Photosmart 6520: Photosmart 6520 does not print the new colors yellow, magenta and cyan

I installed new cartridges 364 original color and now the printer prints everything in black and white only.

Before replacing the cartridges I printed black and white stuff (because the cartridges were low).

I have installed new drivers, it off for a minute, restarted.
I cleaned up and align the cartridges.

White are not dry, as I tested al with tissue.

All of this happened less than a month after the expiration of the warranty.

In properties, grayscale printing is turned off.

What could be the problem?

Well - he started working by itself after some 5 to 6 hours. All tests and diagnoses before that said nothing wrong, but the colors were simply not print at all. Then, as this, the print quality diagnostics showed color.

In http://support.hp.com/us-en/document/c03318187 step 2 tips you allow auto maintenance to complete. I suggest now just let it meditate and heal itself and do not even try the other troubleshooting steps discount. However, the few hours suggested could be more than a little. I've almost exhausted my black cartridge when running all the other tests and diagnostics, and now I'm waiting for a new... Once I get it, I'll put it in, and then let the sit of the printer for 4 to 6 hours just to settle. I hope that's enough. And then, finally, I might be able to print my document.

Would be nice, if this problem was mentioned in the cartridge installation instructions.

Tags: HP Printers

Similar Questions

  • Photosmart 6520 does not print the new black ink cartridge

    My new black ink no longer works on the printer.  This seems to be a problem throughout all of the printers HP no matter what model.  Did someone with similar problems had success getting their black to print despite all recommendations of manufacturing without success?  I have my printer just over a year.  I think it's ridiculous that a product falls down that quickly for money which is devoted to this topic.  I called HP for technical support and after doing all the things, he recommended that he told me that my printer is broken... is no longer under warranty... but he will sell me gladly one handed to nine for more than the cost I would pay if I bought it new from Amazon.  I trust is no longer the product... Why would I want one handed to nine?  Just looking for more tips out there who may have worked for others, before going out and buying an Epson.

    Had same problem, went out and bought new cartridges ink and all but worked black, what to do, throw it in the trash? or have a go at fixing, because I had just spent more than $90 on new cartridges, I thought I'd be there is attachment.

    To cut a long story short, that I managed to detach, scratching the dining room in the process, wife not impressed! puledl the ink outside, white liquor dispenser put spray gave him a good squirt, put back together, it now works like a new! Yay! Geez I'm so smart.

  • printer Lexmark Pro 200. Does not print the correct colors. I restarted my computer and the printer is off but get the same result.

    Printer Lexmark Pro 200.  Does not print the correct colors. I restarted my computer and the printer is off but get the same result.

    Hello

    • What were the changes made before the problem occurred?

    You try to run this fix and check.

    http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

    If above does not work, try contacting Lexmark support for assistance.

    http://www1.Lexmark.com/en_US/global-services/customer-support-services/index.shtml

  • HP Photosmart C6380 does not print the entire page

    My HP Photosmart C6380 will not print whole pages.  Some lines close to the end of the page are not printed.  From time to time, it prints the whole page.

    Hi mercierm,

    Welcome to the HP forums!

    I see that you are working with a Photosmart C6380 and sometimes it seems not to print the whole page and other times he does it. I'd love to help you find a solution to this problem

    To start, you are able to print an extended self-assessment report and it came out completely, or if you make a copy of a complete page, never there issues? This will contribute essentially to determine if it is the hardware or software, but since it seems to be sporadic we are not able to limit too much more. You can also try the steps of cleaning in this document "on paper" Error Message and the printer is not Pick Up or paper feed .

    Let me know how it goes for you!

  • HP photosmart 210 does not print black one color print

    I tried to replace the two times-same problem black print cartridge.

    Document here can help solve the black does not print printer Photosmart b210.  If the first four solutions do not resolve the problem of the post here can help.

  • Photosmart c4400 does not print the color of mac

    I downloaded the latest driver from printer to my new Macbook Air (OSX 10.7.1) but all prints come out in black and white. The printer works fine with my old PC running Vista. How can I fix?

    OK, so let's try the following:

    Go into System Preferences > print & Scan

    Click right (CTRL + left click on your Mac keyboard) box bottom the printers, and then click Reset Printing System.

    * Be aware, it will remove all queue wxisting

    Download and install the following Package:

    http://support.Apple.com/downloads/DL907/en_US/HewlettPackardPrinterDrivers2.7.2.dmg

    After finishing, go into System Preferences > print & scanning, click on the sign more and select your printer.

  • After you install a second WD 1 TB my book drive, Windows Explorer does not see the new drive.

    Original title: Signature Collision?

    I'm having hard to the installation of a second external drive. I use Windows 7 Ultimate RC. There was a WD 1 TB drive My Book already installed - healthy and works very well. The problem occurred after installing a second WD 1 TB my book reader. I followed all the instructions, pluuging the drive to a USB hub. Windows found the disk, installed drivers and reported the new drive ready for use.

    Windows Explorer does not see the new drive. Devices and printers shows 2 external drives from WD. Disk Management shows as 2 drives, but the second disk is offline because of a 'Signature' Collision

    Each player works very well if it's the only drive plugged in. "Eject My Book" does not work because a program (or more) are to use the player in the background (Windows or Norton).

    I installed the latest firmware and I'm still having this problem. I've been emailing WD with this problem and they are running out of ideas.

    Can anyone help?
    Thank you
    Comatose13

    Hello Comatose13,

    There is an old article of KB in Windows XP that has been recently updated with additional measures to solve this kind of problem. The KB covers Windows XP, Windows Vista and Windows 7 with step by step methods. See if that helps.

    http://support.Microsoft.com/kb/330140

    Bobby

  • HP Photosmart Series 4500: HP Photosmart 4500 printer does not print the entire document

    Printer does not print the entire document.

    @trish45,

    If you are able to print from other programs without any problems. Then we can reduce it down to the site you are using.

    Are you able to download and save the document or statement on your computer and then try and print it?

    I suggest to check on the website of the Bank and see if they have a troubleshooting section that might offer assistance.

    Thanks again,

  • Photosmart 6510 does not print in black

    My photosmart 6510 does not print in black. I presume that it was the cartridge but I replaced the cartridge and it still does not print. I cleaned the print heads and the cartridge ink levels are full.

    The printhead, cleaning of the screen failed touchscreen printer running.  But when I sat down at my computer and used the program utility printing, he did.  I ran an initial print head cleaning my computer and then clicking the button indicating that the print heads were NOT clean.  He then ran a deep cleansing process.  Then I lined up the printheads of the same print utility program.  Now it works!

  • HP Photosmart C309a does not print after I installed new black ink cartridge.

    Printer was working fine until I replaced the black ink cartridge.
    Does not print the text in black on the printer test page.
    The States new HP printer installed cartridge.
    All other colors are working well and were replaced at the same time.
    Tried cleaning cartridges - pulling the cartridge and put back in - turning the printer off and on again.
    Also tried to restart the computer.
    Could there be a problem with the ink cartridge itself?

    REAL SOLUTION. I had the same experience, spent hours pulling my hair like children had project do to school and it was 22:00.  Your cart is clogged! Here IS THE SOLUTION! (: 1) remove all ink cartridges. (2) extract the carriage that circulate in the ink cartridges by lever on the right and the trolley lifting vertically. (3) wipe any accumulation of visible ink on the outside with clean cloth or paper towel. (4) THIS IS THE KEY: keep transport under hot running water to empty all the handwritten entries in the irrigation channels that distribute ink. Keep rinsing in clear water i.e. no sign of ink. (5) trolley dry with clean cloth and blowing in areas, you can access in order to remove the remains of the water. (6) let transport air-dry overnight. (7) Re-install transport, then reinstall the ink cartridges. 8) ENJOY YOUR PRINTER. (9) I saw many entries on this topic dating back two years, without real solution offered. I am an automotive engineer in unemployment. If HP (or anyone else) would like to hire a smart worker, engineer in the Detroit area, please inform. Thank you!

  • My printer does not print the words.

    I have a HP Photosmart.  My operating system is Mac OS X 10.6.8 version.  I woke up this morning and my printer does not print the words, only the outlines of the text boxes.  It's the same thing on my other computer that is running Windows XP.  I changed the ink cartridges.  When I ran the alignment he printed the blue boxes around the page and black boxes on the right and left sides.  I also printed the word IMPORTANT! but that's all.  I ran a print quality Test and it printed blue, red and yellow stripes horizontally and vertically, thin and thick, "BOLD" and vanish.  He also printed them in parentheses and nothing in the parenthenses.  I uninstalled the printer on my Mac and reinstalled.  I got all the updates also.  This did not help.  I tried to get the updates for the printer by using the application update on the printer, but he said that none was necessary.  Help, please.

    Thanks for your concern, but I threw the thing in the trash.  It was one of your printers 'free' which uses a very expensive ink.  We have collected these printers over time so I opened one I got "free" last month.  I hope it lasts over a year.  Will you be playing with programming and I need a new driver soon for this one also?  Sorry to appear cynical, but at the moment I don't have any different attitude to the project.  I am informed that I will need a new driver for the operation of our other printer and I don't understand what was wrong with the old driver.  We did nothing.  It should work!  I just want to print, words!

  • Printer does not print the entire page.

    original title: printer does not print the entire page.  Sometimes it will display only the left 2/3 of the page. It is running Vista and the printer is a HP Photosmart Premium.

    Problem HP printer.

    Ask in a forum HP or HP support.

  • Does not print the jpg files

    3050 all-in-one J610a does not print the .jpg files more...

    Right-click on the file name. Go to "open with". Now select the paint. This will open the image in paint application. Go to the drop-down list at the top > select print > select the correct printer icon > click on print. Check if it works.

  • LV does not print the barcode fonts

    It's the VI, I created to print a barcode. I set up the type size and police and then sent to the printer. But LV does not print the right font. When I made the same format in WORD and print, print correctly.

    Barcode font, I used is not installed on the local PC, but it is available in the printer driver. I guess this is the reason why print all fines. WHY CAN'T LV?

    You can simply use the TCP protocol to establish a connection to the printer on port 9100. The printer is set up to automatically close the connections that are inactive after 5 minutes. If you send only from time to time the label you must close the connection and reopen it when you send the next label. If you send a relatively steady stream of labels, you can leave the connection open.

  • DeskJet 1515 does not print the bottom of a page

    Hello Andrew, could someone help me cause I don't know how to fix it. my all-in-one deskjet newly purchased 1515 series does not print the lower part of the page. for example, I insert a border line and then when I press ctrl-p printing layout page showed that the bottom border was not there despite the margins are correct.

    Hello Aldwin06and welcome to the Forums of HP, I hope you enjoy your experience!

    I see that you have problems with your impressions.  I'd love to try to help you, but I need some information first. I'm a link a few HP Support documents below that will show you how to find what operating system you are using. In addition, if you are using Windows, please indicate if your operating system is 32-bit or 64-bit. With this information we can provide you with accurate information.

    Mac OS X: how to find which Mac OS X Version is on my computer?
    Operating system Windows am I running?
    Is the Version of Windows on my computer 32-bit or 64-bit?

    In addition, this problem occur when printing several programs?

    Please let me know what you find.  Thanks for posting on the HP Forums!

Maybe you are looking for

  • 9.2 TVOS iCloud photos as screensaver

    I just installed TVOS 9.2 on my Geb 4 Apple TV and I can't get my photos to iCloud as screensaver. When I go to the screen saver menu in the settings need me for my photos, but there is no button to make screensaver. I don't have a recent photo album

  • Camileo S10 clicks in sound and in drops in volume

    Hello Yesterday, I bought the Toshiba Camileo S10 camcorder.Everything seems to work fine apart from the sound which is unacceptable. Here's the problem: I record a video on playback on my computer the pop sound every now and then randomly and enjoys

  • LabVIEW and TestStand compatibility chart

    Hello There are various compatibility tables LabVIEW NOR as this Web site but it seems not to be a LabVIEW and TestStand compatibility chart. I think I found my answers, but I had to get through all the Notes version of TestStand to get.

  • I can't open all folders or my computer.

    I have windows 7. pleaqse help. I can't open all folders or my computer, I have windows 7. pleaqse help.

  • Onion skin color option is not available

    An option is not available in the preferencesMine:Tutorial on the Adobe Web site: