Photosmart all-in-one printer: loss of the network printer connection

Similar Questions

• HP PSC 2410 Photosmart all-in-one printer SLOW printing

  All of a sudden my HP PSC 2410 Photosmart all-in-one printer has started printing very, very, very slowly. If at all. It took almost 30 minutes (1/2 hour) to print only 1 page word document. I am on Windows 7 OS.

  Dialogue problems says everything is fine. An attempt to print a test page was even worse. He printed only the top 1/4 of the race and that it was illegible.

  I ran CrapCleaner, Norton full scan and I was able to print for about a day before the problem returns.

  Help!

  Hey Rainbow7000,

  I also had problems with copy. I noticed that the missing parts were color text or photos. There was no indication that the Tricolor cartridge was low or empty, but I replaced it in any case and VOILA... print is returned to normal and fine everyting.

  I would have thought there would be some am indicator when the cartridge is low, but it was not.

  Thanks anyway.

  RenardB

• HP Photosmart all-in-One Printer series - B010 with Mountain Lion (10.8.1) / Wireless printing

  I tried to find manuals how to connect my HP Photosmart all-in-One Printer series - B010 to the network in order to get wireless printing, I followed a few articles, but it seems that my problam is that I can't find a way to connect the printer to the wireless network and find wirleslly on the mac. I'm getting hard to do... someone knows how to get there? Thank you very much!

  HP Photosmart all-in-One Printer series - B010

  MacBook Pro / 10.8.1 (Mountain Lion)

  Router

  Hi yadin7,

  The Photosmart B010 model only offer USB connectivity and does not provide any wired or wireless network connectivity.

  You can find the specifications listed below:

  Input/output
  USB port: Rear hi-speed
  

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=120&prodSeriesId=4058814&prodTypeId=18972&ObjectID=c02120016

  Kind regards

  Shlomi

• HP Photosmart all in one printer C7280 Windows Vista 32 bit.

  My HP Photosmart all in one printer keeps going to put in place for the printable school pictures.

  I unplugged and it always goes to the same thing when I turn it back on. How can I fix it

  This problem?

  Thank you

  ducksterman.

  Hi again,

  If it doesn't appear on your printer and not on your PC, right?  My bad... I'm in the driver settings.  Try holding down the symbol # and 3 at the same time on your printer.  This should reset the printer.  If this does not work then press the symbol # and 6 at the same time.

  Or

  To restore the default settings

  1.

  Press Setup.

  2.

  Press to select Tools, and then press OK.

  3.

  Press to select Restore Factory Defaults, then press OK.

  The default settings are restored.

  Let me know if that helps...

• Need help printing on my C7280 Photosmart all-in-one Printer

  I use a Wireless/1100 Inspiron and have been able to print on my Photosmart C7280 all-in-one printer, but now I can too.  Help, please.

  Hello

  1. what happens when you try to print?

  2 have you made changes on the computer before this problem?

  3. do you get any error code or error message trying to print?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the fixit from Microsoft Fixit article and if that helps.

  Problems printing and printing errors:

  http://support.Microsoft.com/mats/printing_problems/

  Method 2:

  Try the steps in the following Microsoft article and check if it helps.

  Printer in Windows problems:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Hope the information is useful.

• 4280 all-in-one printer connection problems

  I can't hang a F4280 all-in-one printer at a Pavilion a1223w PC.  I always get a command prompt which does not recognize the USB connection.  Can anyone help?  Thank you!

  No luck with that - I tried all USB ports and under tension on the cable, but still no connection.  The prompt says "Windows does not recognize USB" any other ideas?

  Thank you!

• Windows RT and HP PSC 1510 all-in-One printer connection

  Hi, I have a Windows 8.1 RT (Microsoft Surface 2) Tablet and HP PSC 1510 all-in-One printer cable. Now when I plug the printer via the USB port, there is no driver who finds himself to make this printer work with my camera. Does anyone have this problem or solutions? I tried to look at HP support and nothing there has been useful.

  Hello

  I'm afraid that the printer is not supported on Windows RT, as you can find listed in the following support document:

  http://support.HP.com/us-en/document/c03168175

  Kind regards

  Shlomi

• Install the HP Photosmart all-in-One printer-D110a malfunction

  I can not the printer HP D110A properly uninstall or reinstall on my computer.  I have a desktop HP Pavilion with Windows 7 64 bit with an Intel Core processor.

  I went through many suggestions on the HP support site, more than once, and the installation failed every time with the message "the system cannot find the file specified."  This message is displayed if I install more software HP Photosmart and pilot or just the HP Photosmart basic drivers.  I went to Control Panel programs and features and uninstalled all HP without change.  I also deleted temporary files and folders without change.

  Once that occurs, I hit very well and it sends a report to HP and shows me an error situation code: 32438568.  The program starts then uninstall points, but - error after a few minutes with the message "HP Installer uninstaller has stopped working".  In the background grey, I can see its order to step 9/11, to the location of the progress of the installation of Software\Microsoft\Active.

  I also tried the HP printer program and searched the forum without success help files.  Please help, I want to just install my printer.

  Problem solved!  Here's what I did to get the printer D110a Photosmart software and drivers installed.

  1 - Download the full version of the software on the HP site.  Do not choose the version of the base drivers.  We will remove unnecessary items in another step.

  2 turn off your antivirus, antispyware, and firewall.  Make sure that you disable all of them.

  3 disable startup: click on the Windows icon in the system tray, type msconfig in the search field and click Enter.  Choose "Selective startup" and uncheck "Load Startup items".  Click 'Apply' and then 'OK '.

  4 restart your computer.

  5 - Disconnect the USB cable from the computer.

  6 - click on the file of the software that you downloaded.  During installation, you will arrive at a screen of welcome from HP with several buttons.  Click on "install".  In the next screen, there are 3 or 4 links.  Click on one, titled, 'Software' or 'select software.  Uncheck the print smart Web, HP Photo Creations and Customer Participation program.  (You will be able to install it later if you wish.  Now we want to simply get the print, scan, and copy functions work).

  7 - proceed with the installation.  Connect the USB cable when prompted.  If you can, test by making an impression and then a scan.

  8. remember to go back to msconfig and check 'Normal Startup'.  Then click 'Apply' and 'OK '.

  9. turn your firewall, antivirus and antispyware programs turn it back on.

  It was the only thing that worked for me.  I found a large number of these instructions in separate solutions of HP and help articles, but I had to put it all together to get the software and drivers to install correctly.  I hope this helps someone.

• Photosmart All in One Printer: HP C5280

  I have a HP Photosmart C5280 printer all in one

  I am unable to print printable discs as it happens with a massage saying a recognized authority as a device that gives direct printing on Cd/DVD discs.the printer works ok, except for printing to disc function

  I formatted my drive hard as I had windows errors 7 0n and found my C5280 everything works before I reinstalled windows and HP C5280 HP software software you Site.

  I hope you can help because it is a very good printer

  Hi @bluesman38,

  Welcome to the HP Forums!

  I see that you can not print on Cd/DVD discs with your printer HP Photosmart c5280 on Windows 7. And I'm happy to help you!

  Please see this post, Re: HP photosmart C5280 usually print on cd/dvd, by @GGtech. As well as this post, HP photosmart C5280 wont print on cd/dvd, to @Shane_R.

  Hope one of these solves your problem!

  "Please click the Thumbs up icon below to thank me for having responded."

• 4580 all-in One Printer connects to the router

  I get the following message when you use the HP printer installation disk that came with my 4580 all-in-one...

  The PC and the printer are connected to different networks.  They must be connected to the same network.  This can occur when you use the manufacturer's default network (SSID) name...

  She claims that my IP address do not match to the top on the same network, etc...

  Is it possible that I can change this manuelly?

  I have a Linksys WRT610n wireless network

  I'm not able to share the printer on the network as my household uses laptops...

  I saw this problem coming before in the forum, but have yet to see someone with a real solution. I spent 3 hours on the phone with HP tech and even with a remote office, he could not remedy the situation... it was several months ago and I tried to do, but I can't ignore it any longer.

  I'm on a WPA encryption... and isn't that although emissions of routwer in 2 widths of band... they have different names... casa big and jones...

  BUT! problem solved...

  Just by chance I have reset the printer wireless settings by default and re-established the connection settings using printing software provided

  Under the software disc menu, click 'Add a device', NOT 'reconfigure the network "... HP has done a terrible job in the description of these menu items when you hover over them... most people gloss over and click without even noticing the nuance of the topics...

  Anyway after doing this it worked... I think that the problem occurred before because that my printer kept a previous router settings and software HP could not reconfigure the IP address of printers...

  (1) Remove HP printer in the menu printer on your PC

  (2) connect your printer via the usb port

  (3) Insert the disk, then go to add DEVICE

  (4) follow the instuction to add a WIRELESS NETWORK

  (5) it should see the printer in the search...

  (6) the rest is self explanitory after all that...

  (7) add other computers using the disc after that because the IP address settings will be defined and all additional computers must do is to install the drivers and locate the printer on the network...

  All that and HP Tech couldn't do that for me, in 3 hours on the phone over the interfacing of remote desktop. So please add this to your ideas of troubleshooting for any future reference. Nevertheless, I love my products HP, we have 3 laptops and of course the printer.

• color print, stopped my photosmart All in one printer c310. How should I do

  My printer has stopped printing in color

  Inke levels are varied but have green ticks

  HP All in one C310 Printer series

  Windows 7 64 bit

  Please check the ink levels... you use the original Hp cartridges? not charging?

  If they are authentic, not empty... can you pls. update your firmware: pls click the link:

  It's the last troubleshooting, if you replace your printhead still pending... I would like to know what happened

• 7525 photosmart all-in-one: printer says wireless, but do not print

  We moved our headquarters to a new location in the House. After you reconnect all devices, the printer seems to work (in his view).  Network test results "spent." When I opened a doc and tried to print, it would not, telling me printer was not in the network. Enter new password for ISP provider crossed wireless configuration. Still not printing.

  I uninstalled and reinstalled the printer. Still will not print. I disabled Norton Internet Security where he was blocking the process. I downloaded Team Viewer so that my son could see if he could help me, but couldn't connect to it to use it. I tried to download HPPrint and doctor to Scan, but it will not download. Any ideas?

  Hi there @MI_OHlady.

  Welcome to the forums

  I understand that you have moved your location of printers and it is not printing via wireless network.

  You mentioned that the print and Scan Doctor will not download, and this could be a problem on the computer or with the internet connection. Could try to use another web browser and try to download and run the printing and scanning Dr. again? I would like to know what are the results of the tool.

  Also, try to make copies of the front of the printer and let me know if they work, or if you see errors.

  I hope to hear from you

• Modem has changed now laptop does not communicate to 7280 Photosmart all-in-one printer

  Updated modem update, now the printer is offline and I can't get it to connect.  When he had changed the name of the network updated modem.  All the drivers are installed and up-to-date.

  Hello

  The problem is solved?

• Printer HP Photosmart all in one printer scanner

  I can not get this camera to be my default printer.  It has been disconnected for a while and now has the yellow!.    I can get a different default printer but it is not what is wanted.

  Why do not all reinstall the printer?

  http://www.shopping.HP.com/en_US/Home-Office/-/products/printers/printers

  below is a link to hp support

• HP Photosmart all-in-One printer-D110a Installation failure

  After spending the better part of today trying to install this printer on my new Dell Inspiron 660 (Windows 7 Home Premium 64-bit), I'm ready to renounce HP printers.  This printer is less than a year and I had it installed on my old Dell Dimension, where he worked with the exception of not being able to to perform a scan of the touchpad.  A big disadvantage, since I had to go to the HP Solution Center and analyze manually.

  But let's go back to our days, I went through all the exercises on the HP support site, more than once, and installation has failed each time, "Fatal Error 1935" as well as MSI. Scan.  Since online search made me think that the 1935 FE could be a Windows 7 problem, I contacted Dell support.  Dell technology has been able to install the printer; He said that he install it in "compatibility" mode  How a normal user is supposed to know this?  There is something left on my desktop - PS_AIO_07_D110_Full_Win_enu_140_126.  I have to keep it?

  In addition, Scan always does not work since the touchpad.  Nor can I open the HP Solution Center.  It returns the message:

  "HP Solution Center cannot work because your device installation is not complete.

  Please connect the USB cable or re-run the Setup program from the installation to a network installation CD.

  If it does not complete the installation, or you do not have the CD, access the HP help files by clicking on the start menu. »

  I don't see any HP help files in my Start menu.  There is a HP folder in programs, filled with a ton of shit I don't need except for the simple instructions, basic to connect the printer to my pc.

  The installation has already been tried, more than once, with the Original CD.  The installation was already made, more than once, the option to download on the HP support page.  And with all the L4 uninstall, I probably restarted the pc more than 30 times today.

  And for growing more, my Temp folder is full of garbage, much of it with HP in the name of the file, as well as six 7z files *.

  To start sounds like it is a driver problem. I want to start to be sure that deleting the software and relocation happened in the best way possible. I want you to follow my steps, I can be sure that we start both on the same page.

  First of all, if you use a USB cable, be sure to remove it (it's important). Do not plug it in again until the software instructs you. Through devices and printers, programs and features and issues Device Manager and make sure that all copies, files, and programs related to the printer are removed. As indicated, and then restart the computer.

  In the menu START menu type "%temp%" and press ENTER. Here, I want you to press Ctrl + A, and press DELETE. Some files you cannot delete them, ignore these files and delete the majority that allows it to.

  find and install SOFTWARE to FEATURE FULL if it is available:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=4023246

  Install and let me know the result!

  Have a great day and a great weekend!

  -Spencer

  PS you should not have to run in compatibility mode with the Win7 this softare, you have to do if the software you are trying to install is something like software WinXP (for example) on a Win7 machine.