Photon: 4 G/WiFi error after update

He broke my phone... I can no longer turn on 4G or the wireless. I found this 5-minute installation of the update.

I haven't played with the phone just to see if he is fell in what anyone else. I press the buttons, or icons on the screen to activate these, and they do nothing. I can hold on the icon and it will allow you to move them if.

Is it possible to uninstall this update?


Tags: Motorola Phones

Similar Questions

  • WiFi ERROR after update

    Hello everyone

    I'm not a resident of the United States and I bought this amazing phone I use the card Sim from Cellcom Israel

    I just see the update, the update firmware, run smooth but after reboot I try was to turn on the Wifi

    and we get an ERROR.

    Try to charge the phone - wifi doesn't work do not

    Try had to pull out of the pile and restartin - wifi doesn't work do not

    the only thing that works is when I restart the phone in AIRPLANE MODE the wifi works

    but as soon as I activate the AIRPLANE MODE off the coast of the wifi disconnected and cannot light up to turn back the AIRPLANE MODE again.

    I'm not using any data connection plan I do not have...

    Try'd factory reset - wifi doesn't work do not

    What can I do?


  • HP Pavilion Notebook - 15-p206: WiFi lost after updating the BIOS of HP Pavilion Notebook - 15-p206tx on windows 10

    Hello

    WiFi lost after updating the BIOS of HP Pavilion Notebook - 15-p206tx on windows 10.

    Update driver BIOS update effective system is rebooted and the wifi does not.

    Please help me.

    In the box to Ask Me whatever it is next to the Windows icon, type in "Installed updates", and then click view installed updates.

    Select the update that is dated from when you had the question.

    Click it to uninstall.

    You have to restart the laptop afterwards.

  • WiFi problem after update of lollipop

    Is anyone having problems with their wifi connection after updating to the pacifier. Mine was working fine before the update. A move 35mbps ookla speed test download when connected to my home fibre broadband before the update, but now even hit 1mbps after update. Keep buffering when watching videos. Home broadband Checked speed on pc and getting 34mbps so it's not my Internet problem. Would appreciate ideas. Thanks.Using xperia D6603 z3.

    That's what I'll do, fix the phone with PCC

    PC Companion (CCP)

    Bridge (for Mac)

    Alternatives on how to backup Xperias

    http://talk.sonymobile.com/thread/36355

    and uninstall any antivirus > check again.

  • WiFi problem after updating iOS 9.3

    Your Wifi stop working on the iPhone 5 after update of iOS 9.3?

    My WiFi is fine

    To solve problems

    Settings - general - reset - reset the network settings

    (You have to re entry will save WiFi password)

  • I get 80244o1c error after updated windows update

    I recently used the reformat windows 8 setting, "all remove and reinstall windows.

    I have had no problems or issues with the process until I've decided to use windows update to install the necessary updates.

    Update Windows prompted me to upgrade to the latest version. I then downloaded and installed the update and it told me that windows update will automatically close and open again. After the update I went and go to check updates. I filled the boxes updates, I want to install the first. I have install updated partially because I don't have the best internet speed to download all updates at once. But after installing the updates I get only error 8024401c. I tried to use the Troubleshoot utility and restart the computer when you are finished, but I still get the error. I tried all of the solutions in this link http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_update/windows-update-error-code-8024401c/f8b9dc5f-a512-4e74-b41c-d357ca40f9f7. But still nothing.

    Help, please.

    P.S

    I also tried to reset (delete everything and reinstall windows) several times and the recovery of a option restore point until I started the update from windows update. But still no luck.

    Hi Justin,

    Thanks for posting your query on the Microsoft Community.

    I appreciate your troubleshooting steps.

    As you said you get a 8024401C error after installing Windows updates.

    I need some information.

    1. What is the brand and model of your computer?
    2. Do you remember the numbers KB installed updates?
    3. What happened when you performed the reset and restore? Do you have an error code or message?

    I suggest you to please provide us with the number of the last update that you have installed on your computer.

    See the link given below to find the number of the update through view update history. Please refer to the appropriate section (how can I find out what updates have been installed).

    http://Windows.Microsoft.com/en-us/Windows-8/Windows-Update-FAQ

    Try the methods.

    Method 1:

    As you have already tried to reinstall your Windows, I still once suggest to run the system update tool as system update scan tool corrects errors of Windows Update in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008.

    See the link below for the procedure:
    http://support.Microsoft.com/kb/947821

    Method 2:

    You can read the following article and try to reset the Windows Update components and check.

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

    Warning: This section, method, or task contains steps that tells you how to change the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    322756 (http://support.microsoft.com/kb/322756/ )

    How to back up and restore the registry in Windows

    I hope this helps. Please let us know the results. We will be happy to help you further.

  • Can help to solve the issue of "the application could not start properly? < < Error after update CC

    After update Adobe after effects Adobe first Pro CC and CC, via the cloud to create, update, I get the following programs during the boot error message.

    Box "application error".

    "The application could not start correctly (0xc0000142). Click OK to close the application. »

    I had several programs that I've updated (Adobe PhotoShop, Adobe Audition, etc.), at the same time. None of the other programs seems to have problems starting.


    I uninstalled Adobe after effects Adobe Premiere Pro CC and CC and have the same results, aka, error notice, after reinstalling.


    I did some research and do not seem to have found a definitive solution to the problem.


    • Can you please help me solve this problem. If you have encountered this problem and it is successfully resolved your entry is particularly useful.
    • Can you suggest ways to avoid this, or similar questions in the future. It makes me feel very reluctant to update my software CC if I'm going to experience the hours/days/weeks of delay due to having to solve problems.


    Thanks in advance for your help.

    Hi Leslie,.

    After update Adobe after effects Adobe first Pro CC and CC, via the cloud to create, update, I get the following programs during the boot error message.

    Box "application error".

    "The application could not start correctly (0xc0000142). Click OK to close the application. »

    Update for Premiere Pro CC 2015 (9.2) for a fix.

    Thank you
    Kevin

  • Error after update DPS v26

    Hello.  We are users of woodwing, after update of DPS v26, we have this error

    Error: The plugin Adobe Digital Publishing (v8.0.0.26) doesn't have the minimum required version number (v8.0.0.370).

    We had to reinstall the latest version (v25) of DPS, so we can work

    Anyone knows why is this error?

    Thank you

    Hi dlnoblanco,

    If you have not already, you can get a Connection of WoodWing's Smart update which should fix this.

    The update is called: Smart Connection v8.2.0 build 65.

  • DreamWeaver CS3 license error after update creative cloud

    So I was probably the last exclusion still using Dreamweaver CS3. After updating today CC made by hand with Adobe technicians by phone, they appear to have crashed the program with Dreamweaver CC. Required me.

    Windows

    When I try to launch DW CS3 I get a message saying "you cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contact your COMPUTER administrator or Adobe customer support for assistance. ».  Adobe customer service sent me here... anyone has a clue as to how to go back to Dreamweaver CS3?

    Windows 7 Pro on a HP Elibtebook p 8570

    plasticsdesign wrote:

    So I was probably the last exclusion still using Dreamweaver CS3. After updating today CC made by hand with Adobe technicians by phone, they appear to have crashed the program with Dreamweaver CC. Required me.

    As has been done by technicians from Adobe, you obviously have a paid support plan. It would be best if you contacted them to fix this.

    The only solution I have is to uninstall and reinstall.

  • Error after update CC 2014-1015

    Hello I use the application package to teams with device management.

    After updating my CC 2014 2015 applications, they have all entered into trial. Group management appliances are only activated, however the desktop user is like trial version for 30 days.

    How can I fix?

    Thank you.

    Hello

    See:-https://helpx.adobe.com/manage-account-membership/cc-reverts-to-trial.html

    I hope this helps.

  • HP model #A6000n Bios Checksum error after update Bios!

    I did update the Bios posted on the Hp website... After the reboot, all I get is this error, "BIOS Checksum Error", the black screen then looks for a boot diskette drive (this computer has not), then it looks for a boot on the CD drive disc.  Now, I talked to HP support and they say I have to order the recovery disks.  Someone can send me a bootable file that I could burn it to a CD for this model machine and get it operational?  I have an older machine here that would allow me to make a bootable CD, but I have no idea where to find some sort of update of the BIOS and or file bootable to Flash the BIOS.  I am so angry that HP wanted me to buy this CD recovery program has just returned in Windows Vista.  But, I don't know what to do because the update of the BIOS must have been corrupted when I flashed the motherboard ASUS.  This computer is my aunts and she failed to save restore disks and now I'm lost as to lift this thing up and running... Help, please!

    Thank you!

    As I said, if you have a floppy is easy, especially since the computer diskette is XP. OK, let's go.

    (1) place the disk in the drive

    (2) open my computer and right-click on the floppy drive

    (3) choose the format on the menu that appears

    (4) put a check mark in the box "create an MS-DOS startup disk".

    5) click on 'start '.

    When 6) filled the awdflash.exe on the diskette copy

    (7) right click on the file of BIOS from HP

    (8) to move the mouse cursor in 7 - zip and click "open archives".

    (9) double click on the folder icon in the new window

    (10) right click on the ROM file - in this case 513. ROM

    (11) choose "copy to" from the menu and browse it on the floppy

    (12) when it is completed, the disk should be ready to work

    (13) move the floppy drive cable and the Ribbon in the Vista computer.  He didn't need to be mounted, but make sure that it does not touch something metal (participation of books will be good) and connect the water and the power supply to the motherboard and the power of the Vista computer (of course, it is done with both computers turned off and unplugged)

    Now ready to go on the Vista computer. When you press the power button on the computer, there will be a splash of HP come screen upward.  From this screen, press her "enter the BIOS' or 'Boot to install' as shown.  I forgot to ask if this screen appears in the previous posts.  If this screen does not appear then it will be much more difficult.

    When in the BIOS, look for boot order and then set it can boot from the floppy first.  Save the selection to get out.

    (14) reboot - should end up with a cursor blinking in the upper right

    (15) type AWDFLASH 513 rom/py/sn/cc , and then press ENTER.

    (16) when and if he finished power down and remove the drive from the computer disk

    That should do it.  If this does not work or there are problems come back with an explanation of what was happening.

    Of course, to do this at your own risk.  I'm just trying to help.


  • Aspire V3 - 772G wifi issues after update win10

    Hello!

    Unfortunately problems with wifi cell phone after last win10 update, not completely broken but work very unconsistent.

    It's works well at home, although it seems that depending on where you are and what networks that are around you, IE to sometimes work when starting the computer it work, but the menu wifi crashes when you try to change the network, "connecting" forever, and then eventually crashes and the menu are all networks at all. Sometimes at startup it as today he shows not all networks at all without doing anything.

    Info:

    -updated for win8.1--> win 10 home

    -Qualcomm, Atheros AR5BWB222 Wireless Network adapt

    -version of the driver 3.0.2.182

    Update the driver Atheros felt like the natural end to start to check, but even though this model is on the list of the win10 from Acer support, no wireless/atheros driver for windows 10 is available when searching on the dirver for Acer download section. Found nothing also when you search for updates in the Device Manager. I hope and guess win10 is now one year old, the driver is supposed to be beautiful and there's nothing Acer "forgot" to do? Anyone know?

    Have you tried running File Checker Windows system, no problems which are not. The unoffical atheros site - drivers.com claim to have a 'new' pilot win10 for my model, but not really my cup of tea to mess with unoffical drivers, it really shouldn't be necessary.

    After searching the Web, I saw all kinds of variations of symptom of wifi-questions about win10 updates, a bit similar to mine but with very different solutions. Really a mess for the "average user" to know where to start troubleshooting unfortunately.

    Anyone with experience of a similar problem? Have a fine system of win8.1 image to roll back that as a last resort, if I can't sort out, but it would be a shame. :-(

    Thanks for the input!

    No matter when I have a driver like that, problem I open the Device Manager, go to the device and uninstall/remove the drive from the device. Then restart and let the system see the drive automatically.

    With the pilot WiFi which can be more difficult. Can you connect directly to your router for a network connection? (a decent connector 10/100/USB 2.0 is under $12 on Amazon, $15 for a USB 3.0 10/100/1000. )

  • Status.msi error after update of the HP - Vista printer software download

    Everything worked well and then I downloaded an update from the HP printer software there is, through the application of updated HP and immediately after that I started having a few nights the following error message:

    "The feature you are trying to use is on a network unavailable resource.  Click OK to try again or enter a different path to the folder containing the installation package "status.msi" in the box below. »

    In the "source of use:" drop-down list there, "C:\Users\Bob\AppData\Local\Temp\7zS73BD\setup\status."

    If I click on 'OK' it appears that the same error message.  If I click on 'Cancel' and then I get the error message following popup "an installation package for the product to the State cannot be found."  Try installation again using a valid copy of the installation package "status.msi".

    I tried to load the CD-ROM to boot for Vista (v.8.0.1) supplied with the printer (HP Officejet Pro L7580 all-in-one), but my computer will not play.  It will read start XP CD, but I can't find the file "status.msi" anywhere.

    Any help is greatly appreciated.

    Hi, I had exactly the same thing happen to me and I went crazy trying to solve this problem, but I did tonight and I want to tell you how I fixed it so hopefully it will fix it for you.  Run a desktop Dell with Vist Home premium 32-bit with SP2 and a HP 4315 all-in-one printer.  I got this answer directly from HP technical support.  I've updated via update HP and got an update of connectivity and had then windows Setup tries to install service.msi like you.  Here's what HP support said to do what I did and it fixed it.  go to start, all programs, uninstall HP, then select uninstall, everything.  Then go to http://support.hp.com enter your go product number for the drivers and software and then reinstall download it full of software and the driver.  Reboot and it should disappear.  Please let me know if it works
    Is the best,
    Kaja

  • error after update of the code and cannot re-boot

    After being asked to download an update from Windows on the Web and then to restart my computer two days ago, since then, I could not restart. I tried all the options available to start, restart, safemode, guest C (which I didn't), networking, you get the idea. I'm not savvy computer even if when I get to that screen I ' don't know how to get a "command prompt". I select options and they stop is to ' CHKDSK checks the index / an unspecified error has occurred "or! 0xc0190036! XXX/47373 (wer.dll)"or" Loaded: \windows\system32\drivers\crcdisk.sys please wait "in no case have I've been able to release one of the screens, once they get to this point, did I was able to reboot Windows in any mode whatsoever. I'm in Germany at the U.S. military running on a laptop with Vista. Help!

    1. how to record data, if necessary,

    2. put it back to factory settings.

    Data recovery:

    1. slave of your hard drive in another computer and read/save your data out there.

    2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

    3 Alternatively, use Knoppix Live CD to recover data:

    http://www.Knopper.NET/Knoppix/index-en.html

    Download/save the file Knoppix Live CD ISO above.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://isorecorder.alexfeinman.com/isorecorder.htm

    Download the Vista software from the link above.

    After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

    Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

    Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1st in the boot order.

    Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

    When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

    Click on the icons of hard drive to open and to understand which drive is which.

    Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

    Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

    There is no Vista free download legal available.

    http://eSupport.Sony.com/

    Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

    Normally, they do this for a cost of $ small.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

    See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

    Normally, you have to press F10 or F11 at startup to start the recovery process...

    Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Also ask them if it is possible to do the recovery disk/s since the Partition of recovery in case of hard drive failure or System Crash, when you are in service again.

    They will tell you how to do this.

    Every computer manufacturer has their own way of making recovery disk/s.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
    A good Vista DVD contains all versions of Vista.
    The product key determines which version of Vista is installed.

    There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

    If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

    http://support.Microsoft.com/default.aspx/KB/918884

    MS advice on the conduct of clean install.

    http://www.theeldergeekvista.com/vista_clean_installation.htm

    A tutorial on the use of a clean install

    http://www.winsupersite.com/showcase/winvista_install_03.asp

    Super Guide Windows Vista Installation

    After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

    Save all data, because it will be lost during a clean installation.

    See you soon.

    Mick Murphy - Microsoft partner

  • Error after update Blackberry AppWorld for blackBerry Smartphones

    I received notification yesterday to update BB AppWorld, in order to be the owner of BB little good I am, I immediately did so, since the update, whenever I try to use BB AppWorld I get an error:

    Uncaught exception: java.lang.NoClassDefFoundError

    Nothing else seems to be affected, however, after a few jumps of battery, I noticed the same error appears on the start screen on startup and will take 3 clicks the OK button to clear.

    It is worth mentioning that I have a 8530 Curve running OS v5.0.0.459

    Any ideas how to solve this problem?

    I've already deleted and reinstalled BB AppWorld as reinstalled the operating system (problem remains)

    THX

    Hi Dawnarie2280

    Go to the www.blackberry.com/appworld from your browser to update your BlackBerry App World for BlackBerry. The update will solve this problem.

    Thank you

Maybe you are looking for