Photosmart 5510-e-all-in-0ne B: ink is not placed on a paper

Similar Questions

• HP Photosmart Plus e - all in one, failure ink system, Oxc190013

  HP Photosmart Plus e-all in one, read the error message failure, Oxc190013, ink on iMac system, ' the printhead has failed and can print is no longer.  3 color cartridges work but does not print black ink. I checked the surveys of the cartridge and the black is about half full, and it's a HP 564XL. I also removed the cartridge and the pad has not dried out. Is - fixable?

  zekefreak

  See the following link

  http://support.HP.com/us-en/document/c02142902

  If you have followed all the steps, contact hp support and see if a replacement print head resolves the problem. Good luck!

• HP photosmart 5515 all-in-one: HP5515 all-in-one black ink will not print

  I'm having the same problem that other messages that I have seen posted - my black ink will not print

  Help!

  You can try to unlock the black cartridge using a cotton swab soaked in hot water.

  Turn the printer off by removing the power cable.

  Remove the black cartridge & you we see a wire mesh DAB gently with the Q-Tip.

  A cleanup operation between attempts.

• 7520 e-all-in-one black ink does not print

  Black ink will not print.  Tried to clean it. Replaced by the new cartridge. Other colors are fine.  Picture is fine.

  The here document has troubleshooting which can help solve the black does not print on your Photosmart 7520e.  Don't forget to check the vents, as shown in the third stage of six, solution.  If the above does not resolve the problem, the message here can help.

• Black ink failure Photosmart 5510 e - All in one series

  Hi all

  Just bought the 5510 all-in-one PC world.

  2 questions.

  1. I can print it, but no (or little) black ink. I swapped the cartridges (in which case one provided in the box was a dud) but the same thing happens. No impression, or very light gray.

  2. I can print an alignment page, but the analysis fails, no suggestion of how to solve the problems, if alignment is dead in the water

  I lived all the troubleshooting onboard and used the mac based system to solve problems too.

  Nothing helps.

  (With no black ink), I can print from iphone or mac.

  Please help if you can.

  Thank you

  Ben

  Hold button power for 20 seconds and then turn off the machine, then hold for 20 seconds then turn on the machine and this machine is turned on, press and hold the power button for three seconds following. This piece of lunatic of advice was given to me by the support. It worked. Which is lucky for them. Apparently not a ridiculous idea.

• Replacement HP genuine ink HP Photosmart 5510 e-all-in-one series of B111

  If I replace a genuine hp for another ink new cartridge does not always any color to the page on the first day. Did all the different steps to clean the heads of printer etc...  This happens not all the time but enough to be annoying. Does anyone else have this problem? Thank you

  Hi @RobCasc and welcome to the Forums of HP!

  I see that you have problems with ink.  I would like to help.

  I recommend to remove the ink cartridges and perform a power reset.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I then recommend you using this document on fixing of the streaks of ink faded prints and other common Print quality problems

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• ink cartridges HP PHOTOSMART PREMIUM FAX ALL IN ONE C410A MAGENTA DO NOT PRINT

  I tried 2 new HP magenta ink in the printer and it's still not printing.  All other colors are displayed, what's the deal.

  Do the cleaning and alignment. Out of the printer head and clean it with soft cloth, helppppppppp

  Hi PaganC,

  I understand that you are unable to print with the magenta cartridge even after cleaning and aligning the print head.

  I suggest to use the following document to resolve the problem. Troubleshooting print quality problems

  If the problem persists, take a look at this video, you can find very useful. Hot water rinse printhead - HP ink printers of the series with removable printhead.

  I hope this helps.

• Photosmart 5510 e - all-in - One: Photosmart 5510 - scanning with iMac does not work

  After you have reinstalled the SW printer via the home network, the scan function is not visible when I opened the printer on my iMac. After the first installation has worked well. Then I had to reinstall all the SW on my Mac, so I lost the first installation of my printer. What can I do?

  Hi @HWEB

  What happens when you try to scan? Do you have a message of error before or during transmission scan, or do the software is not open? Maybe you can not locate the software now, or the software cannot communicate with the printer.

  While I wait for you, if the problem occurs when you print from several programs, please follow the steps below and let me know the results of your efforts.

  Scrub / uninstall

  • Open the Applications folder > HP or Hewlett-Packard folder > Uninstall HP
  • Click continue, click on one of the printers in the list.
  • * Only perform this step if you have not all other HP printers.  Press and hold the Option, control and command, while now the three buttons.
    
  • Click Uninstall.

  Manually uninstall the remaining files potentially - I apologize in advance is not a fun task! I'll try to make it easy to follow. Some of the files described in the following steps can be found, if you can't find one of the files or folders on your computer, do not be alarmed.

  Move the files or folders to the Recycle Bin, drag and drop

  • Macintosh HD/Applications / /Hewlett-Packard folder
  • Macintosh HD/Library/Application Support /- delete all files and folders on HP/Hewlett Packard
  • In Macintosh HD/Library/Caches - delete all files and folders on HP/Hewlett Packard
  • Macintosh HD/Library/Documentation/Help /- delete all files and folders on HP/Hewlett Packard
  • MacintoshHD/Library/Frameworks/HPServicesInterface.framework
  • MacintoshHD/Library/Frameworks/HPSmartX.framework
  • Macintosh HD/Library/Image Capture / TWAIN Data Sources /HP Scan Pro
  • In Macintosh HD/Library/Image Capture/Scripts - delete all files and folders on HP/Hewlett Packard
  • In Macintosh HD/Library/Preferences - delete all files and folders on HP/Hewlett Packard

  Move the Macintoshloginwindow.plist on the desktop. NOTE: Does not delete the loginwindow.plist file during the manual uninstallation may cause uninstall be retained.

  • In Macintosh HD/library/printers/hp - delete the folder
  • In Macintosh HD/Library/StartupItems, drag the following files in the trash, IO HP and HP trap monitor
  • In Macintosh HD/users/username (this should have a symbol of a house next to him) / Library/Preferences, drag the following files to the Trash: * all files starting with com.apple.print, * all files starting with com.hp, * all files beginning with Hewlett-Packard, * files starting with HP or hp
  • In MacintoshHD/users/USERNAME/Library/printers, drag all all-in-one printers listed here in the trash.
  • Drag the icons of HP from the dock and drop it onto a blank space on the desktop. The icon will disappear.

  Close all open windows.
  Turn it back on.
  Empty the trash.

  Reset the printing system

  1. Click on the Apple icon ( ), then click on System Preferences.

• How do the reset full on my photosmart 5510 printer all in one

  Hello

  I would really like to complete reset of my 5510 Photoscmart instructions.  We do not print black.  I have changed the cartridges twice, cleaned the heads of printer on the screen and with a damp cloth (as shown on Youtube) but still no black.

  Can you help me!

  The printer is out of warranty.

  Nicola

  (UNITED KINGDOM)

  Thanks for the reply Nicola!

  With this information, I'll send you a private message to gather additional information. If you are unsure how to check your messages on the forum this post, has instructions

• C410a photosmart premium hp all-in-0ne on pc with win xp, why it does not page print partial e-mail?

  Why the printer sometimes only preview and print part of a page of e-mail?

  Well, that's what I would do, not sure in a better way... First of all, I would set my gmail account in an email such as Outlook client. If you can't do that, then I copy and paste the body of my email in a text editor like Word and print it from there. I realize, the latest is not ideal, but if you must have a paper copy that you make. (assuming that your printer prints fine from Word and other applications)

• HP Photosmart 5510 e all-in-one... How to get hpeprint to print any email not just text

  Hi when I forward an email to hpeprint on my new 5510 email is printed with the text only.  I would like to see the recipients and the date and time as is normally indicated on the top of an email.  If I can get this result, and if so how.  If I send a link it shows just a link. I need more information.

  Hi amberjack,

  In order to create a clean and professional appearance messages that are automatically sent to your printer print without addresses and dates.  For the moment, there is no way to print these via ePrint.  In addition, send a link to the printer will only print the link itself.  The reason is because it will print the text received in email and will not follow the link.

  Let me know if this answers your questions.

• Photosmart 5510 MacBook Pro with OS 10.9 does not see the printer on the network

  Continues to give the error message that the printer is offline... in the process of installing it says successful implemented, but impossible to find the printer on the network... I has not changed anything, unless there was an automatic update done some part/sometimes recently... it was working fine.  The self-test on the printer wireless past everything!  iMac and iPad see & print!

  Please help me!

  Oh, Yes, it appears in the list of devices printer twice: once HP 5510 series when connected by USB, and once as 77 has 267 with everything what unknown IP connection but State... is one that says offline and cannot be found on the network.

  I tried all the steps listed in the proposals of the forum without success.

  Hi msdok,

  I understand that the printer is appearing offline even if you can print from the iPad and iMac. I see your message that you have already done some troubleshooting, but I'm not sure what you tried. I recommend using the steps below if you don't have it already.

  Reset the printing system

  1. Click on the Apple icon ( ), then click on System Preferences.

• Cartridge HP Photosmart Premium e-All-in-One Printer - C310a - does not fit

  I bought the same cartridge number 564, but she does not fit into my printer.  I'm so angry.  All I had to do in the past is the number, but now it seems that is not enough?  How will I know which cartridge fits into my printer.  Thank you.

  564 is the cartridge that I use in my C310a. If you bought the XL (with extra ink), it is a comfortable fit but works.

  http://support.HP.com/us-en/document/c02161668

• HP Photosmart Premium e-All-in-One Printer - C310a re Duplex print on A5 paper

  I tried the double-sided printing on paper format A5 auto and received a message telling me that the paper was too short & to use 'manual duplex' or print "odd or even-numbered" pages instead. (works fine on A4 paper)

  The second option seems a little long breath - but what is "manual duplex" and how are you?

  Hello

  Automatic Print taken Deplexing supported only on letter, Executive, A4, and B5 (ISO) paper sizes, not on smaller sizes as A5.

  You can find this information on page 33 of the below user guide:

  http://h10032.www1.HP.com/CTG/manual/c02516929.PDF

  Manual duplex printing can be done using the Pages to print.

  The application used to print, open the print dialog box, and then click Properties / preferences / Options to access printing preferences screen. :

  • Click Advanced.
  • In the Pages to print select Print odd Pages only .
  • Click OK to print.
  • After the odd numbered pages of the document were printed, remove the paper from the output tray.
  • Reload paper in the paper tray with the White side facing upwards.
  • Return to the drop Pages to print , and then select print even Pages only .
  • Click OK to print.

• Printer HP Photosmart 6510 e-All-in-One no ANALYSIS DO NOT THE PAGE WHOLE?

  Does anyone else have this problem?  I tried to scan a brochure, which I can have a file in my computer and throw the paper, but it keeps half the analysis page.  Is there something I need to do?  Any help would be appreciated, thanks.

  (I'm scanning it wireless if it has something to do with it, which I doubt)

  Hello
  The default analysis workflows configured to scan photo 6 x 4 in. make sure you change the scanning settings to not crop the area swept as follows:

  1 open the HP utility and select your device.
  2. based on Scan Settings open the "Scan to Computer".
  3. click on the tab "scan tasks.
  4. Select the shortcut Scan allows to analyze, and then click on edit.
  5. in the section of scanning from an HP device, click the blue triangle to expand the menu.
  6. in the expanded menu now, open the drop down next to cultures in and set as none.
  7. click OK and try to scan.

  Kind regards
  Shlomi