Phone will now connect only via wifi to otherwise the web network does not work
My Motorola xprt is less than 1 week old. At first, that everything worked well. I got internet connection etc. So I connected to my wifi at home and it worked fine, then my wifi secure at work. but now I can't connect to the internet without wifi. There is no 3G signal activity. I tried to help out with a representatitve of Sprint and after trying to make an update to profile 3 times in vain, he recommended I take it into a store and maybe get a new phone. Prior to this, however I tried to solve the problems of the site via a USB connection with the drivers properly installed (I think) and he was not able to detect my camera. Don't I have some settings wrong? I'm going crazy because I like the phone but can not use wifi all the time.
In fact the question on the data connection helped because I went to my settings and the title of the data management 'enabled data' has not been verified, now everything is ok - I have my 3G back. It seems that the Sprint guy should have just over my settings rather than suggesting that I might need a new phone. Thanks again.
I have another question, but I'll start a separate discussion.
Tags: Motorola Phones
Similar Questions
-
Only the left speaker does not work on Satellite A300
Hello
I have a problem with my Toshiba Satellite A300: the left speaker does not work but the right to a good job.
I think that this is not a software problem because reinstalling driver does not solve the problem, and I have the same problem with a Ubuntu live CD, also is not a sound card problem because his work well with a headphones or an external speaker.
The cause is probably a coward of connection between the left speaker and sound card.
Please tell me what to do.
I can fix it without sending the laptop of Toshiba ASP?Hello
If you ask for an opinion, so here's one;
I think that it s speaker malfunction, I doubt that it s a loose connection or something like that and I would not recommend trying to fix this problem yourself.
First of all, know all you n t that's exactly wrong, and second, you will lose your warranty and could damage other parts if you would disassemble the laptop.In this case, the ASP in one and only one good way to solve this problem.
Contact the guy and ask him for the handling of the Fryer!Good luck
-
can't connect to my home internet income james ashley forgot it the link password does not work and the password I was given does not fit into the password box
Are you sure that you do not have to register on this site through the usual way and what you should be used elsewhere on the site?
Have you tried to contact them to help this topic or to check if they have a FAQ on this subject?
I found this in another thread that you created [*]:
I'm not sure do I bought a home income internet james ashley program and I copied the login info I was given and the password does not fit into the window of password and I forgot the link password does not work I sent emails, but do not receive an answer im don't know what to do is anyway you can help me to recover my info or help me change the password?
I assume that you have downloaded and installed this program and need to use this password in this program or only you can use these data to download the program from the site james ashley?
-
Double tap on the web page does not zoom in, only outside.
the zoom feature works only if I use the method of pinching two fingers. the double tap does not work for Zoom.
Could try, after you restart your mobile phone...
or try with Firefox Beta
Zoom options
-
WiFi link for printer EPSON-750 does not work
WiFi link for printer EPSON-750 does not work. In spite of reset the WiFi on the printer and reset the EPSON 750 as default printer on the IMac, the connection between the iMac and the printer does not work
Have you also tried to restart the router?
-
updates installed live mail and now the spell checker does not work
updates installed live mail and now the spell checker does not work
You will find support for Windows Live Mail in this forum: http://windowslivehelp.com/forums.aspx?forumid=b91657c9-9031-4406-a398-7d0783119bb7
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Firefox 6 is a disaster, not only the google toolbar does not work but also yahoo toolbar
I've updated to firefox 6 and now my yahoo toolbar does not work. It was first the google toolbar is not compatible with firefox 5 now the yahoo toolbar does not work HELP?
Check and tell if you are able to solve the problem.
-
Connection problem: The DHCP service does not work.
Original title: connection problem
After got rid of a virus, my computer is always trying to get the network address. I found that the DHCP service does not work on my computer. How can I reinstall. I am running windows xp service pack 3
Hello
Follow these steps and check if they help.
Step 1:
Look for the DHCP Client service and DNS Client Services if they are started.
a. Click Start.
b. click on run and type Services.
c. click right on - run as administrator.Check if the below mentioned services has mentioned State and type start.
Client DHCP started Automatic\Manual.
Client DNS started Automatic\Manual.Also check the dependency that are required for the DHCP Client services and DNS Client Service runs.
To verify that double-click the service, and click the Dependencies tab.
Step 2:
I suggest you to reset TCP/IP settings to solve the problem.
-
of the vista 64-bit now, I changed my OS to Vista 32 bit , now my web cam does not work, tried to get the drivers from dell, but they are not available there. My laptop is studio-1537... Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Hello
I check your firewall settings to see if it can cause a conflict with the season chat software.
Chris
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
I can connect to my home network, but all the other networks do not work... Error window says:
Windows could not connect to the (X)? network name?
[Link] Solve problems
[Link] Learn more about Internet connection problems
I gave security, uninstalled reinstalled wireless - uninstall security firewall reinstall and not go...
Windows 7
Hello
- What network are you trying to connect to?
- You are not able to connect to the Internet?
- Are you able to connect to the other network with wired network?
Try the methods provided and check.Method 1:
Check out the link and follow the steps.
What is network discovery?
http://Windows.Microsoft.com/en-us/Windows7/what-is-network-discoveryMethod 2:
Check out the link and run the troubleshooter.
Windows wireless and wired network connection problems
http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-WindowsMethod 3:
Reset the TCP/IP and check. Check out the link and follow the steps.
How to reset the Protocol Internet (TCP/IP)
http://support.Microsoft.com/kb/299357Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in WindowsMethod 4:Check out the links and check out them. -
The error message "the snipping tool does not work on your computer right now. Restart etc. "comes when I select the Snipping Tool icon. However if I select snipping tool in the menu start nothing happens at all.
Original legislative:
M.
Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.
-
Microsoft has suggestions and offerings to
http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus
-
Moderator Forum Keith has a few suggestions along this line to
-
If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.
-
You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.
-
Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.
`
When you get your system in good working condition, I invite you to back up your system up to an external hard drive and make it regular periodic updates.
-
I hope this helps. Good luck.
-
I try to install the update of PS CS6 can read files camera raw Nikon D800. The exe file fails and says trying to install the application manager. I did it and the update still does not work. Now what?
update by downloading the files directly and then apply them: http://www.adobe.com/downloads/updates/
If this fails, attach a screenshot of the error message if it is in English. otherwise, quote it.
-
HP g7-1320dx - on the numeric keypad does not work and the Num Lock will beep when you press
Today, I noticed that my keypad does not work. The keys / *-+ and 'Enter' works, but the actual number will not.
When I press NUM LOCK, it only beeps and turns the light active or not. And the keys / *-+ and 'Enter' won't work, any more than the actual digital keys.
The regular keyboard numbers and keys all work, it is a simple matter of numeric keypad.
Any ideas?
So I thought that my own problem.
"I went to the "Ease of access" >"mouse settings"> "paved digital use to move the mouse on the screen" and it has disabled."
I hope it helps someone else in the future!
-
Reinstall Windows 7 and now the activation code does not work
I upgraded my PC with an AM2 chip to an i5. I had to reinstall windows and now my activation code does not work. It's like 2-3 years, I forgot when I built the computer. It installed on my other windows 7 install and created the windows.old folder. How can I get reactivated? I used the same code since I built my computer.
Thank youHave you tried to restart by phone?
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-us -
What should I do if, during the installation of my c309a Photosmart Premium printer all in one, which I am trying to install a wireless connection, I get an error message that the wireless radio is not working?
Solved by turning the radio off and then on new wireless.
Maybe you are looking for
-
How can I manage my Windows updates?
Can someone help me understand how to manage the downloads so that I can control when they occur?
-
Windows Media Center Extender for Xbox 360. "Configuration error".
My setup is step 120 failure. I've tried EVERYTHING. There is never a certificate to remove. I disabled my firewall, tried to join a different workgroup. I tried every fix I could find on these forums and forums of windows 7. One thing that I notice
-
How do I unlock the efax account
After various attempts my efax account has been locked to whom should I contact
-
I bought my laptop from well known dealer ab so I know that microsoft is valid but it came not with a then of course hard disk, no disc. I created a bootstick and reinstalled everything on my pc, now it says ian can't valid windows. There is a sticke
-
My laptop Get Stucked Everyday
Hi, I had a small problem and my HP-Compaq presario CQ56-115DX get stucked hourly when I use to watch a few videos on the internet and I did the resumption last week after that recovery came of this problem, I don't know what is the problem. Please c