Photosmart 6510 print size is not not to paper size
Problem: I select paper photo 4 x 6 size when you print from photoshop, the final print has always an empty border 1/2 inch, even during the selection of printing without margins.
Printer model: HP Photosmart 6510
OS: Windows 7
Method of connection: wireless
Error messages: no error message
The right driver is not designed to accept custom paper sizes. You can have the printer to use another driver that supports them well. I will link to a post with the steps to assign another driver print below. I hope this helps.
Tags: HP Printers
my hp photosmart C4600 Printer series does not work via my bluetooth USB 2.0 Wireless printer adapter, I run windows 7
He ran once before, one of my suggestions of solution was the coil (?) was incorrectly, but don't know how to adjust it
(1) have you made changes before the start of this issue?
(2) what is the exact error message/code?
A print spooler is software that temporarily stores the disk printing hard or in memory until the printer is ready to print. If you were expecting an abnormally long time to print a document, or if you see an error message about the print spooler, Spooler subsystem or spooler resources, you might need to change and then restart the print spooler service on your computer.
To do this, we recommend that you save your work and restart the computer to restart the print spooler service. If you do not want to restart the computer, try these steps.
To change or restart the print spooler serviceYou must be logged on as administrator to perform these steps.
a. click the Start button, Control Panel, click System and Maintenance and then click Administrative Tools.
b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
c. right-click on the print spooler service and then click Properties.
d. on the general tab, next to startup type, make sure that automatic is selected.
e. If the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.Additional reference:
Open printer troubleshooter.Let us know if that helps.
Hi, can printing Photosmart 6510 in black & white (not gray, but b & w only) when the black ink cartridge is not empty, but all the other cartridges are? If the color cartridges are not already installed, it will always show b & w?
The 6510 PS will not work if the color cartridges are empty but the black ink.
However, I think that it would be possible to print using only black ink but to do ink in the cartridges of colour as well because in case of maintenance color cartridges to do little ink in the print head maintenance routines. When the head is friendly if there was no colour ink this part of the print head could heat upward too or overheat.
Anyway, back to print in black only. You mention that you do not want t p rint in black and white so you know where to look in the driver to get to this option. Then in Word, Excel or any program, go to the print function. Click on properties. Click Advanced. You should see where you have levels of gray. If you clock in the option box should reveal the other options will be "Black Only". Select this option.
As I said you should be able to print using only black, but you will need the color cartridges ink.
Hope this helps.
The Photosmart 6510 says that it is connected to the network of law with a beep sound intense, works with a usb cable and print a test without error page. BUT nothing comes out when I try to print something with wifi. It remains in the queue. Print and scan doctor finds nothing. WiFi worked before changing internet provider and so the router (I guess that's the name of the area which gives access to the internet). Tried to turn all market again and reinstall of the printer.
The supplier offered to modify the number of IP printer, that has not helped. Using Windows 7.
Thought I had answered this, but it is not displayed on the site.
Now printing without cable USB between the router and the printer. I think it's helped the router to communicate the correct number of IP to the printer.
Anyway, problem solved. Thanks for your efforts!
My PC has recently upgraded Windows 10. I am now having a problem with the Printer Wizard.
Previously, I had the status display, the ink levels, scan document, check printer heads, etc.
Now all I get is a printer configuration screen that has 3 options
-connect a new printer,
-convert a USB printer wireless, and
-Add new software.
How can I get the correct printer assistant screen to run?
Thanks for joining the Forums of HP Support for a solution to your problem of HP printer Assistant.
I understand that you use a HP Photosmart 7520 e-all-in-one printer with a computer who has recently upgraded Windows 10 and now, when you click on the printer icon to open the HP printer Assistant you get the "connect a new printer"window. " I would like to help with that.
It is not that the HP printer Assistant does not work, but probably the printer probable network needs to be reinstalled.
I would like to start by uninstalling all software that was installed before the upgrade to Windows 10 relating to printers. Here is a support document which can help needed - uninstalling the software of the printer (Windows).
If you get prompted to restart the computer when uninstalling, go ahead and do the restart. If this isn't the case, restart the computer after the uninstall is complete.
Once the computer is ready, try to use the HP printer installation wizard for installation. This tool will find the most recent version of the printer software and installation help.
Please let me know if that solves the problem, or if you need assistance.
Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.
Printer was working fine. Had to change the cartridge. First of all, I didn't have black and now I don't have much color either. The printer says I had no real HP though now it shows that I do. I never bought my cartridges anywhere but the staples. Printing October 2012 have changed many cartridges before you buy. Followed everything I could find. Still not printing.
I read your post and see that you can not print in black or color now. I would like to help you today. If this helps you to find a solution, please click on the button "" accept as Solution"" down below this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.
Please, try the following steps to see if it will help solve the problem.
This document is for the cleaning of the cartridge and the contacts, check the tab on the cartridge and the printer reset. "Incompatible cartridge" or "indicated ink cartridge needs to be replaced" message on the c...
If the problem persists, perform a power reset. A alphanumeric Code (example: ' 0 x 'r' C2...) ") displays on the front panel when printing. Do not take into account the title.
This model has a permanent print head, this video shows you how to access the print head, so you can manually clean the printer and soak the printhead, it's my own personal recommendation, not one of HPs, is to use the solution proposed in the following videos. I suggest only doing this if the printer is out of warranty.
Once you get to the clock at 3:20 minutes, you can stop this video.
This video is for a different model but it will provide the steps to move the print head and cleaning, also if you continue the video it will provide measures to remove the print head and soaking. Play video 01:24 minutes. HP 5510 will not print black and color - print head removed and cleaned.
If you have completed all the above steps and your product still has a problem, service the product.
I hope this helps. Let me know how make you out. Thank you.
I have a 1.5 years, Photosmart 6510 B211a who works well. Now, all lights are flashing and or my USB connected PC (Win 7 Ultimate 64-bit), or my iPad or iPhone (OS 7) connected wireless will be printed.
When the printer is turned on it goes as usual, wireless and power light stay on and displays correctly (Apps, Snapfish, Photo, copy, Scan), I can print from all devices.
1. in ~ 5 minutes, no noise, all LEDs (displays the screen "Please turn printer then turn it on again."
2 "(Printer Error is lit above screen, lights beside screen and power and wireless) starts to blink in unison"
printer does not print
3, every 10 seconds, a very low "short moan" noise, like something is trying to move inside the printer
4. when power is cycled it will again be print normally for about 5 minutes and then stop again with flashing lights.
Have you tried the following.
1. hard reset (more than once - fired power and USB)
2. uninstalled and reinstalled software and drivers
For any help or suggestion will be appreciated.
I had the same problem when I moved the printer to a new PC. To end, I decided to change the USB port to which the printer is connected to. well, it worked! Printer now work correctly for wired operation and wireless.
Not sure if I got a bad USB port or that the cable was not seated properly, or if the USB port had no authority to provide the connection to the printer.
Hope this helps someont with this problem.
Photosmart 6510, SN [edited by Moderator], Firmware Version ESP1CN1244AR, 22093 ID Service, IK number 964, Version of the 028.000.1315 software. 000, Printer Driver Version 09.84.00.1173, Windows 7 X 64 operating system on 2 computers, Windows 8 X 64 on the third computer.
OK, now for the problem. I tried to print a PDF doc. The graph at the top of the doc printed on the light side, but the text does not print at all. I noticed that the ink levels were low, then bought new carts. Installed the carts, run printhead cleaner, good result mine. tried to print same doc, with the same results. A run the print head alignment. Alone cyan print and error appeared on the printer "failure of the alignment, you can continue, but cartridges are not calibrated for optimal print quality. Press OK to continue', then I tried scanning and printing a photo. the reproduction was excellent, crisp with no descernible color change.
tried to print a couple of JPEGs from each computer, all good. Now it gets more strange. A ran the doctor Scan and printing of difficulty.
print the page, the colors are good, anignment box looks good, but missing text at the top of the page. I tried printing doc, txt, pdf files of all 3 computers with no difference. If the pdf file has graphics, print, but not the text. But xls docs will be printed. I tried to print the reports ststus fom and the quality of the front panel of the printer, I me am colored boxes described and filled with color boxes, no text. Reinstalled the software on all computers, no luck.
From what you described, it seems to me that the black ink is not working. All black, you can see on pages that are feeling is probably a composite black made up of 3 colors. I can help you with this.
Please use the solutions proposed in the following document; Printer cannot print black ink or color ink, or prints blank Pages.
I hope this helps.
I am trying to print the map of 240gsm on my Photosmart 6510, which so far has worked flawlessly.
Just rolls do not seem to be able to take it, but HP confirmed that this printer must be able to take in 280gsm card. The printer doesn't seem to be something print, then tells me I have a blockage, and the card must be withdrawn to the rear of the printer with a few black spots stained on the edge of it.
I don't really want to pay their support costs HP (I'm outside the warranty period) to solve what should work just fine and is not due to the error on my part. If anyone has experienced this kind of problem before, and if so, what was the solution?
Hi people,The following table lists the input and output tray capacity for plain paper, envelopes, cards, and photo paper for both the 5510 Photosmart HP 6510 e-all-in-one printer in the series.
Hi, the book in my HP F4480 printer will not feed. The ink cartridges are nearly empty, if not empty. Weak cartridges prevent the printer from paper making to finish a job, or is it likely another question?
Thank you for joining the HP Forums!
I have seen your post on how your HP Deskjet F4480 printer will not feed paper. I'm happy to help you!
Low ink cartridges can certainly be the cause of not feed paper. I recommend that you replace the ink first and see if that solves the problem. If it does not solve the problem, go through this guide, 'on paper' Error Message on the computer and the printer is not Pick Up or paper feedand let me know what happens!
Don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.
Hope this information is useful and thanks for posting!
My printer has stopped printing in black ink. Tried several black cartridges, cleaned automatically several times, but no printerhead. The other colors work very well. I feel out of the printerhead and clean it manually, but then of course I buy another printer. Any good advice out there?
I work with XP, and all other functions works well.
Troubleshooting document here can help solve problems with black ink print do not. Make sure that the black wind don't is not clogged, as indicated in this document.
I recently upgraded my PC and installed a new motherboard. Now, I've had my C3180 printer for 5 years now, whenever I have installed the printer software, I have had no problem on one of my computers. The software in question is the HP all in one series to my printer.
Now here's the problem, after setting up my new PC, I'm trying to install the printer drivers to use the scan etc. The error is the software constantly gives it's when I try to install: cannot find USB drivers and a USB device "this computer has no support USB available for this installation. I tried the program several times and he refuses to install.
Well, here's the catch, I installed all my USB motherboard etc drivers correctly and they all work. All my USB devices, keyboard, webcam, headset all work. Now on windows 7 64-bit devices and printers, the printer is actually shown and active. I even printed the windows program help and it prints that I need to fine.
In Device Manager in the USB printer section he calls here HP Photosmart 3100 is active and has no problem at all.
This is why I can only conclude this is the stupid software refused to install because it can not detect my USB drivers even if my USBs are working very well and I can even print the printer to start! My new motherboard is an Asus Maximum hero 8 with all the latest drivers to installed
Thanks for all the suggestions that I really need to use the printer to scan using the HP software
(1) run the executable (i.e. AIO_CDA_NonNet_Full_Win_WW_130_140.exe) HP installation package
2) open Windows Explorer and type % temp % in the address bar, and then press ENTER.
3) navigate to the extracted installation folder, it will start by 7z (e.g. 7z1234S)
Note: If there are several of these files to find the most recent sort by "Date Modified".
4) go to the "Setup" subdirectory in this 7z folder.
(5) move, delete or rename the usbready.exe file which is the Intel USB System Check utility.
6) navigate the directory tree in the 7z folder and double-click the installation executable (Setup.exe)
You can see any difference now?
I just bought an iMac and have installed the latest HP driveres for my Photosmart Premium, but it seems that there is a kind of shipping between the two problem.
When something I send to the printer (and I tried a number of different software applications) it seems to take a long time to buffer, or simply not print at all.
I noticed a page or a towing cost about when printers go into energy-saving mode this can be a problem, but I can not disable the mode, there is only 5 to 15 minutes to choose energy-saving.
I seem to be able to bypass sometimes by unplugging the USB cable to the back of the computer and by him plugging in again, I guess that it wakes up the printer.
can anyone give me ideas on how to address this issue.
OK, thanks for the clarification.
Click the icon Apple and chicken software update.
Any update HP is available?
If so, be sure to install it and then check for any improvement.
I can't get my printer Photosmart D110a it will not be printed off the internet or other programs work?
I thank you for your message and gives us a chance to help you. I see you are having problems with printer.
Changes have been made to the system before this problem?
You can follow the steps of troubleshooting on this link to see if the problem is resolved.
For troubleshooting below.
Feel free to use the forum for any other issue of Windows, you may have.
I had seizures with this ugly printer. I had it on 2 yreas, and it is not worth to get a service.
First of all, he gave me grief on the ink cartridges that had been installed and work for awhile, but have been used regularly. Followed all of the suggestions until finally, I swapped the cartridges on even though I know that they were not empty and I managed to get one printed page (reluctantly - it took a lot of time) and now it won't print anything else. It prints the test page for the printer (cancel, colour) very well. I went through all the steps on aid newsletters - just as the path through reinstalled all the software after uninstalling, refreshed the memory of the printer, and al and nothing seems to help. It is clear enough, is to communicate, because I was able to scan successfully something a few minutes ago. However, it does not print a test page for the utility. It sends it, but nothing happens. It will make the test page cleaning if there is nothing in the queue. He has acted for a good while that way with our secondary machine in the other room (connected through a network Ethernet), but had never been a problem with the main machine, where it is connected via the front usb port. Tried to print from indesign cs5. I'm not on snow leopard - rather, I'm on OS 10.5.8. Any suggestions?
We will restore the print system:
-Sys Prefs, Print & Fax
-Right (control) click inside the box that lists your printers and select Reset Printing System.
WARNING - This will remove ALL your printers!
-Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.
Maybe you are looking for
Just bought a new 64 GB Apple TV. I've exhausted every effort to try to make the voice search to recognize the information in my personal iTunes library. Music finds it but that is because I paid for iTunes game.I tried to rebuild the spotlight data
Hello I am facing a weird question. My R700 - 12 k is up-to-date with the latest drivers and running Windows 7 64 bit. I created fingerprint for the windows logon. Everything seems to be working well but when I put the computer to sleep and wake him
Hello. In fact, this will be my first post here on the HP support forum. I just installed a clean Windows 8 (64-bit) on my HP Pavilion laptop 2128so g6. It seems that Windows finds most of the drivers during the installation of the system - BUT - the
Mr President, I have installed windows xp-2 successfully in my hp compaq dx7380mt and I also downloaded software driver lan of the official site of hp for the same model, but now I am unable to install the ethernet controller. Mr President, please he
I use Windows Vista 64 bit on a laptop of Ed. When I first bought my laptop 4 months ago, it worked. I have the windows switcher icon in the taskbar, but when you access the Windows I have open turn out. I get a box on the screen with all the windo