Photo has been lost

I was in the PAINT and was going to add a small message. but I started having these white lines everywhere. But when I tried to erase all the of them that it was just to much and I went to IMAGE press Cancel. The complete picture was gone! Can I get my picture back?

Check the trash to see if she is there - if it's just restore it and you're back in business.  This and all other options will only work if you have already saved the file.  If this is a new creation that you never saved once again, then I'm afraid it icannot be found because he was never in a file.

If you have Vista Business, Vista Ultimate or Vista Enterprise, you can be lucky.  They have so-called saves shadow copies, which are deleted or modified files that can be recovered in case changes/deletions made by mistake.  http://www.Microsoft.com/Windows/Windows-Vista/features/shadow-copy.aspx more information about how to use this feature to: http://blogs.techrepublic.com.com/howdoi/?p=145.

If you have Vista Basic or Premium of Vista, shadow copies is not available; However, there is an alternative that is free and the shadow copies feature called Shadow Explorer. http://www.howtogeek.com/howto/windows-vista/recover-files-with-shadow-copies-on-any-version-of-windows-vista/.  Although it will not help you this time, it could very well save you in case this happens again.

In case this does not work (not all files are available through shadow - it occurs periodically), here are some additional free recovery programs that might help:

http://www.SnapFiles.com/freeware/system/fwdatarecovery.html (first try Recuva)

http://www.SnapFiles.com/get/DiskDigger.html (try this second - if it does not also the chances of recovery are very slim, but you can try other options.

http://www.SnapFiles.com/get/easusdfr.html

http://www.SnapFiles.com/get/restoration.html

http://www.SnapFiles.com/downloads/Recuva/dlrecuva.html

http://www.SoftPerfect.com/products/FileRecovery/

http://techpaul.WordPress.com/2008/06/23/how-to-recover-your-lost-files/

The files are not really deleted until they are crushed (although they are no longer available through conventional methods).  If you decide to try these recovery programs, you should stop using your drive hard immediately in order not to replace the data that you are trying to recover.  He slave on another PC and launch the recovery of this PC.  Even now you have definitely lost some of them if you use the same PC.  If you can not do this (slave on another PC), you run the risk of overwriting the data with every action you do on the PC (but you may still be able to recover some or most or even all files - it's a matter of luck).

Only you can decide if the data is important enough to take the PC to an expert data recovery to recover files (they will have better programs and hardware to do that none of us do, and I've provided above).  Do NOT go to the Geek Squad or one of these centers of store-, they generally don't know what they are doing - it take for expert data recovery.  It will cost you a little and they generally offer no guarantees.  The decision is yours.

Good luck and I hope this helps!

Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Tags: Windows

Similar Questions

  • Sierra update once the photos has been repaired all of my albums have been removed, videos and all album

    After the update of Sierra once the photos has been repaired all of my albums have been removed from my album of videos from photo library and all, only defalt albums that are there are people, last imported and my photo stream.

    If the videos, Burst, Slow Mo, time, selfies are all gone?

    Please help someone

    Videos are, Burst, Slow Mo, time, selfies albums in the missing sidebar or the content of these missing albums?

    You have a copy backup of the library made just before your Sierra improvement?

  • App Store network connection has been lost because

    MacBook air early 2015 El Capitan 10.11.6

    Regardless of the service providers network, firewall is turned off, I get "we couldn't complete your purchase. Network connection has been lost"message when I try to install any app from App Store.

    Any help appreciated.

    Try resetting the App Store and the deletion of Cookies.

    Reset       Taken from old Toad

  • How to make back to Firefox as it was a few weeks before a large number of features has been lost

    Firefox functioned very well at some point. After several upgrades he lost the feature so much that I need to go back to IE. However, I have added dozens of bookmarks, which are not in IE, so I need to switch back.

    I'm fed up with it now.

    A feature that has been lost:
    1, interactive for weather radar on websites as graphs (but not limited to) weather.com
    2. interactive graphics for graphs of trend of prices on the Google and Yahoo Finance websites
    3. cannot play videos on You Tube and other sites where they have embedded videos.
    4 were not able to right click to download videos on Real Player for a while.

    All of these features are always on IE.

    We will try to correct Real Player Downloader and Flash issues first. Read this article and see if it helps: 11.3 Flash does not load video in Firefox.

  • iPod touch will not got to some Web sites - "Safari cannot open the page because the network connection has been lost."

    Safari refuses to go to certain websites (facebook.com, youtube.com) on my iPod Touch and instead displays this error:

    S afari cannot open the page because the network connection has been lost.

    The bubble at the top where I typed in the URL doesn't change, it always says "facebook.com" or something else.

    No matter where I am, so it won't get fixed by resetting my home Wi - Fi router. Other sites load fine. I have reset the iPod, too, by pressing the sleep button and one on the front (whatever it's called) until I see the apple logo. I also did 'Story clear and data Web site' in the Safari settings.

    I searched the web and found a number of threads that start with similar complaints, but I can't find one where the problem has been resolved in fact.

    Thank you!

    Not "no matter where I am," means, it happens with all networks?

    If so:

    Try:

    -Reset the device iOS. Nothing will be lost

    Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

    ten seconds, until the Apple logo appears.

    -Reset all settings

    Go to settings > general > Reset and tap reset all settings.

    All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

    -Restore from backup. See:

    Restore your device from an iCloud or iTunes backup - Apple Support

    -Restore factory settings/new iOS device.

    If still problem, make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

    Shop Apple Store - Genius Bar

  • I need to replace a series of OS disk not < removed > that the original has been lost, can I get a replcement?

    The disc has been lost? can I get a replacement.

    http://support.Microsoft.com/kb/326246/en-GB

  • How to open encrypted, if the key has been lost in XP?

    I reinstall my Windows xp, but I can not open my encrypted data. My encrypt key has been lost

    There is no backdoor to EFS encryption.  This is why it is so important to backup your encryption certificates when using EFS.  Refer to the following article, paying special attention to the paragraph "why you should back up your certificates"

    "Best Practices for encrypting file system"
      <>http://support.Microsoft.com/kb/223316 >

    That said, if some important remains of your old system must still exist on your hard drive and have not been crushed in your new installation, there are a few programs that widening this information and try to rebuild your key.  Such a program is AEFSDR, but, frankly, it's a long shot at this point.

    HTH,
    JW

  • OfficeJet 6700 Premium: scan of the computer is that is no longer enabled network connection has been lost

    "scan of the computer is no longer active network connection has been lost" appears every 10 minutes or so on my "[redacted] Compaq 8200 Elite Minitour Convertible" is connected to "6700 Premium e-All-in-one Officejet - [redacted] H711n.

    I have already run the 'Locator solutions and update".  He finds nothing.

    I don't know what else to do.

    Please provide the following information if anyone can help including:

    The printer model - done

    Complete and detailed problem description-

    Operating system on the computer (including service pack revision) - done

    Connection method - Direct wireless, wireless, wired LAN, USB? -

    Brand and model of router and modem? -

    Error messages - on the screen of the printer or computer, no matter what flashing light patterns?

    If wireless, in the event of problem, what is the status of the blue wireless light on the printer, active, disabled or flashing? –

    Power off the printer and the router. Power on the router and wait 3 minutes, power on the printer. It connects to the router now? You have a valid IP address?

  • Wallpaper base of Windows Vista has been lost

    My Red Cardinal bird Desktop background has been lost and I want to. I don't know what happened to this wallpaper.

    Hi CU Agent,.

    If this comes to pass, try a restore of the system to a point BEFORE the problem started.  Here is the procedure: http://www.vistax64.com/tutorials/76905-system-restore-how.html.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re-install any software and updates that you have installed and uninstall any software that you have removed between now and the point of restoration, but you can use Windows Update for updates.

    I hope this helps.

    Good luck!

  • "The relationship of trust between the Client and the domain controller has been lost."

    I had a client PC connected to a DC running 2003 SBServer.

    It was this error when he tried to connect with its domain account.

    "The relationship of trust between the Client and the domain controller has been lost."

    I had to connect as Administrator local and leave/re-join the domain with a different machine name.
    How can I fix the side Server?

    Hello

    The question you posted would be better suited to the TechNet community. Please visit the link below and validate the request.

    http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

    Hope this information is useful.

  • A few years back, I bought CS5. because of my house having to repair my CS5 has been lost in the move. Then I had to take care of my mother who died later of cancer. I have now found my product, but the customer service person said that there is no newspa

    A few years back, I bought CS5. because of my house having to repair my Adobe CS5 has been lost in the move.  Then I had to take care of my mother who died later of cancer.  I have now found my product but the person said the customer service there is no newspaper of me purchase of the product.  I can't use the product that I bought because I don't have the registration code.  So could I please get a refund and I will return the edition teachers and students of CS5.  Thank you.

    @

    Quickly find your serial number

    Download the CS5 products

  • CS6 does not appear on my Adobe account.  If my registration has been lost?

    CS6 does not appear on my Adobe account.  If my registration has been lost?

    Make sure you use the same adobe id to your account adobe ID used to register your software.  In addition, you should have a copy of your serial number fixed locally.  and, for convenience, you should have a copy of your installation files,

    Downloads available:

    Download and installation help links Adobe

    Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  • control file has been lost no control backup file avilable in db

    Hello

    Control file has been lost no avilable to control file backup in the database how to recover the control file and recover the database.

    Hello

    If you have backup controlfile to trace, then you can follow the action plan below

    1)
    SQL > startup nomount
    SQL > execute script
    SQL > restore database using backup controlfile;
    sqL. ALTER database open resetlogs;

    Note: datafile header SNA will be stamped to controlfile one

    If no backup of the file available trace control, then perform the Ridge below the action plan

    Any other database
    sqL > ALTER DATABASE BACKUP CONTROLFILE TO trace;
    SQL > show dump

    check in udump

    now, you must modify the controlfile and do file parameter etc... You can use alerts to the same log

    SQL > execute script
    SQL > restore database using backup controlfile;
    sqL. ALTER database open resetlogs;

    You can check the link below also

    http://it.Toolbox.com/blogs/database-solutions/create-backup-controlfile-for-scripting-recovery-12133

    Hope that I have answered your question

    Kind regards
    Rakesh jayappa

  • The connection to the remote host has been lost.

    Seriously, almost every time I save a file and try to download it I get this error:

    The connection to the remote host has been lost. Click Refresh to reconnect.

    So I have to start again to download the file again... but no, I get this error again... until about 7 times then it will finally through. After that happening by once I have on a window of 2 minutes where I can download files without errors... then the cycle continues.

    This is driving me CRAZY! It happened for about 2 weeks. I have not recently changed all the server info. I used to download files on the same server from dreamweaver all the time with ease. My partner with the same configuration works always with ease. So why am I having so much trouble?

    I often have to troubleshoot PHP where I upload to the server to run it to see if it works, and I could have several times to download a file in the few minutes that becomes incredibly tedious task with this ongoing issue.

    Someone please help.

    Thank you!

    P.S. I'm using CS3.

    Ah ha! I finally got to work properly!

    Your site-> Site-> Remote Info Manager, try to check the passive FTP box and see if it works.

  • FRM-92100: your connection to the server has been lost

    Dear all,

    Please note that I am not able to run at the request of a particular State:

    The coming of the error is FRM-92100: your connection to the server has been lost

    where as another user is able to take this particular report.

    Our DBA had tried to apply the ATG RUP7 patch on a same server different mount point.

    Would this had created problems... ?

    Please update...

    Thanks in advance...

    Hello

    where as another user is able to take this particular report

    Run the report for the connection of users who have problems of client computer users who are not having questions and check.

    Concerning

Maybe you are looking for

  • HP 15 laptop: atheros wifi causes extremely high latency peaks

    Windows 10 has been the only OS I have used, so I can't speak for others... I noticed that (initially copying files via wifi lan has shown) using wifi really totrures my laptop... it's worse than if the CPU is 100% responsible...  I've updated either

  • To try the beta of Windows Server '8 '.

    Hello I am (I am doing everything) two small nonprofits who is both very computerized in their demand for services.  My vision that their development involves the inevitable expansion in technology database server.  I'm still very much in the learnin

  • HP Pavilion 15-p225na: product number Unknow Driver Hp Pavilion 15-p225na ACPI\HPQ6007: M3H44EA #ABU Please HELP! =(

    Hi I have a problem with a missing driver for something on my laptop, it just says: Unknow driver in Device Manager, the hardware id is ACPI\HPQ6007 and my laptop model number etc. is the product number Hp Pavilion 15-p225na: M3H44EA #ABU Please HELP

  • REFERENCE DELL 2335 MFP SCAN "NOT AVAILABLE".

    I have a Dell 2335 MFP printer that is connected to a network with 3 2 pc from work of the pc quite well and we can however scan other pc which is configured in the same way is not when to choose the pc that you want to scan to it says connection aft

  • PPTP VPN on C2821 - no access on remote hosts

    Hello, I'm having a problem with a PPTP VPN on a C2821 router running, I can connect to the server and ping the LAN interface but I get no response from any other host in the network. The network looks like this: h_net.PNG Thank you for the help and