Photosmart 7520: msg of error on the cartridges

Similar Questions

• Photosmart 7520 accepting not true 564XL Photo cartridge

  Hi all

  Have a Photosmart 7520 who does not accept the authentic 564XL Photo cartridges. Printer was purchased from Denmark, cartridges purchased in Thailand where printer resides now.

  Get a message (in Danish) that this cartridge is not appropriate for the printer.

  On the packaging of the cartridge, it indicates that the cartridge IS adapted...

  How can I get the printer to use this cartridge?

  Last update of Software/Firmware.

  Printer CZ045B

  Thanks in advance for the help.

  Jorn

  You will need to Contact HP to ask a "regionalization Reset." Do not charge for this, it is covered under the warranty of the cartridge. You will need to have access to your computer and printer then on line with HP. You will also need to have a set of cartridges for the new region, once completed reset cartridges of region of origin no longer works.  Webpage of HP on the subject is here.

• HP Photosmart 7520 fails to connect to the WLAN after deactivation/activation

  Nice day

  I use HP Photosmart 7520 with wireless connection.

  I can print for the first time when the printer connects to the WIFI, but when I turn the printer off and turn it back on, the printer is no longer on the WLAN.

  The screen and print network report says that everything is OK - signal strength is good, he is connected, IP address correct, gateway IP ok, everything is correct and very well - but the printer IS NOT on the WLAN. I have used several analytical tools and I did 'ping' and the prnter is not there.

  There is a big BUG! How can I solve this problem?

  Thank you

  PS: If I want the printer to work again, I have to manually reconnect again to the WLAN

  Since the other topic of forum is very polluted, I paste here the relevant solution

  Left and right of the screen are a House (upper-left), back (lower-left) and a cancellation (bottom right, it's a red X) buttons.  You may need to use a flashlight to see them because probably they are not lit.

  • -Keys in the original sequence (top left), back (lower left), cancel (bottom right), back (lower-left).  This should bring up the menu engineering.
  • In this menu select Menu Underware.  You will see a display similar to the arrows for a TV remote control (up, left, right, down, arrows with an OK button in the middle).
  • Use the arrow key to the right and go into the system menu (the menu names are displayed in the upper left corner).  Press OK
  • Use the arrow key to the left and go to the system mode timeout.  Press OK
  • Use the down arrow key to set the timeout to 0.  Press OK.
  • Exit by pushing cancel (bright red x in the lower right corner) until you have returned to the home screen.

  You can avoid the printer to go into mode 'sleep' and then lose connection. As a consequence will increase energy consumption.

• Photosmart 7520 - printer Terminal error

  I note the following HP problem:

  I have installed a 7520 recenty Photosmart all-in-one printer on my home network. I connect to it via WiFi. It set up fine and generally works well. However, every week or so the screen of the printer is a message;

  Printer error

  There is a problem with the printer.

  Turn the printer off, then on.

  The four buttons off the screen (home, return, aid, cancel) and Wi - Fi blue LED flash all together.

  When I cycle the power, following the instructions, everything is fine until the next time it happens. I've seen the problem 5 - 6 times now.

  The printer had the latest firmware when I've set up a few weeks ago. If I try an update it signals that it is up-to-date.

  Concerning

  Steve

  Hello world

  With the help of Steve310 & Helen we tested this scenario more than two weeks without any problem. Enjoy the time you have spent with me Steve310 & Helen to investigate this matter. Have a wonderful day.

  Disable this feature in the EWS printers and let me know if you continue to have the problem?

  Disable UPnP in EWS printers:

  Follow the steps below to access the Web integrated printer server.

  1 type the printers assigned to IP address in the Internet Explorer address bar.

  2. Network tab

  3 network option on the left

  4. UPnP option on the left

  5 Select the option 'Disable UPnP'

  6. click on 'apply '.

• Photosmart C5380: After having changed all the cartridges printer still does not

  My printer says there is a problem of ink cartridge, ink cartridges seem to be damaged or missing, so I just replaced all. However it did not help that the message still appears. It becomes quite frustrating. What can I do?

  Hey @michcav,

  Thanks for posting in the Forum from HP Support.

  I see that you encounter an alert of ink on your HP Photosmart C5380 all-in-One Printer. I would like to help.

  I found a HP article which may help. Click here and try steps 1 to 4.

  Please let me know the result of your troubleshooting by responding to this post. If I helped you to solve the problem, feel free to give me a virtual h.o.t. by clicking the "Thumbs Up" icon below and by clicking to accept this solution.

  Have a great day!

• Msg of error in the workflow after patched to 11.1.2.1.600

  Hello!
  
  We recently patched to 11.1.2.1.600 for our planning solution and we get an error msg in the workflow.
  
  If the "hierarchy of planning unit" is configured as 'Free form', we get an error message if users open "Manage trusts", select "Details" of a planning unit and then '' change of status. '' The message error is "is there no valid action that can be performed on the selected planning units. If the "hierarchy of planning unit' is defined as 'Bottom up', it works fine.
  
  Everyone know this behavior in the 11.1.2.1.600 - patch? Is there a solution?
  
  An SR is also raised to Oracle, so I hope we get a response from them soon.
  
  Grateful for answers!
  
  ARO
  Martin

  Its a known behavior dans.600. Change the PHU 'Free form' type to 'Bottom-up '.

  See you soon... !!
  Rahul S.

  Published by: Renu on November 27, 2012 15:56

• Photosmart 7520: Preference avancΘs, change the default settings, print using ONLY black ink (not color ink)

  Where can I find this that all information in the preferences > advanced, what they mean, how and why.

  How to permanentely to change the default printer settings.

  How to use out of the black cartridge for everything I print (I do not want to use ANY) color ink.

  Hi TJBar,

  This link should give you the information you need to explain the menu print, print menus. In order to print in black only, you can select "print in black and white." Note, however, that color will be used during maintenance of your printer. This is necessary to prevent the healthy color ink for when you do not need to use it.

  Please let me know if it helps.

  Thank you very much

  Michaele

• HP Photosmarts 7520: printed paper back in the printer before finishing

  Lately the print when I print a document arrives at halfway of the printer, and then it goes back into the printer. The window says 'let dry ink '. The printer has an error message but when I click on the red X on the window, completed copy will come back. No idea why? Just started doing so a week ago.

  The printer will back the paper to print on the back if "Duplexing automatic" is selected.  Check the settings of the driver.  What is the error message?  The troubleshooting steps described here can help solve if there is a paper jam message.

• New HP Photosmart 7520 won't print from the photo tray

  EDIT: He will feed from the phototray if I print the photo in Windows Photo Viewer.  However, he still refuses to print directly from the jpg format, even if I specify explicitly in all the settings I want to print a 4 x 6 from the photo tray.

  Is this a normal behavior?

  I guess it would print correctly from other photo editing and look at software, but haven't checked that yet is not sure.

  PREVIOUS POST:

  I just got this printer and cannot print from the photo tray.  He printed from the phototray during installation and configuration, but it was the only time.  The rest of the time, when I try to print a photo, it selects only in the regular paper tray.

  Is there a magical procedure involved?  I have an operating system of Windows 7 and just installed on the HP site.  I uninstalled and reinstalled, but it still does not work.

  I load a sheet in the phototray, make sure that the correct printer is defined, select the paper size (in this case 4x6in photo sample provided with the printer paper), select HP Everyday Photo Paper, glossy paper, click on print and the printer does not take into account the phototray and prints from the regular paper tray.

  I've scoured the web and answers do not solve the problem.  It's very frustrating.  If I can't get this resolved in a day or two, I will back this printer and will try another brand.

  

  

  These settings should always print to the Photo tray.

• Photosmart 7520 - how to turn off the auto answer fax

  I saw a place during the setup of the fax where I turn the auto answer fax.  Default is ON.  I use the same phone line for voice/fax calls.  So, how can I turn it on and out easily so do not get to the appellants the fax unless I want what they?  Thank you!

  Hello

  To disable the function of Auto years you will need to set up fax

  Press the fax on the Control Panel icon

  Fax Setup > set up the fax base > Auto answer > power

  Hope this helps

• HP games fail msg of error on the game does not

  try to use hp games, whenever I click the icon it says on the work of reading.

  can you help me as iam anovice

  "On the game work?  Surely you must have left something.  Please try again to publish the exact message.

  I have a desktop HP 3 year, that I could use to check if you would give the name of the game you are trying to play.

• Photosmart 7520: Photosmart 7520 and cartridge 564XL

  My documentation of the printer, the output of SureSupply and 564XL box (black) cartridge all indicate that the 564XL black cartridge is compatible with my printer Photosmart 7520.   I took out the cartridge configuration and does not have the XL cartridge.

  Returned to the store, bought a cartridge "564 Black" to discover that it is too big also.  This box also indicates that it will work with my printer.   He said a PHOTO so presumed it would fit in the regular slot for blacks.

  I don't know what to buy.  I suck with two major inappropriate cartridges.   The cartridge door does not seem to adapt for larger cartridges.  What should I do?

  Well, my dumb ass figured it out.

  I had for some reason any thought the photo cartridge door installation had regular black.  My diagnosis on the HP printer also stated that the right cartridge was the photo cartridge.   No wonder!

  Am now printing and just need to buy the replacement of the photo.

  Well, I'm frelieved to know that I am dumb, not crazy

  Thanks for your comments.  I was out to give up.

  Peace to you and happy new year!

• HP Photosmart 7520 will be black printing ink ot

  My photosmart 7520 quit printing black in the middle of a print job.   All cartridges except black needed changed.  I did this and no black printing.  Changed the black cartridge just in case.  No black printing.  I cleaned the connections of the electrode, cleaned the vent system, clean the cartridges twice, unplugged and then replugged it printer.  I need help!

  Solved my problem!

  After more research, from the homepage, I chose 'tools', then clean the print head (due do it twice) and then aligned on the printer and we are ready to go!

• HP C410a Photosmart Premium: bad printing quality on the picture

  Printer HP Photosmart Premium C410a, just replaced all THE cartridges (genuine HP) - he always tells me cyan and magenta are weak, but the test page printed fine and I cleaned the print heads. When I print a picture (of the program Apple Photos) the ink begins to blurr and run. It is a new problem, all worked well.

  Hello and welcome to the community of HP @BevA1,

  I understand that you encounter some problems print quality when you print pictures of your HP Photosmart Premium C410a. I will do my best to help.

  Below, I've posted a link to a document that offers solutions of troubleshooting on this issue. Please try all the steps in order and get back to me with the results.

  Problems with print quality setting for the HP Photosmart Premium Fax all-in-One Printer Series (C410a C410b, C410c, C410d, C410e)

  If this help will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

  I hope this helps and have a nice day.

• Photosmart 7520 amount

  Photosmart 7520; would like to know the maximum number of pages that you are able to send at the same time? Thank you

  HI ralrug, I see you are trying to know how much your printer will be fax simultaneously. Usually the ADF on the top of the printer holds 25 sheets of paper, but in faxing a great document to multiple pages, you can add more pages that 25 battery running out so that you can fax almost all amount to. I wouldn't recommend you do a plu fax of 25 sheets for the simple fact that adding pages might cause a paper jam as possible and cause the fax set to fail. Hope this information helps.

  If you need more help, feel free to write again.

  Thank you.