Photosmart 7510: HP 7510 abruptly stopped printing and now think all inks are running low

Similar Questions

• Photosmart C309 abruptly stopped, printing black ink (any solution?)

  My HP Photosmart Premium C309 suddenly stopped printing black.

  Everyone recognizes this problem and has a solution?

  I tried to unplug the power plug, power switch, cleaning of the printheads several times (manually), cartridge to give a little air, checked the connections, replacement of cartridge again. Nothing helps.

  Browse the internet: it seems that this problem occurs with the most HP printers.

  See for example: some forum someone temporarily solves the problem by performing cleaning operations for (more than) 7 times, which cost five new cartridges to replace, and after a month or if the problem recurs.

  I wouldn't do this because I don't want to empty an another XL cartridge and then discover the problem recurs.

  The printer (bought in April 2010) is connected through the USB port on a Mac Pro 8Core with OS - X 10.6 (I always use only paper HP and HP original cartridges)

  Thanks for your help in advance.

  Y.S.,

  This "Absolutely" worked for my c309! He started printing gray yesterday, then I finally got the blank pages. My first thought was that HP has screwed me again! lol but I tried the post above... I have unplugged the printer for more than 25 seconds, held down the 3 and # buttons simultaneously for another 25 dry more plugged in printer and now the buttons down then made for another 25 sec.  Had to reset the lang. and the country, but after a few minutes he printed a perfect test page and I was able to print all my docs now!  It was a solution easy vs on the removal of the water and heads/cartridge, etc.  I would try this first and if it doesn't work, then you can try other patches. Thank you!!!  Good luck!

  Erisso wrote:
  

  HP Photosmart Premium C309 didn't not print black

  You have this problem too, black wouldn't pring but would be printed dark gray?

  What I did and it worked has been reset to the factory settings, unpluging the printer during ± 25 seconds

  3 and # for and other 25 seconds went and after pitting power back on

  then re-registering your setting, all wet very well

  Jumps, this will help others

• Got paper stuck in the printer and now will only print proofs. How to reset the printer

  Got paper stuck in the printer and now will only print proofs. How to reset the printer

  It looks like you may have some saved jobs in your queue that need to be removed.

  Here's how:

  To clear the print queue, stop the print spooler service and delete all the jobs/print pending.
     
  You cannot delete all print jobs in the queue so that the Print Spooler Service is running.
        
  To stop the Print Spooler Service, click Start, run and enter in the box:
         
  services.msc
         
  Click OK to open the Services Applet.
         
  Locate the Print Spooler Service, right click and choose 'Properties' and then click on the "Stop" button to stop the Print Spooler Service is running.
     
  The option "Startup Type" of Service properties print spooler is usually set to "Automatic" (which is now a good time to check it out).
     
  If the "Startup type" is not set to "Automatic", set the "Startup type" to "Automatic" If that is your desire (which now is the time to check it out).

  Do not try to start or restart the Print Spooler Service immediately.  You must remove all print jobs backed up first...
     
  Then, delete all updates pending upward and forward to printing from XP.  If they do not print before, you will need to send the to the printer again.
     
  Using Windows Explorer, navigate to the following folder (assuming that Windows is installed on your C drive):
     
  C:\WINDOWS\system32\spool\PRINTERS
         
  Delete all the print jobs in queue (select and delete all the files) in the folder if the folder is without waiting for print jobs.  The folder must be empty when you are finished.
         
  Reboot your system and check the Print Spooler Service again to make sure the Print Spooler Service restarts automatically restart (given that the startup type is set to automatic).
     
  After the reboot, check again the Spooler Service for printing and the 'Status' column for the print spooler must be read "started."

  Submit new failure of print jobs.

• on my laptop of his fathers ' key stopped working and now he cannot get on his laptop because the password has a S in there.

  original title: laptop trouble

  Good so recently on my laptop of his fathers has ' key stopped working and now he cannot get on his laptop because the password has a S in there. He tried to clean the key to bored all possible ways, and nothing works. He wondered if he had a Ctrl function that would allow him to put a s with the key or bypass the password lock. Also, it has no access to a USB keybored.

  If the account in question was not the built-in account named Administrator, and then log on to that account and go to control panel > users to change the password.

  The password for the administrator built-in account is blank (no password).

  To connect to the built-in Administrator account:

  Reboot safe mode: press F8 immediately after power on.  The administrator account is displayed on the homescreen mode without failure.

• I've updated my iphone5 to IOS10 and now my old photos are blurred. He said: "no account icloud don't set up-missing userRecordID. IM connected to my Icloud but...

  I've updated my iphone5 to IOS10 and now my old photos are blurred. He said: "no account icloud don't set up-missing userRecordID. IM connected to my Icloud but...

  Hello Dulceallison,

  Please ask questions on iCloud and photos after the iOS 10 update here in Apple Support communities. We don't like hearing about questions after each update or upgrade. I am pleased to offer you some things to check to help you with your photos are blurred and alerts that you have received with iCloud.

  The first thing we want to make sure is that all your data is safe. You can perform a backup to iCloud or iTunes. Use this article to help with this: backing up your iPhone, iPad, and iPod touch.

  Once your data is safe, we need to verify your configuration and ensure iCloud library is enabled and check if you are using the storage optimization feature. Please open this help link: iCloud photo library. There is a section on titled mid-race "save space on the device. He talks about the storage settings optimize. When this option is enabled, you will get in their original, high-resolution images of resolution lower, while iCloud library keeps all your photos and videos. You can check and see what images are stored in iCloud by clicking on this link: icloud.com, sign in using the same Apple ID that is connected on your iPhone. Click on the Photos. If you use iCloud photo library, you will be able to see all your photos. Upstairs in the Center, it allows you to see Moments or Albums, and if you scroll all the way down it will tell you how many photos and videos that you have. Also, some scroll down and try to check a few who appear fuzzy on your iPhone. Icloud.com are also blurred it?

  If you use iCloud photo library, and even if you see lower resolution versions of the photos on your iPhone, they should not be blurred. Make sure that you have made a backup and then please go to settings > iCloud on your iPhone. Turn off the photo library iCloud, wait a minute or two and then turn it back on. It should be re - synchronize your iPhone with iCloud. Check if the images are still unclear. If they are, please fully sign off iCloud on your iPhone. There are options to save contacts on the iPhone, and other documents and other will be deleted form the unit. Don't worry, this information is recorded with iCloud and also saved in the backup. Once all signed, restart your iPhone. This article will help you if you need the steps to restart the appliance: restart your iPad, iPhone or iPod touch. Once the device powers turn it back on, go ahead and return to the settings > iCloud. Sign in with the same Apple ID that was signed previously. It may take a few minutes to return all documents, data, photos, contacts, and calendars, but once this is done, go ahead and check your photos. They match the icloud.com images? Are they accuse still blurry on your iPhone only? See if you can isolate a specific set of images, or if all the photos on the iPhone are blurred.

  I hope that steps with deactivation and activation of photos in iCloud or logout and back in iCloud has resolved the issue, but if not, please provide the information for the steps that we have achieved together so far and I'll be more than happy to continue checking of other options to get this working as expected with you. Thanks again and have a great rest of your day.

• All my shortcuts on the desktop and start menu - all programs are showing up with blank windows pages icon.

  Original title: broken shortcut

  ALL my shortcuts on the desktop and start menu - all programs are showing up with blank windows pages icon and the name of the file and .lnk I uninstalled something and it happened that I tried system recovery and everything else that I uninstalled the States are back but this how can I solve this?

  Hello

  1. what changes have been made to your computer before the problem?

  Follow these steps and check if they help.

  Step 1:

  I would say you rebuild the icon cache and check if the problem persists.

  a. press the keyboard Windows logo key combination + R to bring up the Run dialog box.
  b. type cmd and press ENTER to open the command prompt window.
  c. in the command prompt window, type the following commands pressing ENTER after each line:
  Taskkill /f /im explorer.exe
  attrib-h "%userprofile%\Local Settings\Application Data\IconCache.db.
  del "%userprofile%\Local Settings\Application Data\IconCache.db.
  Explorer.exe

  d. this restart Windows Explorer and rebuild the cache icons as needed.

  Step 2:

  Test the issue in a new user account.

• I've updated to PS CC 2014 and now my plug-ins are no longer available to use. How to make a comeback?

  I upgraded to CC PS PS CC 2014 and now my plug-ins are no longer available to use. How to make a comeback?  I can navigate is more to the collection of NIK, my plug-ins "Topaz", etc..  They are still available on LR, but they do not now seem to be available on PS CC 2014

  For "Topaz", COP shortcuts of Adobe Photshop CC\plug-ins program in the same folder in Photoshop CC 2014

  I don't know Nik

  BTW what kind of photos does a "photographic Psycho" takes?

• HP PhotoSmart 7510 does not print

  We have installed and had the HP PhotoSmart 7510 up and works fine on our wireless.  Then, we called HP to download an application.  HP technician decided to 'fix' our PC.  While working on this issue, we started to notice that MS applications were disappearing.  They told him to stop and he did.  But he was not able to restore the PC or applications.  We spent 4 hours with Microsoft in order to get things to where they were.  Since then, we did not have the ability to print on the printer.  The printer thinks it connected to our wireless and can make updates or less says that we have the current software.  But our PCs and laptops can not find on the wireless.  I noticed you said someone else to check the IP address of the printer and that he shouldn't be 169.254.  The IP of the printer is 169.254.237.217 and I can't change it.  It is the problem and how do I change the IP address?  The wireless is configured with the channel 11 and WPA and I don't want to monkey with it.

  169.254.237.217 is an IP address not valid. I would try the printer connected to your wireless network. To do this simply use the front panel of your printer and use wireless configuration wizard.

  Let me know if it helps.

• Photosmart 7510 want to print photos off smart phone on photo paper but ends by printing on a4

  Photosmart 7510, I want to print pictures on my smart phone, when I tried always printed on A4 plain paper even if there is no photo paper in the photo paper tray, im obviously something wrong or missed something.

  I understand you are trying to print photos on photo paper. If you use a device the Hp ePrint home and Biz app android and iPhone download Hp ePrint app download. With the application after you have selected the photo, you can go into the settings and select paper size.

  Let me know if it helps.

• HP photosmart 7510 don.t print double-sided automatically auto option not available

  I check the devices, and although my printer has the possibility of two side attached, it says no option 2 faces.

  Hello

  As OEM HP is responsible for the good operation of the printer and their
  drivers provided. Check with HP support, their documentation online and
  drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  E-all-in-one printer - C311a - drivers HP Photosmart 7510<- set="" to="">
  version of Windows.
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=5070121&LC=en&cc=us&DLC=en&lang=en&cc=us

  Photosmart HP printer 7510 e-all-in-one - C311a - support and troubleshooting
  http://h10025.www1.HP.com/ewfrf/wc/product?product=5070121&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HP Photosmart 7510 is not printing

  For the last year I had the probems with my iMac not conencting on my printer. I tried several patches left on other forums to reslove the issue and I am now in the position where I am connected to the printer, but I can't print anything. Details, equipment and history are listed below:

  Equip-

  Apply iMac OS X 10.10 Yosemite.

  Photosmart HP 7510.

  Drivers HP v3.0 for OS X (last Downlaoded and installed 23 Nov 14).

  Plusnet Technicolor TG528n router.

  Details-

  The printer is connected via the printers and Scanners Utility and the HP printer Proxy.

  I can print a test page with success.

  Another thing I print seems to go through the queue correctly but does not print.

  I do not receive other error messages.

  History - I changed the following parameters according to the other forums.

  The router is set on a fixed 6 channel and a fixed frequency of 2.4 Ghz.

  I deleted all printers by resetting the printing system.

  I reinstalled the latest drivers and restarted the computer. (This moment meant the iMac could find the printer - it lacked before that).

  I added the printer HP now found the menu printers and Scanners.

  Everything seems normal but no printing comes out, other than the test page.

  Please can you help and get back to print.

  Thank you.

  Hi @Clisson

  Theoretically speaking, if we had a USB cable connected and determined that the question was the router, I would have recommended call you your router company.

  If we had determined that the problem was related to the computer, I would have proposed as follows;

  Reset the printing system

  1. Click on the Apple icon ( ), then click on System Preferences.

• HP Photosmart 7510 will not print duplex documents

  I just installed my 7510 photosmart printer and it won't print in duplex mode.  The drop to double face two choices:

  print long edge to short edge

  If I choose one of these options, I get a message saying that they are not supported.  I have a mac book pro, which is pretty old and I'm running OS X 10.6.8 previously, I had a printer photosmart/premium (C309) and the dual faced with worked on it.  I am at a loss?

  Can anyone help?  Two-sided printing was one of the features that I really wanted in the printer.  Thank you.

  Hello

  From my experience the alert only invites you for the margins unsupported and not by lack of support for Duplex printing are taken in charge by your printer.

  For duplex printing different margins used, click on continue to confirm the alert automatically changes the format of paper according to and printing should be performed.

  If you stil have a problem printing duplex, go to System Preferences > print & fax.

  Doublt click the printer, and then click the printer setup button.

  Make sure the duplex module is enabled on the driver tab.

  Please let me know of any other matter,

  Shlomi

• Photosmart 7510 - will not print black on any parameter of photo paper (does not print on plain paper setting)?

  HP Potosmart 7510, printing from a memory card.  Using premium photo paper (glossy), set printer to print on HP Premium Plus Photo), printing out with Black/Brown areas in the blue-green instead of black.  Printing using plain paper, set printer on regular paper, just fine.    Same thing happens when I tried Advanced Photo and a Photo paper - print comes out with a blue-greenish cast in areas that should be black/brown.

  Tried to print a black and white photo - identical to all other attempts - if the choice of the photo options paper, the dark areas are blue/green.

  Comment - then try printing from the computer (wireless), produced the same result - black areas are printed in blue-greenish.

  Tried cleaning the cartridges, alignment printer, print quality status report looks very good.

  Door on this forum and general web search.  Nothing has yet solved problem.

  What should I do?  Any ideas/suggestions?

  Yes, this is the case on a 7510.  I worked on the answer.  Although "ink" diagnostice demonstrates both the black and the cartridges 'photo black' as being low, the 'black photo' was apparently empty.  The black of the photo must be called only because when the print properties are defined for the "photo paper", and when it is empty the black dark areas print in blue-green.  I thought that the black photo cartridge was a gray, for most thin shades grey, but maybe it's an intensifier of some sort.  It's a shame that HP does publish no real information.

• : HP Photosmart 7510 does not print port cn25u3501f05px

  Printer does not print.

  Failed to remove 'which is printing' point-tried cancel, delete, interrupt and restart, turn off printer, even the fact of unplugging the printer and repluging it.

  The port is cn25u3501f05px, but I don't know if that means anything.

  Hi @Susie12345

  I moved your posts to keep them together rather than trying to keep track of our conversation on multiple threads. Please use the following steps to remove the software and reinstall it again;

  1. Hold down the Windows Logo key () on the keyboard and the 'R' to open the dialog box run, type %temp%
  2. Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
  3. The new software - uninstall the printer software Instructions
  4. Once the uninstall is complete, reboot the computer
  5. Follow these steps to reset the registry settings and options for Windows Installer.

• My HP Photosmart 7510 c311a leaves a white border on all my print outs (seems to be objective)

  Hello.
  It seems that the printer does not hit the paper or photos when it is printing.
  I remember installing it for the first time, that the test image came out flawless, the second time, it seemed, with a white border on the left side. Print documents with a lot of normal white have not in any way bothered me until now when I print flyers marketing covering all the page and the print is not centered.

  I would like to qappreciate supporting the resolution of this case, beyond the measures. :-)

  Hi Andlett,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  Sorry to hear that you have a problem with printing.  You said you found a white border around the print on.  Have you checked the printer paper size settings, as well as the software you use?  To better help you, can I please have answer you with the operating system you are using as well as the program you are trying to print your photo of?
  Operating system Windows am I running?
  Mac OS X: how to find which Mac OS X Version is on my computer?

  Please answer suits you and I'll be happy to help you.

  Thank you for your time.