Photosmart 5524 duplex printing margins issue

Similar Questions

• Photosmart 7520 Duplex printing with A5?

  Hey well informed friends HP!

  I have been working on a book-type project and am ready to print. Unfortunately, now that everything is set-out (in Mellel) and I bought the paper (from England!), my Mac (OS 10.6.8) does not want me to print my book on both sides of a sheet of A5 with long edge binding. I hope that there is a sort of Workaround available that will allow me to do that; scaling my layout isn't really an option at this point. Please tell me I'm not outta luck and I'll be able to print my book!

  Thanks in advance for any advice you can offer!

  Hello

  The accessory automatic duplex support only formats of A4 paper, letter or legal due to hardware limitations.

  A5 paper size, you can perform copy double-sided print manually using the Pages of print options.

  Follow print on both sides of the paper manually below to perform a manual duplex print job:

  http://support.HP.com/us-en/document/c01663233

  Shlomi

• OSX Lion & HP photosmart C4780 - duplex printing?

  Hello

  I have a hp photosmart C4780 and I'm under Mac OS lion x under a 2010 macbook pro. I have the drivers and software available on the hp site and everything is up-to-date.

  My question is simple: How can I print duplex?

  When I try to print a document, I'm not able to select the duplex mode. As far as I understand that it is possible to print manual duplex to windows help and this printer. I am able to do the same on the Lion?

  Thank you

  Hello
  The two-Sided feature reffer automatic two sided printing.
  As the specific device provide printing manual duplex only, you can perform duplexing manual as follows:

  To perform manual duplexing, Joanie you use the Pages to the printer setting, you can find below:
  http://support.HP.com/us-en/document/c01663233

  Thus, another alternative is to use the HP two-sided printing software:
  http://FTP.HP.com/pub/softlib/software12/COL35975/MP-88750-2/HP_Two-sided_Printing.dmg
  You can access this tool by clicking the PDF button at the bottom of the print dialog box, and then select double-sided printing and follow the on-screen instructions.

  Kind regards
  Shlomi

• Photosmart 7510 duplex printing?

  The 7510 will do double-sided printing? If so, how to install?

  Yes, getting the duplex (two-sided) of printing. When you install the HP software that came with the printer, you will see one of the icons is "HP Photosmart 7510 Series. Open, click Printer Preferences. The box that says print on both sides were 'none' will choose. Drop drop-down, two-sided on short side OR back on the long side. You are then ready to go. The printer prints the first page, sucks the sheet back, flips and prints the next page and so on.

• Photosmart 8450: Photosmart 8450 duplex printing upside down with Win 10

  Hello

  I checked all the settings, tried to flip short side / long-side, reinstalled the drivers and still it prints on the back backwards! He worked well with Windows 7, but not Windows 10.

  Any ideas on what I can do to fix this?

  You can try a different driver.  The Deskjet 6840 driver is compatible with the Photosmart 8450 and also provides a number of additional printing options such as resizing and reflection.  To install this driver, follow these steps: go to the folder of devices and printers, right click on the Photosmart 8450, select properties from the printer, advanced, new driver, Next, Windows Update, wait a few minutes for the list to update.  Now, choose HP as manufacturer and select the driver HP Deskjet 6840 (HP), apply.  Then, select the general tab, printing options and set the default values you want, apply, OK.

• Photosmart 5524: 5524 Print Duplex

  Hi, I already bought HP Photosmart 5524. I had a problem with printing and double-sided scanning. After you print the first page, the printer pulls the page and it does not print. If I change manual double-sided printing option, the printer will work correctly.

  Hello, @marek30 - greetings!

  Welcome to the HP Forum! It is a wonderful location to converse with the community, get help and advice.

  I understand that you need to configure printing double-sided with your Photosmart printer.  Please follow the steps mentioned below and check:

  • Go to control panel - devices and printers.
  • Right-click on Photosmart 5524, then select 'printer properties '.
  • Select the tab "device settings".
  • Ensure that the "two-sided" is set to "Installed" rather than "Not installed" and save the settings.
  • Now, again give a right click on the printer icon and select "Print Options".
  • If a "Printing shortcuts" tab is available, select the option "Print on Both Sides" or «print double-sided (Duplex)»
  • If 'Print shortcut' is not available, click the "Layout", "Includes" or "Finishing tab", depending on which tab is displayed in your version of the driver.
  • Locate the "Print on Both Sides" or "duplex printing" menu or an option, then the option link or page flip depending on whether you want the document reads like a brochure or a Tablet and save the settings.

  That should do the trick. Let me know!

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• Photosmart 5524: Sweep ends only when go HP printer Asst. ; used to scan automatically

  Just for the last 2 weeks or so, when I go to scan a document to my computer with a Wi - Fi, the message ' computer does not, check network connection is displayed. I have virtue to solve the problem and the analysis, after going to the Printer Wizard, manage the scan of the computer, and then disable and then allowing once again the analysis to the action of the computer. Why is this and I go back to auto scan the prinetr again? Is this something to do with the recent Microsoft updates?

  Hey @Palmyra3,

  Welcome to the Forums of HP Support!
  
  I understand that you are not able to use systematically the "computer scan" function on your HP Photosmart 5524 e-all-in-one printer to your computer Windows 8.1. I would like to help you today with this problem of communication of intermittent scanning. Now, because you are able to go in and manually enable the option 'analysis of the computer' and it works fine (temporarily) we know that your software and drivers are correctly installed and that you have no such conflict of wireless communication. I think a background on your computer or a firewall program can cause the conflict of communication bidirectional scan.

  To solve this problem today can I please have you click here. When the page opens you will be taken to the paper Support HP for a computer"not found" or an error message "Connection error" message.

  The steps that I want you to pass by are going to be a little out of order that the document States. Please run through:

  Solution 5: Search for critical updates, hotfixes, and firmware:

  The only available for your printer update is update the firmware of the printer HP Photosmart 5520. If you click on the link provided you can upgrade the firmware for your printer and test again the front scan function.

  Solution 6: uninstall the software, run Disk Cleanup, turn off background programs, configure the firewall and then reinstall the software:
  

  Please start by step 4: turn off programs running in the background and again test the scan function. If everything works fine now that a program running on your computer background is at the origin of the conflict. You can leave your disabled if you want as the background programs. Programs on your computer will work fine, they just used automatically running in the background of your computer.

  If the problem persists, please browse: second step: delete unnecessary files and folders with disk cleanup, step 3: restart the computer, and fifth stage: Configure the firewall under Solution 6

  If the issue still persists, as the race through Solution 2: download a tool to fix the problem automatically

  Please let me know if the steps I have provided resolve your problem of communication of scan. Good luck!

• Photosmart 5520 (but also others) duplex printing cleared at the bottom

  Very recently, I bought a Hp Photosmart 5520 and I found that sometimes the bottom of a page is cut off when printing double-sided. I looked in this forum and found that this problem is hardware related and can not be solved, but there are solutions. I did a few tests with my current setup and I want to share my discoveries, here for other users waiting for HP to add a FAQ for the photosmart 5520 entry. (but also for the 6520 and 7520, probably)

  The problem is clearly stated in a few messages, dating from September 2013 and Nov 2013, although it is not very easy to find

  http://h30434.www3.HP.com/T5/other-printing-questions/duplexing-discrepancy/m-p/2470573/highlight/tr...

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/double-sided-printing-is-cut-off-short-Phot...

  Basically, the margin of the low printable area is 3mm side simple impression, while it is 15mm (at least!) for the first page, double-sided printing. This is due to the fact that the printer must keep the paper in the output roll after that that he finished printing the first page. It is therefore IMPOSSIBLE to duplex - print a document with text or graphics that extends beyond the margin of the lower 15 mm, unless the page size is reduced so that the effective bottom margin is 15 mm. On the other hand, if the document does not contain text or graphics beyond bottom margin of 15 mm it CAN be printed double-sided without reduction.

  IMHO, the problem is that the default behavior of the firmware of the printer, the drivers of operating system and/or applications do not always properly address this limitation leading to surprising or unsatisfactory results.

  To better understand the limits and behavior of the printer, I have carried out tests under the following conditions:

  (1) copy 2-sided vs 1-side in the printer display

  (2) Windows 7 applications: Word2010, Foxit PDF reader, Acrobat PDF reader

  (3) 4.3 android: Cloud Print and HP ePrint apps

  The firmware in the printer is MGP5CN1351AR (Sep 12, 2013)

  The windows version of printer drivers is 28.8 (October 30, 2012)

  For tests 2 and 3, I have prepared a document word of 2 pages with headers and footers located exactly at 15 mm of margin top and bottom of the page and I have produced a PDF with CutePDF (unfortunately this forum does not allow attachments, otherwise I would have attached it).

  The results were as follows

  (1) in 2-sided copy the last 15 mm on part and on the other copy of the output are empty, even if the text of the content entry page, while, in 1-sided copy only the last 3 mm are empty (resizing is turned off, of course)

  (2) double-sided printed of Word2010 gives a duplexer not resized when the printing preferences, advanced options, "Arrangement" is disabled. If it is set on, the output is reduced. Print PDF files is tricky: there are several different options in Foxit PDF and acrobat PDF. Auto-Centre and adjustment - on the page to print double-sided, but do not keep the right size in Foxit PDF reader; If preserve layout is off a significant part of the bottom of the page is not printed, apparently due to the fact that the margins are not properly managed by foxit PDF. Acrobat PDF instead, leave a good impression both sides preserve the page layout and scaling are disabled (obviously up to 15 mm).

  (3) android Cloud Print prints the word and pdf files WITHOUT a provision to 'preserve', this is why some clipping may occur; HP ePrint prints two word files and pdf reduced in size, as if "preserve layout" option has been set.

  In summary, I'll leave the "preserve layout" options always on in windows and I'll take a cut on the side of double-sided printing and I use hp eprint instead of cloudprint. If the correct size is important to a PDF file, it is best to experiment with Acrobat PDF (even if it is not a light program). iI would be expected at HP improved the behavior of the windows printer drivers to print a PDF file.

  I hope that this post may be useful to other people.

  You are right, that the effective page size is reduced because of the extra margins required to manage the document in automatic duplex mode.  From the rear is donated in the printer from the bottom and bottom printed in the top margin is also higher top for the back to the front.

  The checkbox 'Keep the page layout' is important for results appropriate, although it will reduce the effective print size.

  I've seen reports before of Foxit PDF printing problems, I avoid and use Adobe Reader.

• Photosmart 5524: MGP1CN1610AR update the Firmware on HP PhotoSmart 5524 on September 14, 2016 broke wireless printing

  I have a question which I believe is related to the MGP1CN1610AR firmware update that was released on September 14, 2016 and auto installed on my HP Photosmart 5524.  Since the update I can print is no longer my laptop Windows 10, or my iPhone with iOS 10.  I can, however, send an e-mail to my HPEPrint account and this shows with success - which proves that the printer is connected to the internet and WiFi.

  My network is provided by my BT HomeHub 5 with BT infinity.  The status of router, the printer displays intermittently as connected then disconnected.  This is since the update of the firmware.

  Is it possible to restore the firmware on the printer? OR is there a known solution to get my WiFi printing works again.

  Hi RTD_HPUser,

  Thank you for your answer!

  I'm glad you found a solution that worked for you. About the firmware, as long as the Web service is enabled, you can select the icon Web Services, settings, and then select printer Update, then the update is automatic, and turns off. This will prevent the firmware update on the printer.

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  I hope that answers your question!

• Automatic duplex printing - Photosmart 310 has

  I have a new printer Photosmart Premium e-All-In-One C310a. In highlights eco told me, ' save the document of up to 50% with automatic duplexing.»

  Since I assumed this printer could do that, but I was not able to find out how.

  The seven-page document that comes with the printer isn't really a "user guide". Its more like a summary of features, very few 'how to' save for a step 4 put in place the process.

  The C310a has the ability to print two-sided documents automatically and if so, how?

  Thank you

  Hello Bobst,

  Regarding my info tells me the device supports automatich duplex printing, but needs a duplexor to do. Some models are sold with the already installed duplexor and some models are not. So in this case, you will need to buy a duplexor. TO see if you model has an installed duplexor check the back of the unit. If installed it should look at there is a black brick that comes out of the unit.  Click HERE for more info on this duplexor, its two-sided printing accessory.

• HP photosmart pro b8350 print Windows 7 x 64 not available automatic duplex unit

  I bought a photosmart pro b8350 back in 2006 or so to use on my XP64 system and added the print front and back in a short time module after. I upgraded to Windows 7 Professional 64 over a year ago and just recently installed the printer. I can't use the automatic duplex with the built-in driver option. I need to print a quantity just now that I have it back up and duplex printing automatically has been pretty well a need, as I have to leave the system unattended while I work on other projects. I really need to manually duplex everything now? If I switch to a new printer in the near future, he will also lose the functionality in the next years? I still can't use the advanced features of my scanjet 8300 that I bought in 2006, either. The driver has never fully supported XP64.

  Hello

  Maybe it's a bug in Windows 7. The duplexor is reported as not installed by default, so you need to change this

  Go to the Control Panel, find the devices and printers, then click on it. Then right click on your printer icon and choose 'printer properties '. In the new screen go to the "Device settings" tab and under "automatic duplex print unit" set installation options on installed. Should be on is not installed by default, so change installed, then click on apply. Restart the software and perhaps even your computer and check that duplex printing is an option now.

• Photosmart 7520: back to back printing (duplex printing)

  I used to be able to print back to back and somehow, I changed it, but I can't for the life of me find where to change my printing to double sided printing preferences.  I have manual in PDF format to print and do not want to waste paper - it's a matter of adobe or one that I can solve it in the settings of the printer?  Have you looked at the manual of the printer, I can't find anything that relates to my problem. Any help gratefully received.

  JGaleL

  Welcome to the Community Forum of HP.

  I'm not talking Mac - OSX or Mac nothing else, frankly.  The smile.

  I don't know that the Duplex setting must be defined in the Print Options.

  I found the following - directions probably depends on your version of Mac OS x - it may be enough for you to find the configuration:

  Double-sided printing

  and from HP:

  Print on both sides of the paper (duplex printing) under Mac OS X v10.6 for printers HP all-in-one

  Click on the Thumbs - Up Kudos to show that you appreciate the help.

  I am happy to provide assistance on behalf of HP. I do not work for HP.

  Click on accept as Solution when the answer provides a fix or a workaround!

• HP Photosmart Premium e-All-in-One Printer - C310a re Duplex print on A5 paper

  I tried the double-sided printing on paper format A5 auto and received a message telling me that the paper was too short & to use 'manual duplex' or print "odd or even-numbered" pages instead. (works fine on A4 paper)

  The second option seems a little long breath - but what is "manual duplex" and how are you?

  Hello

  Automatic Print taken Deplexing supported only on letter, Executive, A4, and B5 (ISO) paper sizes, not on smaller sizes as A5.

  You can find this information on page 33 of the below user guide:

  http://h10032.www1.HP.com/CTG/manual/c02516929.PDF

  Manual duplex printing can be done using the Pages to print.

  The application used to print, open the print dialog box, and then click Properties / preferences / Options to access printing preferences screen. :

  • Click Advanced.
  • In the Pages to print select Print odd Pages only .
  • Click OK to print.
  • After the odd numbered pages of the document were printed, remove the paper from the output tray.
  • Reload paper in the paper tray with the White side facing upwards.
  • Return to the drop Pages to print , and then select print even Pages only .
  • Click OK to print.

• I can't automatically duplex print with my HP Photosmart C7280

  They only options I have is for manual, left or right edge.  In the past, I could choose to do duplex printing automatically.  the printer has a duplex magazine.   I tried several times to reinstall the drivers/software does not.

  I use Windows 7 Professional 32 bit.  I get no error message.  I have

  The duplexer must be set to "installed", as described in the Vista/Windows 7 Duplex Printing solutions to the problems here.

• HP Photosmart C7280 all-in-One Printer Windows 7 64 bit automatic duplex printing

  I have a new laptop Dell, Windows 7 64 bit computer.  I am able to download my printer (which is connected wireless), but I can't get the automatic duplex printing function to work. I bought this particular printer precisely to be able to do automatic double-sided printing. The downloads that I have tried do not work for Windows 7 64-bit. What can I do else?

  Hey,.

  You should enable the option of automatic duplex printing:

   

  Go to control panel > devices and printers.
  Right-click the printer icon, and then click printer properties.
  Click the device settings tab.
  The accessory in Duplex face as installed two automatic and then click OK to save the change.