Photosmart 7520 will not print on color construction paper.

Similar Questions

• HP Photosmart 7520 will not print envelopes

  My all-in-one HP Photosmart 7520 suddenly stopped printing of envelopes. I have already printed their but now they come out just to empty, and I have no idea why?

  Hi ronalds173,

  I would like to help.  You can answer a few questions?

  1. What color ink is supposed to be printed on the envelopes?
  2. Can you make a copy using this color ink?
  3. Can you print other documents using this color from the computer to the printer?
  4. Can you estimate the level of ink in its entirety for each cartridge, by looking at the gauge of printer ink?
  5. Either your connected usb, Ethernet wireless printer?
  6. What is the operating system for your computer?

• HP Photosmart 7520 will not print black.

  Hello... I'm new here.

  I have a 7520 HP which was a gem and has not had a single problem. Today I went to print a document in black and white and printed one side of the page while fading to white on the other side.

  I checked my ink counter and it shows more than 1/2. I tried printing again and he was almost totally faded on one half of the page and the rest was empty. It seems that just ran in the ink cartridge. I went to settings, tools, the Print Quality Report.  Printed perfectly... except that the block that was supposed to be BLACK is white.

  I installed a new ink cartridge... always a blank page. I checked the ink counter and it indicated full. I ran a report of print quality and and everything was fine... except for the BLACK BLOCK... it came out white again. All the letters printed in black on the report and were of excellent quality. I aligned the printer and received a message that says: alignment failed. Cartridges are defined for quality parameters.

  I unplugged the printer, waited a few minutes and plugged back in. Power on and I tried to print again. Same results... blank page. Aligned the printer again... same thing... Alignment failed.

  Someone at - it ideas? My printer is a little over a year old and is not widely used. I changed the black cartridge twice since I bought the new printer and it was always half full according to the meter.

  Thanks in advance.

  EDIT * I put a new Printhead and it works perfectly. I would like to emphasize that this printer was four... that's 4 weeks out of warranty!  I checked the number of pages... 692 pages. I'm a little disappointed on this subject, but I like the printer... so... I sucked it upward.

  Check Solution 6 especially this document:

  http://support.HP.com/us-en/document/c03369392

• DesignJet T770: DesignJet T770 will not print in color

  After you move a DesignJet T770 44 inch queue from a Windows 2003 server to a Server Windows 2012 R2 the T770 will not print in color.

  The general tab on the properties T770 printer States ' color: No. '.  Yet once on the printer properties on the tab color color management is set to "Automatic (recommended)".

  The T770 printer driver has been downloaded from Windows Update I was unable to get a T770 driver from the HP website.

  The T770 product no is CH539A / CN375A. Strangely, none of these product numbers have been recognized by the search for product number for th HP Web site.

  My question is how do the T770 to print color again?

  Any help would be appreciated.

  I would say that you definitely have a driver problem if you has not changed the settings in the built-in web server printer at the time wherever you spent since Windows Server to the other server in Windows.
  
  I check all the settings on each tab in the driver to see if it is possible that somewhere in there color is disabled.
  
  I also go back to HP.com and look for driver for that machine again.
  
  I am also looking for a print utility for this machine, which should not be confused with a printer utility, even if they might be named roughly the same.
  
  I recall there are two utilities is to monitor the status of your printer, and the other is to print and work around the driver.
  
  When you have found the right print utility you save your print format JPEG or PDF file and then open it in the print utility and send it to the printer without ever open drivers.
  
  Another experiment, you can try it if you have a practical PDF just open a web browser and access the built-in web server printer and then try to print the PDF file directly by using the option for printing on the web server.
  
  The purpose of some of these things is number one determine if the printer has developed a problem that it prevents printing color and print JPEG or PDF from the built-in Web server where all you do is send the file directly to the printer would let you know that the printer is always able to color.
  
  So if you can get the print work utility where you can open the PDF on a PC and then send it to the printer you have to least a workaround while you solve the driver problem.
  
  If my post solves your problem, please click on the accepted solution button under the post. Thank a technician for their efforts in the creation of these posts please to give them a little nudge upwards, just click this icon under the post and give them a few congratulations.

• HP Color Laserjet 2550n will not print in color?

  My HP Color Laserjet 2550n will not print in color?

  I spent half a day Googling this issue and could not find any solution?

  When I press the go and cancel the 3 test pages print fine in color set button.

  But if I try to print anything from my laptop, it's all B & W.

  I already installed the latest version of PCL5, PCL6 and PS drivers from today:

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=388401&lang=en&lang=en&cc=us&cc=us

  None of them print in color?

  I think that is the question:

  http://i.imgur.com/WM8Oy92.PNG

  But, how to fix this?

  My OS is Win 8.1Pro x 64 with all updates installed.

  The colour toners are 100%, black is at 28%.

  rk_russelking: your suggestions have been COMPLETELY & TOTALLY USELESS.

  I found the answer here:

  ... «in the printer properties, select the tab settings of the device, scroll to the very last item at the bottom, which is 'Device Type'.» The value displayed (which of course got auto-installé as a default value, for both PCL6 drivers), is "AUTO-DETECT". You would think that would work, but it apparently does not.

  In any case, by selecting the drop-down arrow, it turns out that there are three available values: AUTO-DETECT, COLOR and MONOCHROME.

  Of course she then had me select COLOR, click APPLY and then click OK. I repeated the process for the other printer PCL6. »

  

  http://i.imgur.com/dxultKG.jpg

• Photosmart 6525: will not print in black

  My photosmart 6525 will not print in black ink.  Clean the printheads 6 times. Cartridge replaced twice. Any suggestions?

  Hello

  Welcome to the Forums of HP Support! I see that you are having problems printing in black. I want to help you solve this problem. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  Try the following steps to see if it will solve the problem, HP Deskjet 6520, printers HP Photosmart 6520 - printer prints a blank Page or doesn't print in Blac...

  Here is a document to manually clean the contacts of the cartridge, "not compatible ink cartridge" or "specified ink cartridge needs to be replaced" views for HP Deskjet i...

  Do not take into account the title.

  Here is a document for the reset of the printer. Ignore the title, HP printers - solve the 'problem with printhead,' "The printer failed," 'Ink system failure', or ' 0 x. / c0 > »

  Please let me know the result and if there is anything else I can help you. Thank you.

  

• New Photosmart 5520 will not print in black

  I have a new HP Photosmart 5520 printer all-in-one.  Black ink ran out so I replaced it with a previously used ink cartridge which is of the same type # 564 but a XL version.  This cartridge has been barely used.  Now, I just can't get anything to print in black.  It will print in color, but not black.  I tried to turn off the printer.  I put the cartridge in my printer and it worked fine.  What should I do?

  edgarlogcabin wrote:
  

  my printer hp 5520 will not print black

  The in the here document troubleshooting steps may help resolve problems with black not not printing on your Photosmart 5520.  Especially make sure to check the events as on the Six Solution.

• Photosmart 5520: Will not print in black ink

  I did an interview on the print head, but it will not print in black. All other colors are fine and the ink is full so please tell us what can I do?

  Hey @Hughes23,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with printing in black of your Apple devices to your 5520 Photosmart e-all-in-one printer. I can help you with that.

  This document describes How to solve print quality problems with your printer. If you access all the steps to ask you to replace the cartridge or the printer service, instead contact the HP support directly. You can do this by clicking on this link and fill out the form below to discuss the options based on your warranty.

  If this allows you to print, please let me know by clicking on accept Solution below my post. Also, I would like to know if you have any other questions. If not, have a great week!

• PHOTOSMART 5520 WILL NOT PRINT BLACK

  I just replaced the cartridges for my PHOTOSMART 5520.

  After that, color printing has no black color.

  All HP cartridges are not new.

  It's very frustrating.

  for some unknown reason, this problem is gone when I tried printing 2 weeks later.

  To summarize:

  I'm in the United States.

  I replaced the 4 cartridges again purchased at HP online.

  After that, the black will not print if I choose to print in color.

  But if I print in "black and white only", black is in fact works very well.

  I tried everything suggested in the web forum such as cleaning, alignment, prower AC cycle,... etc. He has not fixed the problem.

  I stop using the printer for 2 weeks. But yesterday, I try agin, then the problem is gone.

  I don't know what to say. Thanks to HP for assistance.

  Overall, the servie is nice - just called him several times.

• HP photosmart 5515 will not print black.

  HP photosmart 5515 do print not black, but is printed colors (cyan blue yellow). Printer shows full inks on all colors.

  There is a document with steps to help resolve a print quality problem where black ink will not print Photosmart 5515. This document can be found here.

  I hope this helps.

• OfficeJet 6500 has more - black print cartridge will not print - other colors will be printed

  OfficeJet 6500 has more the black cartridge will not print.  I put in a new cartridge, so it is there

  ink.  The printer works, because the other colors of printing.  It worked very well and when

  printing, black has slowed and now does not work.

  I called technical support.  Megan has been very helpful to me through the steps to

  clean the print head.  Unfortunately, the black cartridge still does not print.  I have

  has ordered a new printer, the 6700.  I appreciate the help of Megan and will be happy to

  have a new printer.

• HP Photosmart 5520 will not print photos

  I've had this machine for a few months and just discovered that, unlike my previous HP printer, it will not print photos from my PC. Unlike my previous printer, it doesn't have a slot for a memory card. When I click on "Print" for a picture of the appropriate screen appears on the screen but nothing else happens. Can I do to remedy to this problem please? The printer prints documents with no problems. I use Windows 7 right now

  Hi, what program you use to print photos?

  Have you tried another program?

• Color Laserjet CP1518 will not print in color

  XP SP3 usb connected.

  I found other troubleshooting solutions. Namely, that where the solution is to uncheck "print in grayscale".  I don't see this option on one of the property tabs.

  The 1518 has been in service for months, maybe more than a year.  Had some problems with it not behave like a printer and would remove and reinstall through control-> printers/Fax Panel.

  Tried again with this instance, nothing helps.   Color toner supplies are all over 80% - and print supply page in the menu of the printer _does_ color print.  Fact page of toners 'Colorsphere.

  Any jobs sent to the printer, with elements of color, prints in grayscale.  The printer is shared through the connected usb XP machine.  network printing also does not print in color

  A search of this forum did not turn anything for this situation.  If anyone can provide a link to the query (solved) of another user or perhaps an explanation for changing the appropriate printer property to start printing in color once again I certainly appreciate it.

  Thank you.

  A solution of sorts.  I'll post here so when it happens again in a year and my addled brain can't remember, maybe that I'll find myself here.

  At HP, I downloaded the printer driver.  These are apparently "universal."  Deleted the XP printer and it - he added point to the level of the 8-12 different folder with .inf files that I had just downloaded.  No idea which one to use.  And apparently not so universal that HP would have you believe.  I presume that one I chose (proabably the first alphabetically) only allows gray - or is gray universal for printers.

  Well, rather than waiting on the long tail of wisdom on this forum I tried a reset hot of the printer (pull the plug while its on and wait 15 seconds).

  did.  tried to print (in excel the view print used to always display in color and he wasn't yet). There not also to print in color.  However in the meantime that the print job, I noticed that my "equipment was ready for use.

  Checked the printer and found a new listed HP cp1518ni.  has chosen to print in excel and the preview showed in color and voila! print color too.

  I've never cared for lack of HP of discrimination re: printer drivers 'universal '.  At least, they should give more guidance on which .inf to use _if_, you're going to be looking forward and install it yourself.

  However, I am impressed XP and HP got the correct auto-install.

• Re: HP Photosmart 5510 - will not print using black ink

  I received a WARNING ink level so I went out and bought new cartridges. When I put the new in, black will not print.

  I followed all the instructions on my printer, all the instructions of the hp print & Scan Doctor and went out to buy a new black cartridge in the second.

  tracking of document Hp: http://support.hp.com/us-en/document/c03425035

  Still no black printing.

  I cleaned the print heads.

  So I have three cartridges of "True HP", two of them nine and no black print.

  Are there any other instructions that can be followed to fix my printer? It is more under warranty and there is no way I'm paying for a repair on a printer who leave work when installing a new cartridge.

  @lcaughey

  I'll me private message you on this (check in the envelope at the top right)

• Printer HP Photosmart B109am - will not print a worksheet.

  I just installed this printer on my desk.  The problem I have is that it will not print a worksheet that I made previously, it allows to print word documents.  I have Windows XP on my computer.  When I try to print the worksheet, an error appears on my computer saying: "Microsoft Works, out of Memory."

  Can anyone suggest what could be the problem?

  Hello.    Since my last post, I was able to fix my problem.   Before when I tried to print landscape I just went into my layout, orientation and clicked on the landscape.   But with this new printer, I also change the margins so and it seems to work.   I don't know why this happens with a spreadsheet, as I've not had to do with a word document.

  Thanks again for your help.