Phone always to "research".

My phone "seeks" for some time, and connects to a network. I tried the simple fixes. Thought I'd try here before going to the store. I can't receive calls or texts.

Hello

Try to use your phone to another location, check because the problem is resolved.

Try to use another sim card and check.

If not resolved, try a hard reset by pressing the button on/standby with "home" button until the apple logo appears. Hope it solves

Tags: iPhone

Similar Questions

  • My phone always freezes up after recovery disks

    Hi, I do not know if this is the right place to seek help so if someone could say the appropriate instance id recognition :) m

    My problem is that 3 weeks ago, my laptop started crashing and freezing after exactly 10-20 seconds of starting, I used safe mode and it works fine. So I restored to a point, but which never helped either, it froze again 20 seconds startup.

    I decided to use the recovery discs, after I did it, it worked fine for a day, but then started crashing again and then gave me the blue screen that I couldn't read it because it went and turned off, I got it once more and now it seems to work, but I see signs of him to start playing again towards the top.

    I don't know that what is the problem with her or what to try to fix it, I thought that full recovery to factory settings fixed everything? My warranty expires in December, while Toshiba will do to my laptop if I send it to be repaired? What can do more: S if it is completely messed up, Toshiba would send a new?
    I m do not know how to find out my laptop computer info? :)

    Each laptop sticker was on the low side with important information. There you can find the model number, model name and serial number.
    It will be interesting to know what model of laptop you have exactly.

    Back to your problem: in your ad, it's very kind describes what is happening with your laptop, but it is certainly not possible to provide the exact diagnosis. I can see portable settings with factory works well, but later you will notice these symptoms of freezing. Maybe you have a favorite application and this application is responsible for this behavior. Who knows?

    You can contact Toshiba and they will install new OS using recovery image and test the feature but you have already done this. They have also a few special tools to check the operation of the equipment. If there is a problem with the hardware of the laptop will be repaired. You will not get a new. It will be repaired. Please do it if the warranty is still valid. Later, you must pay for the laptop repair.

  • BlackBerry Smartphones how can I get my phone ALWAYS store map.

    I chose manually my pictures to be stored on the card, but for some reason it keeps any return to the unit.  I can't find this until I went to take a picture and I get an error message indicating that the photo cannot be stored, because there is no more memory.  At this point, I must go to the menu options and select "media card" AGAIN.  Any thoughts?

    Do not forget to punch and grab some popcorn!

  • My phone always freezes when I use Skype or watching videos online, why is this?

    When every I'm on a Skype call or watching videos online, my computer hangs for 2 minutes, but he continues as long as im watching a video or using Skype... Help, please.

    Hello

    Thank you for contacting Microsoft Community.
    To update the display drivers and check. If no update is available, uninstall the drivers (as well as the software, if installed), restart the PC, install the drivers (with the software, if applicable), again to restart the PC and check if the problem persists.
    If this is the case, reply here.
  • 7841 SIP Phone - Background Image

    Can I get a positive confirmation that the SIP 7841 landline does not support custom background images?  I've seen on google images that seem to show a 78xx research phone with a screen saver snoopy or similar image and this lead me to believe that this phone could have a custom background or a picture of timeout/screensaver.

    No information to confirm if this fixed phone supports custom background images would be appreciated.

    Thank you

    The administrative guide for the phone always have this information:

    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/7811-7821-7841-7861/10-1/english/adminguide/PA2D_BK_7479E876_00_7811-7821-7841-7861-ag-cucm-1031/PA2D_BK_7479E876_00_7811-7821-7841-7861-ag-cucm-1031_chapter_01001.html

  • every time I erase content and settings on my iphone 6 after reset at the start of my phone and after crossing the screen as Hello > select language > Connect wifi > my iphone doesnot ask me activation lock even if my unit is also found on

    every time I erase content and settings on my iphone 6 after reset at the start of my phone and after crossing the screen as Hello > select language > wifi connection > my iphone doesnot ask me lock activation that says that your iphone is connected with the old apple ID, please enter the id and password

    I always reset on find my optional equipment please tell me how to activate locking activation so that whenever I have factory reset my phone with finding my camera so my phone always ask an old apple and password

    I do not understand your question, but let me go with what I believe. Looks like you entered in iCloud and erased all the content and settings on the iPhone, and once you go by assigning back up again, you do not see something that you expect to see, for example, a request for an Apple ID. When you go through the installation process to select the language, etc., it must, at some point, ask you to identify yourself with your Apple ID. are you not see this?

    It would be better if you try to describe exactly what you do again. Also, without the help of any sign of punctuation, it is difficult to track everything you ask. Try providing the steps of what you do, and then what you see when you get to the point that you believe that something is going wrong. You mention both an old and new Apple ID, which is rather confusing.

  • iPhone says research & service no.

    Please help my phone is supposedly research or no service upper-left. What can I do to fix it or get it fixed?

    Howdy there Jessycat79,

    Looks like you are unable to connect to your cellular provider at all on your phone. Here is an article on the resolution of this exact kind of the question I think you will lead to a resolution:

    If you cannot connect to a cellular network or cellular data

    1. Check your coverage area to ensure that you are in an area with a cellular network coverage.
      • If you cannot connect to a cellular network on your iPhone, make sure that the cell data is on in settings > cellular*. On your iPad, go to settings > cellular data.
      • If you travel internationally, make sure that your device is set up for data roaming. Go to settings > cellular > data roaming.
    2. Restart your iPhone or iPad.
    3. Looking for a carrier settings update.
    4. Remove the SIM card and put it again. If the SIM card is damaged, or does not fit in the drawer of the SIM card, contact your carrier.
    5. Reset your network settings. Tap Settings > general > reset > reset network settings. This also resets the Wi - Fi networks and passwords, cell parameters and VPN and APN settings you used before.
    6. If you have another device, see if you can connect your business with her network to this place.
    7. Contact your operator for:
      • Make sure your account is active and in good and due form.
      • Make sure that there are no failures in your area.
      • Verify that your device is not blocked to receive cellular services and is set up with the right data plan.
    8. Update your iPhone or iPad to the latest version of iOS.

    If you still cannot connect to a cellular network and have confirmed with your carrier is not a problem with your account, or your network, try to restore your device.

    Thank you for using communities of Apple Support, all the best!

  • If I disable iCloud photo library, my photos always get included in my General iPhone backups?

    I don't want to use iCloud photo library at all so I turned it off.

    The photos that I now keep stored locally on my phone always get included in backups of General phone? Or they are excluded?

    Thank you

    D

    They are included when iCloud library is off and excluded when the iCloud library is turned on.  You can see the option to include or exclude in the settings manually > iCloud > storage > Manage Store > iPhone > look down.

  • My dear friends, I have Acer s2oo smart phone. I have a big problem with it

    My dear friens, I have an Acer s 200 smartphone. I used it for many years. but now I have a big problem with it. Dears when I turn it on it is the acer logo appears on the screen, but then it keeps this process. I mean after 5 or 6 hours, when I look at my phone always logo Asher on the screen never turn off or work. then I have it connected to my computer in order to re program the windows installation, but my computer does not connect to it. My dear please help me

    How can I get it back. What kind of program will help connect my computer. If such a program exists please could you give me the link of it for download. Please help me. Take care.

    Wow this is a very old smartphone

    I suggest you take a look at this forum to find some tools useful/rom:

    http://Forum.xda-developers.com/Acer-F1

    Here you can find some ROMs to use to try to repair your S200:

    FTP://FTP.Acer-euro.com/Smartphone/S200/os_images/

  • Memory micro SD card works on phone, but not on the computer, Please HELP!

    Help, please

    History
    (1) I got a 8 GB Micro SD memory card, it worked fine for two years and then became corrupted, I formatted and it worked fine for about two months before, she has become corrupt again
    (2) this time when it became corrupt my phone always accepted, but the computer could not detect, weird, I decided to not format and continue to use on my phone
    (3) I decided to buy a new memory card and an adapter and then transfer the stuff over the old to the new, but I was shocked when the NEW memory card and a NEW adapter did not work and continued to say needs formatting, hmmm...
    (4) I decided to format it, but it says that it cannot be formatted... WHAT!
    (5) I put the new card in my phone, it works and I have format it on my phone instead... IT STILL DOES not work! Help me!!!

    I still think you should get a new card reader.  The adapters are not likely to be the problem.  On the other hand, I had a player go bad and yet still be "recognized" by the computer.

    It is possible, but probably not - IMO that reinstall the driver (if available; in general, however, these devices use drivers that come built-in to Windows) or a firmware update (if available for your drive in particular) could solve the problem.  What is the brand and model of your card reader?

    At the very least, you should see if you can find someone with a SDHC card reader and then see if you can read and format the card using your cards.

  • Always asking to enter a PIN after reboot?

    When I was installing an access fingerprint for my XZ (with PIN code as an alternative access method), the phone explicitly asked if I need to enter a PIN after every restart. I said 'NO '.

    However, after each reboot the phone always forces me to enter a PIN, which means that the phone simply ignores the choice I made when I was installing a fingerprint access.

    I tried to reset settings of fingerprints fingerprints and re-setup it from scratch, each time explicitly declare that I don't want to require a PIN after reboot. However, the behavior is always the same: the phone still requires a PIN after reboot.

    So, what happens here? Is this a bug in the firmware? Or is there a way to make it work?

    OK, now I see I misundertood the purpose of this function. Thank you all for putting me on the right track.

    I see that the option which asks me if I want to enter the PIN after reboot refers to a completely different behavior. If I say 'Yes', it will ask me to enter a PIN at the beginning, before even Android starts. (It shows a naked white screen with a PIN code entry field).

    If I answer "No", it will start Android without asking me to enter a PIN. But later, when it gets to the lock screen, it will ask you to enter a PIN in any case.

    In other words, the phone always asks a PIN code. The option 'request to enter a PIN after reboot' simply controls when it happens: early (before Android starts) or late (to the lock screen).

  • Adding contacts on the phone

    Hello world

    in my application I want to save the contacts to the phone, this part works perfectly.

    My problem is when I add contacts to the phone, for example research in the forum I found this link: http://supportforums.blackberry.com/t5/Java-Development/Problem-adding-contact-to-phone/m-p/341728/h...

    There, I found this code:

    try
    {
          ContactList contacts = null;
          try {
             contacts = (ContactList) PIM.getInstance().openPIMList(PIM.CONTACT_LIST, PIM.READ_WRITE);
          } catch (PIMException e) {
             // An error occurred
             return;
          }
          Contact contact = contacts.createContact();
    
         String[] name = new String[ contacts.stringArraySize( Contact.NAME ) ];
         name[Contact.NAME_GIVEN] = "Kate";
         name[Contact.NAME_FAMILY] = "Turner";
         contact.addStringArray(Contact.NAME, Contact.ATTR_NONE, name);
    
         AddressBookArguments entry = new AddressBookArguments(AddressBookArguments.ARG_COMPOSE to AddressBookArguments.ARG_NEW, contact);
    
         Invoke.invokeApplication(Invoke.APP_TYPE_ADDRESSBOOK, entry);
    
    }
    catch (Exception e)
    {
        System.out.println("erreur ms avt ps disp addContactToRep " + e.getMessage());
        e.printStackTrace();
    }
    

    with this code, I can add a contact... but one by one and the user to save this contact.

    How can I add all the contacts I need automatically?

    PS: Sorry for my English.

    I found the answer here:

    http://supportforums.BlackBerry.com/T5/Java-development/saving-a-contact-in-adress-book/m-p/147727#M...

  • App for Android phone printing

    I have a phone android-Samsung Galaxy SII - I - I need a phone app to print from my phone on my printer-e which is a HP Photosmart premium AIO C410 3-print set.  How to print from my phone

    founf it!  Go to the app market on your Android phone and the research on HP ePrint home & Biz - download and print

  • BlackBerry Smartphones the speaker is always on when answereing telphone calls since the upgrade to 4.5.0.55

    Hello

    I recently updated a number of our phones blackberry 8100 company for the latest OS 4.5.0.55 platform 2.7.0.68)

    When a call is received, and I answer with the green button the phone always goes into speakerphone mode. I have to move the phone to the ear and press the OP button to turn off the speaker for the call.

    It is confusing with the appellant because they're not sure of what is happening during the few seconds of quite while I turn off the phone mode talk.

    I've updated a number of phones and all other seem to answer calls in fashion phone speaker not as expected.

    I looked in the menu options to find an arrangement.

    Thanks in advance for any help...  If no solution is found, I might have to reflash old firmware and then reflash firmware again.

    With the phone, remove the battery and then replace it... which has toured on mine when it had the same problem

  • Problem with my Treo Windows Mobile 6.1 800w (Sprint) always connect to internet via Power Vision data services?

    I don't know if it's a good 'problem' or not (I don't see anything during my brief search), but Im wondering if anyone else has the same problems.

    I really like this phone compared to my previous 755 p, but I have two gripes in this regard.  First of all, there is no light that flashes when an alert or notification has taken place, or a call came, etc., as had the 755 p.  Why would this feature removed?  If the screen of the phone is off and vibrate (like how my phone is at work), you'd never know unless you have checked the phone or had put on alert constantly rehearsing and vibrate my office all day.  I can live with, I guess, but an update or application that could resolve this would be great.

    The real problem I have is with the phone always tries to connect to Sprint Power Vision Data services via #777 to synchronize my email accounts.  I have all the e-mail settings (Outlook and Gmail Pop) to manually check for new messages, and the UNCHECKED check box to enable the internet connection.  But every few minutes, or if a message appears asking to connect to the internet even if everything is set to manual.  It is so ANNOYING so now I just put it to stay connected.  The real problem is that it seems to be to kill the battery even more fast because its connected throughout the day.  Im trying to minimize consumption to save the battery life (turn down the backlight, disabled WiFi, screen turn off immediately when done using the TI, etc.), but I'm close to the point to get rid of the phone if I can't understand it.  Its a new phone and battery (Christmas gift) and I think that the battery should last more than a full day even with the light for no use.  I don't use the phone that much but it honestly be dead from 22:00 with only plain text messages and phone will use during the day.  I have probably of less than 200 minutes per month.

    I contacted the Palm support and worked with someone for a while, and it doesn't seem to be sure if it was supposed to be like that or if there was a problem.  In the end we left it as it was and he said I need to contact Sprint to see if they have something in their automatic configuration that makes the phone connect ALL THE TIME.  I still have to communicate with them, and I'd like to hear what others have to say.

    Don't make me get an iPhone lol.

    Thank you

    Ryan

    Well, I guess I figured out how to stop it from asking me to connect to the internet EVDO service every few minutes.

    It seems he was trying to do because of my two Pop email accounts I have set up.   On the enamel of the Options screen, it lists the e-mail accounts and there is an asterisk next to one of them.  If I leave the asterisk next to "Outlook E-mail" then it seems not repeatedly, try to connect to internet EVDO.  If I leave the asterisk next to one of Pop email accounts, he seems to want to connect to EVDO repeatedly.  I guess that the asterisk indicates the default or the main e-mail account of something, then he tried to update via internet services.  I guess that Outlook is configured to only update when a synchronization is performed, or something.  so if I browse the web with IE, I just manually disconnect after the browsing session and it is more requested to connect to EVDO when the asterisk is next to "Outlook email" in the list of accounts on the Options screen.

    Note, with some other applications and tweaks installed that I found on the forums, my battery life is now acceptable even with normal use.  still has 30% left before going to bed each night.

    Message is about: Treo 800w (Sprint)

Maybe you are looking for

  • loss of functionality since the last update

    Since the last update of Mozilla a few days ago (Mac) I noticed at least 2 items that I used to use regularly lost features: 1. used to be able to rearrange bookmarks by drag-and - drop (bookmarks-> show all bookmarks). Is no longer able to rearrange

  • How to read digital signals with pre-and post-trigger on a card PCI-6251

    I have 22-bit parallel position of data entering TTL lines to 16 kHz with a pulse of marker that says when the data is valid. I also have a fault line which gives an impulse when an error condition is met. I want to read in the 22 lines of position w

  • 15 G013SW

    Hello... I recently bought a hp 15 - G013SW (free dos) and I cannot find drivers for win7 help please... Thanks in advance.

  • Problem with the Acer, c/o Windows 7 laptop installed with the loading games

    I'm having a problem with Windows 7 which is preinstalled on a laptop Acer Aspire. Unless the laptop is on battery to 100% or pluged, games does not load upward. Because it is preinstalled serial numbers are not match so I can't get help from M/S.  A

  • All-in-one HP Officejet 5610: problem of scanning HP 5610 iMac OSX Yosemite

    HP Officejet 5610 all-in-one iMac with OSX Yosemite 10.10.1 Before the installation of Yosemite, the scan worked. Now, when I try this happens. ERROR Cannot perform the analysis because another program has control of the HP imaging device. Try the fo