Phoenix BIOS crashes, cannot run BIOS

Similar Questions

• HP Pavilion a6000n Phoenix Bios

  My 03/2007 Phoenix Bios is corrupted.

  My computer model: a600

  Product: rx885aa

  Manufacturer: ASUS

  name of the motherboard: M2N68 - LA

  Name card mother HP: narrated - GL8E

  Chip set: GeForce 6150SE apply 430

  Operating system: Windows Vista

  I asked the website of HP support for a download of the Phoenix bios, but wasn't able to find a download link.  Anyone know how I can get the Phoenix bios and provide a link for download.   Or is there a way someone can provide me with the bios, if they have it?  I need to Flash my bios with the original Phoenix bios with purchase of HP Pavilion a6000n desktop.  Any help will be greatly appreciated.

  The bios updated to the a6000n HP is available since 09/2007.  Since then, there must be dozens of people who made the update to the bios and have fried their PC. You'd think with so many people having problems, HP fired the update of the bios on his website... or at least to give some sort of warning.  I can see why HP has let the update of the bios in place however.  Those who have made the update and fried their PC still needs access to the exe file posted to extract the ROM to Flash their bios corrupt 513...

  In the interest of those who have the misfortune to do the update of the bios and the frying of their PC, take heart that their PC can be fixed.  I won't be able to make myself the fix until I have access to another PC.  But I'm pretty confident that the fix will work, because it has worked for others with the same HP computer.  The solution to the problem can be found in the material category of this forum under the thread "HP #a6000n bios checksum error after update bios.  It's a pain in buttocks for manually flashing bios corrupted, but it will be well worth the effort to get your PC up and running again.

  Just shame on HP for show lack of interest to its customers.

• How to acess, Skype profile to set parameters when crash anotification come tell me that the error cannot run

  original title: Skype

  How to acess, Skype profile to set parameters when crash anotification come tell me that the error cannot run

  Hello

  The question you posted is more appropriate for support help forums Skype. I suggest you send the same on the following link for assistance:

  https://support.Skype.com/

  I hope this helps.

• Windows cannot run disk checking on this volume, because it is write protected.

  I can't get the start menu appears in safe mode then I have botted on a cd with the command prompt and when I type chkdsk/r, so, it gives me "windows cannot run disk checkingo n this volume because it is write protected."  Can someone tell me what I can do to fix this?

  If you encounter a problem that you need help, follow these steps:

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  What you see you don't think you need to see?

  What do not you think that you should see?

  Fill in the blank: my system worked well until: _.

  If you just want to start by running chkdsk /r on your hard drive (a good idea), I would follow the instructions below:

  Use the XP Recovery Console to check the file system on your HARD drive and fix all the problems.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the command prompt.

  Start by checking the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Why my iMac (27 inch, mid 2011) cannot run Windows 10 in boot camp? And if he can't, he would work in something like parallels?

  Why my iMac (27 inch, mid 2011) cannot run Windows 10 in boot camp? And if he can't, he would work in something like parallels?

  To be honest, Windows 10 is compatible with your Mac, but Apple does not release from Windows 10 drivers for it. There are various guides on the Internet to install the drivers for Boot Camp Windows 10 even if your Mac is not supported, but follow them at your own risk (don't forget that you won't receive help to make).

  However, you are free to run Windows 10 on a virtual machine. To do this, you can use Parallels, VMware or VirtualBox, but remember that a virtual machine will give you less performance than Windows natively on your iMac. Read-> Windows in BootCamp or Virtual Machine?

• Cannot run Windows 7 SP1 on big HDD (1 TB)

  Hello

  I just realized about this very recent which is apparently now closed:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=275105

  I had same problem with a Toshiba 1 TB drive - I lost on that day and tried at least 10 Windows 7 installs with various behaviours/settings/partitions and still the same result. Cannot run Windows Update.

  I also tried to install Windows 7 SP1 from a DVD and have failed with a catastrophic mistake. I also tried to reformat the disk, the WIndows repair tool (ha!) update and installation when you're standing on my head while reciting the works of Shakespear.

  I gave up in the end and decided to NOT use it as a system disk at all. Instead, I installed Windows 7 on a smaller drive and uses the 1 TB and successfully as a secondary on the same PC drive with a single partition of 1 TB.

  I'm likely to have problems - maybe when the player is more complete and if I might be wise to split into 2 or more partitions?

  I just bought the drive so I can send it if it's going to be a waste of time.

  Thank you very much.

  And what model of Toshiba laptop do you have?

• Re: Cannot run programms that requires OpenGL using the Satellite L

  I have a Toshiba laptop with ATI Radeon 4650, but cannot run programms that requires OpenGL.
  I can't install the new ATI driver on their homepage, because they are not compatible with the Toshibaproducts.

  I also can't update the driver from Toshiba, because their driver ATI latest is since March 2009.
  I already have googeld problem, but can't find it.

  Please guys, someone knows a solution to this annoying problem?

  > I can't install the new ATI driver on their homepage, because they are not compatible with the Toshibaproducts.

  Because ati - driver must be changed to support, protection against overheating.

  > I also can't update the driver from Toshiba, because their driver ATI latest is since March 2009.

  Yes, it may take quite a long time when Toshiba released updated Gpu driver

• "No valid source or target channels specified. Cannot run. "error when you try to convert to digital channel waveform

  I'm trying to convert a waveform channel in one digital channel and a channel of absolute time, but I get the "no valid source or target channels specified. Error cannot run. ».

  I'm trying to concatenate several files TDMS InsightCM so I can display the data in a continuous flow over time. If the first file loaded (one of the channels in the group "Signals") convert the same channel, it works fine, but when I try to do the same thing with any of the channels from the second file (one of the channels in the group "Waveforms1"), I get the error.

  

  Hi JEBalles,

  I was able to reproduce this behavior when I chose a digital channel as my channels to convert. In this case, it looks like you run the operation on the speed profile > Mod1-Ch0 A NL, which is a digital channel.

  Could you try to select a waveform another channel? It looks like [3] Mod1-Ch0 A NL is a waveform channel.

  Kind regards

• Generation of LabVIEW Code Fix cannot run

  I'm using LabVIEW 2011. I try to use DAQmx support for generating a pulse of my USB-6259 signal. LabVIEW jumped out an error message 'Generation of LabVIEW Code cannot run.

  I try to reinstall LabVIEW 2011, but the error is still there. Help, please

  Problem went after DAQmx and LabViEW re - install.

  Thank you

• Cannot run Windows Update from the PC that was previously on a domain.

  Original title: cannot run Windows Update

  I got my PC of my former company with a local login. However, the PC has been joined to a domain. The company no longer exists, but because the PC has submitted to its group policies, I can't run Windows Update. Is there a way around this problem? Thank you.

  Strongly suggest that you contact the administrator of the domain so that it can correct or remove strategies group that are applied to the system.

  In addition, ask the installatiion Media for the edition of Windows installed if you don't have it now.

  MowGreen Services update - consumer safety

• After the upgrade to windows 7, Warcraft3, Battlefield Viet Nam cannot run in 4:3 screen but 16:9

  After the upgrade to windows 7, Warcraft3, Battlefield Viet Nam cannot run in 4:3 screen but 16:9... my East of 1366 X 768, so the games are run with black screen on the left and right sides... What can I do? He has run well in Vista =]

  1366 x 768 is the strangest resolution that I've ever heard of. Your video card drivers helped "keep the proportions" and decided to not to stretch imagine because I assume that you can't choose this exact resolution in the game. If your monitor has an overdrive video or image format option, you can enable or disable that or if you have a NVidia card, you can change the picture format option in the properties of the video card.

  If you have an ATI card, then you're stuck with a proportional image: P
  

• CANNOT RUN FILE__CODEPROCESS FAILED; CODE 14001

  I try to install some programs, such as CamStudio, and this error pops up.

  "Cannot run the file:

  C:\Program Files\CamStudio2.6b\Recorder.exe

  CreateProcess failed; code 14001.

  This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem. »

  I did, and it solves nothing. How can I stop this error and install the program correctly?

  Let's turn off all those, reboot, try download and install again and see what happens.  If it works you enavle all the elements mentioned above.

  In addition, if you do not use Internet Explorer, then do it for these downloads.

  --
  Gina Whipp
  Microsoft MVP (access)

  Please post all responses on the forum where everyone can enjoy.

• Cannot run Microsoft Office on my computer because demand for product key.

  Original title: product key.

  Cannot run Microsoft Office on my computer because request product key... Where to find the product key on my computer?

  MicrosoftOffice should have a key with it when you bought it.  You need a special touch as the windows xp key

• Cannot run my installation of Win Xp Pro Cd

  Cannot run Setup from the cd that ORIGINALLY installed win xp pro on my machine because it says that the version on my computer is newer than the Conference on disarmament, well well the only reason I can think of, is that the updates have made the more recent than the original pc version can someone help,

  QUESTION; How to run the Setup program when I get this message please.

  In order to run the Setup program to reinstall windows, put the disc into your computer and start to it, which will give the classical configuration of BACK blue screen and after you format your drive, and windows installs the first part, you will need to return to the mode of windows.

• We see disable my working group in the properties of my computer, we cannot run network in my office

  We see disable my working group in the properties of my computer, we cannot run network in my office

  Some things that can cause this:

  1. you are not logged in as administrator.

  2 - the Client for Microsoft Network is not installed Properties Control Panel/Network Connections/Local Area Network)

  3 - the workstation service is not running.

  John