phone unlocked even after factory reset?

Similar Questions

• If I used a creative combination on an old computer, then installed in my new computer but had to do a factory reset on computer; I could still install Creative suit on the same computer even after factory reset with the CD?

  If I used a creative combination on an old computer, then installed in my new computer but had to do a factory reset on computer; I could still install Creative suit on the same computer even after factory reset with the CD?

  Yes, you should be able to reinstall, but if you can you should disable before resetting the machine.  Otherwise, if the two license activations were used and no reset you will need to contact Adobe Support by chat and ask them to reset your activations.

  Chat support - the link below click the still need help? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat
  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

• Pavilion DV6 - Freaky blockages, probs even after factory reset

  I have a machine that currently gives me fits customers...

  It's a Pavillion DV6, specifically a M6-1045dx.  He got 8G of RAM and the HARD drive is full of barely 10%.  When I got the machine, he would refuse to run some executable files (most had IE) and anything requiring a UAC elevation cause the application is high (command prompt, Task Manager, etc.) to lock.  Scanned with MS Sec Essentials and spybot... even out the hard drive and scanned with AVG in another PC of office... None of them can find nothing.  I noticed that after I let it sit for a while (30-45 minutes), it gives an error and say a few words about support assistant having to close.  I tried to close all the HP services, but nothing helped.  CHKDSK /F does not give any errors, and the BIOS HP diags gave a certificate of good health.  I couldn't "show processes from all users" in the Task Manager (Task Manager would freeze whenever I tried).  In addition, the system seems to work fine in SafeMode w/network.

  I finally lifted my hands and did a reset (Note: I don't have the minimal reset).  Who took most of the night running.  Then, I made a full round of microsoft updates.  Note that the system was very well throughout the reconstruction process.  Then I restored the owners (1 piece of court reporter software) applications and some data (especially text files and audio files of deposits).  The system ran fine for another 5 boots - two hours.   The last thing I did was to install MS Security Essentials... and he gave me a certificate of good health after update.   I closed the thing and and let stand until the customer arrived there.   The minute that I pulled up, he began to show the same signs as before the factory reset.

  Support Assistant does not start... it's welcome screen just sitting there.  Internet Exlporer will start or the other.  If put in place processes in the Task Manager and click on 'view of the processes for all users', the Task Manager is locked in.  Command prompt oneself too if you do a "run as Administrator".   The owner tells me that if you let the machine sitting (when running) for 30-45 minutes, which will be suddenly started working.   Since then, I tried Kaspersky TDSSKiller to see if it was a rootkit, but he did not find anything there either.

  Anyone encountered this before?  Is there something that I need to update, re - install or uninstall?

  Thank you!

  Mike

  If anyone knows this, it seems that it is a Microsoft Update that threw a wrench in the works.  After a 3rd plant, he went through a whole series of updates, then failed on the last series of 8 or more.   I did a system restore and looked at the 3 updates... do a search on all of their numbers.  Of course, there are a ton of develops griping on KB2870699, alias, "Cumulative security for Internet Explorer 10 for Windows 7 Service Pack 1 X 64 systems based on.   Delete this update, or run system restore and it réécrirait where it was before you ran it.  I hope this helps some other poor soul avoid the epic hassle he put me in...

• Slow start even after factory reset

  After significant problems, mainly increasing the response slow time, which no longer responding, slow start, not being not able to uninstall the software and do not restore to any point windows recovery, I performed a factory reset.  I was running Kaspersky, Eset and Malwarebytes - I think that this is the final fall of the computer, but it has never been declared malware that has not been set.

  The problem is, even after the factory reset with NO other programs installed, I'll still have a slow start.  This should not be the case, right?

  I don't know what information you need to help me understand this.

  I am running Windows 7 Home Premium 64 - bit OS

  Dell XPS

  8 GB RAM

  2.1GHZ processor

  Do I need to take for professional diagnosis?

  Hello

  Thanks for choosing Microsoft Community

  Download HD Tune Pro from here and install and test the HARD drive

  If the test result will be put into custody, Contact Dell for HDD replace. I hope that the HARD drive has gone bad

• HP Stream 13: Wifi disappeared completely, even after factory reset.

  Hello

  We had a trouble that started with the laptop does not not on one day. We managed to turn it on, but now there is no wifi.

  In programs and features I see there is a driver Broadcom "installed" but there is no version and there is no file size. I deleted and tried to reinstall a new driver, but that stops at half way through and doesn't seem to work.

  In device manager there is no sign of a wifi device, it's as if it disappeared completely.

  I tried all types of factory reset, same one that completely resets all doesn't seem to work.

  I have no way to connect the laptop to the internet because there is no Ethernet cable port. So I downloaded the driver on a memory stick from another computer and it stuck in the said laptop - no joy.

  Any help would be appreciated.

  Thank you

  Bradley

  @Bradley12345,

  Hello and thanks for the display on the HP support forums.  If you wifi does not appear in Device Manager, that this means that the map does not work or is not connected properly.

  Here is a link to the manual for maintenance of your system.

  HP PC laptop stream 13

  You can use this to see if you can access the wifi card to make sure it is placed correctly.

  If you are not able to do this you want to contact the HP support by phone for repair options.

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Thanks again for posting and have a great day.

• After factory reset, I can not connect my iphone6 with itunes

  After factory reset, I can not connect my iphone6 with itunes

  What happens when you try? You get errors? -AJ

• Droid Razr UI after factory reset is different.

  Hi all

  I was faced with problems similar to this (Gallery crash after update OTA ICS)

  https://forums.Motorola.com/posts/61d8193cf3?start=46&stop=60

  I've been following the thread and did a reset.

  Now, I find that the problem is solved, but the user interface after factory reset is different from the original user interface that comes with

  Update of ICS. I kinda like the previous user interface. I guess it's Motoblur. Is it possible to get that back.

  Thanks in advance.

  ~ Satish.

  
  

• HP ENVY 15 3014 TX - NO SOUND AFTER FACTORY RESET, WON'T ALL THE DRIVERS INSTALLED.

  Hi my name is ali majaz, I recently did a reset on my phone, because there was a sort of Malware or viruses, which froze my device just after startup, so I did a factory reset with HP Recovery Manager, now the problem is that all things are restored, but even after installing the audio driver, the high defination IDT and Intel(r) Audio display the sound does not work, everything seems perfect, AUDIO troubleshooting gives no error, there is no mistake anywhere, even the speaker in the taskbar icon looks exactly as it should be, but when I play anything, there is no sound, games, but I hear nothing, I tried all the tricks in the book , but nothing works, I chose speakers & headphones that my default device, but nothing works, no sound at all, no system sounds, no sound in youtube, I don't know what to do, I tried to install all updates but nothing works, I doubt there is a sort of breach of registry in my machine , but after resetting it should have disappeared, SO if IT YOU PLEASE help me

  LOL OK SO A HAPPY FINALLY ENDING, I DO NOT KNOW HOW, COZ I TRIED SO MANY THINGS, BUT I JUST SWITCHED OFF THE MACHINE AND OPEN THE REAR HOOD, JUST DID A HARD RESET & BAM!  I TURNED ON AND THE SOUND WAS THERE, I DON'T KNOW HOW IT HAPPENED, MYA BE THERE WAS A BAD PROFILE CONNECTS AUDIO SERVICES SO I CHANGED IT BEFORE CLOSING DOWN, WITH NO HOPE IT WILL FIX IT, BUT I GUESS THAT IT IS WHAT SETS THE SOUND, NEVER LESS... IT WORKED... I'M SO HAPPY

• SPA942 not visible to the network after factory reset

  Hello

  A while ago someone at our office a factory reset on one of our Linksys SPA942 phones.  He thought that it worked (it worked flawlessly; but our router has decreased. Great).  The sad thing is, from the factory, it did not work.

  The problem is that no matter what we try - DHCP or static IP - we do not seem to make this device visible on our network. As in, type us its IP address in a browser and do not see the Setup page.

  We have tried everything we can think of.  Subnet mask is correct. Addresses DNS and IP - PBX (for not they should really make a difference) are correct.  I don't see what the problem is.

  Can someone please offer a suggestion, before go me crazy? !!!

  Thank you very much.

  Jarrod

  First of all, thank you for your response. It prompted me to do some play. Here are the results, in case anyone else having a similar problem (a cable by a novice/cheapskate) stumbles across this post...

  We don't have a SPA9000. Simply, we have a Belkin router wired to four points:

  1. downstairs IP - PBX - work

  2. downstairs SPA942 & PC - both work

  3. downstairs SPA942 & PC - both work

  4 floor SPA942 (does not work) & PC (work)

  So... all PC connect perfectly to the Internet and the network, as do both phones down.

  Following the principle of your simple suggestion ("make sure that it is correctly connected to the network") and the first rule of tech support ("is the computer plugged in, sir?"), I decided to reject the hypothesis that the handset was at fault and check if the connection upstairs was to blame (even if the PC we have up there connects very well).

  Bingo! Telephone three works when it is plugged downstairs. Phone two, which worked fine at the bottom, does not work on the floor.

  So now I know what the problem is... but have no idea WHY the problem is. Why don't the floor point network working perfectly for each device I care to plug in - office book server, ATA, fax, you name it - and not for the SPA942?

  I changed all the cables around the router, in order to verify if there was something wrong with a specific port. That has not changed anything. Assume that all router ports are fine.

  So what does this leave... the cable? Seems unlikely, but all other possibilities have been rejected.

  So, I put the phone on the floor downstairs and plugged directly on the router, using another length of cable. Knit then all three phones.

  Look closer to the floor and found wiring that it is three separate lengths of CAT5, joined with connectors RJ45 base (suppose cabler could not to allow/couldn't be bothered buying a cable length).

  Last question... it is likely one of the lengths is a cable cross/patch... that all the devices other than our SPA942 are smart enough to understand this and to compensate accordingly? How the office is wired, it is very tedious and precarious (12 foot ceilings, etc.) to get in there and change the cable lengths, but obviously do so if it is the likely culprit.

  Thanks again,

  JD

• Computer used will not let me activate Windows 8 after factory reset

  Hello!

  I recently bought a used laptop from Samsung. When I got to the computer, he had the previous owners info, photos, etc... So I did a factory reset using Samsungs embedded software. All seemed well, I was working with computer, watching stuff online until I got a message saying that I need to activate Windows. When I tried, it said that "the product key failed. error 0xC004003.

  The computer have some recent work on the motherboard before I bought it. I even tried to activate by phone. Did not work.

  I'm literally just trying to activate the copy of Windows that is installed on this computer. I don't feel like I should buy a new key.

  I would like suggestions.

  Thanks in advance!

  Please see the following article for a possible work around this issue:

  http://dellwindowsreinstallationguide.com/download-Microsoft-Windows-and-Office/Download-Microsoft-Windows/download-Windows-8-1-retail-and-OEM-ISO/

• My gift of the App Store has lost card funds after factory reset

  I had £7.94 left on my Apple gift card but I had to start fresh my phone and now the funds have disappeared. I am on ios on iPhone 6 s 10 and it worked before the update because I factory reset my phone while I was on iOS 10. I have more card is it possible I could get my money on my account because I thought that the funds have been recorded in your account on your phone.

  Your balance is linked to your account, not for a device or its version of iOS (and as you know already software beta cannot be discussed here). Check the account balance and purchase history in iTunes on your computer

• HP ENVY m6-1125dx: Beats Audio In/Out-put pilot missing AFTER Factory Reset/OfficeProgram reinstalling Windows

  Hello

  So about three months ago I had a problem with my HP mouse and browser. both were glitching on screen and does not allow me to type consistently or right-click (to copy, paste, etc.). After seeking help from technology College friends, HP reps (which were not useful since my ch isn't under warranty anymore) and work friends, no one would understand it. I decided to make a setting reset according to which did not help. Then, a factory reset. Finally, it fixed my problem, yay no glitching more! So I contacted Microsoft to reinstall my Microsoft Office. After I have reset a computer and everything was in order, I hung up with them. By attempting to play a video a few moments later, I noticed that my volume is not working. I tried through the Troubleshooting Device Manager (replied 'No audio device found'), by lifting missing audio drivers via the HP Web site (found nothing) and call Microsoft to see what they could do since HP reps no help. So far, no progress is possible except that Microsoft has discovered that he is no longer an audio in/out located on my device. This is absurd! My laptop was purchased 2 years ago for around $500 with award-winning special Beats Audio Sound System. I want to come back. I was forced to resolve the previous question myself and I wa slucky enough to find a way. But now, I am presented with an audio problem I'm afraid that I can't solve in my favor.

  If someone who comes through my investigation has informed business and education with a solution to the please my problem do not hesitate to contact me with your advice and your credentials. I'm willing to try anything at this point, but of course not at the expense of my computer. Experienced responses welcome!

  I hope someone can help me. Manager Microsoft is kind enough and plans to call me again today at 15:00. But, I really don't think there is anything else on our end that we can do. It's all HP to reinstall the audio driver Beats for me once again.

  Thanks in advance.

  Hello

  I do not work for a hardware or software company. Since your machine drivers support site, available for Windows 10, only the drivers that came with your machine (for Windows 8). Driver for Windows 8 above should work as ask you 'pilot missing AFTER factoryreset/windows.

  Kind regards.

• After factory reset is all gone

  I'm selling my Mac Air have done a factory reset and reinstalled the operating system of El Capitan. I just want to be sure I'm sure forgot to sign out of iTunes before performing these operations.

  It is now possible for the new owner to see my browsing history, keeper password etc, or everything is completely erased?

  You must wipe the drive and install the version of Mac OS X that came pre-installed. You can not move from El Capitan to the next owner unless you are willing to provide also your Apple ID and password.

  Make sure that you allow out of your computer in iTunes:

  Exercise

  You can disable allow individual computers, but only using these computers. The only other option is to allow "overall" your iTunes account.

  1. open iTunes on a computer

  2. from the Store menu, choose 'View my account... '. »

  3. sign in with your Apple and the password.

  4. under 'Computer permissions' select ' All of authorize.

  5 allow each computer you have, you might need.

  You can do this twice a year.

  After you 'off to allow all' your computers authorized, re - authorize each of them according to the needs.

  If you have authorized out of all computers and had to do it again, but your year has not elapsed, then contact: Apple - Support - iTunes - contact us.

  For more information on the authorization and permission removal: iTunes Store-Authorize or remove approval from your Mac or PC.

  What to do before you sell or give away your Mac - Apple Support

  
  

  Before you sell or give your Mac before Lion

  Follow the instructions until you get to step 5:

  What to do before you sell or give away your Mac - Apple Support

  When you reach step 5 of the above, you will need your Snow Leopard or earlier installation disc that came with the computer when it was new.

  1. Follow these steps to install the original version of the operating system that came with the computer.

  1. start the computer using the Snow Leopard installation disc or disc 1 that came

  with your computer.  Insert the disc into the optical drive and restart the computer.

  After the ring, press and hold the C"" key.  Release the button when you see

  a small gear appear under the dark gray Apple logo.

  2. once the load setup program select your language and click continue

  button. When the menu bar appears select utility drive in the Utilities menu.

  After disk utility charges select the hard disk entry in the list on the left (mfgr. ID and)

  size of the disk.)  Click the Partition tab in the main window of THE.  Set the number of

  partitions to one (1) from the Partitions of the dropdown menu, click on the Options button

  GUID, click OK, and then select define the Mac OS Extended format type

  (Journaled), then click on the apply button.

  3. when formatting is complete FROM and return to the installer.  Move forward

  with the installation of OS X and follow the instructions included with the installer.

  4. If you plan to sell or to give to your remote computer, then proceed as follows:

  Once you reformat your hard disk and reinstall OS X, the computer restarts with a

  Screen of welcome and you prompt to choose a country or region. If you want to leave

  the Mac in an out-of-box state, do not continue with the configuration of your system. Instead,.

  Press command-Q to stop the Mac. When the new owner turns on the Mac,

  the Setup Wizard will guide them through the configuration process.

• Error ID MOTOBLUR after factory reset

  Hello

  My phone has for the past month, get really laggy so I thought that I would like to format the SD card and do a factory reset.

  When the phone has rebooted, I had to go through the usual configuration of Motoblur.

  He asked for my ID Motoblur (email address) and password so I went to the same email address, I registered here and the same password but the phone came back with the message that the ID did not exist. I tried to retype everything to make sure that I had not bad entered, but it still doesn't work.

  Frustrated I tried to create a new ID using the same email address and password and told me that I couldn't create it because the ID already existed...

  What is going on???

  I jumped the Motoblur configuration for now but would be grateful for the help to resolve it, then I can access to the service, so I paid. I noticed that some other owners also have questions of Motoblur.

  Don't tell me that Motorola has canned the Motoblur service...?

  Could you send me a private message with the IMEI of your phone and the e-mail address used to MotoBlur?

• RNDU2000 problem after factory reset

  Hi all

  A friend of mine gave me his RNDU2000.

  I tried a factory reset. RAIDar find to restart and gave me the choice. I chose XRAID2.

  After several minutes (test drives, intallatation...) device reboot and stuck with these configuration LED: Power On, Bill, 1, 2 flashing.

  RAIDar is more and I had no access to admin frontview.

  I changed hard drives, are doing a factory reset again and got the same results...

  Ping device response.

  Any idea?

  The firmware on the flash has been corrupted, so I put the latest firmware on the flash.