Phone have not answer/ignore for incoming calls

About a week, my phone started to act up by showing not unable to answer or ignore incoming calls. I tried to restart the phone and messing around with setting but nothing. Anyone put an end to this problem?

Salasavandy wrote:
I didn't even update to the pacifier.

In this case try to do it to see if it will help you.

Go to settings > personalization > manage notifications, press the tab "All".

Search for InCallUI and check if the box is check.

Then it should work fine.

Tags: Sony Phones

Similar Questions

  • A369i displaying not a name for incoming calls

    I bought an A369i a few months ago. It worked all fine, but now, ILA does not display contact names, number only. I tried to save format + 91 contact no.s and not starting with 0, but don't work. I also deleted all the data of the phone app, but even as before. Help, please!

    Finally found the solution. Conatcts were saved as + 91 xx xx xxxx, changed to the + 91xxxxxxxxxx. It works!

  • Why can I not hear my 6plus iPhone calls after loading the Apple Watch? If I don't answer the iPhone instead of the Apple Watch for incoming calls?

    Why can I not hear my 6plus iPhone calls after loading the Apple Watch? If I don't answer the iPhone instead of the Apple Watch for incoming calls?

    Hello

    It can help to cancel your iPhone in a Bluetooth headset pairing, if it is currently associated with it.

    -On your iPhone, go to: settings > Bluetooth > tap the info "i" beside your headset > tap Forget this device.

  • 3 of the 6 slides quiz show "you have not answered this question completely" in the first entry of slide

    I'm working on a project in Captivate 5. I have distributed 6 slides of question about the whole project. Q1 - 3 are working very well, at the entrance to the Q4 - 6 slide, the learner receives the message "you have not answered this question completely" even if it's the first time, they enter the page. They get stuck, just have a 'return' to them button returns to the previous page, in the output of the previous page, they receive the same message again. No retry option. The only way forward is to use the button next to the playback bar.

    The parameters of my 6 questions are the same (classified, 3 attempts, continue on the success and the last attempt).

    I figured it was because I had duplicated the question slides in order not to have to do all the formatting again (would be curious to know: I can do it without problem?) - but it seems that this was not the reason. I created 2 of 3 does not q from scratch and still have the same question.

    Then, I thought it's because by clicking on an icon on the previous page, they can move to page Q without listening to the entire slide - that solved the problem in preview, but after publication it came again.

    I'm totally lost here - would appreciate help from experts!

    Thank you


    Anja

    This "you have not answered this question" message normally appears only once the user has tried the test at least once and review Quiz button has been clicked on the Quiz results page.

    However, it may also appear if Captivate think user jumped out of the reach of quiz, then jumped into the new.  At that time, Captivate blocks all questions and show this message for any question unanswered.

    So there must be something on your project, you have not told us until now.  Where's the Quiz results for this project page?  AFTER all the questions quiz is 6 located?  Is your project using maybe ramification that could Captivate think that you skipped range outdoor quiz?

  • Different unlock the screen for incoming calls?

    This weekend, I noticed that my unlock screen differs for incoming calls. I admit, I was in the cardiac ward at the hospital, but I'm now at home and it's always the same. Instead of throwing away them from side to side, they are upstairs and downstairs. It still works the same, but the layout is different.

    Did you perhaps install an app that does this and you don't know that he had this feature?  I think it's kind of cool.  I want my phone to do.  Thanks for sharing the photos too.

  • the settings have not been saved for the iphone because it was not found

    the settings have not been saved for my iPhone 5 because it was not found

    Nappys wrote:

    the settings have not been saved for my iPhone 5 because it was not found

    OK thank you very much for sharing your question vague.

  • GoogleMaps forgotten password of account & have not enough data for Google password recovery.

    Original title: how to find a password for automatic login

    A PC that I use automatically sign me on my account from Google Maps. I need to connect to another PC, where can I find the password on the old PC that I forgot & have not enough data for Google password recovery? I'm assuming that the PC should hold a place to confirm that I'm talking about the known URL

    Hello

    Since you have forgotten the password of account Google Maps & have not enough data for Google password recovery, you must get in touch with support from Google to get help.

    For more information, see the links in Support of Google:

    Sign or not Google Maps

    Known issues

    Let us know if you need help with Windows related issues. We will be happy to help you.

  • BlackBerry Smartphones for incoming calls caller ID displaying DO NOT name of contacts (phone number only views)

    Whenever I receive an incoming call, the caller ID shows that the phone #, even when I have that number corresponded to a contact.  Since I have not much phone # stored s, I have no idea it's someone I know.  However, the contact name appears in the diary of appeal, but not on the initial display of incoming call.  How can I get caller ID to recognize and display the name of the contact with the phone #? Any help would be greatly appreciated!  (I have the blackberry 8520)

    Thanks, Lauren

    Hello and welcome to the Forums of Support BlackBerry.com.

    It could be one of the three solutions... Try these:

    1. make sure that you set your own country code to the Phone Dialer screen > Options > smart dialing.
    Set your country code in this format: "+ xx" where xx = country code. Some countries have two or three-digit country Codes. Do not place not the '+' in the entrance of your contact.
    * In the United States, the value of this country as '+ 1' Code and place your local area code in the appropriate box (this normally the default setting in a new BB).

    2. in the same place, change the length of National number for the number of digits corresponding to your country (since some countries have less than 10 as that set by default in the BB). Check out the total numbers, less country code. Do not place not the '+' in the entrance of your contact.
    * For example, some countries have a total number to 8 (more than 3 for the country code). You must enter '8 '.

    3. you probably have "Content Protection" located on your address book.
    Look at the Options > Security > General settings. Scroll down to the content Protection > include addresses = no

  • The phone rings does not for incoming calls! / spa2101 connected to the router

    Hey guys,.

    I had this problem for 2 weeks now, my outgoing calls are fine but with the receipt of custom just phone sounds sometimes. He usually works once I restarted the adapter, then after an hour on the phone used ring when I test it.

    I opened the ports on my router (5060-5061) and the firewall is disabled.

    BTW: I have this software called xlite and when I tried to call for that, it worked fine but the phone did not respond. im guessing theres some configurations that must be accomplished, but what is the question =)

    Thank you for any response

    Hello

    You must change in the line-1/2 tab:

    NAT mapping enable: don't-online Yes

    NAT keep alive enable: don't-online Yes

    Then, you can control the interval keepalive on SIP tab:

    NAT Keep Alive Intvl: (def = 15)

  • Unplug the headphones of Walkman app silenced all functions of the phone except for incoming calls

    I found a bug that caused the alarm become silent. I am able to reproduce consistently and ahd a firend with a different Xperia V confirm.

    I use using a Sony build 4.1 version (. 490) with ADWLauncher (but my friend was also able to reproduce this with regular Sony Launcher, also on the 4.1 build)

    to reproduce:

    (1) check base case: all applications closed, adjust the volume to maximum using rocking of the volume on the side of the phone. to release the keys, you should hear a tone giving you the current volume

    It also means that the sound works

    (2) plug in headphones

    (3) open app Walkman and listen to a song

    (4) once the track has begun and you can hear in the headphones, unplug the earphones

    track must stop (correct behavior)

    5) press "Home" to return to the home screen

    (6) repeat step (1)... sound is now DISABLED, autour and shows volume knob slides it is not cut, but when I release the button it does not play the sound

    critical, it also cuts the alarm

    (so if you want that the game alarm for 2 minutes in the future before the departure the sequence above, when it fires it is silent after steps 1 through 6 have been made)

    some things that eliminate the effect once it arrives in this State buggy: If you receive a phone call, then he makes it sound and after the call, his resume (no matter what you did with the call - ignore, answer etc, all that is needed is for the phone to ring)

    also sometimes re - insert and remove the earphones also restores sound

    phone is fully updated from the Google store set to have the latest versinos of applications

    I tested this same sequence using other music apps (of rocket, Google Reader Play Music) and the phone has NOT lost his after step (4) and everythnig functioned normally.

    This bug seems to be isolated to the sony Walkman android app.

    I quite like the walkman for sony hopy app can look at this and fix it with an update of the application itself - as all other music apps I tested are causing not easy

    I do not know if this was presented in a recent version of Walkman or the 4.1 update... Maybe someone could test on a pre-version 4.1 phone to see if it still happens

    the recent firmware 9.1.A.1.140 seems to fix this problem. was not able to reproduce once I have updated.

    Thanks sony!

  • Screen / phone does not not during the current incoming call.

    All;

    I just noticed this behavior 2 days ago and it went this AM as well. During an incoming call, I tried to access the data on my Bravo but the screen was dark and pressing the unlock/lock button at the top has nothing more than any other control. I haven't lost the appeal and I got the info written down, so I got to the question on the ground. As soon as the call is completed, I could see the screen by pressing the menu and then command unlock the phone with the swipe.

    I also noticed that there are no e-mail messages. I decided to power off the device (soft reset). Messages, then went down, but 2 days ago I did not have a message problem. But had the black screen and no access to the phone during the call. I've not seen this with outgoing calls. I have no trouble to access items on the phone call I have orginate. All the world has noticed this incoming call blocking? It would almost seem that controls spend sleep during incoming calls. I have not found references in this regard so far.

    I found that when the phone is turned off and then back on most of the problems are solved. Since I'm old to computers in general this is not a surprise but falls into the area of practice or standard procedure. I will say that the absence of data loss during these resets is a good thing.

    Carl


  • PAP2T - calling for not having tone on incoming calls

    After several rounds of configuration, almost everything seems to work on my setup using the Cisco Linksys PAP2T-NA VoIP. The only problem that I face now is that anyone calling my number will not get a dial tone, even if my phone rings normally and if I have the phone, the call passes by normally pickup. But not having is not the tone on the side of the appellant sometimes makes them wonder if the call was successful, and then sometimes they will eventually cling.

    My SIP provider is justvoip.com and my DID is didww.com

    Anything else I should look?

    Thank you very much!

    Ricardo.

    The "target phone rings", also known as the "reminder" signal is sent into the goal of management-> caller.

    There are two basic types of message SIP world.

    The first (type 180) is just message - «target sounds» This type of signal wear no special tone. It is the appellant PBX (or phone same visitor) to play the sound signal.

    The second (type 183) message "I'll give you tones of progress to appellant by oneself." This type of signal begins one-way audio channel to the caller, tones of progress, including the ringing of waiting, can be passed trough it.

    The first type is preferred. The reminder signal is generated alongside the appellant - so the known caller signal is generated (also no bandwidth is consumed to complete). The second type is mainly used to transport non-standard signal, oral messages or so.

    To complicate matters, any PBX on the path can consider changing the message type 180 to 183 and vice versa.

    PAP2T responds 180 all the time. According to your description, it seems that someone considered as ask "I'll play the audio signals", but then it plays no signal. Or a person considered cutting the audio (not every operator allow audio to pass through its network beginning) but has not returned 183 message message 180.

    It may be your VoIP provider, it is the upstream provider, the provider carrying the call to PSTN, an operator of transit to the PSTN and same origin operator RTC on call side.

    Nobody will not disclose the path to the appeal to you - it is considered to be trade secret. And even if you know it, you are not eligible to call all operators asking them to do something. You have no business relationship for them, or you can provide details of calls (known for 'previous-in-path' operator only) for them.

    As I said in a previous comment - if the calling user is affected by a problem, then it must report it to their operator. This operator will review the question and ask the jump according to operator assistance if necessary. Same procedure is repeated until an operator at the origin of the problem will be reached.

    Well, you can complain to your carrier, but it is may not be able to help.

  • SmartBand SWR30 does not pick up an incoming call using phone Sony Xperia Z3

    When an incoming call is display on my Sony comes Z3, vibrates to the smartband, but the call is not picked up on the smart band when I press the function key.

    Everyone knows the same problem

    Reset the Smartband:
    http://support.sonymobile.com/global-en/swr30/Userguide/resetting-the-headset/

  • Low sound Volume for incoming calls?

    I work in an area that has a constant decibel about 55 to 70 decibels throughout the day. The question that I am running missing phone calls because I can't hear the phone ring above the production area when he is on the ground.

    I did a test with a colleague who has the Droid Maxx and another who has a Razr Maxx HD with Nanotubes Ringtone that is ringing loud... very loud ring. You can find it in ringtones. Clarity is not the problem, but the noise level that it can produce to carry the sound is way lower then previous versions.

    The Maxx Droid and Droid Razr Maxx HD hit over 100 decibels on phones in the next calls.

    Droid Turbo barely touched the 75-85 and struggled.

    I think that there should be a standard to test out cell phones before being released on the noise levels. I hope it's something that can be fixed with a software update.

    I'll also open a ticket with Motorola Tech support on the issue.

    See image for App, I did the test with decibel-O-Meter in playstore

    RAZR Maxx HD Image

    Please mark for the Mark and Matt or...

    By Tech Droid Turbo has a decibel of around 75-85 decibels, and I asked to make a remark that I need at least 100 decibels to hear my camera in a semi noisey environment.

    Can I have someone this flag for the brand and or Matt in past a long to the engineers to see if something can be done. If we can't do something can Motorola now put the side of decibel on the SPEC Page that I know what my device will ring to.

    Thank you!

  • Portege R600 - software SIM card which warn for incoming call

    Hi all,

    I just plug my sim card in my laptop, everything works :) but I have a quesiton...

    Is it possible, (when someone call me while my sim card is in the laptop) some software or that never notify me of incoming calls?
    As there is an option to play sounds on my laptop when new cams sms message.

    Thank you.

    Hello

    This software is not known to me and to be honest, I doubt that it s is available on the market, but google a bit... maybe you will be lucky
    I n t could find none :(

    Cheers mate

Maybe you are looking for

  • Process to install devours the application memory.

    I hope that someone can help me, I'm a 2013 MacBook Air running OS X El Capitan (10.11.6) according to a system to update a few days ago my laptop slowed significantly (by moving the cursor would trigger the spinning Rainbow). I've identified what I

  • Game Center

    When I updated my iPod Touch 6 G iOS 10, Game Center icon disappeared. Is it possible to get it back?

  • iPhone 5 from ios6 to ios9

    Hello! I have some problems to upgrade my ios6 to ios9.2.1. Every time, when I try to do, there is a message "Unable to install Update" and if I choose the settings, next message button is "almost complete storage", but I have 8.2 GB available on my

  • 2008 R2 web limits Server edition

    I try to install the support tools on Server 2008 Web, but it does not cscripts or xcopy.  Is it all still around that.

  • I lost my Windows Vista installation disc, but retain the product code, where can I get a replacement disk?

    It has been a while since I have Vista and I had it installed on pc crashed, so now I need to reinstall Windows on it. I still have the product key, but I lost the installation disk and I wonder where I could get a replacement drive.