Photosmart C4780: Impossible to reconfigure the network on Photosmart C4780

When the upgrade of our wireless home network, our router has been updated, so I need to go to a re - configure our printer for the new network SSID and password only I can't.

WPS does not work, use the push button or the PIN method.

If I plug the printer via the USB port, using the HP configuration utility (System Preferences > print and fax > utility > Open Printer Utility > devices > new device setup) the printer is recognized, but the Wizard allow me to advance to the configuration of the network directly - settings I get a message telling me that "The selected device is already Set Up.

I tried the printer hard reset, I downloaded the drivers directly, I tried searching for SSID the printer (doesn't seem to be a radio) and I factory reset the printer wireless settings.

I'm puzzled.

Take a look at the attached screenshots - I'd love to hear that you'e got a solution for me. I wouldn't have to buy a new printer.

Legend: If only I could go to these points on the left...

... But I can not...

Please provide detailed information gabeuscorpus.

That the software you are trying to use to set up the printer is for an older Mac.

I would uninstall the old software. Yosemite drivers are installed by the Apple updates and the HP utility must not have been installed. Monofunctional and HP - uninstalling the software of the printer multifunction printers.

Set up the ad-hoc connection has nothing to do with the router. We use the Adhoc to test the operation of the equipment and the operating system. Because you see not the printer in the list to connect to, we have to solve the equipment before attempting to reconfigure the printer to the router.

Run the wireless network on the printer Test.

Press the Scan button (it also the wireless menu button)
Select wireless settings
Select the wireless network running Test.

Check next wireless on watch Pass and work wireless shows Pass.

Let me know.

I'll send you another step to try in a private message.
In the forum next to your handle name simply click on the envelope to see.

I would like to know what the results are.

Thank you.

Tags: HP Printers

Similar Questions

  • Cannot access the network drive or impossible to mount the network drive. Error "network path was not found.

    Original title: network path was not found

    HI, after the upgradation from windows xp sp2 to sp3 (next to the customer) I can't access the network drive or impossible to mount the network drive. ' ' It showa error "network path was not found.

    Hi gauravadavadkar,

    Thanks for posting your query in Microsoft Communities. Provide the following information:

    ·         Did you do changes on the computer before the show?

    ·         What is the full error message?

    ·         Work on a domain?

    Follow these methods.

    Method 1: Temporarily disable the security software.

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 2: Follow these steps:

    Step 1: Start the computer in safe mode with networkand check if the problem persists.

    S tep 2: if the problem does not persist in safe mode with networking, perform a clean bootto see if there is a software conflict as the clean boot helps eliminate software conflicts.

    Note: After completing the steps in the clean boot troubleshooting, follow the steps to configure Windows to use a Normal startup state section of the article to start the computer to a Normal startupmode.

    After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

    (a) click Startand then click run.

    (b) type msconfigand click OK.
    The System Configuration utility dialog box appears.

    (c) click on the general tab, click Normal Startup - load all device drivers and services, and then click OK.

    (d) when you are prompted, click restart to restart the computer.

    Method 3: Follow the steps in the article.

    How to troubleshoot a network home in Windows XP

    In Windows network connection issues

    You can read this article for more information:

    Windows wireless and wired network connection problems

    I hope this helps. Let us know if you need more assistance.

    Thank you.

  • I need to reconfigure the network wireless repeated now

    I need to reconfigure the network wireless repeated now.  Internet connection drops and I re - check the box 'use windows to configure wireless network. "  Why this keep happening?

    Provide more information, including the version and service pack of Windows, the brand and model of your computer and the make and model of your wireless adapter.

    In the meantime, however, your description sounds as if you have a utility provided by the manufacturer of your computer by the manufacturer of your wireless card which is competing with Windows for control of your adapter.  You must choose one or the other; You can't have both at the same time.  For a general introduction to the present, see http://www.ezlan.net/wzc.html

  • Impossible to change the network name to an existing network

    During a recent upgrade of windows 7 to 10 the procedure at about 80% and froze with the error 8007002C - 4000D. Windows 10 not able to complete its update, the system proceeded to reinstall windows 7. Once this is finished, I found that he had lost access to internet, ipconfig address had been changed and a new unidentified network had been set up, which I'm unable to edit or delete. After spending 2 days trying to get this PC to normal with 7. I tried the 10 upgrade again, but with the same result. I can't figure out how to get my PC to Windows 7 because I don't know how I've changed the name of the network in the first problem.

    To explain my network configuration of the PC with the problem Desktop which is Ethernet is connected to a router with 3 laptops wireless and a wireless printer. Laptop computer and printer seem to work fine, and the Office can see these devices but cannot connect to the internet or a network.

    I fixed the IP address of the desktop computer and tried everything I can think but cannot add this PC to your existing network.

    Why Windows 10 cause this problem that I'm not sure, but my main concern right now is to get this PC to its previous state.

    You would be extremely grateful if anyone could offer some advice.

    Thank you

    Fortunately, I managed to solve the above problem.

    After contacting my antivirus software company to find out if one of their customers had the same problem and the reception not good answers. I found another forum that advised people to uninstall the antivirus software and disconnect all external devices such as hard drives external, printers etc.

    After following these tips Windows 10 downloaded and installed without any problems.

    Hope this helps other people with the same problems.

    Thank you

  • Unable to connect to the wireless network and also impossible to uninstall the network wireless driver

    Original title: wireless network card problem

    I have a laptop HP g series.

    I am not able to connect to Wi - Fi. The network symbol that appears at the bottom right does not appear. Solve the problem. He said it was a problem with the driver for the wireless network card. I tried to uninstall the driver, and this is the error I get.

    Hi Jimmy,.

    For a better understanding of the issue, I would need more information on your side.

    1. How do you uninstall the network driver?

    2. What is the number of the model of the laptop?

    This problem could occur due to corrupted wireless network driver.

    If you haven't tried these steps, I suggest to uninstall the driver from Device Manager wireless network and install the latest driver for the wireless network on the site of computer manufacturer.

    Step 1: Uninstall the wireless driver.

    a. Click on the Start button , and then type Device Manager in the Search.

    b. open the Device Manager and double-click the network adapter to extend.

    c. right-click on the driver wireless network which entered and select Properties.

    d. in the window open, click the drivers tab.

    e. in the tab drivers , click the Uninstall option.

    Step 2: Install the latest driver for the wireless network on the site of computer manufacturer.

    HP G laptop support

    See the articles for more information.

    Wireless and wired network problems.

    How can I troubleshoot network card?

    Hope this information helps. Answer the post with an up-to-date issue report to help you further.

  • Impossible to change the network name/icon

    My PC has three available networks. One is the network of the company, the other is a network of Connectify and the third is my guest network only Virtualbox.

    The corporate network and Connectify can I change the names of by clicking on their icons in the network and sharing Center. No problem. But for the network Virtualbox Host-only, I can click on the icon, but I can't type a different name, do not choose a different icon. The text box for the name is read-only, and there is no button 'choose icon '.

    Why?

    Virtualbox Host-only networking is currently showing as 'Unidentified network - Public network' with a bench icon. I don't want that, because it is incorrect. It's actually a * very * private network, nothing public about it, so I wanted to change his name at least.

    Why inappropriate?

    How can I qualify?

    Thank you!

    Hello

    The question you posted would be better suited to Windows 7 IT pro community.
    http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  • Impossible to change the network location of the public in the network and sharing Center.

    I'm unable to change the network location of the public to the private sector or at home. In network and sharing Center, he is listed as unidentified network, and under "Public network" is written in black and is not clickable.

    I have a connection high speed (USB connected) also listed above under "Home network", it is written in blue and is clickable.

    The affected connection is an XBOX 360 connected via a network cable. I wish to connect the XBOX to the Internet via ICS, but cannot do so until this connection is either private or at home.

    Things I've tried so far;

    Reinstall the drivers,

    disconnect and reconnect, turning on all the elements concerned.

    All ideas,

    Tourist shifty.

    Enable ICS on the connection Strip and not on the XBOX 360 connection.  When you do this, the connection of the XBOX 360 will still be confused with a public network, but everything should work. Boulder computer Maven
    Most Microsoft Valuable Professional

  • Impossible to reconfigure the Virtual Machine error

    Hi all

    Newbie here.  I am trying to convert my Windows XP Version 2002 SP3 (it's a virtual machine) to my new IMac with Fusion 4.1.1 (536016).

    When I run the migration agent, everything is fine and he says his will last about 2 hours.  20 minutes or so, I have error with "unable to reconfigure the target Virtual Machine.   My PC is up to date with Windows updates and pretty vanilla.

    Here are the last few lines of my log file:

    EIP backtrace [16] 0x101362c3 ? GetThreadId@System@Vmacore@@YA_JXZ
    _endthreadex eip 0x781329bb backtrace [17]
    _endthreadex eip 0x78132a47 backtrace [18]

    [08-03-2012 07:18:10.124 01264 verbose "PropertyProvider"] ASSIGN RecordOp: info.transferRate, task-1
    [08-03-2012 07:18:10.124 01264 verbose "PropertyProvider"] ASSIGN RecordOp: info.completeTime, task-1
    [08-03-2012 07:18:10.124 01264 verbose "PropertyProvider"] ASSIGN RecordOp: info.error, task-1
    [08-03-2012 07:18:10.124 01264 verbose "PropertyProvider"] ASSIGN RecordOp: info.state, task-1
    [08-03-2012 00276 verbose 'Ufa.HTTPService' 07:18:10.124] HTTP: Complete (processed 1315 bytes of response)
    [08-03-2012 07:18:10.124 01264 info "App"] [task, 374] task [1] - ERROR - convert: converter.fault.ReconfigurationFault
    {(converter.fault.ReconfigurationFault)
    dynamicType = < unset >
    faultCause = (vmodl. NULL in MethodFault),
    Description = "Preparation of Reconfiguration failed",
    MSG = ""
    }
    [08-03-2012 03472 verbose 'HttpSvc.HTTPService' 07:18:10.358] User agent is 'VMware-customer '.
    [08-03-2012 03472 verbose 'HttpSvc.HTTPService' 07:18:10.358] HTTP response: customer: NeedsContentLength: true UnderstandsChunking: false CanKeepAlive: true (PresetContentLength-1)

    Any suggestions for what may be the problem are greatly appreciated.

    Thank you

    Jim

    There is no configuration file .vmx in the packaging of the Virtual Machine,

  • Impossible to change the network of public

    original title: fixit 50725 stuck in public mode... DOES NOT WORK

    Updated my vista dell desktop computer to 7.  have been ethernet lan network wireless work, well, I have created will only display in public mode and is immutable.  have run the fixit 50725 automatically and manually... makes no difference.

    Network and sharing Center shows both my local network and my network 'public' as having access to the internet.  my hp laptop (also 7) shows connected to the 'home' network, but without access to the internet.

    How can I fix it?  is there a fixit more better?

    Thank you

    MEW

    Hello

    After my exhaustive research and comprehensive help... patches did not work.  What? ... I went out and bought a cheap router... plugged into the LAN and I'm in business.

    In retrospect, being a great master says: "If the Microsoft software you went down... rely on third party material to solve the problem."

    Thank you all.

  • Impossible to install the network card for Virutal Machine (WINNT)

    I have just Converter a Windows NT of the physical machine in ESX server. Then I added a network adapter for the virtual machine, but it seems that the virtual network adapter may not be recognized by the Windows NT system.

    Please tell us how to install a virtual network adapter for WINNT.

    Qucik response you will be highly appreciated.

    Hmmm... strange, so I'm guessing that you use not NT4 service pack 6 as your installation CD.

    If you cannot use the latest service pack, you should always be able to get from the amd website.

    For example, try: here

    --

    Wil

    _____________________________________________________

    VI-box tools & scripts wiki at http://www.vi-toolkit.com

  • VMware Converter standalone 4.0.1 gets 97% error: impossible to reconfigure the virtual target computer. Linux P2V conversion

    I have 97% then it goes down. I'm conversion server Ubuntu 9.10. I will attach the logs. "GrubInstaller::InstallGrub: /usr/lib/vmware-converter/installGrub.sh failed with return code: 127 and message:

    /VMware - updateGrub.sh: 38: grub: not found

    GRUB runtime error

    Vmware runtime error - updateGrub.sh through chroot into/mnt/p2v-src-root

    22/10/09 discovered Ubuntu 9.10 uses Grub2 is the problem and can it work with Grub2?

    Let me know if you can help.

    OKI I did the P2V and after it failed to 97%,

    I started the virtual machine with the LiveCD mode help, connected root to/dev/sda1, installed grub2 and finally ran "upgrade-from-grub-legacy".

    After the reboot, everything works fine.

    So no need to replace your UUID and all that. That should be enough.

    Thank again for this band of working capital.

    Bragi - of Iceland

  • How to reconfigure wireless network extended with several base stations

    I have a wifi network in an Airport Extreme wired to the modem from our Internet service provider and an Airport Express Terminal extended wireless in another part of the House. I recently added a second Airport Extreme (also extended wireless) to boost coverage in another area of the House. I want to have the Express and the extreme second each wireless connection directly to the base station to the modem to have the shortest path to the main base station, but the Airport utility network diagram seems to keep showing the network of linearly (main Extreme base - second extreme - Express). So, two questions: first, represents the schema of utility Airport the signal path real (linear Express by Extreme II, then to Extreme II/modem)?  And secondly, if so, how to reconfigure the network to have both Express and Extreme II forking the extreme base I directly, rather than having the food by Extreme II, then Extreme I Express. The network showed that the desired branched network yesterday, but today went back into the linear trajectory. I tried a simple drag and drop graphic to move the Express, thinking that surely the Apple would implement such a simple, logical and direct way to manage the network, but no. Have not seen another way to configure the network manually, so any suggestions would be appreciated.

    It is very important to understand that Apple "extend a wireless network" works on signal strength.

    In order to have the AirPort Express and AirPort Extreme to extend the network of the 'main' extreme wireless, two conditions must be fulfilled:

    (1) the AirPort Express and AirPort Extreme extension should both be on the same relative distance of the extreme 'main '.

    (2) AirPort Express and AirPort Extreme extension must both be closer to the extreme 'main' they are to each other.

    In other words, a well put together would have your "main" AirPort Extreme in the middle of the House, with a Terminal AirPort Express on one end of the House and the AirPort Extreme to the other end of the House.  In this configuration, the two airports are about the same distance from the extreme 'main'... and... "" oth extending airports are located more close to the "main" airport that they are with each other.

  • HP Officejet 5740: disconnects from the network

    IMac El Capitan & Airport extreme router

    Printer will connect and stay connected while Mac is turned off.

    Turn on the Mac and the wireless connection is lost

    In some cases "impossible to find the network" in others, bad IP address.

    Have you tried wiring printer to the router (ethernet USB) same results

    Also tried hard wiring for Mac

    and finally no. son... basically all with the same results.

    Have tried all the suggestions reboot router, Mac, printer...

    Connects and disconnects...

    Need help

    I wanted to leave you hanging...

    Contacted Comcast and said that my modem is too old and it to replace.

    Now, I have a new modem/wifi combo and everything works.

    It reminds me of the guy who bought a button of his jacket and ended up having to buy a new jacket for the button!

    In any case thank you for your patience, and all's well that ends well.

  • Cannot search the network for Microsoft Windows (XP SP3)

    Hello

    On holiday, I have a PC running Windows 8.1 and a former under XP (SP3), both connected to a Netgear router for Internet access.

    Under Windows, 8.1, the XP PC appear not at all, even when I search by name.

    The WinXP when I click (down posted by exploring folders) on "Microsoft Windows network", I got an Error Message:

    Impossible to scan the network, you have no network, or the network is not started.

    I've followed all the recommendations for sharing files between Windows 8.1 and XP:

    Same network type: private

    Even working group: PERSONAL

    Different names.

    Option of sharing files on two PCs in network settings.

    Windows 8.1, I chose: encryption 40 or 56-bit.

    I can share folders between your desktop in Windows 7 with Win 8.1 and Windows XP Home.

    File sharing has been possible, in my view, before I've upgraded to SP3 of XP last year.

    I know that Windows XP is not supported, but I need this old PC to display movies on my old TV (S_Video)!

    Thanks for your replies.

    MdParis

    In addition...

    You may translate the error of another language?

    On the XP computer.

    • Click Start, run, type "services.msc" (without the quotes) and click OK
    • Scroll down to "Workstation" (probably the last item in the list) and double-click it
    • Make sure the "Startup type" is "automatic".
    • Click on the 'Start' button (if the service has already started, please report this), and then click OK
    • Close the Services applet
  • Cannot connect to internet after a reboot before you uninstall and then reinstall the network card. (After the upgrade to Windows 7 from Vista)

    This problem started immediately after the upgrade to Windows 7 Ultimate (32 bit) to Windows Vista Ultimate (32 bit).  Again, I want to remind that I never had this problem before installing Windows 7.

    -After a reboot, I am presented with the impossible to connect the network indicator (yellow triangle with!) in the task bar.  (It was how I was welcomed after the installation of Windows 7 is said by the way).

    -The only way I found to regain connectivity is to uninstall and reinstall the network via the device manager card, date at which the computer always successfully connects and remains connected until the next reboot.

    Network card: Realtek RTL8168C (P) / 811C (P) Family PCI - E Gigabit Ethernet NIC (NDIS 6.20)

    Driver provider: Microsoft
    Driver date: 14/05/2009
    Driver version: 7.2.1127.2008
    Digital signer: Microsoft Windows

    Thus, we have solved the problem! There are two possibilities of your problems:
    1 company Adobe uses the Bonjour service , this service should be disabled.
    Computer > Manage > Services and Applications > Services => find the bonjour service (sometimes stated as long numbers), stop service and if the Disabled value. It works!

    2. If it is not signed as Bonjour service. Try to disable the service:
    Shutdown mDNSResponder .exe (he is represented by # Id_String1.6844F930_1628_4223_B5CC_5BB94B879762 #).

    It is installed with Adobe software. If you upgrade the Vista, it will generally many users problem!

Maybe you are looking for

  • Memory update by Satellite L300-1 has 3

    I have a L300-1 to 3 with 4 GB of Ram. Running Windows 7 Ultimate 64-bit Edition. I would like to know if I can improve memory in modules of 2 x 4 GB?Colin

  • mouse Magic 2 OS 10.10.5 scroll

    Hi there my new mouse Magic 2. scroll in my MacBook Pro in late 2008 with OS 10.10.5. It's funny because in my macbook 13' run with no problem, when I plugged the cable of lightning he acknowledges, and I didn't have to change the settings. With this

  • Equium does support Wi - Fi?

    Hello Go back to college soon and I was wondering if this computer supports Wi - Fi? Thank you Laura

  • Pavillion dv 5: sink clock

    I upgraded my OS from vista to windows 7 I get a constant problem with the clock not being is not sincronized after laptop ristart I changed the primari battery (CR2032) and clean the seat of it but when I turn off and ristart the clock is always up

  • ACER Aspire R13 set up as an office

    I just bought an ACER ASpire R13 at costco and I try to use as my office too.  I wanted to know what kind of equipment is recommended to do this, docking station, additional external hard drive, etc. and tips/advice on the implementation.