Photos of masking

Different came to the pictures of effect state can be hidden by pressing the photo and see a new toolbar from Google.

Does not work on my iPhone 6 or iPad 2.

someone at - it advice?

Thank you

To hide a photo in iOS:

  1. Open the Photos app
  2. See photo
  3. Tap on the icon of sharing (lower-left) [Yes, it's against intuitive]
  4. Press "hide".

Before you start not to hide photos make sure you understand that just because hide you them in some points of view does not hide them from anywhere.  Unless you have a very in-depth understand exactly how iCloud, iTunes, Photos, work etc., you can expect that all the photos you take on your iOS device may one day arise somewhere other unexpected!  Take it old-school advice, if you do not want someone else to do something then never write it down (or take a photo of it in modern times).  Suffice it to say!

Tags: iPhone

Similar Questions

  • Creating a "game of darts' photos (circles, arcs,...)

    Newbie only to learn the basics of Illustrator (and InDesign).

    I'm looking to create a similar image of a movie poster below. A darts game of sorts, with thick white borders, and where I can fill in each section with a different photo. I played a bit with several circles and transparency... but to be honest, I have no idea what I'm doing! Are there any suggestions or links that would set me in the right direction on how to create such a design (in semisimple way)?

    Thanks in advance!

    360.jpg

    1. with the radial grid tool to create this

    2 use the Live paint tool to facilitate this

    3 object > flatten transparency (check "Contour lines")

    4. in the pathfinder Panel, click "merge". Disassociate. Remove white items

    Then, you can use forms colored like for your photo clipping masks.

    Please get all the Tools documentation. The detailed description is here.

  • Disable the Animation of the action bar while hiding

    BB10 photos Soft mask the action bar when you tap on the screen. When you do so, the action bar disappears immediately.

    In an application of Cascades, if you:

    Page-> setActionBarVisibility (ChromeVisibility::Hidden);

    ... the action bar to slide down until it is no longer visible.

    I would like to disable this animation, but I don't know how. For the standard controls, I do things like:

    ratingControl-> setImplicitLayoutAnimationsEnabled (false);

    ImplicitAnimationController = allDisabled
    ImplicitAnimationController::create (ratingControl)
    . Enabled (false);

    ... but I'm not familiar with a way to get a reference to the action bar itself, or how, independently of any reference to disable animation.

    Thank you
    Daniel

    Hi Daniel,.

    If you switch between hidden and visibility for the ActionBar overlay it will appear/disappear without animation. Overlay, that's what the photos app uses so the image should not resize when the ActionBar toggle visibility.

  • Main steps of editing?

    If you navigate to your edit in a race who are the main basic steps for a good result? The levels/contrast automatic etc way to go or is there a different way?

    And what are the additional steps that you would take if you had the time?

    Thank you

    Brushman1000 wrote:

    Photodrawken, thank you for explaining the different file types, it makes sense now!

    You are welcome.

    Brushman1000 wrote:

    As for making dodge / burn / blur etc after the setting of the layers, what your different method, could explain you it because I failed to do it your way?

    1. You must ensure that you have selected an image layer as the active layer, not one layer setting.
    2. You must click on the image of the image, not on the photo of mask, to make sure that the burn, etc., is done to the image.  When the image is correctly selected, it has an extra box around him:

    Ken

  • image sizes for the photo and moodboards clipping masks

    Hello

    I place images/photos to the web and Pinterest on my plans to work in Illustrator for both mood/inspiration cards as well to use with clipping masks.

    Should I adjust the size of the image files in photoshop before placing them so that my illustrator file does not become too large?

    Or can I use object > rasterize > and choose the resolution/ppi to do the same thing?

    Thank you

    LM

    elizabethm56272654 wrote:

    Should I adjust the size of the image files in photoshop before placing them so that my illustrator file does not become too large?

    Of course, you must define your own strategies for these questions according to your needs. Sure raster image data, excess will swell your files unnecessarily, but according to the availability of extra storage space in your computing environment and your ultimate output intent, may not be worth the extra time and effort for the goal-size things in Photoshop before placement. Only you can decide that priority. If the images are 'of the web and Pinterest', chances are, they are already low-resolution, and you would not shave number of bytes out of them anyway.

    Or can I use object > rasterize > and choose the resolution/ppi to do the same thing?

    N ° which is designed for elements vector rasterize at your chosen resolution. It will not change the resolution to something that is already rasterized.

  • Mask is not a link to photo?

    Hi, I'm relatively new to photoshop and have done a few masks, but this has not happened before. Whenever I'm done hiding and go to move my image, it moves just the photo under the mask instead of two of them at the same time as usual? I tried the links, but the option is grayed out.

    Screen Shot 2016-06-01 at 1.11.35 PM.png

    I want to go and move this image to a different location, but when I try it presents.

    Screen Shot 2016-06-01 at 1.12.19 PM.png

    Help, please! I tried to reboot several times but every time she does...

    Click between the thumbnail and the mask to restore the link icon:

  • Hi there from Hamburg/Germany. Since the last two updates of the CC, Photoshop crashes 95% when I work with masks. This gets really annoying when you know that I have about 120 photos to retouch to a customer. Any ideas what's happening here? Never

    Hi there from Hamburg/Germany. Since the last two updates of the CC, Photoshop crashes 95% when I work with masks. This gets really annoying when you know that I have about 120 photos to retouch to a customer. Any ideas what's happening here? Never had this problem before. Now, every time I create a layer mask, or try to work on a Photoshop freezes completely, forcing me to restart and (most of the time unless I have record EACH step) start of a scratch. Which is pretty much annoying... any suggestions?

    Move on to the Discussion of Photoshop

  • When I use my clipping on an image mask, fills the form I use the whole layer instead of just being a small shape Panel and then I put my picture on the shape layer, a clipping mask, but the form becomes clear with just a slight edge. The photo behind

    When I use my clipping on an image mask, fills the form I use the whole layer instead of just being a small shape Panel and then I put my picture on the shape layer, a clipping mask, but the form becomes clear with just a slight edge. The photo behind it does not move. I did this project of class before and it worked fine so I'm not sure if I have something started or... Any thoughts?

    I thought about it. That's all just stupid on my part and a bit of frustration because photoshop is my sworn enemy of then adobe added in. Thanks tho!

  • How can I add a gradient to a layer mask to counter a gradual change in the tone of one end of one photo to another?

    I swear I have go nutso.  I have a photo taken with a pretty extreme move of 10mm of a shift lens, which therefore has a gradual darkening towards the top of the photo.  No problem, don't tell me.  I just added a mask layer, click on the gradient tool and drew a line (in a good way) with this tool.  What I received was a transparent area at the black end (of the gradient applied to the mask) ranking to the darkest part of the image showing through to the other end (of the gradient).

    I've done it before and done the above, instinctively, so I thought that I was doing this right.  When it did not work, I tried applying the mask and the gradient to a duplicate background layer, and then flatten the image. Nada.

    Jees.  Something incorrectly? An other than normal blending mode?  I even checked with a CS6 by Martin Evening guide, which seems to be able to do exactly what I wanted without any problem.

    Or... maybe I 'm going nutso :).

    Thanks in advance,

    BAB

    Normal blending mode is correct. Suppose I want to clear up a segment of heaven in image1. Dupe of image and lighten it. It's the Image 2. I exaggerated the relief much here to make it more obvious to you. Please forgive me. Normally the lightning could be more nuanced. The gradient mask attached to the Image 2 starts at the top of the tail of the plane - not the whole image. The result is image 4. Maybe your success is due to the slope not starting and ending in the appropriate box. Note the gradient is black and white.

  • How layer masks to be recorded separately to be reused on other photos?

    I was watching a program of creating album that uses Photoshop as base and I noticed that it appears a selection of masks in a window under the photo... .quelquechose as a mini-Bridge, and here you can select different styles and masks etc. to apply to the image being edited.

    I thought it's pretty clean, because some of the masks could be fairly universal, so I tried to create one and save them separately but in vain.

    Then I created one, has taken a screenshot of it saved as a jpg file, then open that, selected all and tried to stick in a mask... .and still no go.

    Then... . How are they doing that?

    JJ

    Drag and Drop black Doc1 and Doc2 and Doc3 alpha channel Drop.  Note the size of the problem with Doc3.

  • How to set the limits of mask on a sequence of photos into a panorama

    I have merged successfully a sequence of photos taken along the shores of Lake Yellowstone with the installation of Photoshop elements 11 Photomerge Panorama.  The alignment is perfect, but heaven has gone wrong at one or two limits.

    panomerge.png

    Heaven is in the adjacent two pictures and I'm sure I could do a better job than the items if I could adjust the limits of mask and get rid of burrs area, but I can't find out how to do this.  Any help/advice would be appreciated.

    Thank you

    You must click on the mask icon. You're just painting on the image itself. Make sure the mask icon shows the outline around him before paintng.

  • Using mask for "Zoom in" on the Photo?

    Hi all

    I fight a bit to produce a smooth result for an effect that I am trying to achieve.  I am currently working on a price see the video presentation featuring a variety of photos that I would like to animate.  My main conflict comes when I hide a picture to the size of the mask remains the same, so that the image in the mask is scaling upwards or downwards and maybe moves using the anchor Point to distract from the image.  Another way to describe it is I want to zoom in/out on an image which is constrained by a framework that does not change its size or position.

    A method I've tried is to draw a mask rectangular around the image at the point when he first enters the composition.  This first mask is the exact size of the "frame" I want to preserve.  I then duplicate the image layer/mask, move forward in time on the layer of the original image and animate the scale and perhaps, anchor.  Then using the double image as a guide, I animated the original mask path to match the double size, which is made by the view.  I let the linear keyframes, but can still '; t get it as soon as the mask still seems to grow and then cut again. Take a look at this example below.

    I tried to copy the exact values of the original size of the mask 'framework', but the scale of these values with the layer itself and the framework does not retain its original size.

    I have a feeling, Miss me something perhaps of motorhomes this or parenting, etc.  Can someone point me to a tutorial or tip that can help to smooth this?

    Please let me know if you need an another informaiton, etc..  I am running CS5 on a Windows 7 PC.


    Thank you


    Lindsay

    You can make a solid mask, to the size you want and use as a track matte for the image below.  You can then scale the image as you wish, and the size remains the same.

  • Navigate in the photo when zoomed in and using the mask tool

    Hey guys, I tried to figure out how to move photo when I'm zooming in and using the mask and I can not understand. It's a pain to have clear the Brush tool can pan around, especially when I am trying to add a mask. If someone could help, it would be great. Thank you!

    Space bar.

  • Resize the photo but not the vector mask?

    If I use a vector for a picture of drawing as a mask, can I then change the picture and hide individually?

    There is a point in the center of the photo which allows me to move the mask, but how can I resize the photo without resizing the mask and resize the mask without resizing the photo?

    Thank you

    Hold down the Alt/Option + click this point blue Center to move/adjust the mask without worrying if the thumbnail of the layer is active.

    Regarding resizing regardless of them, I'm not aware of all the shortcuts except for:

    Decouple (click/enable/disable the link between the thumbnail of the layer and the mask thumbnail)

    Select the thumbnail of the mask.

    Change the values (W/H) in the PI. (You can also do the same thing here for the active layer thumbnail)

    Here is a tip that I use a lot of the time:

    Use AutoShapes like masks. It is those who have points in the canvas "controller" that allow to resize, change the angles etc.

    Example:

    A. open/import an image file.

    B. Edit > cut the image/bitmap to the Clipboard.

    C. adding a Rectangle object rounded on the Web and have it active before moving on to the next step.

    D. Edit > paste inside the contents of the Clipboard (the image).

    The result is your image with the a vector mask was consistent with the auto shape (in this case, the rounded Rectangle).

    That's the problem - select the vector mask thumbnail and you will see again "anchor controllers" there: resize and corner radius.

    h

  • Mask photo gallery when edited

    When I edit a photo in the Gallery, it becomes a hidden file.  I can't see it in the gallery or in the browser, but when I copy the file origin to another folder, it asks if I want to replace the file.  Obviously if this is not corrected Gallery is a program that I will never use again.

    Hello

    The question you posted would be better suited to Windows Live Solution Center. I suggest you to send your application in the Windows Live Solution Center for better support.

    http://windowslivehelp.com/product.aspx?ProductID=20

    Hope this helps,

Maybe you are looking for

  • Mini 1000: Mini 1000 system stopped

    Hi my mini comes with CNU9232HRK system. I looked at the other post I tried other master passwords. And nothing. Can anyone help. Thank you

  • Display of the BIOS T61p with 8 GB of RAM

    I realize that the T61p Merom and Penryn units will support a pair of RAM DDR2 4 GB modules. My question is the v2.29 Lenovo BIOS shows 8 GB regardless of the operating system? Thank you. ____________________________________

  • How can I update my Windows XP Professional for Windows 7/Vista?

    I am running Windows XP Professional. My computer has 768,50 MB if physical memory with 538,99 MB of available space. Virtual memory is 2,00 GB, with 1.95 GB available. Can I upgrade to Windows 7 or Vista? Original title: I am running Windows XP Prof

  • Try to change the text on a memorial with image.jpeg

    When I paste my picture/text in Notepad or wordpad, it still display in a kind of code. I can't read or do anything, including the image. How can I make it stick to look exactly as it is in my photo file?

  • Problem IOS 15 and VTY ACL

    Dear community! We have recently installed a router C2951 running the version IOS 15.0 (1). However, we have a VTY ACL configuration problem. When trying to connect to the router via SSH, the ACL VTY has some matches on the SSH client's IP address, b