Photos will not send with the message.

When I try to send a message using Windows Live Mail with photos I get a message saying (one or more of the pictures in this message could not be found.) When you send this message, these photos will not be included. "Are you sure you want to send this message?) Yes or no if yes, some people have photos but in a different format as a message where they are not supposed to be. The Geek Squad at best buy didn't. If type of ruins a good joke, if the image is not included. I thank Bill

Sounds like your transfer this / these jokes and does not not enamel photo?

http://answers.Microsoft.com/en-us/search/search?searchterm=forwarding+pictures+not+sending&CurrentScope.ForumName=windowslive&CurrentScope.filter=LIVEmail&askingquestion=false

Tags: Windows

Similar Questions

  • When I try to send an e-mail with attached pictures, I am told that the photos will not appear in the e-mail message.

    When I try to send an e-mail with pictures, a pop-up window appears when I hit SEND and says that the photos will not appear in the e-mail message.  How can I fix it?

    original title: e-mail problems.

    Hello

    I suggest that ask you your question on the following link.

    http://answers.Microsoft.com/en-us/windowslive

  • 2602AP will not register with the 5508 controller

    Hello all-

    We have a 5508 controller that manages the HA to about 20 branches - each branch has its own subnet. We have a single branch (subnet) with new 2602 AP who will not register with the controller. All communications to that subnet appear normal and there is no ACL in place between the AP and the controller. The AP is able to resolve the IP address of the controller via DNS and start the registration process, but then timeout. We have installed 2602 AP successfully to other areas of the branch and they fit without any problems - it is a problem only in one branch. I have attached a few debug messages below for a single point of access (it's a production environment, so I analyzed useless info) and also included messages from the console to a different access point (the console AP messages are the same). There are currently 9 AP here and none of them will record this. Any ideas?

    Capwap debug events:

    * spamApTask0: 11 Dec 14:39:32.904: 44:2 b: 03:9 has: Discovery d1:10 request 10.29.9.190:44306

    * spamApTask0: 11 Dec 14:39:32.904: 44:2 b: 03:9 has: d1:10 join priority Processing status = 0, priority 1 of incoming Ap, MaxLrads = 300, joined Aps = 272

    * spamApTask0: 11 Dec 14:39:32.904: 44:2 b: 03:9's: Discovery d1:10 response to 10.29.9.190:44306

    * spamApTask0: 11 Dec 14:39:32.904: 44:2 b: 03:9's: Discovery d1:10 response to 10.29.9.190:44306

    * spamApTask0: 11 Dec 14:39:32.992: 44:2 b: 03:9 has: d1:10 DISCOVERY LWAPP APPLICATION received at 68:ef:bd:8e:48:6f on port "13"

    * spamApTask0: 14:39:32.992 Dec 11: Discovery 44:2 b request: 03:9 has: d1:10 elements in LWAPP of AP supporting CAPWAP

    * spamApTask0: 14:39:42.903 Dec 11: connection of DTLS 44:2 b: 03:9 has: d1:10 not found, creating new connection for 10:29:9:190 (44306) 10:5:13:4 (5246)

    * spamApTask0: 14:57:52.301 Dec 11: DTLS closed connection events receivedserver e8:ba:70:dc:d1:c0 (10:5:13:4 / 5246) client (10:29:9:190 / 44306)

    * spamApTask0: 11 Dec 14:57:52.301: e8:ba:70:dc:d1:c0 no entry there for AP (10:29:9:190 / 44306)

    * spamApTask0: 11 Dec 14:57:52.301: e8:ba:70:dc:d1:c0 entry no. AP exist in the temporary database for 10.29.9.190:44306

    * spamApTask0: 11 Dec 14:57:53.828: 44:2 b: 03:9 has: Discovery d1:10 request 10.29.9.190:44306

    * spamApTask0: 11 Dec 14:57:53.828: 44:2 b: 03:9 has: d1:10 join priority Processing status = 0, priority 1 of incoming Ap, MaxLrads = 300, joined Aps = 272

    * spamApTask0: 11 Dec 14:57:53.828: 44:2 b: 03:9's: Discovery d1:10 response to 10.29.9.190:44306

    * spamApTask0: 11 Dec 14:57:53.828: 44:2 b: 03:9's: Discovery d1:10 response to 10.29.9.190:44306

    * spamApTask0: 11 Dec 14:57:53.916: 44:2 b: 03:9 has: d1:10 DISCOVERY LWAPP APPLICATION received at 68:ef:bd:8e:48:6f on port "13"

    * spamApTask0: 14:57:53.916 Dec 11: Discovery 44:2 b request: 03:9 has: d1:10 elements in LWAPP of AP supporting CAPWAP

    * spamApTask0: 14:58:03.824 Dec 11: connection of DTLS 44:2 b: 03:9 has: d1:10 not found, creating new connection for 10:29:9:190 (44306) 10:5:13:4 (5246)

    Debug Capwap errors:

    * spamApTask0: 11 Dec 15:17:33.715: e8:ba:70:dc:d1:c0 abolition PT 10.29.9.190 which has not been surveyed

    * spamApTask0: 11 Dec 15:17:33.716: e8:ba:70:dc:d1:c0 DTLS connection has been closed

    Debug Capwap Details:

    * spamApTask0: 11 Dec 15:24:29.419: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

    * spamApTask0: 11 Dec 15:24:35.542: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

    * spamApTask0: 11 Dec 15:24:41.555: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

    * spamApTask0: 11 Dec 15:24:49.555: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

    * spamApTask0: 11 Dec 15:25:29.420: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

    * spamApTask0: 15:25:29.420 Dec 11: connection of DTLS 44:2 b: 03:9's: d1:10 0x1a1703c8 closed by controller

    * spamApTask0: 15:25:29.421 Dec 11: msg closed connection CAPWAP DTLS

    Journal of the Console from the AP:

    Translate "CISCO-CAPWAP - CONTROLLER.ad.pps.k12.va.us"... the domain server (10.29.8.3)

    * 00:00:57.511 Mar 1: % 3-CAPWAP-ERRORLOG: did not get the server DHCP server log settings. [OK]

    * 00:01:10.511 Mar 1: % 3-CAPWAP-ERRORLOG: go join a capwap controller

    * 16:05:56.000 11 dec: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.5.13.4 peer_port: 5246

    * 16:06:17.495 11 dec: % CDP_PD-2-POWER_LOW: all disabled radios - NEGOTIATED WS-C3560E-24PD (68bc.0c03.8015)

    * 11 Dec 16:06:28.231: DTLS_CLIENT_ERROR:... /CAPWAP/base_capwap/DTLS/base_capwap_dtls_connection_db.c:2051 retransmission count Max reached!

    Kern of logging mechanism

    ^

    Invalid entry % detected at ' ^' marker.

    emergency logging trap

    ^

    Invalid entry % detected at ' ^' marker.

    Kern of logging mechanism

    ^

    Invalid entry % detected at ' ^' marker.

    emergency logging trap

    ^

    Invalid entry % detected at ' ^' marker.

    * 16:06:55.999 11 dec: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 10.5.13.4:5246

    * 16:06:55.999 3 dec: % CLIENTERRORLOG-3-LWAPP: LWAPP LED Init: incorrect led State 255

    * 16:07:06.367 11 dec: % 3-CAPWAP-ERRORLOG: go join a capwap controller

    * 16:07:07.000 11 dec: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.5.13.4 peer_port: 5246

    * 11 Dec 16:07:39.151: DTLS_CLIENT_ERROR:... /CAPWAP/base_capwap/DTLS/base_capwap_dtls_connection_db.c:2051 retransmission count Max reached!

    Kern of logging mechanism

    ^

    Invalid entry % detected at ' ^' marker.

    emergency logging trap

    ^

    Invalid entry % detected at ' ^' marker.

    Kern of logging mechanism

    ^

    Invalid entry % detected at ' ^' marker.

    emergency logging trap

    ^

    Invalid entry % detected at ' ^' marker.

    * 16:08:06.999 11 dec: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 10.5.13.4:5246

    * 16:08:06.999 11 dec: % CLIENTERRORLOG-3-LWAPP: LWAPP LED Init: incorrect led State 255

    * 16:08:17.367 11 dec: % 3-CAPWAP-ERRORLOG: go join a capwap controller

    * 16:08:17.000 11 dec: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.5.13.4 peer_port: 5246

    *Dec 17 15:53:47.463: %CAPWAP-3-ERRORLOG: Selected MWAR 'IRC-WLC-5508'(index 0).

    *Dec 17 15:53:47.463: %CAPWAP-3-ERRORLOG: Go join a capwap controller

    *Dec 17 15:53:47.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.5.13.4 peer_port: 5246

    *Dec 17 15:54:23.131: DTLS_CLIENT_ERROR: ../capwap/base_capwap/dtls/base_capwap_dtls_connection_db.c:2051 Max retransmission count reached!

    Get much better.

    WAP has selected the 5508 with good firmware.  WAP sends a JOIN request to 10.5.13.4 but cannot recover anything.

    Firewall?  Routing loop?

    What so-called "remote site", how is it connected to your office?  Dark fiber?  INTERNET SERVICE PROVIDER?

    You know what?  Can you post the output in the following commands:

    1 WAP: sh of stocks;

    2 WLC: sh sysinfo

    Nuts, I should already posed for these info before.

  • Microsoft LifeChat LX-3000 will not work with the yahoo chat

    Microsoft LifeChat LX-3000 will not work with the chat of yahoo, but works very well for the team talk and evacuate the systems of conversation, but for some reason he saus that's compatible with windows Word 7 and he rejects as a microphone?

    Microsoft LifeChat LX-3000 will not work with the chat of yahoo, but works very well for the team talk and evacuate the systems of conversation, but for some reason he saus that's compatible with windows Word 7 and he rejects as a microphone?

    The LX-3000 is compatible Windows 7... get the driver from the website of Microsoft Hardware...
     
     
    When you have installed the drivers, open Yahoo Messenger, go to help > configure video and voice...

    Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

  • 13 elements will not work with the new camera, it will not be updated raw 8.7.1

    13 elements will not work with the new camera, it will not be updated raw 8.7.1. I downloaded the patch, installed, but the old version is it in elements. Thank you, esther

    Try again a little later. Sometimes the Adobe servers are busy. If you get the same answer, you may need to uninstall and reinstall. Try an alternative link, then confirm with your 24-digit serial number - click here to download PES

  • my photo does not work with the screen saver

    Photos has never worked on Apple TV 4 until today with the 032116 update, but my pictures does not work with the screen saver.

    I dare you to try to tell me how to make it work. Please have a solution, someone.

    Given that Apple isn't really care or help on these forums, it would be great if someone mentioned the steps.

    Thank you

    Can you elaborate on the question?

    These are user forums and this is why you will not see the participation of Apple here

  • My Windows Live account will not send or receive messages

    I have the problem that is described in the KB2842520 - see below. I do not use Outlook.

    However, the fix for the register suggested in the Knowledge Base does not match my registry entry, which is as follows: -.

    What should I do to get rid of the problem? He worked under Windows Live Essentials 2012, but has since ceased and is now a hard foul. No response to * address email is removed from the privacy * please, because it is not good to my Windows Live login id, as it IS the problem!

    I just realized that my title should say "will not send" rather than "send" - silly me.

    I fixed that for you.

    the data value is MBI and not MBI_SSL

    Only the difference is clearly not negligible if the removal of the value gets the job done. However, it does mean that all instructions for users of W7 should be changed. Thank you.

    Perhaps you could tell me what hoops to jump through

    Basic steps:

    1. Use your browser to access SkyDrive. Sign in with a Microsoft Account - one you use to connect to the Microsoft Community site will be good.
    2. Click on the public folders, then on download in the command bar.
    3. Find and double-click the filename of the image you want to use.
    4. When the download is complete, right-click on the recently downloaded file, and then select view original. The image is displayed in a new page.
    5. Right-click on the image and select copy.
    6. Back in your post in the forum, click where you want the image appears and select Paste.
  • New version will not work with the yahoo toolbar. How can I solve this problem?

    I downloaded the new version of Firefox, and it will not work with my yahoo toolbar more. It worked fine until I updated to the new version. I went back to the old version 16.0 and now he repeats to me my version is obsolete. How can I solve this problem and get the new version to work with my yahoo toolbar?

    To start, make sure you have the latest Yahoo toolbar.
    http://help.Yahoo.com/kb/index?page=content & y = PROD_TOOL & local = en_CA & ID = SLN5044 & print = false

  • computer will not start with the disc

    I use vista and my computer does not start because of a corrupted file.

    I put my vista disk in such suggested, but the screen does not move any command of keys to press and just goes round in a loop. So I can't the computer to start and fix.

    I changed the bios to boot from the cd as first choice but still no results.

    can anyone help?

    Could it be that the disk driver does not work like the disk isn't loading? Or the disc will not load because the press any key order is not coming?

    I am old enough and not very technically experienced but this computer has served me well and I have a lot of information that I need to go down there if I have to buy another.

    Any help would be greatly appreciated.

    If you have correctly setting the boot order in the BIOS to CD/DVD first, and the computer does not start, your problem has nothing to do with the driver for the CD/DVD drive. Also running in safe mode or SFC can maybe help you.

    The reason that pilots, safe mode and FCS can help you is the same for all three: boot (if from the hard drive or a CD or DVD) takes place before loading Windows. If it boots from a CD or a bootable DVD, the problem has nothing to do with Windows. It's a hardware problem. I don't know what the problem is, but it is possible that the CD/DVD drive is dead.

    What is wrong can but fixable, but whether it is cost-effective to do so is another matter. It depends on what the problem is. If the CD/DVD player, they are inexpensive, so replacement should not be expensive. Fortunately, it's not like there is a problem with the hard drive, so even if you buy a new computer, you must be able to remove the hard drive from the old computer, put it in an external enclosure and to transfer the data to the new computer.

    Let me add another point: you say "I have a lot of information that I need to get off it if I have to buy another." This suggests that you don't regularly back up your data on an external support. If this is the case, you've played with fire. It is always possible that a hard disk crash, the user error, close to love at first sight, virus attack, even stolen computer, can result in the loss of everything on your drive. As it has often been said, it is not a question of whether you will have a problem, but when.

  • InDesign objects are not locked and will not move with the mouse click.

    I rebooted, uninstalled and reinstalled. Objects interact with when the mouse is clicked. The contours of the block came and the object can be selected and changed, however it will not move with a mouse. Objects respond to the arrows when the issue is raised; but it's heavy at best.

    I gave in my computer image. What was the origin of the problem, is now gone. Thanks for your help.

  • Nested tables will not align with the primary table


    Hi all. Looks like I am facing another obstacle focus on the table. While I was creating one of my pages, I used nested tables to create a column on the left side of the page that will contain my menu secondary, while the other column will hold a flash element and the content of the page.

    Although I have inserted tables nested with a spacing of the cell '0' and '0' cell padding and Visual AIDS seem to indicate that the values in the nested table are identical with the primary table who is the holder, the nested table that will contain the film and the page content is not embedded with the table above. It seems to be off by 1-2 pixels or more, but since there will be a right on the image under the menu is quite obvious.

    I enclose the code for your information (line 165, 166).

    Thank you for your time and your suggestions. I really appreciate it.

    Saturday, September 16, 2006 15:06:50 + 0000 (UTC), "HTML-Newbie.
    wrote:

    > Discover the link http://www.fastventures.com/dev/test_temp_2col.html and you
    > see the picture under the main menu align with her on the
    > right side.

    Change this:




    To do this:

    <>
    SRC = "img/place_second.jpg" width = "572" height = "200" > "

    align = "right" >

    <>
    SRC = "img/place_second.jpg" width = "572" height = "200" > "

    Gary

  • Thunderbird will not send or receive messages from my Yahoo account more. Tried all the usual change password stuff. Help please.l

    Thunderbird has been very well for a few years. On occasion, he would give me the message "failed to open a session" and I just hit "Try Again" and everything was fine. Suddenly, all is not well and I can't do is resolved. Tried to delete and to have to retype (PW is OK) but nothing seems to work. Help, please.

    To diagnose problems with Thunderbird, try one of the following:

    • Restart Thunderbird with disabled modules (Thunderbird Safe Mode). On the Help menu, click "restart with disabled modules. If Thunderbird works as usual, there is an add-on or theme interfere with normal operations. You will need to reactivate the modules one at a time until you locate the offender.
    • Restart the operating system in safe mode with network. This loads only the basics needed to start your computer while allowing Internet access. Click on your operating system for instructions on how to start in safe mode: Windows 8, Windows 7, Windows Vista, Windows XP, OSX
    If the safe mode for the operating system to resolve the problem, there are other software on your computer that is causing problems. The possibilities include but not limited to: AV scanning, virus/malware, background downloads such as updates of the program.
  • Creative programs will install but will not open with the same error message

    Hello thank you guys for any help you can provide.

    I installed creative cloud and install a few programs. None of the programs opens and I get the same error message for each of them.

    Adobe first Pro CC 2014 cannot be opened because of a problem.

    Check with the developer to ensure that Adobe first Pro CC 2014 works with this version of Mac OS X. You may need to reinstall the application. Don't forget to install the updates that are available for the application and OS X.

    Click report to display more detailed information and send a report to Apple.


    All creative programs say they are up-to-date. They have not been registered as I could not opened a still. I'm running one ate 2014 MBP with a 2.8 i7 processor, 16 GB of ram and an SSD 1 TB with 600 GB of free space.


    I uninstalled the programs and have reinstalled with the same result. I also followed solutions to other problems for programs starting or loading, without success. Any help to solve this problem or the direction of a former validated solution would be greatly appreciated.


    Thank you



    Do as he says - click on the button and provide the detailed information.

    Mylenium

  • Workstation XW4300: xw4300 will not work with the recommended graphics card (Nvidia Quadro FX 3400)

    I installed a graphics card hoping to update my computer.  The Nvidia Quadro FX 3400 was the highest assigned

    graphics card recommended for the workstation xw4300 system HP specifications page.  My system

    has a 460W power supply and I connected the cable 6-pin on the map and the map pins in the PCIe x 16 slot where

    the old card was.

    When I turned on the machine, I don't have even get a bios message or welcome screen.  All black.  But on all 10

    seconds, the power would cycle off and then come back.  HP says that this map is supposed to work with my machine!

    This card appears, making it non-functional.

    Any ideas?

    I ended up going with the Nvidia Quadro FX 1400 card.  He is listed as 75W and the map of 'medium' recommended for this xw4300 system.  I paid 10 dollars for it on eBay and it works great.  Do not use the Quadro FX 3400 map even if it is recommended by HP for this machine.  Food can't support.

    A witch hunt.  Equipment old and new software don't always play nice.  My machine has a new installation of Windows 7 Pro 64 bit on it, and running Windows Experience Index gives me the blue screen of death.  I put a meter on the power during the test problems... No..  It's a kind of driver incompatibility.  Win 7 says that the driver is the last, but he chokes on the

    test the index.  Funny irony is that I ran other tests which include benchmarking 3D rendering and nothing, but the Microsoft Windows Experience Index test stifles this card.  How about you do not run the Microsoft test to improve my Windows experience.  :/  Go figure.

    This card is older hardware, and because of that I don't have hope than Nvidia or Microsoft to make Windows experience test runs correctly with win7 64 OS.  Sounds like HP.

    Here's the kudo: the guy on eBay who I bought the card quickly refunded my money when he learned about the Blue error screen of death in Windows performance index test, so I did a free card.  I'll send her money

    Back to him.  I've never met anyone so accommodating.  These companies could take a lesson from that on what customer service means.  That's how you get regular customers.

  • Files and folders-photo will not delete, keep the reproduction

    Windows XP, Internet Explorer 8,.

    I try to delete multiple photos and whenever I hit ctrl, hold down the key and left click on photos, remove, they breed

    and now I have more than 68 copies of less than 10 images, help!

    Windows XP, Internet Explorer 8,.

    I try to delete multiple photos and whenever I hit ctrl, hold down the key and left click on photos, remove, they breed

    and now I have more than 68 copies of less than 10 images, help!

    ==============================================
    Unwanted copies have file names with
    copy "prefix of"?

    Example: Copy of IMG_1455.JPG

    If_yes_maybe the following tutorial, I wrote
    for XP offers a few ideas:

    Also... There is a link to another method
    at the end of this tutorial.

    Here's how to reproduce the unwanted
    copy of...

    Hold down your CTRL key and select multiple files...

    Place your pointer over the selected group
    (holding the key ctrl) and left click / drag
    the group even just the slightest bit... now
    release the mouse button.

    Oooops... multiple copies...

    Maybe the following will help:

    Sometimes most of the person who
    trying to select multiple by holding the CTRL
    or the SHIFT key down while clicking on the left to select the
    image files.

    Copies are created when you are unable to
    completely release the mouse button before
    you move the pointer to another file. When a group
    the selected file is dragged... even the slightest
    release the mouse button will produce a bit...
    copies of all the files previously highlighted.

    It's a little easier if you have your folder
    Options set at single click... that way you can
    select/deselect a file with just a mouse more
    and you don't have to click. For multiples you
    I have to keep... CTRL or Shift.

    Do not click on... no slip... no copy... maybe that of
    your solution. To adjust the click...
    Open a folder and go... Tools / folder
    Options / General tab... Check... 'single click '.
    To open an item"/ apply / OK.

    If you want to delete all the files in a folder
    You can try the following:

    Reach... Edition / select all... or type... CTRL / has...

    With all of the files selected... go... Drop / delete...
    or press your delete key... or... click on the
    Group and choose 'delete '.

    How do I find and remove unwanted 'copies '.
    of your image files.

    Open the folder that the images are saved in and
    on the left, click on the button 'Search' in your toolbar.

    (If you view the files from a montage
    program and do not know where the record is... right
    Click on one of the image files and the menu...
    choose... Properties. The path to the folder will be
    in the tab 'General' to 'Place').

    In the research pane select... "All files and folders".

    In the "All or part of the file name" field. Come in...

    a copy of

    Now... on the left, click on the search"" button.

    When the search is complete... go to... Edition / select all...

    Then go to... Remove / delete.

    You will see a dialog box asking if you are sure
    you want to delete the files, click Yes.

    Now... on the left, click on the 'Back' button in your toolbar.

    Now the remaining files should be your originals.

    If you delete the wrong files... recover from
    your basket now.

    Also see the following article:

    Trouble fixing: stop Windows copy
    Files accidentally when Ctrl-click selecting
    http://www.howtogeek.com/HOWTO/Windows-Vista/fixing-annoyances-stop-Windows-from-copying-files-accidentally-when-CTRL-click-selecting/

Maybe you are looking for