Photos of USB transfer to computer error

Similar Questions

• USB transfer cable does not recognize the photo LCD

  I'm trying to transfer photos to jpeg from my computer in a LCD photo frame.  I use a usb gigaware transfer cable.  When I select drive e: im to insert a CD in the e drive.  All usb ports are saying the same thing. Insert the disk into drive e:.  The photo frame supports my portable usb files in jpeg format, but I can't seem to get the program to be saved in the internal memory of the frame and can not copy and paste it because the opinion of disk insertion.

  Hi Coloradosioux,

  Question: "Please insert the disc in the drive" message when you access a USB flash drive.

  Here are some possible solutions for your question. I would like to know how it works:

  Method 1:

  1. Insert the removable disk in the removable drive before you start your computer.

  (Make sure that you have not the bios Setup to boot from the USB drive)

  Method2:

  1 log in as administrator or with an account that has administrator privileges

  2. Insert your removable disk into the USB port.

  3. Click Start, right click on computer and select Manage

  4. click on disk management

  5. right click on the removable disk partition and select change drive letter and paths to the title of the disk management.

  6. change the letter of the USB key to a different drive letter.

  Reference:

  http://www.troublefixers.com/how-to-fix-please-insert-a-disk-into-drive-error-in-Windows/

  Hope this helps,

  Steve <> Microsoft Partner

• I tried to install 300 photos on a USB I installed and come with an Ox80070052 error message. Please advis how can I install the rest of the photos without the passage of the error.

  I tried to install 300 photos on a USB I installed and come with an Ox80070052 error message. Please advis how can I install the rest of the photos without the passage of the error.

  Hello BrendaMay,

  ·         What exactly do you mean by saying that you install photos?

  ·         You try to copy photos from your computer to the USB key?

  Try to format the hard disk to the NTFS Format USB and check if you can copy the photos.

  If does not work, try to format to FAT32.
  1. type devicemgmt.msc in the Vista Start menu or in the Run dialog box.

  2 expand disk drives, right-click on your USB key that you want to format it in NTFS file system, and then select Properties.

  3. on the Policy tab, select optimize for performance option. Click OK and return to my computer.

  4. right click on your key USB. Select Format.

  5. Select NTFS from the drop-down list (you can also select FAT32).

  6. click on apply to format your drive to NTFS.

  Note: The pilot of formatting will destroy all data on the disk.

  If this does not work, try to create a new folder in the drive, and then copy the photos on this folder.

  Thank you

  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• I tried to install 300 photos on a USB I installed 170 photos and come with an Ox80070052 error message. Please advis how can I install the rest of the photos without the passage of the error.

  I tried to install 300 photos on a USB I installed 170 photos and come with an Ox80070052 error message. Please advis how can I install the rest of the photos without the passage of the error.

  Hi BrendaMay,

  Take a look at this link http://social.technet.microsoft.com/Forums/en/itprovistasetup/thread/bf17ed76-5164-4380-9140-16bd74e7c8c7 and check if the post by Ira Horowitz to Monday, December 24, 2007 15:04 is a good one to try.

  Kind regards

  SAP

• The difficulty to move the files to shared documents files and transfer documents to my USB on my computer

  I'm moving all my documents and music files in the folder documents shared on my computer but its telling me C:\ is not accessibble, access is denied.
  He responds in the same way when I try to move files that that are on my USB on my computer.
  I don't know if this has to do with the hard drive or what he can possibly be or how to fix it. Help, please. Thanks in advance

  Hello

  • Connect you as an administrator?

  You can refer to the following steps:

  1. Log the computer with an account that has administrative credentials. If you are running Microsoft Windows XP Home Edition, you must start the computer in safe mode, and then log on with an account that has administrative rights to access the Security tab.
  2. If you use Windows XP Professional, you must turn off Simple file sharing.
  3. Right click on the file/folder that you want to take control and then click Properties.
  4. Click on the Security tab, and then click OK in the security message (if one appears).
  5. Click Advanced, and then click the owner tab.
  6. In the name list, click your user name, click administrator if you are logged in as administrator, or click the Administrators group. If you want to take ownership of the contents of this folder, select the check box replace the owner of subcontainers and objects .
  7. Click OKand then click Yes when you receive the following message is displayed:
     You are not allowed to read the contents of directory folder_name. Do you want to replace the the directory permissions with permissions granting you full control?
     All permissions will be replaced if you press Yes.
  8. Click OK, and then reapply the permissions and security settings that you want for the folder and its contents.

  See also:

  http://support.Microsoft.com/default.aspx?scid=kb;en-us;308421&product=winxp

• Satellite A60 - very slow USB transfer speed

  Hello

  I have a Satellite A60 with XP Home and the USB transfer speed is very very low. Is 2.0, but it is not working properly, because it takes about 30 minutes to copy the data from 1 GB on a USB 2.0 drive externally.

  I tried my USB drives on another computer and work quickly and well, so it is probably just a problem of drivers, but can't find them on the web from Toshiba to reinstall them. I heard that it is a common problem after installation of XP Service Pack 2, but I didn't do anything, I use the operating system as it came when I bought the laptop (with XP Home SP2 preinstalled original), I do not change any configuration or install drivers that can affect to the USB controllers and it has always been so slow.

  Could someone help? I tried to reinstall the drivers from Toshiba, but I think that there are not more special just for the USB, what should I update then? I need to improve the transfer speed of USB data for professional purposes, because I can't lose so given at the time of the transfer, please please please help!

  PS: Sorry for my terrible English, but it is there no Toshiba forums on my tongue: P

  Hello

  USB drivers are part of the operating system and you are unable to download the USB drivers separately.
  In my view, it is really not necessary to reinstall the USB drivers because the USB HDD is recognized correctly and it works.

  USB 2.0 transfer speed 480 Mbps supports and if any didn't error message then the USB ports running at full speed.

  For more details, please see this page of Microsoft;
  http://www.Microsoft.com/windowsxp/using/networking/learnmore/jones_02august05.mspx

  Last but not least I would recommend to update the XP to the last State. I mean that you need to install all of the available patches and fixes.

  Good bye

• Help! Unable to connect USB with the computer!

  Hey... I use bike g 2nd GEN recently, when the options of connectivity usb came... I have disabled by error two options... And now, when I connect my phone with cable USB WHAT DO not come connectivity options to the top! And only charges the phone!
  
  I also tried the check in the phone settings... But no use... Help, please!

  Go to settings > storage > tap the icon at the top right (3 vertical points) > Connect usb to the computer, you can select the USB options.

• Download photos from the xD for computer

  Original title: download photos/xd card

  How do I get pictures of card XD-picture card on my computer (gateway SX2110G)? Also of my files on facebook

  Hello albertpetersen,

  Welcome to the community Microsoft and thanks for posting the question.

  According to the description, it looks that you are having problems with the transfer of photos from XD card in computer science.

  1. what operating system is installed on the computer?

  2. What is the brand and model of the XD (Extreme Digital)?

  See the links below:

  For Windows XP:

  http://Windows.Microsoft.com/en-us/Windows-XP/help/digitalphotography/download-pictures-from-digital-camera

  For Windows Vista:

  http://Windows.Microsoft.com/en-in/Windows-Vista/how-do-I-get-pictures-from-my-camera-to-my-computer

  For Windows 7:

  http://Windows.Microsoft.com/en-in/Windows7/how-do-I-get-pictures-from-my-camera-to-my-computer

  Meet us if you experience problems with the transfer of photos or any other problem of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.

• When I send e-mail thrugh photos I often get this response: error - ID:0 X 80070057.

  I get the error message - ID:0 X 80070057 on my XP computer.  Help!.

  When I send e-mail thrugh photos I often get this response: error - ID:0 X 80070057.

  This happens not all the time, but it happens often.

  Hello

  1. What mail client do you use?

  If you use Windows live mail, so I suggest you to report the problem in this forum:
  http://windowslivehelp.com/solutions.aspx?ProductID=1

  Otherwise, provide us with more information, so that we can better help you.

  It will be useful.

• I can't open my USB stick says load error

  I put my USB in the computer, but for the first time it would not open - says Error loading. There is a lot of work on it and I did not save on hard drive. The job I want to recover is a presentation power point

  Hi SydneyToppin,
   
   
  -What has been the recent change that was made on your computer after this problem started to happen?
   
  -What, exactly, is a transcript of the error message that you receive?
   
  Try to insert the Flash DRIVE to another machine and see if the problem still occurs.
   
  Run the fix it tool from the link given below and check if it helps in fixing the issue:
   
  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

• Random BSOD, get several error codes: IRQL_not_less_or_equal. Error code USB bug; memory management error

  For the last two months I get random blue screen of death, codes seem to change from time to time, initially it was level IRQL each time and then one or twice USB bug and then error code once, it was an error of memory management code.  Sometimes I get a screen saying something about checking some recently installed device causing problem, but nothing has been installed recently.

  I have and HP Windows Vista Home Premium SP2, AMD athlon 64 X 2 Dual core 5000 + 2.60 GHz memory is 3.0 GB; system is 32-bit graphics card is NVIDA

  The BSOD happens randomly and it can happen just when I turn on pc (so I don't think overheating is the question) or pc will be fine for a day or two and hang after that pc sat for an hour.  PC GOLD may be on all day and is very good.  I tried to run the "controls" and everything keeps the fine.  I even thought it may have been my antivirus so I changed it and still doesn't solve problem.  I ran checks software malware, viruses, etc. and have not led to what.

  It seems that after some update was made with windows was when I started to have problems, but could be a coincidence.  I looked around but have not found anyone with a similar problem like mine, in regards to get multiple error codes and bsod.  To restart, I usually have to unplug the pc and wait a bit to try to restart and go through all process control but all "passes". Thanks in advance for your help.

  Hi kcsun,

  Blue screen errors can be caused by either a software or hardware problem.

  See the below Microsoft article that could help you solve random blue screen of death on the computer.

  How to fix bluescreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

   

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I get startup repair screen when I try to boot my laptop from dell inspirion windows 7, I run the scan and detects any errors. When I ran repair usb key received the error 0x400110020000100A

  I get startup repair screen when I try to boot my laptop Dell Inspiron windows 7, I run the scan and detects any errors. So, I tried to use a USB repair for a laptop Dell Latitude Windows 7 pro and I still can't the computer to start. Tried to restore to the factory settings, can not. I have no image, backups, all missing, restore points?

  After that I tried to launch the USB repair I got 0x400110020000100A error code and I received error (0x8007027E) indicating the device will not start without a reboot.

  Anyone know how to fix this?

  Any advice would be greatly appreciated. I'm not computer illiterate, but am not pro either. Just use them not program them or even understand all languages!

  ____________________________________________________________________________________________________________

  Dell Inspiron laptop about 4-5 years.

  Running windows 7 Home Edition.

  Does not start little matter what I tried.

  If I remember correctly, I looked in MS-DOS mode and noticed that it said something like "x: win...» "that seemed strange to me because I thought that it should say"c: victory... "but as I said I am not a computer wiz so if anyone can help me, I would appreciate it.

  I'm about to rip the hair off my head with my laptop. My latitude was blue planned, surprisingly I fixed it (don't ask how, you couldn't tell). Then my dell inspiron would not start right after my dell latitude fell out of my truck and landed on the sidewalk, wanted to kill the person, the screen is broken. I can use it but it is very difficult, see a mosquito net and not perfectly clear, works well. lol someone knows somewhere or that would install a new screen for a reasonable price? I live in the Boston area.

  Back to the laptop won't start not, when I ran repair USB key received the error 0x400110020000100A

  Hello

  Thank you for the update on the issue. I appreciate your time and effort in resolving this issue.

  You can try the following methods and check if it helps.

  Method 1:

  You can use the Bootrec.exe tool in the Windows recovery environment (Windows RE) to troubleshoot and repair the following items in Windows Vista or Windows 7:

  • A master boot record (MBR)
  • A boot sector
  • A Boot Configuration data (BCD) store

  Note: When you are troubleshooting startup issues by using the Windows RE, you should first try the Startup Repair option in the System Recovery Options dialog box. If the Startup Repair option does not resolve the problem, or if you must troubleshoot more steps manually, use the Bootrec.exe

  Use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

  If the problem persists, proceed to method 2.

  Method 2:

  Please follow these steps:

  1. Tool command prompt open in the mode of the Windows recovery environment .
  2. You will see X:\Sources
  3. Type chkdsk c:\ at the flashing prompt to launch the utility Chkdsk. replace c:\ with the letter of the drive that you want to run the Chkdsk utility. If the hard drive is d:\, then type that instead.
  4. After the "chkdsk c:\. "insert \f command to fix errors on the disk volume or the \r to recover bad sectors and then press ENTER.
  5. Restart the computer once the chkdsk command has completed.

  Note: Running chkdsk on the drive if bad sectors are found on the hard drive, it attempts to repair this sector, if all available on which data may be lost.

  For more information: Please refer to the section of the additional If you can not boot into Windows at all stages in the following link.

  Resolve stop (blue screen) error in Windows 7

  http://Windows.Microsoft.com/en-in/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Cannot transfer the file to WCS 5508 - Code file transfer failed - unknown error - refer to log

  Hi all

  This is my first time here posting. I have some difficulty to transfer files to my WCS 5508. My intention is to upgrade to

  6.0.196.0 to 7.4. We recently bought 2602i access points and we need to update our controller software so that the controller save the new access points. I also improved the interface controller 7.0.240 WCS software.

  However, I have not been successful transfer the file to the controller for the upgrade.

  I have tried everything I know:

  * transfer the file of different programs including tftp32d and solarwinds TFTP server

  * transfer the file of different applications such as FileZilla and FTPD FTP server

  * transfer the WCS web interface file

  * running a direct connection to the WLC with a static IP address on the interface

  * verified that there are no interfering firewalls with transfer

  * adjusted times waiting and pads as a result

  I get no error message on my software FTP or TFTP, which would indicate something wrong with the applications. I think it is a bug with the controller.

  The transfer reachers about 97MB before it fails.

  Here are the error messages I get when I run "transfer of debug output all" from the CLI of the controller

  I feel I forgot something...

  # #debug transfer all out #.

  * Did not write body

  * Only partial file received: 97086398 bytes

  * 23:55:26.248 Mar 06: ftp operation returns 23

  * 23:55:26.253 Mar 06: tftp = 4, = file_name / AIR-CT5500 - K9.aes, ip_address = 10.5.1.18,.

  MSG = unknown error - refer to log

  * 06 Mar 23:55:26.470: upd_get_code = 4 (target = 33744 msg = unknown error - see t

  O log)

  * 06 Mar 23:55:26.470: RESULT_STRING: % error: file transfer has no codes - Unknow

  error - refer to log

  * 06 Mar 23:55:26.470: RESULT_CODE:12

  * 06 Mar 23:55:26.470: ummounting: DLG = / mnt/applicati

  on

  * 23:55:26.577 Mar 06: finished remove

  % Error: Code of file transfer failed - unknown error - refer to log

  #############################################################

  Here's my output sysinfo sh.

  release of sysinfo #show # #.

  Name of the manufacturer... Cisco Systems Inc..

  Product name... Cisco controller

  Version of the product... 6.0.196.0

  Bootloader Version... 1.0.1

  Retrieving Image Version field... 6.0.182.0

  Firmware version... Console USB 1.3, 1.6 Env FPGA,

  1.27

  Build Type....................................... DATA + WPS

  Name of the system... WCS_01

  Location of the system... G5

  Contact System...

  ObjectID of system... 1.3.6.1.4.1.9.1.1069

  IP Address....................................... 10.1.0.17

  Last Reset....................................... Software reset

  Time system... 0 days 0 h 53 min 10 dry

  Location of the time zone of the system...

  Base boot license current level...

  Current license type Boot... Permanent

  Next time you start level license... base

  Next Type of license to Boot... Permanent

  ###############################################################

  Any suggestions? Am I missing something?

  Well... Since you're WCS, v7.0.x is the only code that are supported for the WCS.  Look here.

  http://www.Cisco.com/c/en/us/TD/docs/wireless/compatibility/matrix/compatibility-matrix.html#18972

  So the trick to this is downgrade to v7.0.x and add the WLC WCS and then go to v7.2.121.0.  As long as the WLC is added and is attached to the WCS, you can upgrade.  If the WLC is not attached, you will never get to add with a more recent version of the code.

  Thank you

  Scott

  Help others using the system of rating and marking answers questions like "answered."

• Unable to print from other programs like Gimp and the error is "your photos cannot be printed because this error occurred.

  Original title: I can print from other programs such as Gimp, just not windows live photo

  When I first installed Windows Live I could print very well but now I have the same box that says "your photos cannot be printed because this error occurred.  I looked in the forums and found several answers, but none that have the situation corrected.

  Hello

  Thanks for posting your question in the Microsoft Community.

  From your problem description, I understand that you can not to print from the program Gimp and the error is 'your photos cannot be printed because this error occurred'. Please let me know if this isn't the problem that you are experiencing.

  I understand the inconvenience caused to you. I'll help you solve the problem!

  Before troubleshooting, I have little information on the issue.

  1. what type of image file?

  2 are you facing this problem with specific program or all programs?

  3. did you of recent changes to the computer before this problem?

  4. What is the serial number and model of the printer?

  Note (1): If you are faced with the question with all programs, try the methods you haven't tried earlier and then check after each method:

  Method 1: Print a test page:

  http://Windows.Microsoft.com/en-CA/Windows7/print-a-test-page

  Method 2: Why can I not print?

  http://Windows.Microsoft.com/en-CA/Windows7/why-cant-I-print

  Note 2: If the problem is with the specific program (Gimp), I suggest you contact the manufacturer of the program.

  http://www.GIMP.org/webmasters.html

  Reference link:

  Picture printing: frequently asked questions: http://Windows.Microsoft.com/en-us/Windows7/picture-printing-frequently-asked-questions

  If the problem persists, post your reply with the results and the questions asked above. We are happy to help you further!

  It will be useful.

• HP Pavilion P2-1140 does not have a way to connect to a Firewire port and USB transfer is not supported by Windows 7 to connect the Sony HC20 Handycam.

  Original title: Sony Hanycam HC20

  I just bought a HP Pavilion P2 - 1140 W7 64 bit and may not know how to download video from my Sony Handycam HC-20 who

  using a Firewire connection. P2-1140 does not have a way to connect to a Firewire port and USB transfer is not supported by Windows 7.

  I looked in the spec of my card mother HP and there is no additional slots to add adapters, no PCI, PCI-e or anything that looks like

  as if you can add anything. I know that the Firewire to USB converters cable do NOT work, any suggestions please

  There are USB firewire converters, but I think it will be a situation of hit or miss--they are unable to work or perform very well.

  The only option I can think of that would work would be to use AV out on the camera and a USB capture card that records on the computer.
  You can also consider going back to the computer and get a different model that is built in firewire support or at least an extension connector in order to get an expansion card.