Photosmart 6520 print not in black after I installed the new cartridge.

I just replaced the black cartridge in a Photosmart 6520, and it will not print in black. Color cartridges print very well.

Appreciate any help.

Thank you

Summer2

Thanks to YouTube, I have set the printer. The screen under the black cartridge has been blocked. He just needs cleaning.

Tags: HP Printers

Similar Questions

  • HP 5510 will be not printed black before and after you installed the new cartridge. the specified controls did.

    Photosmart HP 5510 will be not printed black before and after you installed the new cartridge.  The specified controls did.

    Yes, I was referring to manually clean the print head. I see that the 5510 lacks the possibility of leaving the print head manually.

    You can click on the menu of your SETUP program on your screen and go to TOOLS and clean the print head from there.

    If this does not resolve your problem, you may need to replace the print head.
    Contact HP Total Care (1800-474-6836), and if your unit is under warranty, its free.

    Let me know if this can help, thank you.

  • Keyboard keys not working only after you install the new OS Sierra

    I just install a new one copy Mac OS Sierra, but after that the keys on my keyboard don't work properly as some of the keys do not work yet at all. What can I do to solve this problem, and also if there is any software I can use to test the keys on the keyboard works properly or not

    See if you have enabled mouse keys. Other users have reported that after update to Sierra

    OS x: Impossible to type while mouse keys is enabled - Apple Support

  • My photosmart c309a print or copy black ink. I replaced new w ink but still does not

    I have a mac.  My photosmart 309 c has suddenly will not print or copy of black ink.  I cleaned the print heads, tried to align (not that), went out & soak the cartridge printing and eventually replaced w / new black ink.  Still nothing!  When I print, I get a black ink when I try to align, but nothing.  Color will print.  Same problem when I try to copy - no black but will get color.  What should I do?

    I finally had time today to try the method of back.  It worked!

    I took out the print head, continually ran hot water into the Pan so that the water has never been dirty (about 1 inch of water), has run a small flow of water in the black on the top screen that I determined that I had nothing to lose, gently dried the electrical parts and put it immediately into.  Turned on the printer, he crossed the alignment, etc. and printed black (and colors).  Just copied too dark.  It took me about 10-15 minutes for the whole process.

    Hope this works for others.  Thank you all for the input.

  • After you have installed the new cartridge HP do not print black ink

    HP Officejet 4620, Windows 7... installed new HP black ink cartridge and now it will not print black at all. I followed all the advice line in the help section, even cleaned the vents on the cartridge itself but shows only the white page. No error message is displayed. Diagnostic ran and says it all works correctly. Also cleaned printheads through 2 cycles still nothing. Any other suggestions? It was working fine before inserting the new black ink cartridge.

    Hi Teresa1960,

    Welcome to the Forums of HP Support! I see that you are facing some print quality problems on your HP Officejet 4620 you cannot print in black ink.

    You have completed all THE steps listed here: printer does not print black ink or color of ink or prints blank Pages, without success.

    Please note: there are three stages of print head cleaning. Three steps if necessary. If the print head is badly clogged, it may require another round of cleaning. If so, wait 30 minutes after the last step of cleaning (third) to start the first stage of the cleanup process.

    If you are unable to print in black ink, I think that the issue may be the printer and not the cartridge. I highly recommend call you our technical support at the 800-474-6836, I'm sure they will be able to help you regardless of the status of the guarantee. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://www.HP.com/cgi-bin/hpsupport/index.pl

    Thank you

  • Photosmart B110e: Photosmart B110e print only in black after reset

    Because one of the rolls were filled with black color and then influenced the paper with the black dye, I decided to disassemble the machine to the roller cleaning and cleaning mechanism on the right side. Now black print is ok, but cyan, magenta and yellow was very low. I tried to clean the printheads several times, but apart from that I have spent a lot of ink, it has changed nothing.

    Since I'm sure that the machine's physical in order, I thought that the whole system may have to be reset. Here I could have made a big mistake. I chose to do a total of redefinition and now color cartridges apparently not activated.

    There are brand new original HP cartridges in the machine, but I confess that I sometimes used without originality. The problem with discoloration of the paper began, when using non original cartridges. Them I'm not going to spend more, but I would like to have the colors in return.

    What should I do when I have more cartridges that accompanies when I bought the machine?

    Hi @jlund6,

    You may need a full set of cartridges of installation, or a new printhead. In my view, that a new printhead comes with cartridges installation, but honestly, if I were in your position, I would consider a newer printer. If you call us, we may be able to offer a discount on a newer model. What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:

    Step 1. Open the link: www.hp.com/contacthp/
  • Photosmart 6520: Photosmart 6520 Print Null Imiging update fails to install

    Update Windows 10 every day shows that the HP Photosmart 6520 Imiging Null print update could not be installed.  My printer works fine, I have uninstalled and installed the current driver, when I have the printer check updates, it says that the program is updated.

    Is that what I can do to stop the daily message installation failed in Windows Update?

    Thanks - I've downloaded the Windows 10 "show or hide updates.  Ran and he admitted to select updates, I want to hide.  I did, he ran again and updates from HP problem now presented as an update hidden.

    Go see it, but I suspect that the judgment of the constant will install attempts.

  • HP Photosmart C6280 prints not Magenta or Light Magenta even with new ink cartridges.

    Our HP Photosmart C6280 has always produced excellent results, but all of a sudden it won't print Magenta or Light Magenta, although they show of 75%.  We even tried to put in new ink cartridges, but they still does not print.

    Hello

    As OEM HP is responsible for the good operation of the printer and their drivers. Check with
    HP support, their documentation online and drivers and ask in their forums.

    HP - Photosmart C6280 - Product Support and troubleshooting
    http://h10025.www1.HP.com/ewfrf/wc/product?product=3194498&LC=en&cc=us&DLC=en&lang=en&cc=us

    HP - Photosmart C6280<- set="" to="" your="" version="" of="" windows="" for="" the="" proper="">
    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3194498&LC=en&cc=us&DLC=en&lang=en&cc=us

    Support HP & drivers
    http://welcome.HP.com/country/us/en/support.html

    Contact HP
    http://welcome.HP.com/country/us/en/contact_us.html

    HP forums
    http://h30434.www3.HP.com/PSG/

    =============================================

    These might help:

    Add or remove a printer
    http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

    Solve printer problems
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

    Open the printer Troubleshooter
    http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

    Find the manufacturer's Web site
    http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

    Find and install printer drivers in Windows 7
    http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • I saved mybookmark tabs, history, addons, preferences. But after I installed the new copy of Firefox, I am not able 2 synchronize my data in my Firefox. WHT shud - I do?

    I had backed up my data (bookmarks, preferences, tabs, history, modules) using Firefox sync. I formatted my PC and install a NEW copy of Firefox. But when I tried to restore the data using sync FF and after connecting successfully, they showed me a notice saying that "Firefox will start to sync temporarily" but my data has not been restored. What should I do to retrieve the data I saved?

    Firefox Sync is not a backup service unfortunately. Please consider in the future to save your profile locally before you reformat your computer. Backup and restore Firefox profiles information

  • Windows does not restart after you install the new hard drive.

    Hi, I upgraded from 100 gig 250 gig drive hard nice clean installation, worked perfect. Turn off the laptop, turn back on and only bios are accessible, without window, just a black screen with a small white bar flashing at the top of the screen. Put old drive in, everything works fine and in disk management the new shows drive but are not accessible? Anyone got a clue?

    Now I found the answer to my problem. Acer Aspire9802 WKMI recovery allows only 32 GB max loading mbr, therefore partitioned readers with a free majorgeeks.com partitioner and ye he

    The free program, I called EASUS PARTITION MASTER, dead easy to use for a novice like me! and with an instruction book complete in pdf format

    every 4 years, 21 '' screen singin' and laptop dance - now considered to be old!

    I guess if the sata drive is the same sata version as controller on your laptop, that's to say sata 1 or 2 or 3
    And if a later version of the sata it's backward compatible?

    Use the utility disk provided by the manufacturer of the drive check

  • error code when sent for test printing after you install the new printer on windows 8

    Installed a panasonic KX-P1121E printer on windows 8. I got an error code when sending for printing of the test. And not able to print. Help, please.

    Hello

    Please provide more information for me to better understand the issue.

    1. how the printer is connected to the computer? Is it wireless or wired?

    2 do you have updated printer drivers?

    3. What is the full error message you get when you try to print?

    These steps will help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing.

    Method 1: check if the printer is correctly installed.

    You can check the link for more information about how to install a printer.

    Install a printer

    http://Windows.Microsoft.com/en-us/Windows-8/install-a-printer

    Method 2: you can check the link for the troubleshooting steps.

    Solve printer problems

    http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    You can check the link to download the drivers.

    http://Panasonic.NET/PCC/products/printer/windows_compliance/windows_8.html

    If please get back to us and let us know if this helps to resolve the issue.

  • OfficeJet 4500 said Offin printer after I installed the new print cartridge

    Don't use Windows 7 but no window 8.   Just installed a new print cartridge and now it says the printer is offline.

    Glad to hear everything is working very well for you. If you encounter other problems, feel free to ask.

  • HP 7550 Photosmart printer range gives me an error message "color cartridge failed. Install the new cartridge.

    I installed a new tricolor cartridge and it still gives me the same message. I am very frustrated at this point. He now will print mode reserve with the cartridge removed. Help, please! I bought the color printer to print in color!

    Thank you

    jdokos95

    I enclose a link that might help you. Let me know how it goes.

    Click here for the link.

    Let me know how it goes.

  • HP Pavilion p6-2: problems on blocking down after I installed the new power supply on a p6-2207ep

    Hi all

    B4 explaining my problem, I really don't know if I should post this in office, or material in this section of the freezes/crashes/locks but since I posted in freezing section and no results I decided to try here.

    My pc: http://h20564.www2.hp.com/hpsc/doc/public/display?docId=c03382032

    I bought a new PSU: XFX TS 550W 80PLUS BRONZE for the GPU upgrade 380 R9 I was planning to do.

    Is there some BIOS I get HP for this cause of power supply from what I read, if I not only one of the things like manufacturer reset to the factory settings may stop working... Currently, my Bios version is 7.11...

    Problems with the new power supply:

    When I closed windows 7, the first problem, the picture freezes on the screen that says "blocking windows down", I waited a bit and nothing, tried to turn off the machine while keeping down the power button but nothing to disable directly in the rear switch of the PSU...

    Second time happened a little different soomething, seconds after freezing again on the screen that says "blocking windows down" windows actually turned off and the screen is off but everything inside the computer case continues to flow fans in light of the power button / stop and was also able to close by keeping pressed power button...

    When I restart the computer, to which some time stops, and only after a few seconds, it turns...

    Also tried the GPU with the new PSU fans worked but no entry in the screen that I guess just a power supply problem.

    ATM, I'm RMA waiting to know if it is a power supply defective or not...

    Problems after the reinstallation of the original material:

    Some of the same problems when I got the new PSU remained namely:

    Windows actually stop and the screen is off, but everything inside the computer case continues to flow fans in the light of the button on / off and was also able to close by keeping the power button...

    When I restart the computer, to which some time stops, and only after a few seconds, it turns...

    What I've done so far to try to fix the problem:

    Restore windows 7 to a b4 point the hardware installation.

    Reset the BIOS

    Hard reset

    Clean boot

    Do you have a full checkdisk which means 0 KB in bad sectors...

    A complete hardware checked all tests with the HP software

    A system file check everything beautiful

    What I fear most is a faulty PSU that may have caused damage to my equipment mainly the motherboard, but could be something else entirely.

    Maybe I need a specific BIOS for that motherboard / PSU combo, but after returning to the source material, the problems remained.

    What I can do because I can only make the software tests since I don't have an extra PC to test the parts...

    Hello

    Disconnect all external devices except the keyboard and mouse when you try to solve the problem.

    Disconnect the PC and removed the CMOS battery.  Press and hold the power for 30 seconds.  Now, replace the CMOS battery and plug the PC give a TI a go.

    Your PC is not stable enough to make a BIOS update. Do not attempt to use the graphics card XFX until your PC is stable enough to make a BIOS update.

  • Certificate of authenticity will work after you install the new copy of Windows 7 64-bit?

    * Original title: COA

    Hi all

    I bought a used Dell laptop which still has its COA on the bottom of the unit.  Apparently the device was installed with Win 7 when new.  I would like to install a new copy of Win 7 64 bit, but would not know if the COST I would work since there is no information if the original installation is 32-bit or 64-bit.   Thanks for any information you could share with me.

    TT

    The COA will work as long you have correspondent reinstall media:

    For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

    It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

    Given that this option is no longer available, what are your options? See the article for more details:

    How to: What are my options for Windows 7 reinstall media?

    Make sure you scroll down and read the section:

    What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

    Other options:

    Step 1: Download a copy of Windows 7:

    For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

    It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

    Given that this option is no longer available, what are your options? See the article for more details:

    How to: What are my options for Windows 7 reinstall media?

    Make sure you scroll down and read the section:

    What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

    Step 2: Perform a custom installation, see Windows 7 section of the following article how to perform a custom installation:

    How to: perform a customized Windows installation

    Step 3:

    http://techingiteasy.WordPress.com/2012/04/13/how-to-activate-Windows-7-OEM-license-using-a-retail-disc/

Maybe you are looking for