Photosmart C & 180 will not print red

Similar Questions

• Will not print red

  Hi, I own a number of hp photosmart premium c310 series: model {deleted personal information}: cn503a it will not print red. Have preformed obvious troubleshooting, other technical suggestions. Could not do stack or facing other alternatives with similar problem

  Did you also check to make sure that the printer firmware is up-to-date?
  I would like to do a manual cleaning the contacts on the cartridges, the printer and the print head next to ensure that this accumulation on these pieces is not the cause of the problem. Solution 4 this document here shows how to clean the contacts of the cartridge on the cartridges and the printer. The solution in this document here shows how to clean the print head. I know that the titles of the documents do not meet your specific question, but they are the steps to take to remove accumulation. If you have the print head of the machine, take a look at the printed on date while you clean the contacts that the date is in this part of the printhead. If this date is not passed, this is a replaceable part that can be troubleshoot-performed and replaced by contacting HP Total Care. If this date has passed, please post back with this date and I can give directions over here.

• Photosmart HP 5510 - will not print using black ink

  I have problems with my HP Photosmart 5510 all-in-One printer, because it will not print in black. All cartridges are brand new and are genuine HP cartridges. I've never used anything other than HP cartridges, and I believe that I have would be considered a very light printer user.

  I use a HP Pavilion Desktop PC (Vista Home Premium) connected to the printer via a USB cable.

  I have to 'reset' the printer (power cable removed for 20 seconds), I cleaned the print heads and tried to re-alignment of the printer.

  I ran HP print and Scan diagnostics and do the message "Everything out OK with your product." I then print a test page which "fails", that there is no black ink in use. The diagnosis confirms that the ink levels are all OK and that my printer uses HP authentic and than Normal inks or better quality is selected.

  The printer is a little over a year old and as mentioned has had very light use.

  There is no error - every reason to believe that everything is OK.

  I wish I had a solution to this problem.

  As by chance my previous printer a HP Photosmart 3210 all-in-One failed in a similar way, although in this case, the black was fine, it was impossible to print colors correctly. Once the printer was just out of warranty.

  Curiously enough and fortunately like few others on the forum a few days after the installation of the new cartridge, it seems to work perfectly fine again.  any ideas as to why this happens?

• Photosmart Plus B210a will not print on the Windows XP computer, but works on the Windows 7 computer

  I just got a Photosmart Plus B210a printer. I was able to install it using the wireless for my Dell Dimension 3000 3 GHz computer with Windows XP 32-bit SP3. He will answer analysis, but it will NOT print, it doesn't matter what I do. I have a Netgear wireless router. I tried the Dell connected directly to the router using a USB of Netgear WG111v3 USB adapter and cable. No impression whatever the configuration.

  On the other hand, I was able to make the printer work with an Athlon II X 4 630 with Windows 7 Professional 64 bit AMD machine. Everything works independently to know if the machine is connected directly to the router Netgear or using the above USB adapter.

  How can I make work B210a with my Dell with Windows XP? Is this a problem XP because Windows 7 has worked perfectly, but Windows XP would only scan.

  Subsequently, I deleted all initially loaded B201a software. At the printer detects the network, then reloaded the software from the CD. The printer then worked fine. What a relief. Perhaps the problem I had previously was linked to my trying to use the USB port when the printer originally did not work.

• HP ColorJet 2600n: HP ColorJet 2600n will not print RED

  I have all new 4 124 HP toners and HP124A (combo) installed at the same time, but the red color does not print. I had the same problem with the last 4 tones and thought the Magenta was BAD, and now with all new shades, the problem is still there. Help, please!

  The goal of the scanner is sprinkled on.  Here is a sheet of instructions with pictures on how to repair.  It will take some time but works perfectly when you are finished.

• Designjet z5200 will not print red

  I use the z5200 for printing of banners, posters, and other major media print from photoshop.

  Red do not print correctly and is often replaced with colors salmon-ish or brown.

  Please notify

  No... print head only... ink was very well.

  #70 print head is yellow and magenta together.

• Photosmart HP 5510 will not print.

  Black in do not print! Ugh! Brand new black cartridge low on the colors.  Went through all the normal procedures for the clean printheads, aligning printer, get out the ink and handed in...  Colors will be printed on these pages, but not black.  Yes, HP cartridge not a fall. Help!

  This document can enlighten us here:

  http://support.HP.com/us-en/document/c02914910

• I have a Photosmart 6510, which will not print in black.

  My photosmart 6510 does not print in black, after that I installed all the new HP ink cartridges. I am running Windows Vista 32-bit.

  I tried all the basic tests & troubleshooting but who still have the problem.

  It allows to print from the photo tray 4 x 6 end.

  Help, please!

  Steve

  Hello bcgoodwrench,

  I don't see you mention the presence of 'BLACK'.

  
  If there was no black printing, then I would say you call the HP Technical Support for assistance.

  If you are in the United States, the toll free # is 1-800-474-6836 .

  If you are not in US , then log on to www.hp.com , bottom left there is a world map icon, click it, and then select the region that you belong to, which would then provide the support options for you for this region.

  Kind regards
  Jabzi

  Help the community by marking this post.
  Your question has been answered? Mark it as a accepted Solution!
  See a great post? Give it a Bravo!
  I work for HP

• HP Photosmart 7520 series will not print from laptop

  Printer not print HP Pavilion dm4. Error message is the driver problem Microsoft Teredo Tunneling adapter with an error code of 10. Help, please!

  Hello

  Please try the hotfix o instructions to the following address:

  http://appuals.com/Microsoft-Teredo-tunneling-adapter/

  Kind regards.

• Photosmart Premium c310 will not print from the photo tray. Market power does not work.

  HP Photosmart Premium c310 refuses to print from the photo tray.  I use an iMac.  I shot tray in and out, nothing.  I stoked market, nothing.  Whenever I try to print a photo, it pulls the main tray.  He doesn't even try to pull the photo tray.  And I select in the settings of Photo paper in the photo tray.  Oh, and I have never tried to print before photos.  This is my first time and it won't work.  Printing regular documents from the main tray works fine.   Can someone please help?

  Are you printing from iPhoto?  If so (and this may apply to other applications), you must specify the format and print size.  Make it look like this:

  

• My Photosmart HP 6515 will not print in black

  My hp 6515 not print black, I replaced the cartridge,.

  Hi Frank,.

  Consult the troubleshooting provided by Hp paper

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c03760633&tmp_task=solveCategory&cc=us&DLC=en&LC=en&product=5191794

  If the problem persists, contact HP.

  http://h30434.www3.HP.com/

  Hope this could help you. If you have any concerns related to Windows, let us know.

• C410 Photosmart will not print red after magenta cartridge replaced

  Hello

  I just replaced the cartridge Magenta on my Photosmart C410, it was a genuine HP cartridge and the printer shows ink levels are now full but when I try and print anything in color that it is, or printing of the Red hues.  Any suggestions as to what I can do?

  Thank you

  Hello

  Please click here here for access which should solve the problem.

• Photosmart HP 5510 will not print in black

  I replaced the cartridge, made sure that the cartridge was evacuated, but could not find the control panel how to clean the print head. I followed the instructions carefully, but my computer laptop gateway has not called to configuration tools.

  Hello patl46616,

  Welcome to the HP Forums!

  I understand that your Photosmart 5510 print no black ink. I will do my best to help you! You can "Clean printhead" on the control panel of your printer:

  1. Make sure that this ordinary letter of white American or A4-size paper is loaded in the tray.
  2. From the Control Panel Home screen, press the right arrow key ( ), then tap the Setup icon ( ).
  3. Tap Tools , and then tap print head cleaning . The printer cleans the print head and then prints a test page.

  Also, follow this HP document on fixing of the streaks of ink faded prints and other common Print quality problems Please post your results, I will be looking forward to hear from your part have a good night!

• 895cse will not print red or yellow

  Arrested 895Cse print any color (white). I put in new cartridge. Now, it will print blue but not red or yellow (again just empty). Black is fine.

  OK, a few things to check - I would start with the date on the cartridge as described in this document.  A few years ago, I ran across a major retailer who had long expired cartridges for sale, they probably would have questions right out of the box.

  Although it is possible, this could be caused by a printer hardware problem that is less likely, that all colors are driven by a single chip driver.  It woud not likely that two of the colors fail but cyan would still print as a result of the failure of the electronics.

  A way to check the cartridge would be as follows: remove the cartridge and gently pat dry the nozzles on a wet tissue.  A good cartridge would have strong cyan, magenta and yellow stripes.  If your cartridge only displays a task strong cyan, with a bit of magenta and yellow, then maybe it's the problem.

  If the task of cartridge shows not all colors there are a possible (but maybe temporary) solution.  Put a little folded paper towel in the bottom of a cup and drop of the cartridge on paper.  (That would be the same orientation that would be the cartridge in the printer).  Pour in hot water to a depth of about 1, 5-2 "and let the cartridge to soak for about ten minutes.  After soaking, remove the cartridge and gently dry the electric contacts with a fluffy - a coffee filter works well.  Replace the cartridge in the printer and try to print the page of diagnosis as described in this document.

• ALL-IN-ONE PHOTOSMART HP 5510 WILL NOT PRINT AFTER GO 'SLEEP' MODE

  My printer model:

  HP PHOTOSMART ALL-IN-ONE 5510 B111A

  Problem:

  Printer goes into sleep mode. After 25-30 minutes breaks the connection between the PC and the printer wireless. Beacon wireless is the same fashionable "sleep" and I see that the printer is connected to my router and there is internet connection. HP Print and Scan doctor sees the printer, but I can't wake the printer unless I restart it.

  What I've tried so far:

  I tried all the solutions offered hp.com; Reinstall driver, updating the printer software, setting static IP on the printer, static DNS servers, using HP print and Scan doctor.

  I've seen people questioned on this issue before and there is no solution. I really need help from HP!

  After days of research, the problem was finally solved! I applied the following steps below. Some steps may be unnecessary, I didn't waste my time knowing who.

  1. find your PC's DNS servers by typing ipconfig/all in CMD.
  2. assign a static IP address outside your DHCP range. For my Linksys router him between 192.168.1.100 to 192.168.1.150. So I put my static IP address as 192.168.1.20.

  To do this, click the button on your printer wireless. This will show the IP address of your printer. This type of your browser. Go/network/network address. Choose manual IP and write 192.168.1.20

  3 now come to section of the manual DNS server, and then type your DNS servers, you found before.

  4. open your HP printer program that must be installed with your driver. Utilities hit and update the IP address. Update your address with your static IP address.

  5. now go to your router settings. Find the wireless settings and change your not automatic standard 20 MHz radio band.

  6. change your standard channel to 6.

  7 find the wireless security and replace your WPA-personal security mode.

  8 disable UPnP

  9. This is the part of the KEY. Change the renewal of your key to 36000 seconds. (10 hours)

  10 go to the Windows Advanced Firewall. Enable all the disabled printer and share, entrants and outbond rules.
  I believe that the most important parts are affecting a static IP address outside your DHCP-range and change the key renewal time. I hope this works for you too