Photosmart B110 offline despite its usb cable

Similar Questions

• Is it possible to connect the HP Photosmart C4780 Wireless printer without USB cable?

  Hello

  My family and I recently moved and while moving, something inevitably get lost or left for account.  I am fighting to get this printer and will so I don't have to bother people at the front desk at school to print my documents for me.  I have lost/misplaced both the HP Photosmart C4780 printer software disk and the USB cable.  I have no idea where these things are and have not found them within two months, we've been in the new House.

  I solved the issue of the loss of the installation disk by downloading it from the HP site.  My problem is now getting beyond the USB connection and get the currently installed software.  Because I run on a MacBook Pro, it always tells me that I need the USB key to continue the installation.  I'm on a Verizon Wireless router, and I even tried to find the printer on my wireless network with no luck.

  Help, please!

  Thank you.

  It's the type of cable you will need (ignore the color of the cable, the ends are the important part).

  

  Have a new router is not a problem, but remember the SSID and password wireless exactly, otherwise it will not work (if you decide to try Method 1). It's a bit like "trick" your printer into thinking that your new router is your old a long enough to configure the network settings for the new (desired).

• HP Photosmart B110: cannot install drivers, USB error message

  Hello! I'm stuck installing the software/drivers for my printer.

  I bought a new computer and everything worked fine until I tried to install the printer. I get this error message, and I can't move, so I can't use the printer

  This is a screenshot of the Setup error:

  

  It's strange and I don't think it's really a problem of USB, I have many more devices connected via USB and printer is the only one that gives problems. I also tried to plug it into all possible USB of my motherboard without result.

  I also downloaded the drivers up-to-date for my motherboard, I've even updated the BIOS to the latest version, without result.

  I can see the printer detected from the control panel of configuration/printers, but he said to the drivers installed.

  I'm out of ideas... I don't know what to do, please help >. <!

  Thank you!!

  Hello
  Click the Start button and type folder in the search bar, then open the Temp folder indicated.
  
  Open the last HP installation folder that begins with 7z (e.g. 7zs1234)
  Open the installation folder.
  Find the file usbready.exe and rename it to usbready.old.exe
  Navigate to the main extraction folder (folders that begins with 7z) and run the Setup.exe file.
  
  Now follow the installation and check for the difference.
  
  Kind regards
  Shlomi

• Photosmart B110 usb - wireless connection.

  Hello

  I use a laptop HP tries to print with HP Photosmart B110 which is a wireless printer, however my wireless of the University is not strong enough to make it work in my room, so I bought a usb connector which does not connect to my computer, it makes a noise when I plug it, but whenever I try to print anything it says the printer is offline, even if it is connected! Unfortunately I'm rubbish with technology and so it's not very good, if someone could help me then it would be amazing.

  Thank you, Lauren.

  Glad to hear it! You can mark my post as a solution accepted while others can find this information if they have the same problem?

• HP Photosmart B110: Solutions Center installs - problems of usb - only wanted to scan - how to install the scanner part

  -With the help of HP Photosmart B110

  -Use of Tower/Desktop computer running Windows 7 64 bit

  Printer/Scanner connected via WiFi to router

  -Printer part works, I can print to this device

  -Scanner is accessible via the device Web page.

  I want the software of the scanner Solutions Center.

  I can't install the Solutions Center on Windows 7 64 bit. Setup stops and says that I have USB hardware and driver problems. USB on my Tower is USB2 and USB3 ports. Everything works perfectly and the Windows Device Manager has no problem with USB drivers/devices.

  How can I install the scanner software (or all of the Solutions Center software)?

  Tried to look in the folder for the files of instsaller scanner, nothing seems to work. (pulled other positions where it not install Solutions Center). Computer is working very well, so my only option at the moment is to look through the device's Web page, but it is not the best. And I would like to use the software. Also one third of the software "fax and scan" software and windows does not see the connected B110 (probably because it is on a network and not directly plugged into a usb port), so these two options came out.

  HP forum, help please. Is there a way to bypass the usb part? I use this device on a network. Windows 7 sees (even if only as a printer), so also want windows to consider it as a scanner as well.

  Thank you

  Hi @jedi11csa,

  Thank you very much to get back again.

  I just talked with a few colleagues in this regard, and this problem seems to be more a matter of Windows operating system, if the computer displays that USB related errors as well as the installation had not yet reached the point where it asks you to select your connection type.

  Maybe it's an investigation that is best suited for community Microsoft Forums as my resources have been exhausted in this respect.

  I hope that you are able to find the solution you need.

  Thank you.

• 6525 photosmart eAIO switch to USB cable

  Is there a special procedure to pass a 6525 Photosmart eAIO to Usb wireless?

  Hello

  Just test my Photosmart, very simple:

  (a) turn off the wireless feature

  b connect the USB cable to the computer

  Now my computer can 'talk' to the printer.

  Kind regards.

• Connect the USB cable on my 5510e-all-in-one wireless HP Photosmart printer

  Need me 15 minutes to print a page using my network wireless at home. I decided to connect the printer with a USB cable, but the installation of HP - written installation guide - instructions only show the USB wireless method. I already bought a SPEAKER cable so I'm readt to go one time that I get help. My laptop, that I intend to connect is a dp4 Pavilion from HP with Vista. Thank you.

  Hi there billham68 and welcome to the printer HP consumer Forums.

  Here is a link that should help you in the accomplishment of the task at hand.

  Installation of the software of the printer in Windows for a USB cable connection

  http://support.HP.com/us-en/document/c03521864

• USB cable for printer HP Photosmart C5280

  Sorry for the question "stupid"...

  We have lost the cable that connects the printer to the macBook. Can you tell me what are the specs, so I can find one online? Thank you!

  Here's another cable on Amazon:

  http://www.Amazon.com/Belkin-hi-speed-USB-cable-feet/DP/B00004Z5M1

  You must be able to an electronic retailer (Best Buy, Wal-Mart, Target) and pick one up. Make sure the ends to resemble the one on the Amazon page.

• HP Photosmart B110 all-in-one: wireless printing is not possible

  Hello

  I have my printer connected to my desktop via USB and other computers connect using my wireless network. Sometimes printing from one of the other computers works, sometimes it doesn't.

  If printing does not work I have check the printer and it is connected to the correct network and online. I check the IP address and all withdrew. The computer that I use to print is connected to the same network and sees the printer as being online.

  If I send a document to print, it is added to the queue, and then sits there. With the status of"impression". But nothing happens...

  Today, I tried to delete the printer and add it again. Still no luck. What is going on?

  Hi @Plantje1978,

  Welcome to the HP Forums!

  I understand that you can not print with your HP Photosmart B110, on 10 of Windows wireless. I'm happy to discuss this issue for you!

  Please, try the following steps:

  Step 1: Check if the printer is paused or offline

• Photosmart B110 suddenly stopped printing (Mac user)

  Photosmart B110 stopped printing (mac users)

  My printer, which worked very well last week suddenly stopped working. It is not configured for the wireless, but is connected by cable to my Mac (OS 10.6.8). The printer is turned on, the computer attempts to send that message printer is put on the queue. Then it disconnects. But befoee does, it does not print the last piece (5 lines), text file, then a line of gibberishg.

  I went through the page, deleted in case of problem, printer drivers according to the instructions but then realized I couldn't add them back again. The Mac can't "see" the printer with the USB cable. And there seems to be no way to add them to the "add a printer". It is empty.

  So now, I can't even all print.

  Would appreaciate any help I can get. Thank you.

  Hello

  Try to restart the Mac and printer and check any change.

  So make sure that the most recent driver is installed by clickign the icon Apple, then software update.

  If this does not help solve the problem try to reset the system as follows:

  * Be aware that reset the printer system will eliminate any existing queue and reset all custom settings driver.

  Click on the Apple menu and then click on System Preferences.
  Select print & fax.
  Right click (or Ctrl + click) your product with the Printers list in the left panel and then click on reset printing system.
  Click OK to confirm the reset.
  Type your user name and password.
  Click OK. The printing system resets.

  Now go to Applications > Hewlett-Packard > utility device, follow the HP installation wizard and try to print again.

  Please let me know if this is useful,

  Shlomi

• Is it possible to set up a printer wireless without the USB cable?

  Hello

  I have a HP Photosmart C4580 and I wanted to set up to run on a network, but I don't have a USB cable. I tried to install it without one, but it does not appear on the network, and I was wondering if you really need a USB cable to install it?

  Thank you.

  1. turn Radio on wireless to the printer.

  2. on your computer, search for all available wireless networks. You should find a named "hpsetup". Go ahead and connect to this network and ignore all warnings.

  3. wait 1 minute after have connected you to the network. Then, print a network of the printer Configuration Page. It should list an IP beginning with 169.254.x.x.

  4. type this address in the address bar of any web browser. You will reach the Embedded Server (EWS) Web of the printer.

  5 use the Wireless\Networking tab at the top and looking for an option to ' 802.11 wireless networks. On this page, you will be able to enter your network settings wireless (screenshot attached to facilitate their identification).

  6. make sure that you change the SSID for your network name. Click on the option button 'Infrastructure' and enter your WEP\WPA pasphrase. ENTER THE SSID AND PASSWORD EXACTLY AS IT IS, OR IT CANNOT CONNECT TO THE NETWORK.

  7. click on the button to apply and wait for the confirmation of the parameters being recorded.

  8 restart the printer. Once again the Config network printer page. Now, it must have a such IP assigned by your router and not with 169.254.x.x.

• Mavericks of hp photosmart b110

  I'm sure you can help. I try to get my Photosmart B110a connected wireless to my Macbook Pro in Mavericks 10.9.2

  The printer is connected is the network that I can connect via my browser using IP inside address and I see everything about the printer and I have a choice of menu, it gives me the ink level, confirms the connection, Hello is allowed including host name, status appears as loan. This lead me to the conclusion that the computer is in talks with the printer, the Mavericks just doesn't seem to know that.

  When I select system preferences, click the plus sign + nothing comes up under the default section.

  If I use IP option and I get the IP address of the printer and I have to manually enter the IP address it comes back and tells me that it is HP Photosmart B110 series; Then when I click on Add it comes back and tells me "failed to verify the printer on your network. Unable to connect to? ??. ?. ? reason and error ".

  If I add the printer it shows it is available but I can't print on it. Nevertheless, I can open the printer and I have not even enter the HP printer utilities, it gives me the correct device information, I CAAN print test page, check the levels all that makes the utility. I print quality diagnostic page as I type (and it seems good).

  Then, when I try to print a document, nothing happens and I get the error unable to connect to the printer.

  I am really at my wits end with this.

  Concerning

  Hello

  Try to add the printer using its IP address, however, change the Type of HP Jetdirect and check if that might cause a difference and to allow the addition of the printer for printing.

  In addition, don't forget to specify your router brand and model to better understand its Multicast capabilities, which can affect the performance of Hello.

  Shlomi

• Affirmation of its USB - El Capitan

  10.11.3 OSX

  Logic Pro X 10.2, 10.2.1

  I continue to receive global seemingly random failures when using audio devices, or USB (CoreAudio) audio devices with lots of tracks to WAV, or 2-3 hours of playback of iTunes.

  I only see kernel errors if I run the Console as a user admin! not my normal way of working.

  These are typical log entries

  System.log:Feb 3 11:58:35 iMac kernel [0]: affirmation of its USB in /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleUSBAudio/AppleUSBAudio-302.15/AppleUSBAudioStream.cpp on line 4875

  System.log.0:Feb 2 19:09:39 localhost kernel [0]: affirmation of its USB in /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleUSBAudio/AppleUSBAudio-302.15/AppleUSBAudioDictionary.cpp on line 112

  System.log.0:Feb 2 19:09:39 localhost kernel [0]: affirmation of its USB in /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleUSBAudio/AppleUSBAudio-302.15/AppleUSBAudioDictionary.cpp with return 0xE00002BC on line 3172

  System.log.0:Feb 2 19:09:39 localhost kernel [0]: affirmation of its USB in /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleUSBAudio/AppleUSBAudio-302.15/AppleUSBAudioDictionary.cpp with return 0xE00002BC on line 1676

  System.log.0:Feb 2 19:09:39 localhost kernel [0]: affirmation of its USB in /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleUSBAudio/AppleUSBAudio-302.15/AppleUSBAudioEngine.cpp with back 0xE00002BC at line 1759

  all CoreAudio. Interfaces USB directly connected to the Mac, not a hub. Several, different cables.

  The log console you provided something with OSX Bell indicates himself and not logic... and shows a USB audio device has problems during communications for OS X...

  Not all audio devices play well as... especially the software aggregates those when they have not been updated or are not fully compatible with the current version of OS X used... but also some hardware ones in certain circumstances.

  Then...

  First...

  Using a router Audio Soundflower or Jack for example...? If so, uninstall and test...

  If your device drivers audio use are completely up to date and consistent with 10.11.3?

• HP B110 offline-

  Windows 8 - not marked as offline use, how can I fix it

  Welcome to the SweezM forums,

  If I understand correctly, your Photosmart B110 model shows 'offline' on your system Windows 8. I would like to share my suggestion for you to solve this problem.

  Please follow each of the steps in this guide: "Printer is off-line" Message appears on the computer and the printer will not print: Windows 8

  I hope that helps!

  Have a nice day

• I have; ve reinstalled the software, wireless, everything went through fine. He asked me to remove the USB cable while it printed a test page. But he does not accept printing orders

  I have; ve reinstalled the software, wireless, everything went through fine. He asked me to remove the USB cable while it printed a test page.  But he does not accept printing orders - printer offline.  Very frustrating!

  So, you have a problem with Picasa. You should contact them.

  I also quite what your note 'Wireless' has to do with the question. Maybe it's because you have yet to provide a lot of information...