Photosmart 6525: auto efax print photosmart 6525

Similar Questions

• 7520 photosmart all in one. How to disable auto clean print head

  I have the HP Photosmart 7520 and I am running Windows 7. How can I disable auto cleaning feature print head?

  Using function Thi my ink so that I am not the same impression.

  Hello

  To answer your question, unfortunately you can not disable this function where the print head will not clean itself. The printer is made to do to keep the printhead to collect ink on the inside contacts.

  I hope that answers your questions.

• Efax print

  Photosmart 7510 isn't printing of efax.  I have the correct email address and you can send an email and it will print.

  If I go on my account ePrintCenter it wil show "Print" and efax Messagedu etc.  However the fax failed to print

  on my printer.  EFax parameters are correct and Seth for on.  It shows faxes sent 2 faxes received 0.  If I look at the received faxes it shows nothing.  Web services are enabled.  All other services are running without any problem.

  Dennis

  I thought about it. It will print a page telling me that I received an eFax. So I go to eFax read the fax. The fax will not be printed on the printer with the free service. I need to download eFax reader and then print. A bit lame, but you get what you pay for.

• C6280: Select Auto duplex printing

  Hello:
  I use an HP running Windows Vista 32 bit Home Premium laptop.
  I had already completely uninstalled my HP Photosmart C6280 all-in-one printer.
  Today, I reinstalled it using the CD-ROM supplied with the printer.
  When I went to print a MS Word document, I have not received the normal game
  Print settings/options to choose.
  I could not choose automatic double sided printing: it was not in the drop-down list.

  When I chose to print from the file menu of Word, a print dialog box open: this is the title was the HP Photosmart series 6200 Document properties. From within this framework, I chose:
  Properties > tab shortcuts printing > general impression every day.
  in the lower right of this Panel, is a menu drop down titled "print on both sides.
  It offers the following options to select:
  Off, manual, booklet from left edge, right edge booklet.
  The "Automatic" option was missing from this list: previously it was manual above.
  I don't remember if the border left/right options were there before.
  Directly below this menu drop down is only for the selection of Orientation: Portrait or landscape.
  So now I'm unable to print 2-sided automatic.
  If I click on Duplex instead of General Everyday, I have briefly see the automatic word in the menu, but is replaced by manual. In addition, for this mode Duplex, Orientation drop me u is missing/hidden. I don't know if this is supposed to be that way.

  The problem: why I have more option to automatic 2-sided printing?

  Any ideas?

  Thank you

  DaleBr

  MSS1 wrote:

  Addendum - I just "Device settings" under printer properties (by right-clicking on the device icon in the Panel control/devices & printers) and found the menu option drop down to 'install' double-sided printing. guess that's what you mean. Thank you!

  HOWEVER, you CAN duplex from a computer hooked up wireless?

  ----------

  The link to the Vista/Win 7Duplex printing troubleshooting guide does not work.

  I have the same problem with my C7280 and Win 7. Originally, this computer was connected wireless, who apparently does not have an automatic duplex setting. (I had to reload the driver several times with the help of HP to properly operate wireless because the HP Solution Center was not available...) Anyway, I have now linked the computer to the C7280 by wire... and duplexing "automatic" is not available. " Where can I find the option "enable double-sided printing? Or do I have to uninstall and reinstall the driver again? Thanx

  The duplexer should be available if wired or wireless.  The link for Vista/Win 7 Duplex Printing Troubleshooting Guide is here.  Sorry for the fault of previous hits, I've also updated the previous link.

  For Windows 7, click Start, devices and printers, click with the right button on the settings of device Photosmart c7200 series printer properties and the duplex unit installed, apply the value.

  

• HP LaserJet Pro M201, PCL: Copy of M201 guard auto install printer

  Microsoft SP3, WIN 8.1;  HP laserJet Pro M201 USB directly to the port of docking and wireless to accommodate off-site (in-NETWORK) printing.   Also have HP AIO, which has only one version of the driver.  No copy is created at startup or the awakening of sleep.

  XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

  Each time you start the SP3 installs a copy of my printer Laser (M201) (auto).

  I manually remove the copy and the pouf!  He returned automatically as soon as the next awakening or startup.

  How I can (or should I) avoid this?

  Please be very detailed.

  Microsoft Surface Pro 3. 256 GB hdd, 8 GB of RAM. WIN 10; Docking station; 4 TB WD My Cloud mirror SAR for the storage file. HP LaserJet Pro M201 and HP OfficeJet Pro 8610 AIO. HP Elite 8000 Slim, SFF, Core 2 Quad 2.83 GHz, 8 GB RAM, 750 GB HDD, WIN10 (used mainly for broadcasting and as a PC Backup)

  Hi @rjl24,

  Thank you for visiting the Forums from the HP Support! I see whenever you turn on your HP Laserjet Pro M201 it reinstalls the software on the computer running Windows 8.1 operating system.

  I would like you to run printing HP and doctor Scan > www.hp.com/go/tools

  -It has been designed by HP users troubleshooting and problems characteristic needed to solve many common problems encountered with HP print and scan products related to Windows computers.

  It finds problems with the drivers and software, you are now able to switch on the LJ without the software itself reinstall? If you still experience the problem, please let me the following information:

  1. how you originally installed the software and drivers, CD, download the software or HP printer installation wizard?

  2 printer is connected by USB or wireless, you use a HUB?

  3. do you receive any error messages?

  I hope hear from you soon, please let me know what is the PSDR.

• Difficulty for eFax print on Photo paper and not ordinary paper

  If you have recently faced the issue where when you receive an eFax, it is print on photo paper and not ordinary paper, it is because your account is configured to receive jobs as a .tiff instead of .pdf files files. If you wish to have this resolved, send me a Message private with the following information:

  • Customer name:
  • EFax number:
  • New or old account:
  • When he started to question:

  This should solve the problem for you.

• HP Officejet Pro 8600 Plus auto conversion print fax

  Hello

  When I click on print a document, a pop-up window appears to send a fax.

  I need to print the document, but it is currently not possible.

  Any suggestions?

  Thanks, PACullen

  Suggest you reload the software again.

• Auto duplex printing is not available on Windows 8

  Automatic duplex printing works fine on my other windows systems.  The printer Web page shows that automatic duplex printing is supported / installed.  I can do when I print from my system windows XP very well, but my new system of windows 8 is not.  "I installed the latest windows printer driver 7 and options ' 2 sides print ' do not give automatic as an option.

  Is there a driver solution or something that needs to be done to get automatic duplexing on windows 8?

  Duplex printing one of the main reasons I bought this AIO, so which are important to me.

  Help.

  Thank you.

  The duplexer must be enabled in the driver, see the Vista/Windows 7 Duplex Printing solutions to the problems here.  Windows 8 would be similar to Windows 7 in the procedure.

• the printer does not print and it starts off auto did print a test page but used like other

  off the printer that's happened and does not print when its on. thor troubleshooting and ed went a try but wont print print something else.

  Most often when a device does not work, it's because the driver has been corrupted.

  Try reinstalling your.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• HP photosmart B110a: change in router, need to change the IP Address of the printer.

  I have a HP photosmart B110a and Windows vista.

  Previous using of my router, I put a static IP address.

  Now, I have a new router and I can not change the IP address of the printer.

  I've already tried

  Factory reset the printer (IP address does not change)

  Turn off/on router/Printer PC

  Type IP address of the printer to the current address in the browser (the page does not exist)

  Connection USB and USB current running to the wireless program that generated the following message "the PC and the printer are connected to different networks (192.168.1.0 and 192.168.0.0).  They must be connected to the same network.

  My Network Setup page shows that I am connected to the identifier SSID is correct

  IP 192.168.0.19

  Subnet mask 255.255.255.0

  Default gateway 192.168.0.1

  Really need help, thanks, George

  Run the wizard from the front panel wireless configuration, then set it to DHCP Auto IP printer.

• Unit Auto-duplex of PSC 2410 Photosmart all-in-one

  I bought a new computer that uses 7 (64 bit) of Windows operating system. I have attached a PSC 2410 Photosmart all-in-one printer. The auto-duplex feature is no longer available, manual duplex printing is available. When this printer was attached to the previous auto-duplex printer unit funtioned perfectly. Only change was to the old unattach & reattach again.

  This problem can be resolved or do I use the manual funtion?

  The duplexer must be activated as described in the "Vista/Wixndows 7 Duplex Printing Troubleshooting Guide".

• LaserJet 1536dnf: after the spell white blank page printing order

  When I look at the interface everything seems ok, but when I print a report page, a blank white page comes out.  Here is the printing configurations;

  Auto continue: Off

  number of Copies: 1

  Courier font: regular

  Orientation: Portrait

  Monochrome RET: on

  Large A4: No.

  Monochrome resolution: 600

  Monochrome Bits per Pixel: 2

  EconoMode: Off

  Print density: 5

  IO time: 120 seconds

  Jam recovery: Auto

  Personality: Auto

  Print PS error: Off

  PS wait Timeout: 300 seconds

  any help will be much appreciated. Thank you

  Thanks for letting me know the automatic test is not printing or @goivagoi.

  It looks like a problem with the toner, material or fuser.

  Power cycle the printer and then try the self-test: printing Pages of information.

  You use Genuine HP Toner?

  What is the level of toner?

  Were you able to print before with this toner?

  If it is a new toner, make sure that all orange, material of packaging and the seal is drawn in ink and the printer packaging materials. Here is a picture of the ink and orange packaging which must be removed.

  

  Check if the drum unit for damage:

  1. remove the cartridge of toner product and check that the tape has been removed.
  2. check the memory chip for damage.
  3 examine the surface of the imaging drum on the bottom of the toner cartridge.
  CAUTION: Do not touch the roller (Imaging drum) on the bottom of the cartridge.

  His fingerprints on the imaging drum can cause print quality problems.
  4. If you see the scratches, fingerprints, toner or other damage on the imaging drum, replace the toner.
  5. If the imaging drum does not appear to be damaged, rock the toner cartridge gently several times and reinstall it. Print a few pages to see if the problem is resolved.

  Please provide detailed results if the problem persists.

  Thank you!

• OfficeJet 5740: efax for officejet 5740

  How to configure the fax using efax?

  Hi @billharlan

  Welcome to the Forums of HP's Support. I see you want to learn how to set up your printer Officejet 5740 so all eFaxes that your receipt is printed.

  I presume that you have connected your printer to your wireless network or it is connected by an ethernet cable to your router so that the printer has internet access. I'm also assuming that you have already subscribed for eFax.

  To have your eFaxes printing on the printer, you must configure the ePrint printer function. Please start with the code of request to printer. You can use the e-mail address of the printer default ePrint to enter your eFax for an e-mail account to receive faxes too. If you want, you can customize the address of e-mail to HP ePrint.

• Cannot print on a Brother printer after Windows Update

  We share the same brother MFC-8660DN on a network (Win XP x 4 & Win 2008 Server x 1), everything was fine until yesterday (16/09/10). 2 XP computers cannot print (Status: printing error) just after the recent update of windows installation (windows auto update has been set for each week). When we tried to print to the brother printer, he would be stuck in queue for a minute and a bubble pop up "document cannot be printed." 2 computers work fine otherwise. Everything works normoally and can be printed to another printer like Canon. (PS: I tried to uninstall and reinstall the brother printer driver, but no luck the question of setting)

  On the other hand, the other 2 XP did not have an update, and so they can't always print on the Brother printer. Also, Win 2008 server doing a windows update auto but print very well so.

  Therefore, I believe that the update of windows XP must have something to do with the printing error. Is there a fix or update? Alternatively, we can uninstall the recent windows update (only one?) to solve this problem? I'm not sophisticated OS, do not know what could be uninstalled. Help, please!

  I received a call from a client 2010-Sep-16 that they could no longer print
  on a network printer from any workstation.

  Workstations have Vista Business 32 and have been updated morning of September 16.

  The server is Server2003 & printing it still worked well.

  Printers using IP ports very well for more than 2 years.
  Fix was to use instead of the intellectual property & create ports with the full share name.
  
  The IP address of the printer had not changed AND
  I couldn't always navigate with IE8 (using IP address)
  printer see printer configuration data

  Workstations are Server 2003 domain

  This trick of name full-fledged was how I had to put in place
  Vista Home Premium workstations
  to use network printers in home networks.

  Why Vista Business "updated" settings for Home Premium?
  Is this a permanent 'update '?

  Why no matter what version of VISTA do this?
  Windows 7 has the same problem?

  With Vista Business 32 (short-term)? solution was to change the port to a local port with full sharing of the printer name

  See you soon

• 477dw Pagewide Pro MFP: MFP Pro Pagewide 477dw tries to print to tray 2 documents and envelopes for Tray1 in word 2010

  Set up the new printer and printing from Word 2010
  Printing documents to default tray 2 works fine, but when you try to print an envelope in Tray 1 it always says that we must put the envelopes in tray 2 even if in the shortcuts in printing preferences, we have selected 1, tray with envelopes, for this document.
  Also tried auto select paper source and no change.

  What would be ideal, that's what we had with our old HP printer where you click on print and it went to the default (tray 2) Letter/A4 paper tray, but if you put something in the manual feeder (Tray 1) it would print automatically on this site until he missed and then switch back to the main tray (tray 2).

  Pulling my hair out over the new printer so any help would be greatly appreciated.

  BTW.
  Tried to file a case of pension, put in the serial number and it says this product not supported by this site, click here to go to HP enterprise.  Tried to submit a case of pension to enterpise and got the same message pointing me back the first page, so just round in circles, I can still apply for assistance.

  Hello

  I understand that you are having trouble with printing to different trays on a PageWide Pro printer. I want to help you with this. There are two pieces to this puzzle - the printer settings & settings on the computer (in an additional post, I'll add more details)

  PageWide Pro has the ability to support your ideal scenario.

  What would be ideal is what we had with our old HP printer where you hit print and it went to the default letter/A4 paper tray (tray 2)  but if you put something in the manual feed (tray 1) it would print automatically on that instead until it ran out and then switch back to the main tray (tray 2).
  

  The printer settings

  • Tray 1 set to any size and any Type
  • Configure tray 2 (+ other trays) to the paper size and type in the status bar
    • Configure the status bar by opening / closing the tray and using the size/Type prompt - provided it clears any existing stored measured value.
  • Manual feed set to OFF (manual feed replaces the Printer Auto Select Paper Source setting) (not a factor based on your description)

  Driver settings

  • The important thing is that your print job is sent using the configuration of driver Paper Source>printer Auto Select.
  • Make sure that paper in the word document settings match the status bar settings previously configured on the printer

  At the beginning of the print job, if the media is present in the Tray 1 (Any/Any value) and the print job is sent "Printer Auto Select", tray 1 we'll pick first until the media runs. (The printer will assume that you have placed media in Tray 1 which corresponds to printing)

  However, if the media is placed in the Tray 1 in the middle of a printer Auto Select print job, media will be very probably not selected. It is important to maintain the consistency of the size of the print media & type.

  Kind regards

  Jay