Photos transferred via USB use optimize the functionality for iCloud photo library?

Similar Questions

• RN104 freezes when you make significant transfers via USB 3.0 on 6.4.0

  My RN10400 works great since the purchase. However, I have never transferred via USB abundantly; all data have been loaded on the network. Now I have a lot of folders on a drive HARD USB 3.0 that I try to move to the NAS. When I try to copy on it will start at full speed and stays there for about five minutes. It seems then to have overloaded and from 100% to frozen in a fraction of a second. No no warning, no error, just insensitive and frozen. I tried the copy three times with the same result, and I have to remove the power to remit on the. There are no applications installed or running. 6.4.0 ordinary. Whenever I have pull the plug I need to Resync quickly the data on the volume, while this process is getting old.

  Any suggestions?

  Update: I've upgraded to 6.4.1RC and I still have the same question. A pull the plug to get back on the new =)

  Hello, @Learning2NAS

  In my case (erratic freezezs when writing large files on the disk).

  An upgrade to 6.4.1 RC1 + Factory reset (AKA factory reset under 6.4.1) solved the problem.

  As a test I did went back to 6.4.1 to 6.4.0 stable (what joke ;-)) and it froze again immediately.)

  If you're up to wipe your NAS, try a factroy restore 6.4.1 before attempting to downgrade.

  Please post the result of this, it would help many other contributors

• What language he used in the functions of triggered

  What language he used in the functions of triggered

  Animate the engine behind the edge is powered by javascript.

  Darrell

• Determine the maximum use of the processor for a virtual computer in the custom user interface

  I want to determine the maximum use of the processor for a virtual computer in the custom user interface.  How can I do this?

  If I use a supermetric, there is no kind of attribute under CPU called "maximum use.

  Certainly, you get points for a long question! Although to be fair, it's probably my fault to feed you so much information to digest at once.

  1. I would say you can do two ways visually. Use the operations > detail view for 'normal ranges' use the upper limit of the normal range as your typical max. You want an absolute peak, add the metric of a graph or observe that highlight high and low watermarks.

  2. There are a lot of ways to display data, but if you want to display a single metric over a period of time, we could use the following widgets [on top of my head]:

  Top - N analysis

  Weather map

  Analysis of distribution of data

  Among these, I think of your desire for a "peak". Who you want real value, which eliminates the weather map. Then, I think that the concept of a 'Summit' and what is the best thing, I think that the 95th percentile... then I came with the widget of data distribution. The decision is ultimately yours given your particular use case.

  3. you can have it apply to several virtual machines - it's just a widget capable of being an independent provider or receiving widget (metrics, DO NOT choose to select resources). Each resource/metric will add to the widget and you can remove them if you like after it is added. You can certainly all the time you visit... It is date and time standard options you have in all the other widgets chart. With the widget data distribution, you want as much time as possible to get an accurate histogram of the cycles of workload.

  4. This is similar to the question above. You can certainly add parameters of individual resource or a DM that summarizes or AVG groups of resources. And as above, the delay is configurable, along with the other graph widgets.

  5. it's part of Q4 - you can sumN or avgN up to any number of resources with a SM, then discovers that SM in the widget of data distribution. When I said container, I mean an application, group resource pool... all that acts as a container parent within the vCOps.

  6. that's correct, SMs calc using data collected last points... aka single period of time. When you are referring to the longest period, I gave you a few examples of the attributes that are composed of several periods of time which are calculated and created by the adapter for VMware vCenter behvaior. In this case, you have the GVA 15 min CPU 1.5; These specific simple mobile GVA can be specific OR a copy using SMs. Next, you will have the chance is to find a way to distribute what you need through a widget [at that time].

  7. the distribution of data is not for export, it is for Visual functions. If you want the data in CSV, just use a typical chart of metrics and export to a csv and calc your own pics, avg, 95th, whatever.

  8. This is a bit of a mix of all your questions, put in place.

  You are right, if you added those 3 VMs, then calc was the 95th of the AVG. Like Q7, you would not export the data of the distribution of data because the raw data points are not - you do not pass the metric to a metric graphics standard and export via csv.

  Take advantage of...

• can I use create valude function for MSSql scalar and table.

  Hello
  
  (1) can I use create scalar function for MSSql and function table?
  (2) is there how many type of function defined by the user in oracle 11 g express?
  (3) and I can reture 'type' any form user defined function?
  
  
  Attract sincerely

  944768 wrote:

  the answer lies in a few cases only,

  The response illustrates the basic concept of how customers need to use cursors created using PL/SQL as a layer of abstraction - SQL and this concepts adapts to ALL cases where the customer wants to Oracle via PL/SQL cursor.

  a case is,
  If my function returns only a single value, then I can use oracle 'create function' with the return type as types predefined as a whole, varchar2 etc?
  with regard to performance.

  With regard to this performance problem? And why now suddenly change the question to want to use a function to return data type number or string? How does this relate to PL/SQL to return a cursor now?

  A function can return scalar values, not scalar. A function may return atomic values (such as a unique number, or a non-scalar list of numbers). A function can return a complex data structure consisting of scalar values, not scalar.

  However, in PL/SQL function must NOT be used to read the lines of the database to cache lines in a memory of the server PL/SQL (PGA), then back to the client.

  He does not. It does not fit. It is too bloody dangerous to the overall health of the server as such code plays silly blighters with very expensive server memory.

  A PL/SQL function can also be used as guideline, returning data via expensive PGA, but via the SQL engine instead and using its slider interface (which allows output data to be "gradual" and not to return all data with a single copy of croustilleur mass of the call stack) directly. IT IS, HOWEVER, AN EXCEPTION. There is very rarely the need to make the functions PL/SQL pipeline table - and is often victims of abuse and bad demonstrated with examples of absurd code here.

• Error: the registry settings used by the iTunes for importing and burning CDs and DVDs are missing.

  Original title: the registry settings used by the iTunes for importing and burning CDs and DVDs are missing. This can occur as a result of installing other CD burning software. reinstall iTunes

  I've loaded and discharged Itunes 5 times and still get the same error message box. This error does exactly what he says, I can not burn anything in my itunes library. ITunes worked great in XP-3 no problems. It will not work on Windows 7-64.  I can download and play songs from any site, but can not burn anything.  And I don't have any other burning software on my CD PC

  Hello PohlCat,

  Given that you have uninstalled and reinstalled iTunes without correcting the problem, it may be with a 3rd party product causes a problem.

  I would look at the post here to see if this solution can help you. It's from a 3rd third party site, you should use at your own risk, because it has not been tested, but seemed to help others with the same error that you are experiencing.

  Please reply back and let us know if this can help.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I want to create the function for the function create for ODD or EVEN (NUMBER)

  I want to create the function for the function create for ODD or EVEN (NUMBER) also
  If number is odd, multiply by 5
  If there is an even number, multiply it by 10;

  Not tested,

  create or replace function fnc_env_odd(p_number in number)
  return number as
  begin
   if p_number>0  -- Remove if you want to consider negative numbers also
     if mod(p_number,2)=0 --Means even
        return p_number*10;
     else                 --Means odd
        return p_number*5
     end if;
   end if;
  end;
  /
  

  G.

• How can I save the iphoto for flash player library

  How can I save the iphoto for flash player library

  Where is the flash player? It is external, or what?

  Barry

• Help my Probbok 6360 b, lost mouse width: cannot use the mouse via usb or on the mouse area

  I recently lost the mouse and that you have not saved my files on the computer, ive done nothing to cause this problem, any help is appreciated.

  I think that it must be something windows of width for do not cause computer usb sound and the area of the mouse.

  Maybe it's a troll again, I don't know. (A troll in the forest).

  Thanks, I don't know if this would have worked. I took the hard drive and saved my music and then reinstalled and got the mouse works, haved so many programs anyway I've wanted to get rid of.

  Thanks anyway.

• Impossible to print via USB using my iMac running 10.6.8 Officejet 4635

  I bought this printer all in one HP Officejet 4635 yesterday and are unable to print via USB.  I have an iMac running OS 10.6.8.  Until I'veI tried all of the suggestions that I could find on these forums (ex: downloaded the latest driver, disconnect/reconnect the power to disconnect/reconnect usb, delete and 'Add PRINTER' again, etc...) The computer does not recognize the printer, but displays "Unable to send print data" after I click on print.  I know that the printer works very well because I was able to send the document directly to his personal email address.   Help, please!

  Hello! Welcome to the @DanLA forums

  I have seen your post about how you can't use your Officejet 4635 with your iMac running 10.6.8. I understand that you have already tried troubleshooting, so please ignore all the steps that you have already tried in the list of my own suggestions below. If you still can not connect then, think of give us a call. I'll leave the details below.

  1. Mac OS X: how to reset the printing system
  2. Repair disk permissions
  3. Restart your Mac
  4. Reinstall the complete driver: 4630 Officejet HP e-All-in-One Printer full feature software and drivers series
  5. Try another USB cable
  6. Look for an update of the Firmware: get the latest Firmware and updates
  7. Make sure that the printer is plugged directly into the wall, avoiding bars power and surge protectors. This ensures that the printer is full on and can help.

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Good luck!

• Re: How to change its use of the function keys?

  The function keys on my laptop P870 are keys to double action. You must press the FN key at the same time as the key function F1, F2. In particular, I use the F2 key a lot but have to use 2 hands (unless you have extremely long fingers) to operate the function keys driving me crazy.

  Any suggestions?

  If you use open Office assist Win8 > system settings > keyboard and function keys mode change.
  Change of cell function special mode reboot and test how it works.

• Correct use of the function in the pipeline?

  Hello

  I have a function in the pipeline, I am using 11 g. the idea is I can pass in the name of a table, and it returns a set of rowcounts for this table

  I obviously have something wrong, but what?

  -Package

  create or replace PACKAGE IS GetMigSamples

  -set types for a record and an array of records like this
  

  TYPE sample_record IS RECORD)

  PERSON_ID NUMBER,

  CF_ID VARCHAR2 (10),

  number_of_records NUMBER);

  TYPE sample_table IS the TABLE OF THE sample_record;

  FUNCTION SP_MIG_SAMPLES (P_TABLE IN VARCHAR)

  RETURN sample_table

  IN PIPELINE;

  END;

  -Package body

  create or replace PACKAGE GetMigSamples BODY IS

  FUNCTION SP_MIG_SAMPLES (P_TABLE IN VARCHAR) sample_table RETURN PIPELINED IS

  v_cur sys_refcursor;

  v_rec sample_record;

  v_migtable VARCHAR (64);

  v_stmt_str VARCHAR2 (400);

  v_col VARCHAR (64);

  BEGIN

  v_migtable: = P_TABLE;

  -some tables have a different name for the foreign key column
  

  v_col: = box

  When v_migtable = "MYTABLE" then "MAIN_ID".

  another end 'PERSON_ID ';

  -build a sql query for this table and the foreign key column

  v_stmt_str: = ' SELECT

  MX.' | v_col |' like PERSON_ID,.

  COALESCE (MX. Reference, "?") as CF_ID,.

  Count (*) as number_of_records

  OF ' | P_TABLE |' mx

  GROUP BY mx.' | v_col;

  -Open the query and loop through it, each line of pipes

  Open the v_cur for v_stmt_str;

  LOOP

  EXTRACTION v_cur

  IN v_rec;

  EXIT WHEN v_cur % NOTFOUND;

  PIPE ROW (v_rec);

  END LOOP;

  CLOSE V_cur;

  RETURN;

  End;

  END GetMigSamples;

  When I use it

  Select getmigsamples.sp_mig_samples ('M_MY_TABLE') of double

  I get

  FW. SYS_PLSQL_228255_29_1()

  Which I guess means that I have a reference to an object, rather than the actual values in the lines. I tried to corrrect it for centuries and have now arrived at the point of the tear-my-hair-out. Can anyone help please?

  Thank you

  When I use it

  Select getmigsamples.sp_mig_samples ('M_MY_TABLE') of double

  I get

  FW. SYS_PLSQL_228255_29_1()

  Which I guess means that I have a reference to an object, rather than the actual values in the lines. I tried to corrrect it for centuries and have now arrived at the point of the tear-my-hair-out.

  No - this 'thing' you got is a hidden type of SQL Oracle automatically created to match the type of PL/SQL, that you used. SQL can only work with the SQL types defined at the schema level. But for functions PIPELINED Oracle allows you to specify the types of PL/SQL and it will create SQL HIDDEN types to make it work.

  A pipeline function should be treated as a table. You must use the SCOREBOARD operator

  Select * from table (myFunction);

  Try this simple example

  -type to match record emp

  create or replace type emp_scalar_type as an object

  (EMPNO NUMBER 4,

  ENAME VARCHAR2 (10),

  USE VARCHAR2 (9).

  MGR NUMBER 4,

  HIREDATE DATE,

  NUMBER OF SAL (7, 2)

  NUMBER OF COMM (7, 2)

  DEPTNO NUMBER (2)

  )

  /

  -records of the emp table

  create or replace type emp_table_type to table of emp_scalar_type

  /

  -function of pipelined

  create or replace function get_emp (p_deptno number)

  return emp_table_type

  PIPELINED

  as

  TYPE EmpCurTyp IS REF CURSOR RETURN emp % ROWTYPE;

  emp_cv EmpCurTyp;

  l_rec emp % rowtype;

  Start

  Open emp_cv SELECT * from emp where deptno = p_deptno;

  loop

  extract the emp_cv in l_rec;

  When the output (emp_cv % notfound);

  line of conduct (emp_scalar_type (l_rec.empno, LOWER (l_rec.ename),

  l_rec.job, l_rec.mgr, l_rec.hiredate, l_rec.sal, l_rec.comm, l_rec.deptno));

  end loop;

  return;

  end;

  /

  Select * from table (get_emp (20))

  See use of the SCOREBOARD operator?

• How to use properly the function of time series dynamic H-T-D

  Hi all.
  
  Our time Dimension goes as default
  Period
  -Total year
  -Qtr1
  -Jan
  etc...
  
  Now when I put in place HTD (absence of any explanation on the Documentation)
  I put the generation at level 2. Nice function that much is done that for a YEAR, summarizes the total for the year given the current month. What we try to accomplish is to get the values of all data saved on the datal summary current current. Now, this can happen years being in a dimension of differnet. So my main question. Is this possible to do? and what is the main function of H-T-J? Thank you.

  So that HTD make sense, your time Sun will have to be an exercise in cross on the model where your campaigns and periods are in the same Sun

  Time
  -2009
  -Q1
  -Jan
  February-
  -2008
  -Q1
  -Jan
  February-
  -2007
  -Q1
  -Jan
  February-

  In this example CDA would set at Gen2 and HTD would be set at Gen1.

  If your year and periods are of different dimensions so cannot use DTS to run story in the numbers of the date. Derwiche woul in place you put calculated members using formulas of Member and the @XRANGE function.
  (you might be able to do it without @XRANGE, but it would be useful)

• Use of the filter for the simplest needs Expression

  On the project I'm working on, I use rule Manager to evaluate hundreds of rules against the simple events based on a table alias (a line at a time, as the documents are). However, my needs are evolving to support multiple sets of rules that would be assessed against incoming data conditionally. It will also be managing versions of rulesets.
  
  These requirements do not appear to correspond to the way that rules Manager stores its rules, where all rows in a table of the Rule are always evaluated, and any creation of a new category of rule requires a new table, recall stored proc etc... I am mainly concerned about the proliferation of tables of the class rule I added new sets of rules. Given that I don't use any of the advanced features that offers of management rules on the Expression of basic filter functionality (for example the complex events), I'm looking for in a simple ExpFil of installation and use of the EVALUATION operator. This will allow me to store several rulesets in the same table of expressions (separated by a field of type or ruleset_id) and does not require as much structural work to add new sets of rules.
  
  Things seem to work very well in my first attempts, but I think that my main question is proc PROCESS_RULES of RM doesn't on the optimization of the assessment of the rules in the rule Manager - no additional optimization which is not offered by the basic functionality of ExpFil? Everything I do is a simple query to find the rules corresponding to a specific document:
  
  SELECT cr.*
  OF COMP_RULE_TEST cr, doct DOC_TABLE
  WHERE doct.doc_id = 123
  AND EVALUATE (cr. RULE_COND, FApprcomp.GetVarchar (doct.rowid)) = 1;
  
  Thank you!

  Hello

  Simple rules, there no notable performance only difference between Manager rules and filter expression. Please ensure that the indexes are created for the Expression column (they are automatically created for the rule Classes).

  Just to be complete: If you want to use several data structures and to define simple rules on the structures of the individual event, you can set a rule to structure class composite event and not really to define complex rules. For example, a rule configured for the table attributes class two alias, po and if maybe two simple rules that are associated with the simple event matching.

  Rule condition 1:
      
          
      
  
  Rule condition 2:
      
          
          
  

  For a new line in the associated table of attribute "po", rules defined with the name of the corresponding event are evaluated.

  Hope this helps,
  -Aravind.

• use of the server for executable files VI

  Hi all

  I tried to find a good explanation and example usage of VIserver to launch executables on client PC (XP) via a LAN to a PC (Win7) process controller. Basically, what I found for the controller is specified in this code snippet:

  

  The following was placed in the .ini file of the target at the time of construction to allow VIserver using an executable file (?):

  Server.TCP.Enabled = True
  Server.TCP.Access = "' + * '"
  Server.TCP.port = 3364
  Server.TCP.ACL = "290000000A000000010000001D00000003000000010000002A10000000030000000000010000000000"
  Server.VI.Access =""
  server.vi.callsEnabled = True
  server.vi.propertiesEnabled = True

  If a reference to an instance of application LV is open on the computer command on a specified port, and then a VI reference target

  for the .vi file (another instance?) opens on the same target for manipulation of knot VI. So what was lost for me is the executable

  I am trying to run the file. May not be wired to the terminal way to "ref Open VI". This implementation requires the .exe version and the version of VI

  I am trying to run the code? I launched with success of executable files over a LAN using plink with a script file. Problem is that I can't find a way

  get the target executables once loaded. There is most likely a C solution for this (I'll take it if anyone knows!), but since has VIserver of tools

  to control the execution, I would use it. Also, I want to understand the version of VI of the programme and the .exe in this case (s) link

  Version. Any help would be greatly appreciated.

  lb

  Ben OK,

  Your messages made me a technique to load with distance and running an exe file, built in LV8.5:

  1. to load: the controller emits a "tasklist" command to a target. The objective produces an output file of tasklist which is read by the controller. If it concludes that the target is already loaded, the controller will execute it with an invoke command node 'run a VI '.

  2. If the target is not loaded, then a script file is executed on the target via plink of the controller. This command will also start running.

  3. all the subVIs must reside on the target, as you said, even if (as in my case), the target has no LV Developer Suite installed. I placed Traoré versions of files and folders to exe in the same folder.

  4. the .ini file in the compilation has changed as shown in the first post of this thread. No special settings were used in the compilation.

  This probably isn't the exact technique you had in mind, but it doesn't seem to work... Thanks again for your help.

  lb