Phone smart BlackBerry Smartphones had a problem connecting to the server - 8520 new message

Similar Questions

• Your device blackBerry smartphones had a problem connecting to the server

  I have a Bkackberry Curve 9300

  T-mobile phone operator

  Knology is my internet

  OS 6 is underway on the BB

  What is the problem with my phone now? Usually, I get the error "this application has encountered an error and cannot continue" I want just my email in return. For the most part, I get "your device had a problem connecting to the server.

  I hope you can help.

  Kelly J

  Hello and welcome to the community!

  I suggest the following, in order, even if they seem redundant to what you have already tried (steps 1 and 2, each should result in a message to your BB to come...) Please wait for this before moving on to the next step):

  (1) registry HRT

  • KB00510 How to register a BlackBerry smartphone with wireless network

  (2) remove and return Service directories

  • KB05000 Remove the maintenance book for the BlackBerry Internet Service email account in the BlackBerry smartphone
  • KB02830 Send the directories for the BlackBerry Internet Service

  (3) restart to take batt

  • Each time a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  I hope that will move things again for you! If this isn't the case, then you should contact TM for formal support.

  Good luck!

• Your device blackBerry smartphones had a problem connecting to the server; BB Torch

  I have a BB Torch.  I did no recent changes or updates to it.

  It's not getting any emails since yesterday afternoon.

  When I tried to test my email settings, I got this error message. "your device had a problem connecting to the server.  Try again? »

  Any ideas on what to do?

  Medio Waldt

  Remove the cover on the back and remove the battery.

• Application of blackBerry Smartphones Email Setup cannot connect to the server.

  We lived in Dubai and moved home to Omaha NE.  We had ATT go phones for Omaha, BB makes bold to Dubai. I took the my ATT sim put in bold, and everything worked perfectly.  I did the same for Ken and his phone and SMS works, but email will not send or receive. His "BOLD" is a little newer than mine 9780.

  When I click on setup of e-mail, the application initialization displays this message, "your device had a problem connecting to the server to try again Cancel" we have ATT connections and Wi - Fi and Bluetooth connection works.  The GPS knows where we are.  I can't understand the problem.

  Hello and welcome to the community!

  I think you need to talk to AT & T. From what I can see, that it looks not to the network AT & T natively supports the 9780 for automatic recording of THS and automatic distribution of maintenance book, which are necessary in order to receive all exclusive services BB (including e-mail). In addition, you must be a subscriber to a package of data from AT & T that activates the services you want - I doubt that the plan 'go' includes BB services.

  What I think is happening is that your BB continues to receive services of BIS of the carrier of Dubai, even if your BB is flowing on the ATT network. This can happen, but only until he discovers the carrier of Dubai and it stops at their end. I suspect that for Ken carrier of Dubai has already stopped all services... from where the reason why his BB can get no exclusive BB service.

  Get a BB to work on a medium that is not natively supported the specific model number is very very tricky... you can usually get services voice-level (for example, calls, voice mail, SMS), and sometimes even generic data services (for example, web browsing), but not exclusive data BB services (BBM, email, etc..).

  Then, talk to AT & T to be sure that you can use in fact entirely of these devices on their network... you need to ask him the question very specifically-"your network natively supports it of my 9780 for automatic recording of HRT and Service delivery book?"

  Good luck and let us know!

• There was a problem connecting to the server 'SERVER NAME' error guard appearing

  There was a problem connecting to the server 'SERVER NAME' error guard appearing even though the server is not on my current network.  I recently moved my iMac to a different location and a different network, and now he constantly tries to connect to the old server.  This message appears every 30 seconds and several of those who appear (see pictures) it's extremely frustrating because it makes the machine almost useless because I am constantly closing them.  No matter how many times I try to stop the activity monitor it it keeps reappearing, and I even tried a few terminal commands that I found online, then restarted the computer, but still had no success.  I would appreciate all the advice really.

  I hope that gives you an idea of what I got!

• Problem connecting to the server, error connection server and printer offline. I have a HP photosmart printer and Windows 7?

  My printer is not printing. It say problem connecting to the server, connection error server and printer offline. I have a HP photosmart printer and windows 7.

  You have McAfee? McAfee has been updated at the same time as the last batch of updates from Windows 7 and it seems to be the cause of this problem for most, if not all, users.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

  I got McAfee, but the connection has started working again on its own so I thought I was clear of problems. However, when I checked it says he was doing routine checks the updates in vain when I told it to do a manually. So stick with McAfee you don't follow their procedure of fix would have upgraded my PC at risk by not updated and, like other McAfee ads have since explained, the application did not refer to its database of threats correctly [and this could explain part of the variability of the symptoms of failure but all involved loss of internet connection]. Actually, I removed McAfee then installed Microsoft Security Essentials rather & my answer IE is faster I knew it [even though I had the Add-ons McAfee disabled for centuries].

  I had to run the removal of McAfee Development tool a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

• Problem connecting to the server

  Whenever I open the pictures, I get an alert that reads: 'there was a problem connecting to the server "my-server", which is another Mac on my network.

  If I close the dialogue box, Photos keeps trying to connect and it appears again a few seconds later.

  Does anyone have an idea as Photos is all this and how I can stop doing?

  No idea - don't forget we can not see you if you have details

  We do not yet have an idea what software you use or you use 'MyServer' for

  What are the versions of the operating system and Photos do you use? What is your server? How are you connected to it?

  LN

• Problem connecting to the server after moving

  Hi, I keep getting the message "there is a problem connecting to the server"192.168.0.19"etc. This happened after I moved. New ISP, new router. I have an Airport Express and a NAS connected to it. Time Machine and Icloud on the NAS. I think that the NAS has this IP address before moving. There are now 192.168.10.176. Everything works, but I get the pop up frequently.

  I look at the accounts and start but nothing. I reboot safe mode does not remove the problem. So, what can I do?

  I'm on Yosemite with MBR.

  Can you connect using the new IP address?

• Server connection error:-1 there is a problem connecting to the server... hp photosmart 5510

  HP photosmart 5510 e - while a printer B111a

  Windows vista 32-bit

  connection error message-Server error:-1 there was a problem connecting to the server, press Retry or ok to continue

  No changes have been made to my operating system

  Try to add new applications with eprint center of my Compaq Presario CQ60 laptop to my HP printer. Computer tells me that the new applications are there and ready to use, but printer says 'server connection error "? I followed all the instructions to connect to the wireless router, but I'm not sure how to connect to the "Server"?

  The steps below a usually resolve the problem you are experiencing:

  1. unplug the power cord at the back of the printer.

  2. unplug the power cord at the back of your router (and the modem, if they are separated from the router).

  3. wait 20 seconds, then plug the router (and the modem, if necessary) in.

  4. wait for 30 seconds, then plug the printer back and power.

  5. press the button on the front of the printer ePrint, and it should try to connect to Web Services again.

  These steps usually fix the problem, but if it persists, you can try definition of network information static for the printer (which is sometimes useful to stabilize the ability of the printer to get outside of your network to the internet):

  1. tap the wireless at the top of the screen of the printer and note the IP address.
   
  2. Enter the IP address in the address bar of a web browser on a computer and press on enter or click the go button browser.
   
  3. the printer status page must be open.  Click network in the upper part.
   
  4. click on networking on the left.
   
  5. Select the Proxy settings.
  Note: If you are prompted for a redirect, click OK.  If you receive a certificate warning, select the option that allows you to continue anyway.
  If you receive an internal system error, refresh the page until it loads the proxy settings.
   
  6. check that all fields are empty.  If they are not, make them disappear and make sure that the Proxy Server requires authentication is unchecked and click on apply.  You should get a success message.
   
  7. click on the network address (IP) on the left.
  Note: If you only configuring IP address and DNS address with a yellow note Configuration, refresh the page until it loads completely.
   
  8. leave automatic IP IP address Configuration.
   
  9 change the DNS address to the manual DNS Server Configuration.
   
  10. enter manual for the manual preferred DNS Server 8.8.8.8 and 8.8.4.4 for auxiliary DNS.
   
  11. click Apply and you should get a success message.
   
  12. turn off the printer for 30 seconds and then turn it on again to force the new settings take effect.

  Let me know if you have any additional questions. Thank you!

• Why my blackberry used blackBerry Smartphones allow me to connect to the wifi no checkmark?

  My blackberry 8520 curve does not connect to the wifi and there is a whitedash in the area, whereas it should be a green check mark...

  I have airtel connection wi - fi and router DIgisol instead of my house...

  Hello

  Read these articles and see if they apply.

  Thank you

  Bifocals

  KB03892 Differences in browsers on the BlackBerry smartphone

  Includes a video describing the different browsers and contains the following links to correct this information, see:

  • KB11678 The BlackBerry smartphone user cannot connect to the Internet with the BlackBerry smartphone.
  • KB03710 The Internet browser icon does not appear on the BlackBerry smartphone.
  • KB12971 The BlackBerry smartphone user is unable to display a specific web page using the Internet browser.

• Cannot install: problems connecting to the server

  I have a problem when installing the new version of Skype, whenever I have install and starts to say there is a problem to connect to the server, download Skype alternative, and when I do it here it again when I install, can someone help me with this problem of server?

  What Setup you're trying to open?

  The only what you have to do is copy the Skype.exe and Login.cab files and paste these files the installation of Skype folder or even any new folder on your computer.

  If you extracted all the files from the SkypeSetup_6.18.0.106.msi file, then you should be able to find the Skype.exe and Login.cab files in:

  \SourceDir\Program Files\Skype\Phone\

  

  

• "Problem connecting to the Server Web Services." - HP Envy 100

  Hello world

  I wonder if anyone has the same problem as me. I just got a HP Envy 100 and went through the process of setting up without problem. The printer is connected via Wi - Fi for wireless network, I can ping the printer from my Mac successfully and I can print within the network without problem.

  However, regarding ePrint and Web features, it seems that nothing really works. I can't even turn on Web services, I always get the message "problem connecting to the Web Services server.

  I tried the following:

  -Restart the router and printer

  -Change the manual IP address and manually set the DNS server

  -Reapply automatic IP and set the Google DNS (8.8.8.8 and 8.8.4.4) servers

  .. .with no chance whatsoever. If this is a problem with the firmware (from what I understood, I do not have the latest firmware, but I can't ask her update, because it requires, you guessed it, a connection on the server of web services, that is the whole of the problem.)

  Anyone else having the problem? Everyone had it and fixed it? Is this just a temporary problem with HP servers?

  Thanks in advance!

  Hey, for me it works as well, and I didn't, just retried that I had tried before and it connected to the Web Services without problem.

  So I think it's safe to say that the original problem in this topic only lied to a HP Server-side problem. Not cool it took so long for them to solve and in particular the fact that we did not really have feedback appropriate about the problem.

  Anyway, I solved (for now, at least).

• Check error: there was a problem connecting to the server Apple ID

  When I try to connect to my iTunes on my Windows laptop account it is said there is a problem connecting to the Apple ID server. This problem did not begin until 2 days. I have the latest version of iTunes and Windows.

  What is the number of the version of iTunes?

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  Start by missing error MSI.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  Leave a post by: turingtest2

  On the PC, when connecting each device, it loads a separate driver. You can try this trick when you want to get iTunes recognizes the iPhone 6. Thanks to the user of the CSA turingtest2 for the tip.

  Try the following:

  Open Control Panel > Device Manager

  Plug in your device

  Locate Bus USB Controllers > Apple Mobile Device USB Driver.
  It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.

  Right-click and select software update of the driver...

  Click Browse my computer for driver software

  Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
  C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers

  Click on let me pick from a list of drivers for devices on my computer

  Click on Apple Mobile Device USB Driver

  Click Next, then close and exit the Device Manager

  Leave a post by: ChrisJ4203

• Photoshop does not - open "problem connecting to the server.

  I'm having a problem with Photoshop is not opening.  It opens, and load it, but then I get a pop up notifiaction saying:

  ' There was a problem on the server 'server name' connector

  The server may not exist or it is not available at this time.  Check the server name or IP address, check your network connection and try again.

  Server, as it is at work, because I have the opportunity to take my laptop to work.  I get error at home, when I'm no longer connected to the server, and on a totally different WiFi network (the server is through WiFi). I tried to restart and turn off WiFi all together, but I still get the error each time.  I don't want to uninstall and reinstall because I recently moved, and I don't know where my box is provided with the serial number.  I use Photoshop CS on Mac 10.7.5 5.5 (Macbook Pro).

  Any suggestions?  Thank you.

  Looks like you put a link/alias/shortcut in Photoshop file to a network server that is not currently online.

  Check all the stuff in your Photoshop file that you changed (plugins, presets, expansion boards, etc.).

• Phone smart BlackBerry smartphone connection failure when you try to synchronize contacts

  When I try to synchronize my contacts with outlook all of a sudden, I get a message that says: "the device cannot connect. I've recently upgraded to 4.7 DM. I don't know if this could have something to with it. Now, I tried to uninstall this upgrade and go back to a previous version of DM. Any ideas on what could cause my BB to not be more recognized by my system?

  Thanks in advance!

  Just, I solved the problem by pulling the battery and then plug the BB into my computer. This something reset and now it works. Weird. Thanks for your reply.