Photosmart all-in-one 7525: last scan software necessary for iMac running ElCapitan

Similar Questions

• photosmart all-in-one problems 5200 impression with the new Dell running windows 8.1

  have a photosmart C5280 All-in-one I used with a computer that is running windows XP, it worked fine. Bought a new computer running windows 8.1, printer don't print very well at all. It prints the page after page, one or two lines of hyroglifics tile view deleted I canceled the print document to stop using paper. I uninstalled the printer software and reinstalled from website of HP software to run with windows 8.1 still does not work.

  I think it made me print again. I had to uninstall the full features software and loaded the driver only. I could not full features software to load completely, then I loaded the driver only and it seems to work okay thanks for the help.

• HP all-in - One L7650 'printer off-line' to my iMac running OS Lion

  MSG for error "printer not connected" but direct USB port, printer has been restarted, same as iMac

  ohgeorge wrote: msg of error "printer not connected" but direct USB port, printer has restarted, same iMac

  Hello ohgeorge, you will need the latest features complete software package for your printer.

  Here is the link for the software of full functionality for Mac OS X 10.6

  This version is supposed to work perfectly with Mac OS X Lion, as indicated by HP.

  There is also some information on how to install the printer in Mac OS X Lion, which can be found here .

• 6520 photoSmart all-in-one: problems of scanning HP6520

  I had issues when I was with Win7-64 bit, but now its even worse since the installation of Win10-64 bit.  I have to open the Setup Wizard to go through the routine of checking on the printer to test the scan to get the scanner to work.  Works very well this way, but such a long way around to just scan of a photo.  Is there something I can do to fix this?

  Have no problem with the impression that he is still printing the 1st page to last although I programmed it to print last page 1 on the 1st last page.  Minor problem. that I can live.

  Welcome to the community of HP @Snooze2978,

  I saw your post on the scanning problems you encounter on Windows 10, and I hope to help you! Let me know a little more on the questions by answering and completing the steps below and then answer for me with the information and we can go from there!

  • • How the printer is connected (USB / wireless / wired / Bluetooth)?
    • You can successfully make copies of the front of the unit?
    • Have you tried the front of the printer and the scanner software?
    • Do you receive error messages when you try to scan and if so, what they say?
    • Have you tried uninstalling and reinstalling the software?
    • What firewalls and antivirus software are installed?
    • Have you tried to disable or uninstall the?
    • You have the device connected directly to a wall outlet (avoiding electrical surge bars, etc.)?

  Also I would like to know how you install the software, disks, download them, or running it HP printer install wizard for Windows.

  Thank you!

• HP Photosmart C6180 all-in-one: cannot install the software drivers for HP c6180 all in one

  Hello
  I almost thought he drivers directly from the HP site but not this errors.
  
  Also when I try to detect the HP printer, it does not find and my machine is wireless.
  
  When I try and add a PRINTER via the Control Panel, it does not show the printer in the list?
  
  Strange?
  I think I'll plug the laptop directly and see what happens? But what can I get lead to?

  Everything that fact.
  Kept the drivers installed and it worked, did the wireless connectivity, and all is well.
  
  Thank you

• Photosmart all-in-one 5524: 5524 printing software can be installed in windows 10

  Hp for 5524 software can be installed in windows 10

  Hi, thank you very much for your comments, it seems to work now that I realised your suggestions.

• How to get windows 7 to scan from my HP Photosmart All In One? He's used to, now it will be not - says not detected to scan. Please help in simple language.

  My HP Photosmart all the one used for direct scanning to my computer which has Windows 7. He went offline and now works fine. But now Windows Fax Scan & custom ' work. My computer guard says that a scanner is not detected. Please help I'm not very good at this stuff! Thank you!!!

  Review HP support site, or use diagnoses of HP, a shortcut to that would probably be on your desktop (if you installed according to the instructions from HP, their cd and does not just plug the printer)

  http://WWW8.HP.com/UK/en/support-drivers.html

• Photosmart all-in - One 7520: new driver for Mac El Capitan in a 7520

  I installed my OS from Mac to El Capitan (10,11) 2 days.

  Have the camera HP Photosmart all-in-One 7520.  The printer driver will only up to Mountain Lion (10.6).  The printer works, but the scanner does not work.

  I had Geek Squad go through everything on computer, looking for latest info on your site, etc.  Conclusion: Need new driver for the scanner compatible with El Capitan.

  Is a new driver in preparation?  I would like to know as soon as it is available, because I scan a lot of information every week.

  Thank you.

  Hi @DStrick,

  Glad to see that you are using the HP forums, this is a great question other customers might wonder about too! I can help you get the required software for your 7520 for use with El Capitan! Once solve us the problem, please state the position which I accept as a Solution to help others find the answer to your question!

  This download package contains the complete software solution for Mac OS X El Capitan including all drivers and software needed: file name: HP-inkjet ink-SW-OSX - Mavericks_v12.34.44.dmg

  This software has been updated 1 October 2015 and can be found here: software and driver downloads for the Photosmart 7520

  Please let me know if this actually solves the problem, or if you need assistance. Thank you.

• HP PSC 2410 Photosmart all-in-one compatibility issue with Windows 7

  My HP PSC 2410 Photosmart all-in-one does not work in Windows 7.  Said that there is a compatibility issue.  Can someone please?  Thank you!

  HI JourneysLady,

  I understand and would like to mention that as I said in pilots are a basis of drivers and they have the ability to print and you can scan through Microsoft Paint or scanner and camera, but would not be able to scan using any software complete features and driver software is required for this but unfortunately the full feature software and drivers is not available for the device that you use.

  --------------------------------------------------------------------------------------------------------------------------

  Please click on "CONGRATULATIONS" If the problem is resolved and you want to say thank YOU.

  ----------------------------------------------------------------------------------------------------------------------------------------------------------

  Although I am an employee of HP, I speak for me.

  ---------------------------------------------------------------------------------------------------------------------------

• My HP LaserJet 3055 All In One does not scan with Windows 7-64 bit.

  My HP LaserJet 3055 All In One does not scan with Windows 7-64 bit. I can copy and print only. Thank you.

  Hello

  Is the printer connected to your PC by USB or network?

  Using the USB connection, you can scan using Windows Fax and Scan software built into your operating system.

  Scanning over a network connection unfortunately supported on Windows7 32 bit only, as you can find listed in the section about network scanning below:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?&objectID=c02539136#A2

  Kind regards

  Shlomi

• HP PSC 2410 Photosmart all-in-one printer SLOW printing

  All of a sudden my HP PSC 2410 Photosmart all-in-one printer has started printing very, very, very slowly. If at all. It took almost 30 minutes (1/2 hour) to print only 1 page word document. I am on Windows 7 OS.

  Dialogue problems says everything is fine. An attempt to print a test page was even worse. He printed only the top 1/4 of the race and that it was illegible.

  I ran CrapCleaner, Norton full scan and I was able to print for about a day before the problem returns.

  Help!

  Hey Rainbow7000,

  I also had problems with copy. I noticed that the missing parts were color text or photos. There was no indication that the Tricolor cartridge was low or empty, but I replaced it in any case and VOILA... print is returned to normal and fine everyting.

  I would have thought there would be some am indicator when the cartridge is low, but it was not.

  Thanks anyway.

  RenardB

• Help me buy a new all-in-one which will scan to pdf with preview multipage

  I need a new all-in-one, like the OfficeJet HP 6700 Premium e-all-in-one printer, which I watched in a store.  The box was not clear about the capabilities.

  What I do with old HP all-in-one on an old XP, (11-12 years) old machine is scanning documents to preview multipage PDF, so I can adjust the margins and other things, and if I did not have many PDF files for a multi-page document.  I do this a LOT, I need, it is not a such PITB.    I have not found a way to do this with the printers I have, my new computer so I have to go do it on a slow XP machine in another room.  I can only print at the old printer to my new computer.

  I'm used to using the HP, but those I have is old, my old XP machine (6 years) so it is more reliable and my new computer Windows 7 Professional 64 - bit, and Windows 7 drivers for my old all-in-one are not full function, if they still exist, plus we have several computers and tablets on our network now.   None of the older all-in-one I will do what I need for my new computer, if they'll even install (you look, Dell).

  What I need to know, it's done with Windows 7 on HP OfficeJet 6700 Premium e-all-in-one printer?  (Scan multipage PDF with the HP software preview.) The info on the box was not clear.  If not, is there a model preferably wireless all-in-one that will work for me?  I can plug it into a USB port on my new computer, there are several USB 2.0 and 3.0 ports.  I would like to be able to print wireless from other devices, but this isn't a deal breaker.  I don't want to have to download a few fragmentary shareware or buy a high price to accomplish what I was able to do with the software before HP, on old all-in-one.

  That's what I needed.  Why hell isn't in the ^ & *) & ^ % manual?

  http://support.HP.com/us-en/document/c03584750

• I need an installation CD replacement for Photosmart all-in-one C4580

  I lost the CD for my HP Photosmart all in one single C4580 and need to reinstall the printer to an old high-end desktop pc (2006)

  Any advice?

  Thank you...

  You are the very welcome.

  Why not download the software on another PC and burn it to a CD and then use the CD you burned to install the software?

  Or you can copy the file to a USB flash drive and install it on the PC using the USB key if the PC has a USB port.

• Failed to get printer hp psc 2410 photosmart all-in-one to print in color

  I have a hp PSC 2410 photosmart all-in-one printer. I use it on a system windows xp, 32 bit.

  I went to make a copy in color on the printer and it gave an error on the black cartridge by saying that she does not recognize.  Had not changed or replaced the cartridges they were half full.  I tried to go out and reinsert the cartridge, but it did not work.

  I replaced it with a new one.  Error disappeared, but it now only prints in black and prints any color at all.

  Replaced the (full) cartridges with new ones, aligned and clean the printer started it twice, without change.

  Close the pritnter and computer, did it again, same results.

  Uninstalled and installed printer and software, same result.

  What could have happened?  Behaves as if it doesn't have a color cartridge.

  Here is a document for your printer who carry on Matt, missing or faded colours. This document starts and you then click on other links to documents based on your results from the troubleshooting performed. Stay with him and he will lead you to how to clean contacts and how to read the diagnostic report, once it prints.  I think that some steps are buried, so here a link to assess the self-test. Finally, here's a direct link to fix bad test models in the self-test report. I hope this helps. http://support.HP.com/us-en/document/c00048685

• HP photosmart all-in-one C2780: installation problem

  I have a printer HP photosmart all-in-one C2780

  You download the software and drivers for this printer on HP site

  When I start the installation of the software from starting the program after that extraction does not work and a message appears saying:

  Microsoft Visual C++ Runtime Library

  Runtime error

  Program C\users\FALVES\Appdata\Local\Temp\7zS1B01\Setup.exe

  This application has requested the execution to terminate in an unusual way.

  For more information, contact the application support tema.

  I ask?

  How can I contact the Support team

  What's wrong

  How can I solve this problem

  Ok

  Knowing that you use antivirus software can help to understand it better, it will be great if you can clarify that.

  So, try the following steps in the meantime:

  1. Click on the Start menu and type %temp%
  2. Open the listed temp folder, and then open the HP folder that begins with 7z.
  3. Open the UTIL folder.
  4. Open the folder of the CCC.
  5. Double-click on the file Uninstall_L4.bat

  A prompt should appear and several unisntallers should run, if only a black window appears, click enter once.

  Follow the steps of screen on until the uninstall ask to reboot the PC.

  Reboot it and try to reinstall the software.

  If it persists, remember to specify accordingly.

  Shlomi