Photosmart 3100 series causes of program crashes

Similar Questions

• .png file causes the program crash after playing two seconds of video.

  Whenever I have a .png file with 2 video files it says program does not, then after a few seconds it crashes when video plays in comp. This is a really annoying error I tried to correct for the last 3 hours.

  I'm this tutorial: Adobe After Effects - Glitch Tutorial - YouTube

  Here is a video of what happens: Dropbox - 20150604_110918.mp4

  I realized that it was the .png file, because when I took on this worked. I tried to put a smaller .png in the video, but diddnt work either. I have no idea why this is happening and I even tried to run it on my other computer and it does the same thing.

  I hope that someone will know what is happening.

  Thanks in advance!

  The problem is not with the .png file, this is the bug screen - Free Stock Footage.mp4 file. It is all dirty upwards and blocks almost all applications that I am looking to use to render a new copy. Just open the MP4 in Quicktime format you get something that resembles images for the first 2 seconds and then it freezes just give you this:

  

  It is a corrupted video file, and this is what is causing your problems.

• Setup error printer all-in-one HP Photosmart 3100 that it's incompatible.

  Original title: program programs application Applications compatibility

  I have a new computer with Windows 8.  I am trying to install my HP photosmart 3100 series all-in-one printer and it tells me that it is incompatible with this new system.  What should I do to install it?

  Hi Barbara,

  I understand that you are facing problems with the installation of your printer to your computer.

  1. where did you get the message that says that it is incompatible?

  2. do you get an error message when you tried to install the printer?

  I would like to inform you that the photo smart HP 3100 series all-in-one printer is compatible with Windows 8. You can see the following link to check the compatibility of the device with Windows 8.

  http://www.microsoft.com/en-us/windows/compatibility/win8/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=win8&Locale=en-us&TextSearch=HP%2Bphotosmart%2B3100%2B&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14

  Method 1:

  
  I suggest you download the latest driver for the printer form the below mentioned link and check if it helps.

  Download drivers and software

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=1146516&cc=us&TaskID=135&prodSeriesId=1146511

  If the problem persists, I suggest installing the driver in compatibility mode and check if that helps.

  You can follow the link given below to install the driver in compatibility mode.

  What is program compatibility?

  http://Windows.Microsoft.com/en-us/Windows-8/what-program-compatibility

  Make the programs more compatible with this version of Windows
  

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  Method 2:

  
  If the problem persists, you can view the following for more information Microsoft article.

  Solve printer problems

  
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Reference:

  Business Support Center

  http://h20000.www2.HP.com/bizsupport/TechSupport/home.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=439598

  This should solve the problem.

  If you have problems of Windows in the future, let us know and we would be happy to help you.

• 6520: problem starting c:\Program HP HP Photosmart 6520 series\bin\HPStatusBL.dll

  I uninstalled the HP 6520; didn't uninstall errors. [do not remember if I uninstalled with a 6520 uninstall exe or if I did it with Windows 10 uninstall programs.]  Now, every time I start my PC, I get an Error Message window indicating "there was a problem starting c:\Program HP HP Photosmart 6520 series\bin\HPStatusBL.dll the specified module could not be found."

  I have a Photosmart C7250 which is attached to my router via LAN as a network printer and works as it should.

  I would like to get rid of the Photosmart missing dll error, but, not at the expense of ruining the c7250.

  The 6520 file is missing, the 6520 has been correctly removed from devices and printers.  Why my PC is still trying to load a dll missing at startup after that the 6520 6520 was supposed to be uninstalled?

  How can I fix the error starting 6520 without spoiling the C7250?

  Hi @PineSap,

  Welcome to the Forums of HP Support! I see from your HP Officejet 6520 uninstalling you now this error message ' there was a problem starting C:\program HP HP Deskjet 1510 series\bin\HPStatusBL.dll .

  " The specified module could not be found ' at startup.

  After some research, I was able to find this solution on Forums, see below:

  For Windows 10 publication RunDLL error (HPStatusBL.dll) check this site:

  (Activate prior the hidden files and folders)

  C:\Users\(your user name) \AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup

  (Maybe depending on who has installed the software, see other users if you do not do so in your profile)

  Remove the shortcut that HP does not decently cleanup during uninstall:

  Monitor alerts of ink - HP xxxxxxxxxx -Source

  I hope that this helps, please let me know the results. I'll watch for your reply.

  Thank you for being a part of the community of HP. Please let me know if this helps solve the problem by marking this message as "accept as Solution" . If you need more assistance let me know and I will gladly do whatever I can to help. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

• When you try to open some sites Web my computer crashes and I get a message "a problem caused this program blocking interact with windows.

  Hello

  From time to time, I'm having a problem with internet access - when, finally, access is allowed and trying to open some websides my computer crashes and I get a message "a problem caused this program blocking interact with windows ' why?
  I'm not technically capable, but I did I tried different ways-nothing doesn't. I want to talk about Windows 7 Edition home premium.
  At the same time, there is no problem on my laptop which runs under Win XP and with the same internet provider! Any suggestion will be appreciated

  Original title: problems with Win7 and MozillaFirefox

  Hi Ulica,

  Thank you to contact Microsoft Community and we will be happy to help you with your concern.

  According to the description, it looks like you are facing an Internet problem on the Windows 7 operating system.

  It would be great if you can answer these questions to help you further.

  1. is the question confined with Mozilla Firefox?

  2 are you able to access the same Web site using Internet Explorer?

  3. have you made changes on the computer before this problem?

  4 are you facing this problem while accessing the secure Web site?

  Problem with Internet Explorer, I would suggest trying the following methods and check.

  Method 1:

  I suggest you add this particular website as a trusted site and check.

  To add a Web site to a security zone: http://windows.microsoft.com/en-US/windows7/Security-zones-adding-or-removing-websites

  Method 2:

  I suggest you to see the steps in the following Microsoft article and check.

  Can't access some Web sites in Internet Explorer: http://support.microsoft.com/kb/967897

  You cannot connect to or connect to secure in Internet Explorer Web sites: http://support.microsoft.com/kb/813444

  Why can't I view some websites? http://Windows.Microsoft.com/en-in/Windows7/why-cant-I-view-some-websites

  Note: There are rather than Internet Explorer 9 as well.

  Note: The feature reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Method 3:

  Internet Explorer not responding, stops working, or restarts: http://support.microsoft.com/gp/PC_IE_EnvManualID

  Note: If the question is limited only with Mozilla Firefox, I suggest you to post the same question in the Mozilla Firefox's Support Forums.

  http://support.Mozilla.org/en-us/questions

  Hope that the information provided is useful.

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• Photosmart all in a photo tray the 3100 series printer will not print 4 x 6 photos.

  Original title: Photo paper tray does not load

  I have a photosmart all-in-one printer 3100 series and the photo tray pledge is no longer for me to print 4 x 6 photos. I have to hand it to pass in the main paper tray. Help, please!

  Hello

  For any other help, I suggest you because it seems to be a hardware problem with your printer, contact HP support.

  Link HP Support: http://WWW8.HP.com/us/en/support-drivers.html
  

• Windows 8 - Photoshop CS5.1 crashes at startup. Error message: "Adobe Photoshop CS5.1 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. »

  Hello!

  I got the student version software Adobe Creative Suite 5.5 Design Premium for several years now.

  When I got my computer Windows 8 I installed the software without problem.

  Last week when I tried to open Photoshop, I get the following error: "Adobe Photoshop CS5.1 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. »

  I disabled and uninstalled all of the Creative Suite and then reinstalled. I am able to open other programs, but still the same message for Photoshop.

  What can I do?

  I found that the problem was with Nik filters I used. The filters have been messing around with Photoshop initialization. I uninstalled and reinstalled the filters and now Photoshop works like a charm.

  It seems that this forum is dead?

  Fortunately, I managed to solve the problems on my own and figured out the problem...

• Selection of preference caused program crash

  Bridge works well except that if I'm going in edition > Preferences, the program crashes.     Accepts all others - including camera Raw Preferences.Anyone suggest a solution please?

  Thanks in advance

  Bill

  Yes, it's a classic case where you need to reset your preferences.  Bridge closed, hold down the Ctrl key and launch Bridge.  You get a reset window, choose all 3 options.  Should be back in business.

• WMCentre Guide to program crashes.

  Win Media Center tuner - Tv, recorder and guide the programs all worked OK until recently. now the flicks program guide on briefly but causes then WMC crashing. Can view all channels by clicking on + and -. Cannot record screened only what is played.

  Can not find the cure promised at the time of the accident.   Have updated the driver. Convenience store said tuner works correctly.
  How can I repair the installation?

  http://mymce.WordPress.com/2009/11/13/how-to-rebuild-Media-Center-data-store-in-Windows-7-Media-Center/

• Error message: Windows Movie Maker program crashes when scanning film auto

  When I try to create an automatic video, film imports, but to the point at which the film is created, the program crashes, Windows looking for a solution, the program opens again and I get a message that a problem that caused Windows to stop working. Note: Windows does not crash; the movie maker does. Then the suggested solution is to download updates for Windows, but there is no update needed.

  The entire message is:

  Product

  Windows Movie Maker

  Problem

  Stopped working

  Date

  25/09/2010 10:43

  Status

  Solution available

  Signature of the problem

  Additional information about the problem

   

  Help!

  Bucket ID: 2037677096

  Problem event name: APPCRASH

  Application name: MOVIEMK.exe

  Application version: 6.0.6001.18494

  Application timestamp: 4c1a43fb

  Fault Module name: FlipDSVideoDecoder.ax

  Fault Module Version: 1.0.0.0

  Timestamp of Module error: 4c78442b

  Exception code: c0000005

  Exception offset: 00008f46

  The system version: 6.0.6001.2.1.0.768.3

  Locale ID: 1033

  Additional information 1: fd00

  More information 2: ea6f5fe8924aaa756324d57f87834160

  Additional information 3: fd00

  Additional information 4: ea6f5fe8924aaa756324d57f87834160

  Well, I was very happy when the program doesn't stop after following your advice and unchecking above named filter. But then, after it scans the file (which is a progress!), he says he cannot continue because one or more of the files contains a codec that is not supported by AutoMovie. I don't even know what a codec IS. I know who was Kojak, and I know what is Kotex, but what the heck is a codec and how do I get one?

  Thank you!

  ==================================
  Maybe the following article offers some ideas:

  "What exactly is"Codec"and why would I ever need it?
  http://netforbeginners.about.com/od/multimedia/f/codec.htm

  It is difficult to know what codec, you may need to because it
  is based on the format of your source files. And it is possible
  You may have some compatibility issues with one or more
  source files.

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv or dv - avi
  Music - wma, wav, wmv

  It may be interesting to try to download and install a codec pack...

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  * Proceed at your own risk *.

  K - Lite Codec Pack (full)
  http://www.filehippo.com/download_klite_codec_pack/ (the name of the file that you download is:)
  "K Lite_Codec_Pack_640_Full.exe")

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Do not print to the printer HP Photosmart 8200 series

  My HP Photosmart 8230 printer will not print. I used it very satisfatorially for 7 years. Recently, I had the same problem and after trying many suggestions of help without success subsequently discovered the problem was simply caused by a tick against printing offline in the box the printer queue. Again, I found printing enabled offline several times (not all) but remove the tick now does not correct the problem.

  I use Windows 7. HP Photosmart 8200 Series box shows the queue of work of printing normally, but with the error - printing under the State next to a print job. What is the error?

  Main menu > tools > print sample page the printer produces a normal sample of page indicating any fault in the printer.

  Seems that the problem is a lack of connection between my PC and the printer such as would be caused by the activation of printing offline in Windows 7 but not corrected by removing the tick as descrobed above.

  Any help would be welcome.

  Jeff Colwell ({private information deleted})

  The problem has been resolved by ininstalling and reinstall my HP Photosmart 8230. Much simpler today that when I bought my printer 8 years ago.

  Thanks for your attempt to be helpful.

  Jeff Colwell

• Internet Explore guard blocking cause listed APP CRASH under Windows 7

  New program installed on the new PC unit

  Also, at startup I get Bootmrg missing use CTRL = ALT = DELETE to restart

  * original title - my internet explorer keeps blocking cause listed APP CRASH. How I can corect it *.

  Hi don stevens,.

  Please see article with some useful information:

  http://blogs.msdn.com/b/ie/archive/2006/07/25/678113.aspx

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Random BSOD and program crashes, getting tired of this.

  I've probably become crazy trying to solve this problem and as soon as I try to let Windows search for a solution to these problem it gives me this * damned * * * error telling me that the problem is not possible, ironically, and now I'm distraught about what I'm supposed to do. In recent days, my computer started sporadicaly bluescreen and games crashing became regular events at this stage, as well as my sound card to randomly crash, requiring a reboot.

  Cazral

  7 different causes in 12 accidents.  Pointing to the corruption of memory.  I FIRSTLY run Malwarebytes, then so clean run the other two tests

  Please download the free version of Malwarebytes.
  Update immediately.
  Do a full scan of the system
  Let us know the results at the end.
  
  http://www.Malwarebytes.org/products
  These accidents were caused by the corruption of memory (probably a driver).  Run these two tests to check your memory and find which driver is causing the problem.

  * Don't forget to download any other DMP files (especially those running auditor)

  * If you are overclocking reset all default before running these tests.
  In other words STOP!   If you don't know what it means that you're probably not

  1 - Memtest.
  * Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. http://www.memtest.org
  * Boot from the CD and let it run at least 5 or 6 passes.
  * Don't forget, anytime Memtest reports errors, it can be bad RAM or a bad motherboard slot.
  * Test the sticks individually and if you find a good, test it in all slots.

  Any error is indicative of a memory problem.
  If a well-known stick fails in a slot of motherboard, it's probably the slot.
  
  2. Driver Verifier
  Using Driver Verifier is a dubious proposition. Most of the time it will crash and it will tell you what is the driver.

  * But sometimes it will crash and will not tell you the driver.
  * At other times it will crash until you can connect to Windows. If you can't mode without failure, then you will have to resort to editing the registry offline to disable driver verifier.
  * I would suggest that you first back up your data and make sure that you have access to another computer so you can contact us in case of problems.
  * Then do a system restore point (so you can restore the system using the functionality of Vista/Win7 Startup Repair).

  * Under Windows 7, you can do a startup repair disk by clicking Start... All programs... Maintenance... Create a system - with Windows Vista repair disc, you need to use your drive installation or from the "Repair your computer" option at the top of the Safe Mode menu.
  
  Here is the procedure:
  -Go to start and type "auditor" (without the quotes) and press enter
  -Select 'Create a custom settings (for code developers)' and click 'Next '.
  -Select "Select individual settings from the list complete" and click "Next".
  -Select the entire document except for "Low resource Simulation" and click "next".
  -Select "Select driver names from a list", then click "next".
  * Select all drivers that are NOT supplied by Microsoft and click on "Next".
  -On the next page, select "Finish".
  * Restart the system and wait as he crashed to blue screen.
  * Continue to use your system normally and if you know what are the causes of the crash, do it several times. The objective here is to get the system crash because Driver Verifier is stressing out the drivers. If it is not planted for you, then let it run for at least 36 hours of continuous operation.

  
  * If you are unable to Windows because it crashes too early, try safe mode.
  * If you can't mode without fail, try to use the system from the installation DVD restore to bring the system back to the previous point of restoration that you created.

  * Further reading
  http://support.Microsoft.com/kb/244617

• My photosmart 240 series is only an impression in red ink? CC = uk

  My Photosmart 240 series is only printing in red ink?

  The problem is your cartridge which is only printing yellow and magenta (red =).  Cyan is not printing.  You could check the cartrdige as an issue by gently dabbing it on a damp cloth.  This will cause a strong dark magenta and yellow blot, with maybe just a spot or not cyan at all.

• Program crashing

  I just upgraded from Premiere Pro CS3 to CS5.5 and I'm having a strange problem.

  Whenever I place my cursor at the bottom of the effects Panel, the program crashes. I don't even have to click on anything whatsoever, simply by placing the cursor at the bottom of the effects Panel happens - every time.

  Can someone please shed some light on this.

  I am running Windows 7 (64-bit) and have the required specifications.

  More information necessary for a person to help http://forums.adobe.com/thread/416679
  .
  Some are General on your computer and BONES, whatever specific to video editing
  .
  Build a http://www.piriform.com/speccy Configuration file
  .
  Computer brand/model (or make and model of motherboard if self-built)
  .
  How you installed, such as 2 gigabytes of system memory or?
  .
  Your security settings, such that YOU are the administrator
  - and have you tried to click with the RIGHT button on the program icon and select
  -l' run as administrator (for Windows, not sure about Mac) option
  .
  Your firewall settings and brand protection antivirus you are running
  .
  Make and model of graphics card, Susheel as "xxxx" or "xxxx" nVidia ATI
  -the make and model of graphics chip so or on the motherboard
  - and the version of the driver for the graphics card/chip above
  -how much video memory you have on your graphics card
  .
  Brand/model sound card, or sound 'chip' name on motherboard
  - and the version of the driver for the sound card/chip above
  .
  Format and configuration of your hard drive... example below
  - and how much FREE space is available on each disk (in Windows
  -You RIGHT click on the drive letter using Windows Explorer
  -then select the properties option to view the used/free space)
  .
  Indexing of Windows is BAD http://forums.adobe.com/thread/676303
  .
  While in the properties, make sure you have indexing left in car
  -for the reader and for all directories, to improve performance
  .
  Some/many of the above are available by going to the windows
  Control Panel, then the hardware option (Win7 option name)
  OR Control Panel - System - Hardware tab - device for WinXP Manager
  .
  And the EXACT type and the size of the file that is causing you problems
  -for photos, which includes the camera used and dimensions in pixels
  .
  Information specific to the video http://forums.adobe.com/thread/459220
  .
  Work through all the steps (ideas) at the http://forums.adobe.com/thread/459220
  .
  If your problem is not resolved after following all the steps, report with all OF THE DETAILS requested in the section at the

  Troubleshooting link