Here's a video OWC on how to add a second drive to a Mac mini (same steps for 2011) 2012. I bought their data Doubler kit (and the extra ribbon cable) so that I would have the tools to get the job done right. Seen their detailed video while performing the surgery. I bought a 128 GB OCZ Vertex SSD (now a division of Toshiba and new product name VT180 series) for main and kept startup disk the Apple 512 GB of disk in place. The OCZ Vertex is fast and reliable for fall 2011.

• Mini Mac waking from sleep. A SOLUTION.

  I had the same problem that everyone has:

  Mini Mac won't sleep, requiring a shutdown and restart.

  I found the cause of my problem. This solution has been tested.

  Your system may differ from mine, but my solution can give you some ideas to try.

  My system: Mac mini (mid-2011), running Lion.

  On March 19, the eve of the day when the problem started, I sent a print job on my printer.

  The next morning (20 March) the problem started and happened again on 21 March.

  Exact symptoms seen: screen switch mode; However energy saving, the computer never goes sleep (front panel LED rest of suite, throughout the night, did not have his usual pattern of sleep slow breathing).

  In particular, the "system.log" file shows the usual "alarm maintenance" wake up every 2 hours. The newspapers just go quiet.

  Impression triggered the problem:

  My printer is a recent model Brother laser printer.

  Since March 19, I had been using Control-P to print documents;

  However, at no time I turn on the printer; my intention was to accumulate my impressions for several days,

  After that, I planned to turn on the printer and do my print and send all at once, for efficiency.

  It helped me: this solved my problem:

  March 21, I was wondering if something in the print queue prevented from sleeping.

  Experimentally, I opened app leader brother printing and deleted the print job in the queue,

  and BINGO, I instantly found the opportunity to sleep and wake my Mac mini.

  Other tests have shown that the problem is reproducible at will. :^)

  On 22 March, I tested the mini to ensure he sleeps and wakes.

  Then I sent a print job to the print queue, leaving the printer off and tried to sleep the computer.

  The problem comes back immediately: the display fell asleep but the computer does not.

  Then I connected ssh via LAN and issued:

  % lpq

  for the number of working the print job, then

  lprm % [jobnumber]

  to clear the print queue of the printer.

  This delete the print job, and the computer went to sleep immediately.

  Moral: They say devices can prevent sleep.

  Well, it shows that a device can prevent sleep without even be turned on!

  Tip: If you * must * stop your mini, first try to connect to the local network via ssh and issue the

  sudo shutdown - hour now

  for a stop more ordered by limiting the risk of data loss.

  PS. usually I can solve any problem of sleep if I ssh in from a different computer and question

  killall % ScreenSaverEngine

  but this does not work in this case.

  This object could be turned into a 'trick' - If you want to.

  Given that it is useful and not directed towards another user in a response.

  Thanks for sharing!

• Is there a delay in the signal when using Bluetooth on any iDevice and, in particular, on an iPad Pro?

  I am using Bluetooth involved in the use of music made a software with sounds of digital instruments using a musical keyboard hardware connected via the USB cable to Lightning to play sounds from the app on my iPad Pro.

  When I try to use a Bluetooth speaker source, there's a 1-2 second delay when I play a chord in the app and when the sound is played through the Bluetooth speaker.

  This delay IS NOT the case when I use just the iPad Pro speaker on when I am attaching some small travel speakers to the headphone jack of my iPad.

  Only when I try to use my Bluetooth speakers sounds better.

  I use a keyboard master Korg MicroKey Air uses the USB port play their own Korg music make its app module.

  Someone who makes music on an iPad with this problem at all?

  Is this a problem question Bluetooth and/or iOS?

  My iPad Pro isn't very strong using these apps do and travel speakers I use plugged into the headset jack music are a little better on the volume, but tend to deform when I try to increase the overall volume level.

  I intend to put this issue on the web forums for Korg, but want some answers from anyone who has been playing and recording music on their iPad using an external keyboard to play and record music in an app to do the music.

  Also, (and I intend to ask this in the GarageBand for iOS forums) can the iOS version of Garageband output sound on a Bluetooth speaker and quietly delay, too, that I can not get the iOS version of GarageBand to sound output via Bluetooth to a Bluetooth speaker.

  Hi, MichelPM

  According to the used speaker, he will always be * some * delay when using Bluetooth to stream audio from an iOS device (or practically any device BT also) through a Bluetooth speaker. I have a Bluetooth speakers system cheaper that I use with my iPad mini 4... I pretty much use it only to listen to sound. If I try and use it for Pinball iOS games I play, there is a delay of environ.5 second anywhere, I'm the speaker. Exactly same phenomenon occurs with the keyclicks when you type it on the iPad keyboard... 5 second delay & even with some applications of synthesizer iOS that I use (Animoog & Arturia iSEM). I think it's just the nature of the beast of Bluetooth.

  Higher quality speakers would be better, but I'm not spending more money to find out.

  If you want an immediate response with zero real audio keypress delay, I fear, the only way to do this is to use a wired speaker.

• Speed of sata for 2012 mini mac link only 3A negotiated Gigabit?

  I just bought a 2012 mini mac, processor i5 2.5 GHz opportunity. It seems that everything is delivered as originally, the hard drive is HTS545050A7E362 (5400 RPM). I think that it initially comes with Mountain Lion, but now the OS is 10.9.5 Mavericks. I plan to hand 10.8 Cougar on it soon.

  It seems to take so long to start as my mac mini 2010. I made a backup and he seemed to be very slow. It was a few days ago. Today, using 'about this Mac' and looking at the Express SATA/SATA, it shows Intel Series 7 Chipset, connection speed: 6 Gigabit, negotiated speed: 3 Gigabit.

  Should it? If that's all that the current drive can do, which will motivate me to get an SSD. I intend to change the OS anyway, I'll do this first and see if a difference. I tried searching for this info online and cannot find published specifications, and there are some problems like this, but with models much earlier with different circuits firmware. Maybe I'll try start several times with the command-V, even if I think I'm going to need a camera high speed to capture the output. Is it possible to display the default info not requiring only the command-V?

  6.0 is supported. The drive may be 3.0.

• Old mini mac as a media server?

  I have a MacMini 2.1 Intel Core 2 Duo, 1.83Ghx, 2 GB RAM Mac Mini that has only a DVI video port.  Currently, the mini does nothing and I would like to unload my primary iMac iTunes account and share the mini for different computers in the House and the current 1 (soon add another) Apple TV.  99% of my media is in iTunes.  I have a 2 GB external spare hard drive I can use on the MacMini for storage.

  A colleague suggested I use the mini as a server multimedia and mentioned 3 applications/tools - Synology Nas free and Plex.  I would like to hear suggestions on how best to continue this Mac Mini as a media server using an external drive.  Is the fastest way to transfer just my iTunes library current of my primary iMac on the external drive on the MacMini?  Currently, my main iMac is where I manage my iTunes account, synchronize devices, purchase new media, etc.  I'm afraid that if I have the unloading to the Mini, how can I manage my current workflow?

  Plex would be a good option

  Synology is a brand of SIN do not know if their flavor of linux might work on a mac mini

  I have one and use it with plex too

  also have plex on my iPad, iPhone, OS X, windows 10

• Mini Mac does not connect to restore the iPad 2

  I work in a public library, and we have several iPad 2s who lend us out for our guests to use. Between each user, restore us the iPad to factory default with a mac mini, then reinstall our applications from the iTunes backup. Since we have upgraded to iOS 9.2 a month ago, we had trouble getting the restore process of working part. When we try, we get this error message: "there was a problem downloading the software for the iPad. The requested resource is not found. »

  The mini connects to iTunes and can surf the web without any problem, we do not have any anti-virus installed on it, and we tried to connect via our LAN and WiFi. We have the latest version of iTunes and the latest iOS on the mini. We rebooted the mini many times. I checked the file hosts, in accordance with the instructions from apple, and apparently is not the issue. I am able to restore the iPad on a Windows PC and then move them to the mini to apply the settings of our saved backup, so I think the problem is with the mini itself, although it now occupies about 3 times more time to reinstall the applications as before.

  We've been ready ipads in recent years without any major problems and have made no changes to the default settings of the mini otherwise to update the iOS. Restore the iPad is the only thing we use the mini for. I would appreciate any advice.

  What OSX version and what version of iTunes?

  You say Mac mini Mac OS X (10.7.5)

  The last OSX is 10.11.2 and iOS 9.2 requires at least 10.8.5 to get the required iTunes version

• Mini Mac 2013 and flag 23bw

  I need to find where to download the software (using a monitor of 23bw Pavilion on a mac mini

  Here are the specifications of your HP Pavilion 23bw 23 inch diagonal IPS LED backlight screen. Here is the page of diagonal pilots to monitor IPS LED backlit HP Pavilion 23bw 23 inch for your monitor. There is no drivers Mac or OSX on this page. In theory, you just connect the Mac Mini to the HP 23bw using a suitable cable or adapter, and it should work. Please see Apple Support Forum - can I use a monitor HP with a Mac mini? for confirmation of this.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• Can not listen using bluetooth headphones with music Apple after updating iOS 10

  I've updated my iPad to iOS 10 Air yesterday. This morning, I plugged my bluetooth headset and tried the Apple music (specifically, the NPR radio station). It sends output to the speakers of the iPad and not the bluetooth headset, and after several attempts does not connect to the bluetooth headset. I checked the bluetooth connection and verified that I could hear Siri through headphones. But Apple music seems not to want to use bluetooth headphones, whatever it is I'm looking for.

  Any suggestions or help would be greatly appreciated.

  Hi the edema,

  It is my understanding that you are experiencing some problems with Apple's music stations on your iPad don't play no not by your Air Bluetooth headset. I listen to music Apple all the time and I know it's nice to be able to listen to the radio stations with headphones. I will do my best to help you.

  As you have noted that you can hear Siri through Bluetooth speakers, you can also try a different like YouTube app to see if you can hear the audio from there through your headphones? In addition, if you do not already made, conclusion of the music app and reopen it and try to play the station again. This happens just this specific station or any station you are listening to?

  Even if you did the following steps part of this article, to get help to connect a Bluetooth accessory with your iPhone, iPad or iPod touch device, there are a couple of additional ones that can help.

  1. Make sure that your device iOS and Bluetooth Accessory are close together.
  2. Make sure your Bluetooth accessory is on and fully charged or connected to power. If it uses batteries, test them to see if they need to be replaced.
  3. Restart your Bluetooth accessory.
  4. Make sure you have the latest version of iOS on your iPhone, iPad or iPod touch.
  5. On your iOS device, go to settings > Bluetooth and make sure Bluetooth is on. If you cannot turn on Bluetooth or you see a spinning gear, restart your iPhone, iPad or iPod touch.
  6. Cancel pairing the Bluetooth accessory, replace the accessory in discovery mode, then the pair and plug it in again.

  Thanks for stopping by Apple Support communities. See you soon.

• Crush the display flashes for 2-3 minutes after that mini mac wakes up from sleep

  Crush the display flashes for 2-3 minutes after that mini mac wakes up from sleep

  If you have another Thunderbolt cable, plug it into the unused port on the

  Thunderbolt Display and then in the Mini and see if the same thing happens.

  What you can see is a precursor of the poster, built out of the cable.

  At least, it could eliminate a costly repair problem.  Although the cable itself is not

  expensive, opening to the top of the screen of TB to replace could be.

  Well that not connected on a Mini, I began to see in similar behavior my

  iMac, so that there was finally a break in the complete cable.