Photosmart 130 for windows 7, had to install a new driver, now its photosmart 330. I followed the instructions but it will not print an image of the computer.

Similar Questions

• Upgrade of Windows 8 has changed my graphics card driver, & now I get vertical bars on the screen.

  Upgrade of Windows 8 has changed my graphics card driver, & now I get vertical bars on the screen, sometimes flashing. It is sometimes difficult to use the screen, especially when it has a dark background. It is a HP Desktop quad core with card Nvidia GEForce 9600.  I tried to roll back the driver, but that didn't help. I assume that the driver I need is no longer available. I also went to Nvidia to try to find a better driver that would eliminate this problem, but no luck.  Before, this came with an update on Vista, & I could correct in the way to roll back the driver. Any help would be appreciated.

  Go to www.nvidia.com and download the WHQL 306,97 drivers updated successfully.

  With the installation of Windows 8, Microsoft provides only the "bare" minimum drivers in order to complete the installation of Windows.

• my photoshop but has its disk failed and had to install a new drive. any way to download it again without having to buy it again?

  My wife has photoshop but the install a new drive. It is downloadable somehow without having to buy it again?

  Hi josephk75334669,

  Please let us know what version of Photoshop, you must download it to.

  You can download the stand-alone versions of: other downloads

  If it was Photoshop Creative Cloud then use the following link: Adobe Creative desktop Cloud | Adobe Creative Cloud

  Kind regards

  Sandrine Bani

• HP Photosmart 7760 was working fine but suddenly will not print

  Original title: HP Photosmart 7760

  HP Photosmart installed at the HP Pavilion g7 by my computer tech station - has worked well for a few days.  Today, he will not accept a print command.  Everything seems to be connected correctly. What should I do?

  Hi bakers.

  1. what operating system is installed on the computer?
  2. do you get an error message?

  Try the steps from the following links:

  Printer in Windows problems
  http://Windows.Microsoft.com/en-in/Windows/help/printer-problems-in-Windows

  Why can I not print?
  http://Windows.Microsoft.com/en-in/Windows7/why-cant-I-print

• Photosmart Plus B210a will not print on the Windows XP computer, but works on the Windows 7 computer

  I just got a Photosmart Plus B210a printer. I was able to install it using the wireless for my Dell Dimension 3000 3 GHz computer with Windows XP 32-bit SP3. He will answer analysis, but it will NOT print, it doesn't matter what I do. I have a Netgear wireless router. I tried the Dell connected directly to the router using a USB of Netgear WG111v3 USB adapter and cable. No impression whatever the configuration.

  On the other hand, I was able to make the printer work with an Athlon II X 4 630 with Windows 7 Professional 64 bit AMD machine. Everything works independently to know if the machine is connected directly to the router Netgear or using the above USB adapter.

  How can I make work B210a with my Dell with Windows XP? Is this a problem XP because Windows 7 has worked perfectly, but Windows XP would only scan.

  Subsequently, I deleted all initially loaded B201a software. At the printer detects the network, then reloaded the software from the CD. The printer then worked fine. What a relief. Perhaps the problem I had previously was linked to my trying to use the USB port when the printer originally did not work.

• HP Photosmart 2610 says that it will not print, because the transport is stuck, but it is not

  my HP Photosmart 2610 all-in-one, said that he will not print because the transport is blocked. Well, he is not stuck. Yet, I can't print. I printed close to 20 000 cards because I bought and installed printer. What should I do? can you recommend a printer to buy. Looks like it's ready for the 'OS' yard HELP.  PAUL LACNY * address email is removed from the privacy *.

  Hello

  Perhaps he is worn and requires little (routine) maintenance (20,000 sheets is a lot of printing).

  As OEM HP is responsible for the good operation of the printer and their drivers. Check with
  HP support, their documentation online and drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  There are three models, so enter-> Photosmart 2610 - in the link of the HP driver and select the version
  you have - then select your version of Windows.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Photosmart 5520: Will not print in black ink

  I did an interview on the print head, but it will not print in black. All other colors are fine and the ink is full so please tell us what can I do?

  Hey @Hughes23,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with printing in black of your Apple devices to your 5520 Photosmart e-all-in-one printer. I can help you with that.

  This document describes How to solve print quality problems with your printer. If you access all the steps to ask you to replace the cartridge or the printer service, instead contact the HP support directly. You can do this by clicking on this link and fill out the form below to discuss the options based on your warranty.

  If this allows you to print, please let me know by clicking on accept Solution below my post. Also, I would like to know if you have any other questions. If not, have a great week!

• Sipder solitaire for Windows XP can be installed under Windows 7?

  Sipder solitaire for Windows XP can be installed under Windows 7?  My wife loves the old version better.  Thank you!

  Hi Hopeless1,

  Welcome to the Microsoft answers site.

  These are games that are embedded within the operating system; Unfortunately, it is not possible to make the Spider Solitaire Windows XP installation on the new Windows 7 computer.

  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• A security update for windows THAT XP cannot install (KB2707511). Code received the error 0x80076BE. How to install this update?

  A security update for windows THAT XP cannot install (KB2707511). Code received the error 0x80076BE. How to install this update?

  Hello

   
  You are able to install other updates successfully?
   
  See the methods mentioned below and check if that helps.
   
  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State
  
  http://support.Microsoft.com/kb/310353

  Note: After completing the troubleshooting steps in the clean boot, follow steps to configure Windows to a Normal startup State of the link section to return the computer to a Normal startup mode.

  Method 3: Follow the steps in the article.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058
  Method 4:
   
  You cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after installing Windows XP SP3 immediately after a clean installation of Windows XP SP2 or
  http://support.Microsoft.com/kb/943144
  Hope this information helps.

• Security update for Windows XP (SP3) KB977914 install, error Code: 0xD0000135. Can someone provide a fix?

  Security update for Windows XP (SP3), KB977914, install, error Code: 0xD0000135.

  Can someone provide a fix for the error Code: 0xD0000135? I tried to update 5 times since 09/15/11.

  Thank you very much.

  Cynthia

  Hello

  first of all – have you tried to download and install this update manually? If this isn't the case, you can download it from here (the good language):

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=16170

  LC

• My computer installed all updates for Windows (I was invited to do so). Now, I can not use citrix to access things. Frustrating

  My computer installed all updates for Windows (I was invited to do so).  Now, I can not use citrix to access things. Frustrating

  Supported Citrix or your COMPUTER administrator will be able to help with this.

  Look in the event log to see if anything relevant is registered.

  John

• I realized that I had a message to update for a while then when I checked, I found that the app CC was missing. I downloaded and installed the application, but it will not update of software. In the creative cloud Panel, the only options I get are the Hom

  I realized that I had a message to update for a while then when I checked, I found that the app CC was missing. I downloaded and installed the application, but it will not update of software. In the creative cloud Panel, the only options I get are the Home tab to check the activity and the Stock tab. The applications tab is missing. How can I get that back so I can update photoshop and lightroom?

  Please, try the steps mentioned here https://helpx.adobe.com/creative-cloud/kb/apps-panel-reflect-creative-cloud.html

  Let me know if it works!

• Windows Installer keeps trying to install msi.status but it will not install

  Windows Installer keeps trying to install msi.status but it will not install and I think he got the other updates to the installation.  How difficult or get rid of it?

  Hello
  In my view, that it is a software HP printer problem. Please, try the following:

  If you have the HP software on your PC support (printers, etc.)
  the disc when the pop-up window displays a location '1'. Click Browse
  then open the HP disc in the CD drive. A named icon status should
  appear. Click on this icon and load. This will get rid of the
  Status.msi loop.

  If you do not have the original disc. Uninstall HP Photosmart all-in-One Driver software and HP update program - then only reinstall the HP Photosmart all-in-One Driver software. Do not update, just live with it. The web link for the full features of the software download is provided below.

  http://h10025.www1.HP.com/ewfrf/wc/s...duct=320478 5

  I hope this helps Mark <> Microsoft Partner

• Had to reformat my hard drive, now when I try to reinstall Windows XP I get a blue screen with this code at the end 0x0000007b.

  has had to reformat my hard drive now when he star0x0000007b (0x78d663c, 0xc0000034, 0x00000000, 0x00000000)

  has had to reformat my hard drive, now when I try to reinstall windows xp, I get a blue screen with this code at the end 0x0000007b (0x78d663c, 0xc0000034, 0x00000000, 0x00000000) how to solve this problem

  Hello

  I saw the 0x0000007B BSOD caused by trying to install XP on a disk hard while the BIOS is designating the reader as AHCI instead of IDE. XP has no native AHCI drivers, resulting in a stop 7B. Unless the PC had originally Vista or Win 7, but it might be useful to check that it is not likely.

  If the BIOS is set to AHCI, you could do one of three things (depending on whether your PC has a floppy drive)...

  1 find the Setup F6 disk on AHCI support at installation time (start with the manufacturer's website if you do not already have such a thing). Watch the very hit F6 prompt early in the installation process.

  2. change the setting in BIOS on IDE / ATA

  3. create a new "slipstreaming" installation disc drivers AHCI in the existing installation disc, see http://www.nliteos.com/index.html

  After the back if your BIOS is IDE / ATA

  Tricky

• Brother HL-2240 printer will not print after installing Windows.

  original title: MS upgrade on Windows XP

  Help, please.  I installed the recent update of MS for XP and now brother HL-2240 printer will not print.

  KB982670 seems to have something to do with .NET Framework 4 Client Profile.  This update or Windows PowerShell have been updated "critical", then maybe you didn't need to get.  However, it's water under the bridge now.

  When you open the print queue, are shown print jobs as stuck there?  Just to make sure that the queue is cleaned, do the following:

  Open a command prompt window (start > run > cmd > OK)
  Type each of the following commands in the command prompt window and press ENTER after each line

  • net stop spooler
  • del "% windir%\system32\spool\PRINTERS\*.*" {answer Y when prompted}
  • net start spooler
  • output

  It's really only a shot in the water, but he could help and can not hurt to completely uninstall and reinstall the printer.  Follow the directions here: http://www.coribright.com/windows/Article_One.htm

  Get the complete installation package here: http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/dlf/000000/004500/dlf004515.html?reg=us&c=us&lang=en&prod=hl2240_us_eu&type2=1&os=7&flang=4&dlid=dlf004515