Photosmart All - In - One 2570: printer

Software different Printerhead say tell the printer

Discovered it was the cartridge that has been difected. had a few noew ones and it works. Thank you

Tags: HP Printers

Similar Questions

  • Failed to get printer hp psc 2410 photosmart all-in-one to print in color

    I have a hp PSC 2410 photosmart all-in-one printer. I use it on a system windows xp, 32 bit.

    I went to make a copy in color on the printer and it gave an error on the black cartridge by saying that she does not recognize.  Had not changed or replaced the cartridges they were half full.  I tried to go out and reinsert the cartridge, but it did not work.

    I replaced it with a new one.  Error disappeared, but it now only prints in black and prints any color at all.

    Replaced the (full) cartridges with new ones, aligned and clean the printer started it twice, without change.

    Close the pritnter and computer, did it again, same results.

    Uninstalled and installed printer and software, same result.

    What could have happened?  Behaves as if it doesn't have a color cartridge.

    Here is a document for your printer who carry on Matt, missing or faded colours. This document starts and you then click on other links to documents based on your results from the troubleshooting performed. Stay with him and he will lead you to how to clean contacts and how to read the diagnostic report, once it prints.  I think that some steps are buried, so here a link to assess the self-test. Finally, here's a direct link to fix bad test models in the self-test report. I hope this helps. http://support.HP.com/us-en/document/c00048685

  • Photosmart all-in-one D110a: printer

    I installed a new ink cartridge, but the printer will not print the alignment page.  Now the screen says 'print alignment page.'  There is a big red X and the power button flashes.   I turned off, checked the cartridge, disconnected the power and have reinstalled the printer, but none of these things have solved the problem.  I can print a page from the computer, but can not copy or scan.

    Hey @SandyTP1,

    Welcome to the Forums of HP Support!

    I see that printer e-all-in-one D110a Photosmart will not print an alignment page or align. I can help you with that.

    To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once completed, this document describes How to solve problems of alignment with your printer.

    If after the above, that you are unable to align, the printer must be replaced. You can contact the HP Support by clicking here and filling out the form below to see what options are available.

    Please let me know the results after following the above. If you can align or reach a resolution with the support, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  • Wirth problem Scanner printer HP Photosmart all-in-one.

    How can I activate the scanner on my HP photosmart all-in - one printer?

    How can I activate the scanner on my Photosmart all-in-one printer?

  • HP PSC 2410 Photosmart all-in-one printer SLOW printing

    All of a sudden my HP PSC 2410 Photosmart all-in-one printer has started printing very, very, very slowly. If at all. It took almost 30 minutes (1/2 hour) to print only 1 page word document. I am on Windows 7 OS.

    Dialogue problems says everything is fine. An attempt to print a test page was even worse. He printed only the top 1/4 of the race and that it was illegible.

    I ran CrapCleaner, Norton full scan and I was able to print for about a day before the problem returns.

    Help!

    Hey Rainbow7000,

    I also had problems with copy. I noticed that the missing parts were color text or photos. There was no indication that the Tricolor cartridge was low or empty, but I replaced it in any case and VOILA... print is returned to normal and fine everyting.

    I would have thought there would be some am indicator when the cartridge is low, but it was not.

    Thanks anyway.

    RenardB

  • Photosmart B010a All In One test print O: K: does not the computer print

    EGR: GIS. No error message in the control panel is READY, printed the test. Don't print your computer. 6220 with windows 7/64 bit HP computer. = network WI Fi of tiscali. the printer is connected with a cable to the computer. I also tried with the doctor. Please help me understand where I went wrong; I installed the last type of software and drivers available. Thank you, cordially Costanzo

    Photosmart All In One B010a stampa di prova 02: computer dal non stampa

    EGR: GIS. Message error nel pannello di controllo pulito PRONTA di Nessun, ha the prova stampato. Stampa NON to dal computer. HP computer a window 6220 con 7 64-bit. Rete is tiscali WI Fi. stampante e collegata con computer of al it cavo. Ho tried anche con doctor. Per favore save a just dove ho sbagliato. Ho da the Ultimo tipo di software e driver available. Grazie, Web Saluti Costanzo

    try to connect the printer to your laptop with USB connection.

  • Not able to find driver Win 7 (64 bit) for printer "hp psc 2410 photosmart all-in-one. pls help

    While I insert the printer USB cable to the laptop, it runs the Windows Live Update automatically and fails in the final task, the installation of the driver. It says "hp psc 2400 series - has failed.

    Then I removed the USB cable, removed the device of "devices and printers", reboot the laptop and then tried to load the driver manually. But in the window "install print driver", I could not able to find the driver for my printer ' hp psc 2410 photosmart all-in-one ' for the operating system of Windows 7 Professional (64 bit) under the "HP" manufactured.

    Can someone help me get this printer driver to use the Win 7 (64-bit) operating system? Thank you.

    Thank you, Sean. It has not solved the problem. Instead, I got to know that this will work with the 'HP Deskjet 6980 series' pilot and his summer work after I chose that one through the configuration of the local printer.

  • Photosmart all-in-one HP C4480: printer will not print. Incompatible ink cartridges

    My printer has suddenly stopped working, of course, comes "incompatible cartridge". For the next two weeks, I tried everything I know and everything that I could find (even the Forum Support HP's. I received a response from you, but it was a response to a problem that I didn't ask) now I'm in the never never land. This is the third set of cartridges that I have tried. They are all HP cartridges.  My computer is s3700f Slim line, my printer HP Photosmart all-in-one, C4480.     Thank you for any information you can help me on this aggravating problem.         Meiko

    Hello Meiko,

    Welcome to the HP Forums.

    I see that you have a problem with incompatible ink cartridges.

    Please click on the link following which treats a 'cartridge problem', "Incompatible cartridge" or "Cartridge missing or corrupted" Message is displayed on the computer or the printer control panel.

    If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 for all other regions: click here.

    Thanks for your time.

  • How can I print to hp photosmart all-in-one ipad 7280

    How can I print to hp photosmart all-in-one ipad 7280

    Hello

    But the C7280 is not active AirPrint, you can still print via the local network using HP ePrint mobile app.

    You can find the steps to get and use the application in the following document:

    http://support.HP.com/us-en/document/c02775166

  • 6520 photosmart all-in-one: can't get Photosmart 6520 to print in black and white only reliable

    I'm trying to get the 6520 Photosmart of HP all-in-one to print only in black and white. I followed the instructions in the manual (go to the preferences of the printer by selecting "Black ink" only 'Print in grayscale,' hit 'Apply' and 'Send'.)

    Now, if I do a table in the word processor Open Office and fill the cells with different colors, they print in black and white. Bonus. This is what I want. However ... When I print a page of Open Office spreadsheet (the ultimate goal), there are all the cells, printed in color of life.

    That is what it is? How can I fix?

    Afternoon @MSWS,.

    I can help you with the printing settings in Open Office.

    It seems that this program has its own options that can bypass the default print settings.

    I found this page of support which may help you with the settings. OpenOffice - control print  

    Thank you

  • Printer error 0x610000f6 General on Photosmart all-in-one C309n

    Whenever I print, I get a general printer error on my HP Photosmart all-in-One Touch Smart C309n; the error number is the same every time: 0x610000f6.  I have to press OK on the screen of the printer to empty before printing again.  Sometimes it will show all the work until the error comes up, but other times it will bring up the error after the first page, and I have to turn it off to get the rest of the print job done.  Help, please!  Thank you!

    The code you get is normally caused by an ink system failure, but those who won't let you push OK to get in front of them. Your printhead may be out. The print head would be out of warranty now, as is the printer, so the only thing you can do is to try to clean the print head. The document following the link will take you through the steps of cleaning and aligning the print head. The place in the document that tells you the following steps are labeled step 4 and step 5 under Six Solution in the document. If the message continues to rise, you may need to physically clean the print head. The steps to do this are in a post from Bob_Headrick. She is tied below the document mentioned above.

    Print quality:
    http://goo.GL/dZvCV

    Bob_Headricks steps to physically clean the printhead:
    http://goo.GL/DfroJ

  • How to enable print double-sided on 6520 photosmart all-in-one

    How to enable duplex printing on 6520 photosmart all in one running on windows 7

    The Photosmart 6520 support automatic duplex printing.

    You can follow the penlow stes to set duplex printing:

    http://support.HP.com/us-en/document/c03476083

    Shlomi

  • HP Photosmart all-in-One Printer series - B010 with Mountain Lion (10.8.1) / Wireless printing

    I tried to find manuals how to connect my HP Photosmart all-in-One Printer series - B010 to the network in order to get wireless printing, I followed a few articles, but it seems that my problam is that I can't find a way to connect the printer to the wireless network and find wirleslly on the mac. I'm getting hard to do... someone knows how to get there? Thank you very much!

    HP Photosmart all-in-One Printer series - B010

    MacBook Pro / 10.8.1 (Mountain Lion)

    Router

    Hi yadin7,

    The Photosmart B010 model only offer USB connectivity and does not provide any wired or wireless network connectivity.

    You can find the specifications listed below:

    Input/output
    USB port: Rear hi-speed
    

    http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=120&prodSeriesId=4058814&prodTypeId=18972&ObjectID=c02120016

    Kind regards

    Shlomi

  • HP Photosmart all in one printer C7280 Windows Vista 32 bit.

    My HP Photosmart all in one printer keeps going to put in place for the printable school pictures.

    I unplugged and it always goes to the same thing when I turn it back on. How can I fix it

    This problem?

    Thank you

    ducksterman.

    Hi again,

    If it doesn't appear on your printer and not on your PC, right?  My bad... I'm in the driver settings.  Try holding down the symbol # and 3 at the same time on your printer.  This should reset the printer.  If this does not work then press the symbol # and 6 at the same time.

    Or

    To restore the default settings

    1.

    Press Setup.

    2.

    Press to select Tools, and then press OK.

    3.

    Press to select Restore Factory Defaults, then press OK.

    The default settings are restored.

    Let me know if that helps...

  • Photosmart all-in-One b210a: Black is not printing

    Hello world
    I have a problem with my printer, a Photosmart all-in-One b210a, connected wireless to my network. The problem occurs when printing: it seems that the printer doesn't print anything that uses the color black or black color itself.
    I tried to clean the print head and it only prints the other colors (one line). I tried also to change the ink cartridge, but nothing to do; I tried to align the cartridges aaaand it is said that the alignment is not (it only printed the blue lines) and everything in the Tools menu, but not reset the configuration.

    I also tried to print 10 Windows and OS X (a color and a black and white document). The same result at a time when black and white document printing: not black.

    Any ideas? Thank you.

    Alexander.

    Hi @AlexandrCerutti,

    Welcome to the Forums of HP Support!

    I understand you are having print quality problems on your HP Photosmart Wireless e-All-in-one printer - B210a

    Printer. I would be glad to help and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

    Looks like you did most of the resolution of the problems already. The print head is probably clogged or will need to be replaced.

    NOTE: I would be cleaning several times to try to resolve the problem with the print head.

    Please confirm that you have tried the steps in this guide: HP Photosmart Plus B210 printer - color or black ink printing not.

    If the problem persists, the print head should be cleaned.

    Check the status of print head warranty:
    If you have a faulty cartridge or print head, it might be under warranty. To check the warranty on your ink supplies, go to tohp.com/go/learnaboutsupplies, select your country/region, and then review the information of limited warranty for your supplies.

    Printhead replacement games are available from HP customer or authorized service providers assistance.
    ATTENTION: Wait until you have a new available print head Assembly before you remove the ink cartridges. Do not leave the ink cartridges out of the printer longer than 30 minutes. Can result in damage to the printer and ink cartridges.

    If the printer is out of warranty, you can try the procedure in the video below. Please use at your own discretion.

    Video: Manually clean the print head on the HP Officejet 6500 printer

Maybe you are looking for

  • Cannot use my Satellite L350 with ODD caddy

    Hello! I have 6 years of cca laptop Toshiba Satellite L350. Now, I decided to get SSD for the OS HARD drive instead. So I bought MX100 Crucial SSD 128 GB and place it where was the HARD drive. For the HARD disk, I bought DVD SilverStone Treasure TS09

  • Double layer burning fails every time - Tecra A9

    Hi all. My Tecra A9 is equipped with Teac DVW28ECT (Rev7.5A) I have no problem burning on a DVD single layer... but EVERY time I try to burn to a double layer process stops about 25% in the burning process. I can't find more recent updates of the dri

  • regular expression

    According to the link below, TS supports regular expressions.  Can anyone provide an example where to write regular expressions? I might be easier to do via a plug-in of .net, but TS permitting, I might go with it. http://zone.NI.com/reference/en-XX/

  • Lenovo U410 - cannot access BIOS

    After I pressed Fn + F2, the message in the lower left corner changed "press fn + f2... "to"pending ". But then, it accesses the windows system. I also tried with F2 without success. FN + F12 does not even change the message to the start screen. I su

  • in windows 7 ms word ppt and can open and close on their own. Excel and outlook work very well.

    I installed windows 7 Home Premium and it works well.  When I try to open Word or ppt, they open and then I get a message: "MS Word (or Powerpoint) has stopped working.  We will close the program", and then it closes.   Run problem diagnostics does n