Photosmart B110a - Wireless Setup Assistant starts whenever it is turned on

Similar Questions

• HP photosmart printer Wireless Setup

  I was given a hp photosmart 6520 without software printer so how to operate?

  Hello

  HP comes with this printer:

  • E-all-in-one printer, HP Photosmart 6520 range

  You can find the drivers to install and configuration information / user to this HP link Guides.

  See you soon

• C6180 Wireless Setup Assistant does not work

  I have a Toshiba Satellite and a HP Pavilion PC, both running Vista.  I replaced the wireless router with a new Cisco Valet M10 - all computers run wireless successfully with the new router.  My printer says "offline" in the control panel.  I restarted the router, the printer and the PC several times.

  I have reset the default settings of the printer and tried to run the wizard from the HP C6180 wireless configuration but it cannot find wireless networks and just keeps searching until I have Cancel.

  I printed the HP network configuration page and lists the IP 0.0.0.0.

  How can I run the installation wizard and get the printer connected to the network or router?  Is it possible to manually enter the network name and the key/password to get the printer to connect to the router/network?  Is there another way?

  Hmm, your wireless radio may be dead.  Print a network Test Wireless in the network menu.

• HP PhotoSmart b110a stops at halfway printing

  When printing from Windows 7 for HP Photosmart b110a cable, the printer starts normally but pauzes at halfway. Nothing happens for minutes, and then he throws the paper and gets a new. Then again, but stops at halfway. Same thing.

  When printing wireless smartphone Android or Ipad I have no problem at all, so the problem is not in the printer I think.
  I already reinstalled complete driver. And the critical update installed on HP site...
  Please help, thx for the Netherlands,
  Steven

  Hello

  As OEM HP is responsible for the good operation of the printer and their
  drivers provided. Check with HP support, their documentation online and
  drivers and ask in their forums.

  HP - Photosmart Wireless e-All-in-One Printer B110a - Software & Driver Downloads
  <- set="" to="" your="" vesion="" of="">
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=4022343&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP - Photosmart Wireless e-All-in-One Printer B110a - Support and troubleshooting
  http://h10025.www1.HP.com/ewfrf/wc/product?product=4022343&LC=en&cc=us&DLC=en&lang=en&cc=us

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably still the drivers but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HP Photosmart premium printer that disconnects constantly with my wireless setup.

  My Photosmart printer disconnects constantly.  I have to go to the Wireless Setup Wizard to bring him back.  I use a laptop HP pavilion dv6-321.  I also have 2 dell desktop computers that are connected is the same too.  I'm using Comcast as my ISP and have a Cisco's Linksys wireless router.  Can anyone help?
  Thank you.

  Hello

  1 did you change on your computer before this problem?

  2. what operating system is installed on your computer?

  What version of the operating system Windows am I running?

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  Follow the suggestions and see if it helps.

  "Method 1".

  Follow the steps in the article.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2

  Check to see if the problem exists in a clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a troubleshooting follow step 7: reset the computer to start as usual

  See also:

  Network printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  (For Windows 7)

  Previous post your answer for you help in this matter.

• How can I disable wireless on Photosmart B110a?

  I had a lot of intermittent problems with the Wi - Fi on my Photosmart B110a, but the USB connection is perfectly OK. I had a few printintouts on my printer from a neiighbour, those unwanted. Please tell us how to completely disable my wireless connection. Thank you, Bill.

  Windows7 64bitAcer ' aspir ' 5732Z

  There is an option to disable the card wireless in the printer.

  * Press the key for the Setup Menu on the front panel of the printer

  * Select the submenu wireless

  * Under this menu is an option to turn on/off wireless.

  I hope this helps.

• Photosmart B110A: Ink cartridges Setup

  Hello world!

  I have reset my Photosmart B110A (by entering the hidden menu) but now when you want to install it and set it up, the process stops because I did not SETUP ink cartridges, but others. How can I fix that?

  Hi @Daniela3,

  I came across this post which, if you want to try it at your own discretion to see if it helps. I'll send you a PM. In the forum next to your handle name, simply click on the envelope to see.

  Thank you!

• Photosmart B110A: Photosmart B110A - missing HP Support Assistant.msi

  Hello

  I use Windows 10 and I just installed the latest

  version of the software for Photosmart B110A

  from scratch.

  The software always tells me that it is missing

  the file Assistant.msi of taking in charge of HP.

  It says Error 1706, and something about a bad resource.

  I don't know where to find the file or how to

  solve the problem.

  Kind regards
  Martin

  Hi @mploug,

  Welcome to the HP Forums!

  I understand that you are missing the file HP Support Assistant.msi for your HP Photosmart B110A, on the operating system Windows 10. I'm happy to help you!

  Please, try the following steps:

  1. Close the window to locate the file with the message "Error 1706", if you don't have already done.

• HP photosmart B110a: change in router, need to change the IP Address of the printer.

  I have a HP photosmart B110a and Windows vista.

  Previous using of my router, I put a static IP address.

  Now, I have a new router and I can not change the IP address of the printer.

  I've already tried

  Factory reset the printer (IP address does not change)

  Turn off/on router/Printer PC

  Type IP address of the printer to the current address in the browser (the page does not exist)

  Connection USB and USB current running to the wireless program that generated the following message "the PC and the printer are connected to different networks (192.168.1.0 and 192.168.0.0).  They must be connected to the same network.

  My Network Setup page shows that I am connected to the identifier SSID is correct

  IP 192.168.0.19

  Subnet mask 255.255.255.0

  Default gateway 192.168.0.1

  Really need help, thanks, George

  Run the wizard from the front panel wireless configuration, then set it to DHCP Auto IP printer.

• all-in-one photosmart B110a: windows 10 and b110a

  I had my B110 series all in one printer works fine for over a year, then I updated to Windows 10 and he stopped scanning. So I tried to remove and reinstall all the HP programs, tried to hook up with cable (as well as wireless), tried Hp trouble shooters and doctors and no matter what I do, the printer setup will crash towards the end of the process and say "fatal error" and "MSI.netdevicemanager40". Someone please help.

  Hello @Jenecessary,

  Welcome to the Forums of HP Support! I see that you have recently upgraded to Windows 10 operating system and you stumbled upon a matter of scanning with your HP Photosmart B110a. You have uninstalled the software, now, when you try to reinstall the printer, you get a MSI error message.

  Please, try disabling your firewall and running the installation to see if it allows you to install, if this does not work try a clean boot and re run the HP printer install wizard for Windows , it was created to help Windows 7, Windows 8, Windows 8.1 and 10 users to download and install the latest and most appropriate HP software solution for their HP printer.

  If you still run into installation errors, continue here: a "Fatal Error" (error MSI) is displayed on the computer while installing the HP Windows software

  Please let me know the results, I'll watch for your reply.

  Thank you

• Error creating HP Photosmart B109n wireless Mac

  I am trying to configure my B109n for wireless printing, but the installer crashes.     The printer is USB connected, but I want to move it to another part of the room.  I'm Runnin' OSX 10.9.2.

  Process: HP Setup Assistant [8324]

  Path: / Applications/Hewlett-Packard / * / HP Setup Assistant.app/Contents/MacOS/HP Setup Wizard

  ID: com.hp.SetupAssistant

  Version: 2.3.12 (2.3.12)

  Code type: X 86 (native)

  Parent process: launchd [163]

  Responsible for: HP Setup Assistant [8324]

  User ID: 501

  Date/time: 12:58:57.895 2014-04-02 + 0100

  OS version: Mac OS X 10.9.2 (13 C 64)

  Report Version: 11

  Anonymous UUID: CD4CC37E-A4CF-B07A-F990-87DC5CF774FD

  Sleep/wake UUID: 43C5067B-3BE5-4FF0-9A93-860D83D611CB

  Crashed thread: 0 dispatch queue: com.apple.main - wire

  Exception type: EXC_BREAKPOINT (SIGTRAP)

  Exception codes: 0 x 0000000000000002, 0 x 0000000000000000

  Request for clarification:

  Run @selector (performContinue ACMCustomButton 0x3592b0 sender)

  Dyld error message:

  Symbol not found: _WirelessIsAvailable

  Referenced from: Hewlett-Packard/Applications / / * / HP Setup Assistant.app/Contents/Plugins/WiFi confirm Settings.WiFiPlugin/Contents/MacOS/WiFi confirm settings

  Intended for: /System/Library/PrivateFrameworks/Apple80211.framework/Versions/A/Apple80211

  Hi PaulEich,

  Welcome to the HP forums!

  I see your message you have a Photosmart B109n you need to connect wirelessly to your Mac running 10.9. Absolutely, I'll do my best to help you with this!

  I think that the software fails is because it has not provided be used with OS 10.9. At this time, HP does not have software complete features, you will need to install it via the Apple updates. Which leads to the next question, how do I connect the printer to your wireless network. To do this, we need to connect the Mac to the printer to get setup things correctly

  Please follow this post that I did, that has worked for others, to get the printer connected to your wireless network. To restore the default settings of your printer network, please press the configuration option, then network, then restore default network, followed by Yes. So to print the Network Configuration page on your printer please follow the steps below:

  1. On the Control Panel, press the button ( ) next to Scan . The Scan/Wireless menu.

• Printer HP Photosmart C390a - wireless radio does not

  I need help with my HP C390a Photosmart Premium all-in-one printer. Suddenly, the other day he lost, it's a wireless connectivity and I have tried everything I can think of to get it to work - printing and Scan doctor, uninstall the printer and reinsert (2 or 3 times), re-starting the PC, the modem-router and the printer etc several times and nothing works. The printer will print when connected by USB but I have run the wireless network Test and it shows that the "Wireless is WE ', but the ' Wireless works is to FAIL. This explains why I can't get the Wireless Setup Wizard to work. She is saying that he is now "looking for wireless routers", but just keeps looking forever until I have cancel it. Also the small wireless icon which was on the home screen of the printer in the top middle (next to the bluetooth icon) has disappeared. Although mysteriously, small blue wireless light on the far right of the keyboard printer stays on. In any case, I really like this printer but I need a wireless, wired not only, so I would appreciate any help I could get with this problem.

  Oh, I forgot to tell you, I also can I made things worse by selecting two default settings of the printer (when nothing else worked), they were: 'Restore the default network settings' and under Tools "restore default settings".

  Here's the rest of the details on my PC-

  I have a hp Pavilion dv6 - 2057cl computer laptop running Windows 7. Our internet provider is Bright House and we have a cable/modem that works well with this printer for the last 3 months.

  As I said, any help will be appreciated.

  Thank you.

  Hello Carol_in_FL,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that your wireless network no longer works on your Photosmart C309a. In the report, it seems that the wireless radio is not working.

  I suggest you then call HP Technical Support to see other possibilities for you, as a replacement or a recovery.

  If you call in North America, the number is 1-800-474-6836 and for all other regions: click here.

   

  Kind regards
  

• Photosmart B110a Wifi Macbook Pro Scan fails after the most recent firmware update: CHL1FN1146AR

  Hi all

  I currently have a problem when scanning on wifi using a Macbook pro (Mac OS X 10.7.3).)

  Printer/scanner/copier is a: HP Photosmart B110a model: CN245B

  Service ID is: 20348

  The driver version is: HP ink Jet 8 pilot 3.5.2

  I used to scan directly into Evernote after completing the following steps:

  System Preferences - print & Scan - Scan - Scanner-open

  At this point the printer stops responding (just the apple turning and turning circle)

  The utility shows HP status: 'Idle '. The serialnumber Sevice ID and model are shown as well.

  Reset the system of printing and reinstalling the driver unfortunately did not solve the problem.

  Even the HP utility informs me that "an error has occurred."

  I tried to press the button 'wifi' on the printer for several seconds to make my router was able to connect to the printer.

  It seemed to work. I can print to the printer, once... grmmph... After successful printing I launched a scan...

  Too bad...

  The message:

  "The scanner reported an error.

  The scan did not complete because the operation was canceled while the analysis was underway. »

  pop up.

  Power - off at least 60 seconds does not resolve the issue.

  This behavior has started to happen right around the time that I installed an update of the firmware on the device.

  The current Firmware version is: CHL1FN1146AR

  I can reach the printer using a Web browser, the printer is showing the status of 'connection '.

  The webscan works like a charm and the self test page print works as well.

  If the printer is in my humble OPINION.

  Please let me know if this sounds familiar to anyone. Maybe a restore to the previous firmware could solve my problem?

  Best regards

  Martijn Krop.

  PS: My router is a

  TP-Link WR1043ND Original newest Firmware. The protocol used is WPA - PSK (automatic encryption)

  Hi Martin,

  First of all, try to reboot the router?

  I always suspect the router.

  Even further because it seems not to support Hello based on the above document, the manual of the router and the router configuration that I went through with no opportunity to locate any indication for its support.

  Please try temporary without going through the router and check the differences:

  1. On the product control panel, tap the Setup icon ( ).

• Photosmart B110a: eprint problems after Windows upgrade 10

  The printer lives in my office, plugged into a Mac.  My laptop connects wireless to it.  You use Windows 7, the laptop could connect to it as a network printer via the Mac, which required that the Mac be turned on, or directly using eprint, requiring only the printer.  After upgrading to Windows 10 I re-installed the printer as a network printer and everything's fine but eprint does not at all.  I downloaded the latest version and I get a 'eprint + Jetadvantage' device in my list of installed printers, but if I select to print anything it either nothing happens.  The call to the top properties of the printer shows an error message saying "eprint driver is not installed on this computer.  You want to install it now? ».  This leads to a "pilot Add Printer Wizard" which lists a driver of HP eprint.  Try to install this product a message that I am about to add the following driver "HP ePrint, x 86, Type 3 - User Mode" but nothing seems to happen and I still get the missing pilot error.  I uninstalled and reinstalled several times without success.  I ran the HP Scan doctor and print, but it can't even connect to the eprint printer.

  Any notice received with gratitude.

  Hello @Ticfan,

  Welcome to the HP support forums.

  I understand that after upgrading to Windows 10 that you can no longer use the driver ePrint.

  The first thing I want to address is the "ePrint + Jetadvantage".

  It is not the driver ePrint have you need or want. I will not go into too many details about it, but it's a commercial product and the Photosmart B110a is not supported. It would be best to uninstall this piece of software.

  The following link will take you to the correct driver.

  You can select 64 or 32 bits depending on your operating system.

  HP ePrint Software

  I'm curious about something. How is the printer is not on a local network with other devices? How is it, you chose to go through the Mac? Why not have the printer on Wifi and having the laptop connect without having to go through the Mac? Maybe I'm missing a part of the installation, but this seems more complicated then it must be.

• PS B110a - wireless configuration will fail if the network has multiple access points

  Photosmart B110a (CN245B) wireless AIO printer.

  I have several wireless access points using the same SSID to provide coverage over a large area. When you install the printer on the screen TouchSmart wireless installation fails. Print report reveals the following error:

  "More than one access point/router wireless was found which matches your network name (SSID). If this is not intended, your HP printer can connect to the wrong network. »

  In my case this IS planned but there seem to be no available option to answer "OK, just connect to any point of access by using my SSID.  If I turn off all but one the APs configuration complete OK. If I have to do every time I turn on the printer the printer is USELESS for me.

  Did I miss something?

  sijomi

  This should not be a problem.  I have a B110 (and another 10 or so HP wireless printers) on a network of airports with 5 access points and they just connect.

  Here are a few suggestions:

  1. don't use WEP - use WPA or WPA2 with a 13 + character password.

  2. enable the SSID broadcast on all access points

  3. do not use the MAC filtering acddress

  4. make sure "AP isolation" or "isolated wireless" is disabled.

  5. make sure that you are not on a private network, virtual, or connected to your network of comments.

  6. If different strings on access points do not work, try the same channel.