PhotoSmart 3210 All In One wireless network and does not know how to connect now lost.
Hi, I have a 3210 all in one Photosmart, and I can't find it on the network more.
I know that I've done worse of unistalling, reinstallation of the driver HP software and change the IP address of the printer. So I hope that someone can help me with this problem and return to the place where its still visible.
I have a PC with XP and a Mac with OS 10
Computers are both connected to the modem wireless cable router.
The printer is connected to the router via ethernet.
I can see the printer using a browser and entering the IP address of the printer. I can ping its IP address. The Mac can see the printer, but have installed the correct drivers to see (I think I can handle this, no need to worry about this yet).
The problem is that I can't see it in the "Add a printer" Wizard on the PC. So I can't add it to the PC.
I looked around the support of HP and they told me to uninstall the drivers and reinstall them. There was also mention of changing the IP address of the printer to a larger number, but that no longer works. So I went to the automatic assignment of an IP address to the address of the printer. And finally, I've seen mention to unplug the printer and by pressing 'ok' and 'Cancel' all plugging back in. He did a very long installation, but does not solve the problem.
I searched the forums for a solution and can not find one - so I've exhausted all help (Ive been on the forums enough to know to search before posting a question).
If Im not sure what to do next. Someone at - it suggestions? I don't really know what I can do to fix this problem: I'm sure it is just a corrupted file or bad setting somewhere I just do not know where he is.
Thanks in advance for any help.
For your Mac:
If you're running Snow Leopard, the driver for the 3210 is compiled. Open the applet Print & Fax under system preferences, then press [+] to add the printer. For other versions of Mac OS, download the driver from here and run the installer.
If you continue to have problems with the Mac, reset the printing system Mac and repeat the instructions above. Information about resetting your Mac printing system can be found here (http://support.apple.com/kb/HT1341)
For the PC:
The 3210 is on the network, we will try to add the printer manually. First verify that you can access the printer's internal web page by accessing its IP address or host name. You can find the IP address and the host name by printing the network configuration page.
Here is the sequence of manual installation of the printer driver for XP:
1. click on the 'Start' button--> printers and fax machines.
2. under print jobs, click on "add a printer".
3. click on 'Next' on the Add Printer Wizard window.
4. Select "local printer attached to this computer. Deselect "automatically detect and install my Plug and play printer." Click "next".
5 under, select a Printer Port option, select "Create a new port" and choose "Standard TCP/IP Port" and click "Next".
6. in the "Welcome to the Add Standard TCP/IP printer port Wizard" make sure that the printer is turned on and connected to the same network that your computer is connected to. click on the button "next".
7. under "Add Standard TCP/IP Printer Port" enter the host name of the printer. You can also use the IP address of the printer if it is static. Click 'Next' and then click 'Finish '.
8. now select HP in the manufacturers list, select your printer in the list of the models of printers and click the button "next".
9. If you can't find your printer, you will need to find the installation CD and use the 'Disc' option to select one of the files hp*.ini. You can also select another model of the same type HP printer.
10. Add the name of print spooler, and then click "next".
11. click on "next".
12. click on "Next" and "Finish."
Tags: HP Printers
Similar Questions
-
Problem with the screen! Have two black stripes on the right and left of the screen making it my screen more small and does not know how to remove them permanently. Can someone help, please step by step details. Thank you. Have Windows7!
Original title: screen
Looks like a monitor / setting screen. Horizontal and vertical positions may need to be adjusted in the monitor buttons. Another possibility is that the display resolution is not optimal.
-
HP Photosmart 3210 all-in-One of network error printing from Windows 7
Impression on Photosmart 3210 all-in-One on the home network in Windows 7 Acer Aspire laptop breaks down
-message is "error printing". Printing to the same printer via USB connection is successful.
Printing by the same network of other Windows 7 laptop (Sony) and Windows XP (Dell) works very well.
Used HP diagnostics to ensure drivers/software updated and used HP network diagnostic utility
to confirm the printer is visible on the network that it is. When the printed test page is selected, but nothing happens.
Hello
Thanks for posting,
This may be a problem with ports,
Please click on start and then click on devices and printers and then right-click on the Photosmart 3210 printer and click printer properties. In the printer properties window, click the ports tab and check if the selected ports is with the IP address of the printer also check if it is the WSD port. If the selected port is not the one with the IP address of the printer, select one with the IP address of the printer and also make sure that it's not a WSD port and the TCP/IP port. If a selected port type is WSD, select Standard TCP/IP port with the IP address of the printer. If you can't find any port in the list with the IP address of the printer, and then click Add port and then select TCP/IP Standard and enter the IP address of the printer in the address field and add the port and then click on apply and then try to print.
If the problem persists even after ensuring that the selected port is with the printer IP address o FLE, then try disabling the firewall installed on your computer (if any) software and then try to print.
-
HP Photosmart C6380 all-in-one intermittently print job does not print
My HP Photosmart C6380 all-in-One has a problem with the print jobs that fail intermittently to print the first time that I send it to the printer. I can see the print job listed in the queue, but it fails to print. I might have to send the job once again, twice or 3 times before it will finally print.
Try to stop and start the print spooler. I will include the instructions below.
1. click on the start menu.
2. in the search box, type services.msc and press enter on the keyboard.
3 scroll to find print spooler.
4. Select the print spooler in the list.
5. on the left side of the window, you should see the words stop and restart in blue letters. Click on stop.
6. now it say start. Click Start.
7. close the window.If this does not work, try to bypass the print spooler. I will include the instructions below.
1. click on the start menu.
2 click devices and printers.
3. right click on your printer.
4. Select printer properties.
5. click on the Advanced tab.
6. make sure that "Print directly to the printer" is checked.
7. click on apply to save the changes.
8. click OK to close the window.If it still does not work, go back and set the printer to use the spooler again. After that, try to assign the printer to use a different driver. The link below will take you to these instructions. Let me know what happens.
-
Printer worked flawlessly after upgrade to Windows 10. But with the last update, I can't scan more by HP Solution Center. I tried HP doctor and then remove and reinstall the software suite full, ensuring I have the latest drivers, but it still does not work. HP Solution Center is installed on my pc, I can even click on it and then it opens (briefly) and then closes, there is no way I can use the features. [However, doctor of HP, I could do an analysis of test and that worked, so there is nothing wrong with it.] Help...
Hello
Microsoft has since released a new update for this problem.
Fix solution:
Please download and install the following update KB3133431 from Microsoft:
https://support.Microsoft.com/en-us/KB/3133431
Note This update is available through Windows Update only. (Updates ) must be lit)
- Click the Start button, select 'Settings' and select 'Making day & security'
- Under "Windows Update", select "Advanced Options".
- Under "Choose how updates are installed," select "automatic (recommended) in the drop-down list in the menu drop-down."
Hope that helps.
Please click the "accept as solution" if it helped to solve your problem and "Bravo Thumbs up" as an encouragement
-
I have a disc of CS5, but impossible to find on which is mine in the long list of choices. When I click on one, it does not attend a place to enter
Serial No. or a download button
Ohrita you can download the Setup for Creative Suite 5 CS5 downloadfiles produced. You can check the license of the software that was purchased by checking your account on http://www.adobe.com/. You will find more details in your serial number to find fast - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.
-
I can't open the HP Solution Center to scan. When I try to open it I get a notification that all software is not installed. I ran Dr. scanning HP and all software installation downloaded and ran. Every thing is installed. Tried to open it to new and same result.
Am going to the forum and found this update of windows 3132372 could be the problem. Checked and I do not have that update to uninstall.
Because the HP Scan and Capture app can be a solution. Who has downloaded but it refused to detect my printer.
I really need to solve this problem. I got nothing else problems with printing and scanning as Windows 10 came.
A ran a uninstall and reinstalled (second time). It's working now.
-
How can I remove ink jets if my all-in-one is broken and does not light?
My hp officejet pro8600 than n911g was struck by lightning. It will turn is no longer. I used a new cord without result. I need to remove the ink jets, I recently installed. How can I access them without power?
It is possible that the printer was not fried, but the power may need to be reset. Watch this video for sure:
If the printer is really fried, remove the front panel to access the cartridge Board and force it to the left. Since you printer is not repairable, you lose nothing.
-
After the installation of Software Distribution Service 3.0 update my wireless network camera does not work how do I uninstall Software Distribution Service 3.0
How did you receive the update?
Was it via Windows Update or Microsoft Update?
Before the changes are made to your computer, the system restore points are made. This is so that you can go back in case an update causes problems.
Follow these steps:
1. click on the Start button
2. click on accessories
3. click on system tools
4. click on system restore
5. click on next
6. in the calendar that appears, select the one which refers to Software Distribution Service 3.0 and click Next
After the collection of certain data, the computer will restart, and the update will be gone.
Hope this helps
Post back if necessary
___________________________________________________________
If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Wireless network adapter does not work on my Satellite A200
Hello
My wireless network adapter does not work under Vista. If I press FN + F8 nothing happens. Wireless communication is always offline.
What can I do?
Details:
Typ: Atheros AR5008X Version: 7.2.0.164
Laptop Satellite 200
PSAE6EPlease help me!
Thanks in advance!Phil
BIOS bug? I don t think so
First of all, you must make sure that this isn't a hardware problem. In this case, insert the Toshiba Recovery CD and reinstall the operating system of this device. This will outline the laptop to factory settings. Notes; This would format the whole HARD drive.
After the new installation, you must activate the WLan switch on the side of books, and you can then use the switch button FN + F8 to select the WiFi network.
I assume that you have already configured your Wlan router. So the same settings such as the SSID, encryption of WLan, etc. must be defined on the laptop too.
-
I am runing vista and do not know how to use the fax machine
I am runing vista and do not know how to use the fax machine
Here's how to set up Windows Fax and Scan: http://windows.microsoft.com/en-us/windows-vista/Set-up-your-computer-to-send-and-receive-faxes. Navigate the reference links on the right for more information on how to send faxes and other information. If you do this on every page you just, you can see all the articles on how to fax and scan and configure the system and solve problems, and many other subjects that may be necessary, useful or informative. After that, you must be an expert on this subject.
Here is a quick and easy way to send a fax in Vista: http://www.ehow.com/how_2029566_send-fax-vista.html.
Unfortunately, the foregoing is available in Business, Enterprise, and Ultimate - not Basic or Home Premium. In the latter, you need a 3rd party program. If this is the case, here are some options:
With the compliments of Bob F. http://www.vistax64.com/vista-print-fax-scan/127986-how-do-i-download-windows-fax-scan.html:
Not available in Vista Home Premium Basic FAX. It is available in complete edition,
Extreme and business.You might want to consider Snappy Fax at a low cost:
http://www.snappysoftware.com/or the free version of BVRP:
http://www.usr.com/BVRP/bvrp.aspor a full BVRP Classic Phone Tools 9: $29.90
http://www.shop.Avanquest.com/USA/PR...S_CPT_homepageLook screen kinda gross but the product Snappy fax
actually, is quite rich in features and works very well. BVRP also works very well,
screen looks a bit better. Other that that, there are minor differences
performance between the two.I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
I have Adobe Acrobat XI and can not know how to draw a line. I need to redline some documents but can not. Does version XI even not this feature?
Yes, Acrobat Pro XI and standard have this ability.
There is the comment > Annotations > online tool.
There is the comment > Annotations > tool bar.In the Properties dialog box for one, you can select a desired color (i.e. red).
So, in properties, you can check a choice to make this the default value of the tool.Basically, all versions of Acrobat (including the new "DC") offer this feature.
If you work with a scanned image that has been placed in the PDF don't forget to use the OCR to get an output of a 'real' text - Acrobat provides a feature of OCR.
Be well...
-
I can't figure out how to download an app on my new iPad pro. I can get a soft, and it appears in the search bar, but then does not know how to download actually.
To download a free or paid app in the iOS store, you press the rectangular block that displays the word FREE or the actual price of the application.
Then, there is a prompt to connect to the iOS App Store with your Apple ID & Password to accept the purchase and download it to your iDevice.
Good luck!
-
I can NOT connect my Facebook account to make Yahtzee can access my contacts. He said that Facebook is not configured on this phone. ??? What this mean and how can I solve this problem? I have also a certificate has expired and do NOT know how to get a certificate of update. ? Please Help, I have NOT been able to get help from any of these Issuea. Very frustrated. Please contact me by txt on my iPhone 352-257-9403 if possible. Thank you for your support
iOS 9.2.1
certificate is daily horoscope
wwhat the devil is and why it has expired?
-
i cant get adobe flash player to work and when I look in ms confing is shows that he is arrested and does not work how can I change to run again
Hello
This can help you:
Download and run the Flash Player uninstaller program.
http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Windows.html
Then download and install Flash Player; After unchecking installing Chrome and Google toolbar option:
http://get.Adobe.com/flashplayer/?promoid=BUIGP
If the problem persists, you may want to ask in the Forums of community Flash Player:
http://forums.Adobe.com/community/flashplayer
See you soon.
Maybe you are looking for
-
the sound button works in googleTradutor
When you use the "https://translate.google.com".When I click on the 'listen' (speaker icon), is not no sound
-
-I can get Safari on Windows 10?
-
VT is enabled on Tecra A10-112
I am considering buying a Tecra A10-112 and I need to know if the VT instructions are enabled. It's a question mark or break for me because I want it to load 64-bit virtualization. I don't think it's as simple that if the processor supports, the BIOS
-
Windows returns to original settings after Windows Update.
Original title: when I try update windows with the update windows, it works. Does the update, then it restores the changes directly after.
-
Restoration of Windows Media Center Edition 2006
where can I get new for my computer restore disks laptop im running windows media center edition 2006