Phone disabled
How to reset a phone off without reset
If the device is disabled, you must erase and restore it. If you have a backup, you can restore the backup. If you do not, you will need to restore it as a new device:
Good luck
GB
Tags: iPhone
Similar Questions
-
I have phone disabled after the wrong password what can I do?
MY I phone turns off due to the bad password of my baby
What can I do?
Click here and follow the instructions.
(141750)
-
Pavilion g6: phone disabled
Entered password 3 times now says system disabled with this number. 75966711 what I do
Enter 60644337
Kind regards
DP - K
-
I have iPhone 5 s and app off phone in softword iOS7.1 update to 9.2!
What should I do?
I have iPhone 5 s and application phone disabled after softword updated iOS7.1 9.2!
I can't dial & call now.
First try a reboot of the force:
Hold the sleep/wake and "home" button until the Apple logo appears. -AJ
-
License AnyConnect disables AnyConnect essentials
Is this correct? It does not seem right. I bought a mobile Anyconnect license to add to my ASA 5505, who already had active Anyconnect Essentials.
I received the watch activation key that I would go to:
License : Base Max Physical Interfaces : 8 VLANs : 3, DMZ Restricted Dual ISPs : Disabled Trunk Ports : 0 Failover : Disabled Inside Hosts : 50 VPN DES Encryption : Enabled VPN 3DES and AES Encryption : Enabled VPN Peers : 10 SSL VPN Peers : 2 Shared SSL VPN licensing : Disabled AnyConnect Mobile : Disabled Linksys VPN Phone : Disabled AnyConnect Essentials : Enabled Advanced Endpoint Assessment : Disabled UC Proxy Sessions : 2 UC Phone Proxy Sessions : 2 Botnet Traffic Filter : Disabled
TO:
Inside Hosts : 50 Failover : Disabled Encryption-DES : Enabled Encryption-3DES-AES : Enabled Security Contexts : Default GTP/GPRS : Disabled AnyConnect Premium Peers : Default Other VPN Peers : Default Advanced Endpoint Assessment : Disabled AnyConnect for Mobile : Enabled AnyConnect for Cisco VPN Phone : Disabled Shared AnyConnect Premium License server : Disabled Shared License : Disabled UC Phone Proxy Sessions : Default Total UC Proxy Sessions : Default AnyConnect Essentials : Disabled Botnet Traffic Filter : Disabled Intercompany Media Engine : Disabled Cluster License : Disabled vCPUs : 0
The Mobile license should not disable Essentials. That could be a mistake made by the license server.
I recommend to open a TAC case and urging them to please put in the queue for license Global (GLO) operations. Request GLO re - issue an activation key which includes your already approved essentials.
-
BlackBerry Desktop Manager Smartphones will not read phone
the Director of bureau will not read my phone... it connects fine - starts playback-, then freezes. He can even do the initial configuration. I don't get an error message.
I reinstalled the software tried different versions - exchanged phones - disabled the antivirus/firewall and nothing has solved the problem. I can't find any documentation on this site or tmobile who is somehow useful.
advice would be greatly appreciated.
Thank you!
Hello
On the departure of Blackberry browser, the key options, menu, browser cache, delete all categories.
Director of office on the PC, then create a battery pull on the Blackberry just before you
Connect the USB cable.
Let us know how it goes.
Thank you
Bifocals
-
AnyConnect VPN Mobile disabled 5505 SEC no more questions
Hi all
I have a 5505-SEC-BUN-K9, must purchase a license of Mobile Anyconnect vpn.
For the question now, I was able to active the anyconnect for mobile but the sec as well as features all failed. How can I check the question?
The devices allowed for this platform:The maximum physical Interfaces: 8 perpetualVLAN: 20 unrestricted DMZDouble ISP: Activated perpetualVLAN Trunk Ports: 8 perpetualGuests of the Interior: perpetual unlimitedFailover: Active / standby perpetualEncryption - A: enabled perpetualAES-3DES-Encryption: activated perpetualAnyConnect Premium peers: 2 perpetualAnyConnect Essentials: 25 perpetualCounterparts in other VPNS: 25 perpetualTotal VPN counterparts: 25 perpetualShared license: disabled perpetualAnyConnect for Mobile: 76 days allowedAnyConnect Cisco VPN phone: disabled perpetualAssessment of Advanced endpoint: disabled perpetualProxy UC phone sessions: 2 perpetualProxy total UC sessions: 2 perpetualBotnet traffic filter: disabled perpetualIntercompany Media Engine: Disabled perpetualCluster: Disabled perpetualInternal guests: 10Failover: disabledEncryption - A: enabledEncryption-3DES-AES: enabledSecurity contexts: by defaultGTP/GPRS: disabledPremium AnyConnect peers: by defaultOther VPN peers: by defaultAssessment of Advanced endpoint: disabledAnyConnect for Mobile: enabledAnyConnect Cisco VPN phone: disabledShared license Premium AnyConnect server: disabledSharing license: disabledProxy sessions for the UC phone: by defaultTotal number of Sessions of Proxy UC: defaultAnyConnect Essentials: enabledBotnet traffic filter: disabledIntercompany media engine: disabledCluster license: disabledHave you tried to re-apply your activation key for the license of security more?
If you don't have it available, you may need to open a TAC case to get worldwide license team to regenerate it for you.
-
Phone IP VPN SSL - necessary licenses.
Hello
Can someone confirm the necessary linceses for me to get this working. I understand that he needs to license "AnyConnect of Cisco VPN Phone" but what I also than anyconnec essentials? He is ASA 8.2 version and the license below news is for the ASA I hear delpoy it work on.
Thank you
The devices allowed for this platform:
The maximum physical Interfaces: unlimited
VLAN maximum: 250
Internal hosts: unlimited
Failover: Active/active
VPN - A: enabled
VPN-3DES-AES: enabled
Security contexts: 2
GTP/GPRS: disabled
SSL VPN peers: 2
Total of the VPN peers: 5000
Sharing license: disabled
AnyConnect for Mobile: disabled
AnyConnect Cisco VPN phone: disabled
AnyConnect Essentials: disabled
Assessment of Advanced endpoint: disabled
Proxy sessions for the UC phone: 2
Total number of Sessions of Proxy UC: 2
Botnet traffic filter: disabled
This platform includes an ASA 5550 VPN Premium license.
Hello
You need Anyconnect Premium license with Cisco Ip phone functionality enabled on ASA for the Cisco IP phone to use the anyconnect vpn functionality.
You can find more details from the following link:
http://www.Cisco.com/en/us/products/ps12726/products_qanda_item09186a0080bf292f.shtml
Kind regards
Bad Boy
P.S. Please mark this message as 'Responded' If you find this information useful so that it brings goodness to other users of the community
-
ASA 5510 Anyconnect licenses with Cisco Anyconnect VPN IP phone
Hi, hoping someone can shed some light on what I'm just more confused over trying to get by. Not sure if this goes in the section IP Telehpony or here...
We have an ASA 5510 with the base license. We need to install IP phones to home teleworkers, and I understand there are Cisco IP phones that have built-in VPN clients to enable a tunnel to the central private network. IT seems that you can't use Anyconnect VPN to do this, and I am trying to establish what upgrade licenses, we must apply to the ASA, as both Anyconnect licenses that you get for free on the SAA is not enough.
This is the phone that we seek;
I want to know is the Anyconnect Essentials license will work with these IP phones?
When I do a version of the show,
The devices allowed for this platform:
The maximum physical Interfaces: unlimited
VLAN maximum: 50
Internal hosts: unlimited
Failover: disabled
VPN - A: enabled
VPN-3DES-AES: enabled
Security contexts: 0
GTP/GPRS: disabled
SSL VPN peers: 2
The VPN peers total: 250
Sharing license: disabled
AnyConnect for Mobile: disabled
AnyConnect for Linksys phone: disabled
AnyConnect Essentials: disabled
Assessment of Advanced endpoint: disabled
Proxy sessions for the UC phone: 2
Total number of Sessions of Proxy UC: 2
Botnet traffic filter: disabled
This platform includes a basic license.
It shows "AnyConnect for Linksys phone: Disabled", it is the same for the Cisco IP phones? It is the kind of specific license, should I seek for Anyconnect on IP phones or will Essentials?
Hi Leo,
you will need 2 licenses: an Anyconnect Premium license and a permit «Anyconnect of Cisco VPN phone»
ASA 8.2 and earlier license "for Cisco VPN Phone" has been named "for phone Linksys' it's the same.
CFR. http://www.Cisco.com/en/us/docs/security/ASA/asa84/license/license_management/license.html#wp1487574
HTH
Herbert
-
Protection of personal information to the lock screen
Hey
I need to know one thing in Notification settings when we personalize the Notifications of Messages here Option to display the preview
But he knows such option in phone Notifications if someone calls and I missed his or her call it reflects the name of the same person in the form of lock for someone else read the same thing
so please help if there is no Solution
Hello
You can change this setting:
- Go to: settings > Notifications > phone - disable display on the lock screen.
-
iPhone 6 less sensitive after put 9.3.3 update
I have an iPhone 6 16 GB with operating system 9.3.4. After 9.3.3 update my phone started to slow down and block. That, the phone at any time. When the phone hangs up, I can't get to restart by the locking of the two buttons and the home method. So far, I've done the following: reset the cache, reset the system settings, resetting the phone, disable javascript, may reduce transparency, reduce motion blur, disable health settings and deleted about 5 GB of music storage. What is the next logical step? The phone is less than 2 years.
I assume you mean that you have improved your iPhone 6 of 9.3.3 to 9.3.4, not the other way around as you posted... correct?
If Yes, then based on what you have tried so far, I would say that you take a go-Genius Bar at your local Apple store to make them take a look.
-
Do I really need the 9.3.2 update?
I can barely touch my iPhone do not appear the notice should I put to 9.3.1 to 9.3.2 update. As far as I know, there is nothing in this update that I need or want, but I can't stop the pop ups. Any suggestions?
Go to settings > general > storage & use iCloud > manage storage (the first) > and if there is an update, delete it.
Then perform a forced reboot. Hold down the Home and Sleep/Wake buttons at the same time for about 15 seconds, until the Apple logo appears.
Next time you load the phone, disable Wi - Fi from the control centre. The update will automatically download again if the power and Wi - Fi. It is a hassle, can I just want to accept the update Apple wants...
-
iPhone 4S asking to set the password after 9.3.1
I'm helping to upgrade to an iphone 4s in 9.3.1. We get a message that the upgrade went successfully, but with a message that there are a few more things to do. Press to continue. Get a message that having a password would be a good thing for safety on top to define an access code screen. We do not want a password, nor have we a front access code. There is a "back" button. When tapped goes to the previous screen. Tapping keep coming back to the screen to set a password.
Is there a way around this message? I have not seen the screen. There a button on the screen to skip defining the access code?
R
This is an iPhone 4S
rccharles wrote:
I'm helping to upgrade to an iphone 4s in 9.3.1. We get a message that the upgrade went successfully, but with a message that there are a few more things to do. Press to continue. Get a message that having a password would be a good thing for safety on top to define an access code screen. We do not want a password, nor have we a front access code. There is a "back" button. When tapped goes to the previous screen. Tapping keep coming back to the screen to set a password.
Is there a way around this message? I have not seen the screen. There a button on the screen to skip defining the access code?
R
There is usually a dumpster or set later button. However if this phone has an e-mail exchange work on this account, this could be the reason why this option isn't there.
otherwise put in a generic password, and after setting up the phone - disable the access code, be sure to write down it
-
Cisco Scan host (Hostscan_3.1.04082 - k9.pkg)
Hello community,
I recently bought an evaluation license to check our remote users primarily, Advanced endpoint for our ASA5505 antivirus and firewall. What I understand, it's that this feature requires the above license and also Anyconnect Premium peer to be activated. My "show worm" indicates that these licenses are activated. See below.
The devices allowed for this platform:
The maximum physical Interfaces: 8 perpetual
VLAN: 20 unrestricted DMZ
Double ISP: Activated perpetual
VLAN Trunk Ports: 8 perpetual
The hosts on the inside: 50 perpetual
Failover: Active / standby perpetual
Encryption - A: enabled perpetual
AES-3DES-Encryption: activated perpetual
AnyConnect peers Premium: 10 perpetual
AnyConnect Essentials: Disabled perpetual
Counterparts in other VPNS: 25 perpetual
Total VPN counterparts: 25 perpetual
Shared license: disabled perpetual
AnyConnect for Mobile: activated perpetual
AnyConnect Cisco VPN phone: disabled perpetual
Assessment of Advanced endpoint: activated perpetual
Proxy UC phone sessions: 2 perpetual
Proxy total UC sessions: 2 perpetual
Botnet traffic filter: disabled perpetual
Intercompany Media Engine: Disabled perpetual
Cluster: Disabled perpetual
This platform includes an ASA 5505 Security Plus license.
Now to my question. What should I do to activate this feature? No matter what I try, the test of remote access from a Windows 8.1 with anyconnect 3.1.04072 all have access to the network regardless of my parameter in ASDM.
That's what I did after actication of license and a reboot:
1. from ASDM, 'Configuration'--> remote access VPN--> host Scan Image: Browse flash for
hostscan_3.1.04082 - k9.pkg and enabled "activate host Scan/CSD. Then apply and save.
2 restarted ASDM.
3. from ASDM,--> Configuration--> remote access VPN--> Secure Desktop Manager--> host Scan set up Advanced Endpoint Assessment worm 3.6.8133.2--> added F-secure.
4. apply and save.
When I try to connect with my 8.1 anyconnect - machine Windows (with no F-secure antivirus installed) I see that the Anyconnect client makes a hostscan but no matter what I do the machine will ignore my settings for Antivirus, etc. and get full access.
What Miss me? I have to create a DAP aswell, or shouldn't it work without one?
Note: Our Anyconnect authenticate using RADIUS with stimulus / response, but I guess that would not affect as the host-scan will be performed prior to authentication.
Thank you in advance,
Best regards
A DAP rule would take care of it. This is where you must create a rule to search for attributes of endpoint as process, files, the key to registry or something else. In light of criteria coupled or unmatched, you can decide to let them continue, quarantine or delete the connection. DAP rules are capable of much more, but from reading the above, it seems that you are wanting to do either connect or disconnect the installed AV-based. Does that answer your question?
Thank you.
Joe
-
Cisco AnyConnect do IPsec?
Hi guys
I have a Cisco ASA5520 with software Version 8.2 (5) in place, most my users are Mac users and I am currently looking into Cisco AnyConnect in comparison using the VPN client.
I have a few questions
(1) Cisco AnyConnect does he use IPSec or is it soley based SSL VPN?
(2) the license information I have in my ASA below, I understand that I can get max 750 vpn peers am however I have reason to say that this does not apply to Cisco AnyConnect peers? and with Cisco AnyConnect, I can only have 2 peers? Also, what are the options for mobility anyconnect for?
The devices allowed for this platform:
The maximum physical Interfaces: unlimited
VLAN maximum: 150
Internal hosts: unlimited
Failover: Active/active
VPN - A: enabled
VPN-3DES-AES: enabled
Security contexts: 2
GTP/GPRS: disabled
SSL VPN peers: 2
Total of the VPN peers: 750
Sharing license: disabled
AnyConnect for Mobile: disabled
AnyConnect Cisco VPN phone: disabled
AnyConnect Essentials: disabled
Assessment of Advanced endpoint: disabled
Proxy sessions for the UC phone: 2
Total number of Sessions of Proxy UC: 2
Botnet traffic filter: disabled
(3) when you try to configure Cisco Anyconnect on the SAA by using ASDM, I noticed that I needed to download AnyConnect client images, but when I did this by downloading the .dmg for mac machines file I got the error message 'not an image valid of the SVC'. Is it because I'm under 8.2?
Your help is highly appreciated
Concerning
Mohamed
Hi Mohammad,.
I'll answer your questions one by one:
1 cisco Anyconnect version 3.0 and above all support SSL and IPSECv2 connection. If you want the user to connect using the Anyconnect client IPSECv2 then it will consume the SSL license and not the IPsec license however if you use IPSECv2 for connections such as vpn site to site then it will consume normal IPSec VPN license.
2. one. SSL VPN peers: this license gives you information about the number of users that can connect using SSL protocol for example using the Anyconnect and web portal customer also known as the clientless VPN based on. I see here there are only 2 licenses so at any given time only 2 users can connect successfully because 750 is the total number of licenses available for the VPN on the SAA, 698 only will be available for IPSec connections.
b. Anyconnect for mobile: this license is required whenever a user connects from a Pocket like device: Iphone, Ipad, tablets etc.
c. Anyconnect of Cisco VPN phone: Cisco IP phones have the ability to connect to an ASA remote using the SSL protocol and to enable this feature, you should have this license is activated on the SAA.
d. Anyconnect essentials: Anyconnect there are two licenses, one > Anyconnect Premium and b > Anyconnect Essentials. AnyConnect essentials is less expensive as premium per report Anyconnect license. This license is for those who don't use webvpn or VPN without client. When the license is activated, the user can connect only to the Anyconnect VPN client.
3. I don't know what image you use on the ASA. Please try the image named as anyconnect-macosx-i386 - 2.5.2010 - k9.pkg.
To apply the changes using the command line, put this image on disk0: and then type this command on the CLI.
Image disk0:/anyconnect-macosx-i386-2.5.2010-k9.pkg SVC
Let me know if it helps.
Thank you
Vishnu Sharma
Maybe you are looking for
-
automatic search in the address bar does not work
I used to be able to type a word in the address bar (or rental) and I would like to get done for the best site that google might think. If I typed 'dogs' in there and press ENTER, I would go to the dog of wikipedia page. If I type "hotmail", I'll get
-
Re: Display the update driver on Satellite L655-1Jn
I'm waiting for the update of the display driver for my laptop Satellite L655-1Jn. Is it possible that the update has been release 8.7? In the ATI site, the latest available driver is 11.10, is there another way to install the new drivers without wai
-
Is there a way to restore a computer back to complete the factory settings?
-
How to get an external monitor like main screen...
Hello... The monitor on my HP Pavilion dv9830us PC laptop has not worked for some time and I had to use an external CRT monitor for my screen. A few nights ago my operating system (Ubuntu Linux 10.04) failed to load and because I can not get flow to
-
Just hooked up my new fuse. Rhap recognizes it, but when I right click on it in Rhap, I don't have the option to authorize. I have records left in Rhap. I'm in MTP mode and media player 10. Thank you!