"Photographs not in the albums (according to my records) at Revel after that access of all media" fact TICK - sorting Adobe!

Similar Questions

• all of my photos in icloud were removed from the restoration (and did not find the album recently removed to icloud)

  
  

  
  

  all of my photos in icloud were removed from the restoration (and did not find the album recently removed to icloud)

  The opposite happened to me - in the opposite direction! I found all my pictures from Nokia mobile in icloud on my iPad a few days ago, had no blue cogwheels devices! The two devices + home phone is all about wireless internet of the contract with ORANGE in Europe! They will not help,

  I think my router - put in place by an expatriate for me - is hacked because of the problem. I didn't ask him to change my contract or warn of my move when I did 2 years ago - but he went ahead and made Orange disclose no information telling me his "confidential".

• I've just updated my LR, but still can not read the new RAW files of my brand new Sony a6300. said 'impossible to read these files' is Adobe should update it program with new firmware to manage these new folders? Or something escapes me?

  I've just updated my LR, but still can not read the new RAW files of my brand new Sony a6300. said 'impossible to read these files' is Adobe should update it program with new firmware to manage these new folders? Or something escapes me?

  You updated Lightroom to version 6.5? This is the version you need. What is the exact wording of the message you receive?

• I just downloaded Creative Suite 6 on my new MacBook and not only the interface seems a bit different but I noticed that the oil paint filter is not available.  I used the same discs on my office iMac and the filter still works there.

  I just downloaded Creative Suite 6 on my new MacBook and not only the interface seems a bit different but I noticed that the oil paint filter is not available.  I used the same discs on my office iMac and the filter still works there.  I use it often and would appreciate any help to recover!

  Please download and install Photoshop CS6 from the following link: download Creative Suite 6 applications

• I have purcashed Adobe Acrobat Pro DC, but he says that I not meed the minimum system requirements. What should I do? Can I download a lower version of Adobe Acrobat Pro DC?

  I have purcashed Adobe Acrobat Pro DC, but he says that I not meed the minimum system requirements. What should I do? Can I download a lower version of Adobe Acrobat Pro DC ?

  I am able to install it well just a min ago. This time of I have launch the folder to select 'Configuration' instead open it directly after installation & works now. Thank you very much.

• can not find the album on ipod

  I have an ipod nano and ripped an album from a CD.  I can't find the album or one of the songs on the ipod, but they appear when I connect it to a PC or a Tablet

  but they appear when I connect it to a PC or a Tablet

  You are looking at the content of the iPodas shown in iTunes on the computer When you select iPod in the iTunes window?  Or do you mean that the album appears in your library iTunes music, but not on your iPod?

• Media Player 11 install new music Import does not recognize the album - only songs?

  I recently had my laptop reimagee (XP Pro). I copied the MyMusic folder under my documents. Then installed WMP 11 and he started upward. It has imported all the songs, but nothing appears in the views of the artist or Album except a unknown album with all the songs.

  I got so far without resolving the question of the measures:

  • Removed the program using Add/Remove, then reinstalled WMP 11
  • Delete the database files in %userprofile%\Local Settings\Application Data\Microsoft\Media Player and restarted WMP11. Same happes: songs are added, but not the album or artist information

  What now? iTunes has been installed properly recognized all albums/artists (just saying...), but prefer OMP

  Thank you

  smawsky, have you tried to reset the library with the instructions I mentioned in one of my previous answers? Attention to my note on the WMP network sharing Service.

  If you copy a few of these tracks from the disc in the folder external HARD music in My Documents, WMP reads the tags of the files copied? And what about the sample music files which are added to the default library?

  Tim Baets
  http://www.BM-productions.TK

• Xbox Music does not see the albums recently added to the library

  There are two problems here.

  first of all, I have 43 albums in my collection, stored locally. I disable the synchronization of clouds and Pass music downloads so all I see are the titles stored in my music library. I added more than 12 albums but the app does not.

  In desktop mode when the music library is organized by the record, I can see the albums that I've recently added. When I change reorganize it by album, I do not see the recently added albums. ID3 tags are blank.

  It seems that the index is never updated when you use the method of editing an SD card. It did not matter if the mounting location was at the root or in C:\Users\...  I had to manually rebuild the index of any time, I wanted the libraries up-to-date. However, I found another method that seems to work. The following you web site shows how to set up points of junction which connect the files on an SD card with virtual locations on drive C:. The end result is almost identical and indexing seems to stay up to date in real time.

  http://www.Engadget.com/2012/11/01/junction-points-and-Windows-8/

• Note from the Album setting

  I have a few albums that have somehow got evaluated in itunes. Is to apply ratings for screwing my playlists and songs. I had this problem in earlier versions of itunes, and you can switch to the display of the album and the album unrate. Boring, but the problem is solved.

  I don't see the sides of the album in the album view in this version of iTunes.

  I found that you can add a column for the rating of the album version of the song. From there, I can see how is assessed to the album, but I can't pay the Bill of this album (or any album.) I click on the field to adjust the stars, but nothing happens.

  It's as if the service was half removed but is still there. In addition to the removal of the itunes library and restarting someone has suggestions on how to fix?

  Thank you

  In the songs view select work and adjust the column width of work if necessary to indicate the side of the album alongside the album art. This control is editable.

  TT2

• can not get the printer to work when sending my laptop computer that he used to work the printer is on and functional

  Can't get printer to work when sending my laptop computer that he used to work the printer is on and functional. Canon pixma MP180

  Hi NickManchisi

   

  1. for how long have you been faced with this problem?
  2. what happens when you try to print?
  3. do you receive any error messages?

  Method 1 :
  Please refer to the below mentioned article and check if the given steps help.

  http://support.Microsoft.com/kb/308028

  
  Method 2:

  You can even perform a restore of the system to a previous point, when the issue was not present. The System Restore tool uses points of restore to return the system files and settings to an earlier point in time. You can use it to restore the operating system to a point in time when you have not experienced the problem.

   

  Note: When you use System restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To do this, there must be a restore point from the system in which the connection was successful.

  Refer to the following help link on performing a system restore.
  http://support.Microsoft.com/kb/306084

   

  I hope this helps.

• "Do not put the laptop near devices such as TV speakers/fridge that generates a strong magnetic field" what is the effect of this?

  Original title: do not put the laptopn close device suas: a fridge that generates a strong magnetic field of the speakers on the TV? What is the effect of the magnetic field, causing the laptop?

  Do not put the laptopn close device suas: a fridge that generates a strong magnetic field of the speakers on the TV? What is the effect of the magnetic field, causing the laptop?

  Hi stuckfree,

  Magnets are used in computers for various purposes, for example in the hard drives. Several parts of a laptop computer may be affected by a magnet. More commonly known as material element affected by magnets is the hard drive.

  That is not exactly true. Hard drives are well protected against most of magnetism, and most even use a magnet to turn, but many strong magnets and electromagnets can and will damage a hard drive. More likely to be affected is the BIOS of your computer (Input\Output base system) ROM, which shows how to use the basic components and boot into the operating system to your motherboard.

  So it's best to avoid placing computers\laptops close to all these devices.

• I am the owner of everything on my pc I do not have the special permissions for individual files and I am denied access

  permissions of origin title: special

  I am the owner of everything on my pc I don't have special permissions for some individual files that I find quite strange. It also means that I can't delete some files. I tried to access the files when I started from a different hard drive, but still can not remove. While I followed all procedures to address this issue, I still do not end with special permissions. Is it possible to modify or delete the files from the MS DOS window or is there something that I am missing. I also found it seems to be an 'unknown user' in the permissions area, and when I try to delete or change this 'unknown user' and a second show. 1 then said who is denied access, but the other has access. No matter what I have I can not get rid of it! And file sharing is disabled disabled! Help, please

  In Vista, many files can not even to administrators. Some are to protect the user from making mistakes (like many in the Windows directory and in your personal profile).  Some are points of junctionhttp://msdn.microsoft.com/en-us/library/bb968829 (VS.85) .aspx which are there for backwards compatibility and should not be modified in any way (and certainly not deleted) or you may not be able to use your programs or may even damage the system to the point where it will need to be reinstalled).  You shouldn't need special permits to delete a file if you have all the rights, but special permissions can block access and that's sometimes how it blocks even administrators.  Keep in mind that XP administrators had access more than them in Vista - blocked is not necessarily a problem, but intentionally by developers of Vista.

  However, if you're talking about files that you devriez have permission, then the following information about the ownership and permissions can help you.

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have:http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista:http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/. To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article:http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To solve this problem with folders, folders takeownership or the reader (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  Here is more information on the ownership of a file or a folder:http://www.vistax64.com/tutorials/67717-take-ownership-file.html. To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article:http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  I hope this helps.  If this isn't the case, after return and we'll get the exact path of these files to make sure that you really can visit his profile and try adding special permissions.  I suspect that the problem is that everyone is denied access and blocking everyone - but we'll check (if necessary).

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Connection status: unknown, the dependency service or group could be started. __Windows could not start the DHCP Client service on Local computer. Error 5:Access is denied.

  Good evening!

  About 2 days ago my laptop not able to connect to the internet with wireless on, a brand of red x on the computer icon in the bottom right. When I hover the mouse over this icon, it shows ' connection status: unknown, the dependency service or group could be started. " I check services and found DHCP stopped running, I tried to start it manually, it shows "Windows didn't start the DHCP Client service on Local computer." Error 5:Access is denied. "I did ' sfc/scannow' and found no errors.
  I use a laptop from my friend and it works great! So there is nothing wrong with the router but my own laptop. My laptop runs windows Vista editions Home Premium with Service Pack 2.

  Need help! Please, need to connect to the internet to go to school online. Thanks in advance for any help!

  Very respectfully,.
  Jay2010

  Hello
  Failed to start the Service on the local computer's DHCP Client (applies as well to Vista)
  http://WindowsXP.MVPs.org/DHCP.htm

  ----------------------------------------

  Start - type in the search box-> find CMD top - right on - click RUN AS ADMIN

  You can copy and paste this command, and then press enter

  netsh winsock reset catalog

  ======================

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ----------------------------------------

  Try setting all Windows services on their default values.

  Start - type in the search box-> find Services at top - right click - RUN AS ADMIN

  Vista default services
  http://www.blackviper.com/WinVista/servicecfg.htm

  ---------------------------------------

  Actually try updating your driver: (use a wire or download on another computer and transfer via)
  removable media)

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------

  You can get more help in these forums.
  http://social.technet.Microsoft.com/forums/en/category/windowsvistaitpro

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Dynamic action does not not on the first attempt to load page. Work after refreshing the page

  4.2.1

  Hello

  I have a page with a list of selection Order_id and a display _item Product_name.  There is action dynamic PL/SQL that fills the element displayed when the order_id is changed. The problem is that when I opened the page for the first time, if I change the select order_id list, nothing happens. But if I refresh the page once, and then it starts work and the display_item is filled.

  No idea what could be the problem?

  Thank you

  Ryan

  ryansun wrote:

  On a more serious note,.

  1 when you load the page for the first time and try selecting the order_id, nothing don't be past, try refreshing the page once and you will see the option to display with the null value. What I do is. I have two tables

  Orders

  1

  2

  3

  Products

  1A

  2B

  2 Z

  3 C

  When I select the command 1, then since there is only one line of products, the displayed item will indicate A populous. If I select 2, since there are two product lines, I should see the list box.

  Doesn't seem to work and I'm sure, I'm doing something wrong.

  Difficult to be certain that as it appears that someone has been editing the page before you start watching (rather than copy the page experience their own copy). Your article P1_PRODUCT_NAME_DISPLAY he a point value / Expression 1 column = Expression 2 condition P1_HIDE_SHOW = 1 condition on that? Or any other condition of rendering?

  These conditions do not match the dynamic actions. They are applied only during the page see the transformation when the page is displayed first; When it is linked to another page; or after a branch to him. They are not applied dynamically during the activity of the user on the page. In this case, that the status is set to false when the page is rendered first, the same element does not exist in the page sent to the browser. If you want these items to appear conditionally because of the interaction with another user control, then you must initially return the elements and control their visibility using hide/show the dynamic actions.

• My computer keeps giving me the blue screen of death... even after that I reinstalled the operating system

  I have an emachines W3644... it came originally with windows xp family, but I currently have windows xp pro installed. It worked great for 4 months, no problems or anything. I got it sitting speakers... speakers were not connected or hung. I don't know if this could hit anything or not? My computer has 1.37 GB of RAM and the graphics card is a NVIDIA GeForce 6100 nForce 405.

  Questions are... Well, he keeps just randomly bluescreening. There isn't really a reason as that why, I'm the only person using this desktop computer, and I really did something to do that. I have scanned with many different scanners, and they found simple things like false positives and tracking cookies, none of which is a big deal.

  I tried many things to fix this myself... but nothing has worked. I'm starting to wonder if it's something to do with the material?

  I tried many things... include system restore, using the last known settings who worked, and also something to do with the domain controllers, or whatever.

  No one has solved the problem. He continues to randomly bluescreen. Also, a few times I clicked on records and he told me that they were corrupt, and when I right click on them and click Properties, it says that this folder contains 0 bytes of data... when there is more than 1 GB of stuff in there. This is the folder where I put my icons of computer maintenance and other things in.

  Then I'll reboot it'll randomly blue screen while windows is loading, he'll also do to the logon screen and sometimes even after connection... sometimes I it will load everything very well and it'll be on the desktop and I will leave the room and return, and it will be on the blue screen.

  I'm not sure what to do at this point. I reinstalled windows... and he still bluescreens. I copied most of the error codes he gave me... If someone could tell me please what they mean, or be of any help that would be great. I tried a lot of things... even reinstall... and he still continues to bluescreen. I also unplugged then replugged... all that does not work either. I also tried in safe mode, even in safe mode it bluescreens, sometimes even during loading safe mode.

  Anyway... Let me just enumerate all the error messages I've written... Please look at and if you know what NONE of them speaks, please let me know. I just want to know what his question is... so I can hopefully do this fix, or at least get another or something.

  Here are the error codes I wrote last week.

  STOP: 0X0000008E (0XC0000005, 0 X 00000322, AA4D7C68, 0X00000000)

  It mentions something about my bios if I remember correctly...

  STOP: 0X0000008E (0 x 0000005, 0XC0000005, 0XBF8A58CB, 0XA84EE96C, 0x00000000) win32k.sys-address BF8A58CB base at BF800000, DateStamp 4a8564c7

  STOP: 0X0000008E (0 X 80000004, 0X8165CE81, 0XAF311B38, 0X00000000)

  STOP: 0X0000008E (0XC0000005, 0X805656DE, 0XB7AC9770, 0X00000000)

  BAD_POOL_Header STOP: 0 x 00000019 (0x00000020, 0XE210A998, 0XE210AA38, 0X0C14020D)

  DRIVER_IRQL_NOT_LESS_OR_EQUAL STOP: 0X000000D1 (0X0001000C, 0 x 0, 00000002 00000000, 0X8A2D2700) wmaud.sys - address 8A2D2700 base at 8A2D2000, DateStamp 48025c3e

  STOP 0X0000008E (0XC0000005, 0X80564BB5, 0XA90F0C80, 0X00000000)

  PAGE_FAULT_IN_NONPAGED_AREA STOP: 0 X 00000050 (0 X 80898298, 0X00000000, 0X00000001, 0X8054BBB4)

  The BIOS in this system is not fully compliant ACPI STOP: 0X000000A5 (0 x 00000011, 0 X 00000007, 0XF771F180, 0 X 03000000)

  PAGE_FAULT_IN_NONPAGED_AREA STOP: 0 X 00000050 (0XBC99E00C, 0X00000002, 0X00000001, 0XAC9A203C)

  STOP: 0X0000007E (0XC0000005, 0 X 00002300, 0XB85E29F4, 0XB85E26F0)

  STOP: 0X0000008E (0XC0000005, 0X805454F3, 0XB9359B5C, 0X00000000)

  It's all the ones I copied. I tried to reinstall and still get errors. Please, someone tell me what these codes mean as soon as POSSIBLE.

  Thank you.

  If the RAM is only four months and you have identified that it is at the origin of the problems (e.g. the BSOD happen when only a single module of RAM is in) and then even after four months it can always happen.  Things such as ESD (Electro Static Discharge) or plug the RAM while it is still on the motherboard can cause these problems to happen... but they may or may not happen immediately.  The RAM could be faulty from the beginning, but has only gotten worse.  But unfortunately there is nothing that can make it work, if it is faulty, then it has to go back for a refund/replacement - as boring (and believe me, I know) that it is.

  0X000000BE normally concerns pilots in regards to the 0 x 00000050 - this normally either bad RAM, video memory, and bad devices (although not very likely) or bad memory Cache L2 (did not have a lot of people), but it can also be bad device driver software.

  I wish that the BSOD errors are actually more accurate as to describe what is at the root of the problem but they are not, and most of the time, it is by a process of elimination that we can solve the problems. However, I would say that if your original RAM works in the machine and you get only BSOD when the new RAM is in, then the new RAM is the culprit.

  Here's a little info on the RAM and it does: http://www.technologybasics.co.uk/WhatIsRAMAndWhatDoesItDo.html

  I hope I covered everything, but other questions, do not hesitate to ask :)

  --> I hope this helps! Please mark it as correct answer or vote if it does :)<>

  http://www.pcuk.biz - my Web site | http://www.systems-and-solutions.co.uk - where I work

  
  Info from Microsoft about phishing . Information from Microsoft on the fake security software