Photosmart 5520: Photo printing problem

Similar Questions

• HP Photosmart C4640 photo printing problem

  Whenever I want to print a picture, it always comes out wrong. Only half or 75% of the photo is printed on the paper. I print almost always 4X6s. I also vertical lines appear in the photo, there is ink on the back of the photo paper. I once before changed both ink cartridges and had the printer align them (came out as normal). I recently updated my OS to Windows 8.1 and uninstalled and reinstalled the printer for this OS. I printed in color and in black and white to see if that makes a difference, and it's not. Any help would be greatly appreciated!

  Hello Spain710,

  Welcome to the Forums of HP Support!

  It seems to me that this would help C4640 rollers must be cleaned with the lines on the paper and the missing part of the pictures.

  Here is a link to the proposed HP C4700 series printer roller cleaning troubleshooting: Error Message "on paper" and the printer is not Pick Up or paper feed.

  I hope this helps and if not, please reply back and I consider this further.

• Looking for the software for a HP Photosmart 7260 Photo printer

  Looking for a copy of the software for a HP Photosmart 7260 Photo printer.

  Hello

  Are - this you new printer and brand new? The link above shows pilots 'Printer Photo HP Photosmart 7260' and the last update for Windows XP (no drivers more after that, not for Vista, not for Windows 7...) about 10 years ago. If you want the ORIGINAL software, you can go to the XP section on the link above to download. "Now my question: is this your " HP Photosmart 7260 Photo Printer"?"

  Kind regards.

• Photosmart 5520 of printing quality

  I recently bought a photosmart 5520. It's my fourth HP printer. So far, I've been more than happy with the HP printers and that's why I've stuck with them.

  I am extremely disappointed by the print quality of the 5520. When you print a document in black Black is almost gray. It just doesn't seem to be enough ink and when printing photo skin tones are not accurate. It seems to be too much red.

  I got a deskjet 2180, which is only a printer not expensive but the quality of the print is much better than the print quality of the 5520.

  I want to know y at - it a setting that I can do to improve the print quality of my 5520 or is it a matter of "what I see, this is what I get.

  Please notify. I await your response.

  Concerning

  Hi, sorry to hear that you are having problems with the print quality. Here is a link with some things you can check.

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=5157533&prodTypeId=18972&prodSeriesId=5157533&ObjectID=c03241743

  I hope you find a solution. let you know how you go.

• HP Photosmart 5520: Cannot print from desktop

  Just recently, I can't print from my desktop computer, but can my laptop. I have a few days ago.

  My print options presents the print job in the queue, but will not charge.

  Help!

  Hello @Smurfette1962,

  Thanks for posting in the Forums of HP and welcome!

  I would like to help with the problem that you are experiencing printing from your Windows 7 computer e-all-in-one printer, HP Photosmart 5520.

  If you see the print job stuck in the queue on a Windows 7 computer, I would recommend following the steps described in this document to solve the problem - HP printers - print jobs stuck in the queue for printing (Windows)

  Please reply to let me know if we've solved the problem!

  

• HP photosmart 5520 keeps printing test pages, how can I stop it

  my printer hp photosmart 5520 guard shipments of test pages print.

  How to cancel it?

  as I can not print anything else because when I turn on the printer, it prints all load test pages!

  its really annoying and wasting my!

  Please tell me how to fix this problem ASAP

  It is possible that a print job waiting in the queue is getting printed whenever you turn on the printer. To do this, please disconnect the printer from the computer.

  1. If the printer is connected by USB cable, simply unplug the USB cable at the end of the printer.

  2. If the printer is connected wireless, disable wireless by following the steps below:

  (a) tap the wireless on the printer control panel.

  (b) select the setting wireless as the 'Off '.

  Now, check if the printer still prints the test pages. Let me know what you find.

• El Capitan & Canon PixmaPro9000 photo printer problem

  updated my desktop iMac late 2012 and ElCapitan and PixmaPro9000 of Canon photo printer computer no more prints of photo program apples with the appropriate color. Each photo is shades of yellow and black. The printer will print black and white word documents. I downloaded the software from the Canon by any other recommendation for this problem, but it does not solve the problem. Help! Please don't tell me I need a new printer

  I would check the configuration of your Pro9000. Please open an application called Information System, located under Applications > utilities. In the left column select printers. If this is the only printer on the Mac, then its information will appear in the right pane. If you have several printers, select the Pro9000 in the upper pane right to view its information in the bottom right pane. Please select this information, copy and then paste it here so I can check it out.

• HP Photosmart B109n-z (printing problem) Please help

  Hi all

  I have the HP Photosmart B109n-z printer and put up wireless and it works fine I had no problem with him.

  The other day the black ink stopped working - the cartridge is not empty but it's is no longer black prinking on all documents.  Since I put all new cartridges in, he acknowledges them all, including black, and if I print something like a word document, and then it moves as if printing but the page comes out blank - no black ink is used.

  I work for myself, and work at home, it will get this resolved as soon as possible.

  I checked the cartidge - it's good.

  I checked the connection and the Bay print cartridge - they are clean.

  Help, please.

  The color works fine.

  The issue of black ink is the same print, scan or copy.

  And I have tried turning everything off and on again!

  Hello

  You could try the Solution 5 in the document troubleshooting that I am a link here:

  Quality of ink troubleshooting

  This will show the colors that are printing.  There are also additional troubleshooting steps to follow

• HP Photosmart 5520 - can print but scan and copy the work of doesn´t

  Hello

  I just bought a HP all in one Photosmart 5520. It works fine as a printer, but when I scan or copy I get a 'white' scan / paper in white. And Yes, the text on the paper was facing the Analyzer anyone know whatcould wrong?

  Thanks for the reply AndersRH.

  Sorry to hear about the issue. Because it seems to be a hardware malfunction, I suggest you call the Tech Support of HP. They may be able to give two options for replacement or trade in options.

  If you call in North America, the number is 1-800-474-6836 and for all other regions: click here.

  Take care

• photosmart HP 6520 printing problems all in one.

  I have a printing problem.  I can print a test page, no problem.  When I try to print anything else, there is a msg of error and nothing prints.  I know there is communication between the printer and the computer.  I can scan.  Why it will not print documents?

  Hi kimmarie52,

  Welcome to the HP forums

  I'm sorry to hear you have had printing problems with your 6520 Photosmart but once I put together a little more information, I'd be happy to help you!

  1. what operating system you have?

  2. how the printer is connected to the PC? USB, Ethernet or wireless?

  3. What is the error you get when you try to print?

  4. have you tried different programs to ensure that it is not related to the program?

  If you work with Windows, I would suggest that you download and run the printing HP and Scan Doctor while I wait for your answer to see if it can help. If it fails anywhere, let me know where.

  I hope hear from you soon!

• HP Photosmart 5520 - cannot print - using windows 7

  I have a wireless laptop and can go anywhere.  I can print the wireless network test results and Page of Configuration of HP network.   However, I can't print other documents.  My test results all the PASS and signal show as very good.  Current configuration as expected except DO NOT CONNECT Internet.

  I tried various tools and options on the HP Site and others.  I have reistalled printer driver and printer and wireless details says it is connected.  I don't have the ability to use a cable.

  It was suggested to my static ip address, I thought I'd made however on the prints on (and I have a lot in the last hours) the ip adddresses seems inconsistent.  After 5 hours, any help would be greatly appreciated.

  Hi @moports,

  Welcome to the HP Forums!

  I noticed that you are unable to print with your HP Photosmart 5520, on Windows 7 using a wireless connection. I'm happy to help you with your print!

  Please see the following guides:

  • "Printer is off-line" Message appears on the computer and the printer does not print: Windows 7.
  • The printer keeps Wi-Fi connection.

  Also, I recommend the HP wireless printing Center, Web site. You want to make sure that the router broadcasts not 5 ghz to 2.4 ghz.

  This post, incoming and outgoing Printer Ports, of @VisionAiry. I will tell you what ports must be open not closed on the router.

  Hope this information helps and have a great day!

• Strange photo printing problem.

  Windows 7 SP1 runs on a home-built PC (Intel Core 2 Duo E8400/Nvidia 8600GT) my printer is a HewlettPackard Deskjet 1050 A., I'm having a problem very strange printing photos and other images.

  If the image is stored on my PC, it will print only in shades of gray, well that the images display correctly in color on the monitor. Images printed directly from the internet using "file > print" in the menu of the browser print in color.

  Diagnostic and test pages print in color, as expected. Color of text prints correctly. In "Printing Options", "Print in grayscale" is disabled. I thought initially a printer problem, but printer diagnosis and convenience stores to find nothing wrong.

  I think that the problem must be in the attributes or properties of the image, but I don't know where to begin the search in order to find a solution.

  Anyone know what I can do to fix this?

  Gary,

  In addition to answering the question about the types of files which are giving you the problem, what program you use to view and print the files saved on your computer?

  If you are using the Windows Photo Viewer (Windows 7 by default), see--> http://answers.microsoft.com/en-us/windows/forum/windows_7-pictures/jpegs-only-print-in-black-and-white-via-the-image/b9c1a406-b046-48d3-b9c3-ab23279c8b3a

• HP Photosmart Plus - B210a printing problems

  My photo printer prints now all my photos in red.  First of all, this occurred when the ink cartridges were low.  I replaced the time and the Red pictures disappeared.  When photos started printing in red, I have replaced all cartridges with HP ink cartridges and made sure all cartridges have not all the bands on them to restrict the flow of ink, but still to print photos in red.  I also cleaned and aligned printheads several times but the problem persists.  By tools, my ink levels is now up to 50 percent of the Red photo printing.  I use photo paper bought at Costco, which is the same paper used when the images did print correctly.

  What should I do for the photo printer to get the pictures to print correctly?

  I don't know exactly of what has caused the problem, but I have speculations. It is possible that the ink pipes have stamps, air preventing the ink being subject to a push of the ink cartridge for the print heads. That's why it took 2-3 printheads clean processes to get the ink out. Another possibility is that the print nozzles are blocked and the print head cleaning process after several tests. Regarding prevention, the only thing that I could think off is to make sure to use the power button when you want to turn off the printer. This is to ensure that the print heads is capped correctly to avoid the obstruction. So basically when you get the power failure, be sure to turn on the printer as soon as you get back power. Run a clean print head immediately.

• HP B210a Photosmart and iPad2 printing problem

  Hello.
  I just bought the B210a for my iPad2 wireless printing. I joined the printer properly to my W - LAN network (as far I can tell there is no problems with the WPA or IP) and implemented by following the instructions in the manuals. I had no problem printing from my PC. My iPad also recognizes the printer without problem. But when I try to print from my iPad (on Safari and hp iPrint) the printer does nothing. HP iPrint starts the race printingprocess for a few seconds and then tells me something from (excuse me, I have to translate it from German) as "possible within printing problems. Check the printer for more information". My printer does not show anything.
  -The report says it all test is successful, the quality of the signal is fine, the identifier SSID is correct, MAC, IP address, DHCP, infrastructure, WPA - PSK and automatic encryption (AES)
  -in my router configuration screen, the printer has been Born as a networkdevice with IP address
  -MAC filtering is turned off
  -W - LAN mode is 802. 11 b/g to channel 13
  -WPS is disabled because it caused problems connecting the iPad to W - LAN
  -My iPad is also in the W - LAN, network and can access the internet through a router
  -I can't acess the printserver B210a via the IP address of my PC's built-in
  -all devices are in the same subnet 192.168.1.xxx
  -J' have already disabled the power of my iPad, printer and router and got no result

  I hope you can help me. Thank you.

  I just found the solution: I just had to restart the IPad2 (hold both keys). Now, it works fine.

• Cannot get photosmart 5520 to print wireless from my Macbook Air

  Hello

  My Photosmart 5520 worked beautifully for centuries, but all of a sudden it is not found on my iPad, iPhone or MacBook Air.  I uninstalled it and I tried to reinstall, but it will not show anywhere.  I use OS X Version 10.9.1 I tried everything I can think of in recent weeks and I'm ready to throw it out the window! (o).

  I have no virus protection to block this and as I said, it worked very well, but he just suddenly stop.  Please can anyone offer any help?

  Thank you very much!

  What router are you using?  You've restarted the router by pulling on its feeder momentarily?