Photosmart C4795 on Windows 7 64 bit Setup error

Dear experts,

I was faced with a boring issue while installing HP Photosmart C4700 all-in-One Printer series full feature software and driver recently I donwloaded the HP Web site.

During installation, the window suddenly closes when the' updates'. No error message or anything that might tell us what has gone wrong, it disappears from my screen.

I found the post following with exactly the problem as mine but produces different. I tried this solution but it does not work for me: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/hp-photosmart-plus-b209a-m-driver-inst...

I hope someone can give me a tip because I'm really out of options here.

I appreciate all help.

Thank you
Ricardo

Hello Ricardo,

Rental try, proceed as follows and let me know the results:

  • Start the installation and follow the steps until the display of EULA (license agreement).
  • Click on the link 2 - using the Internet connection settings and select No, thank you for both of these questions.
  • Confirm the selection, to accept the EULA and continue with the installation which should no\w go further.

Plese I want to know if this is useful,

Shlomi

Tags: HP Printers

Similar Questions

  • Photosmart 8450: Does the Photosmart 8450 under Windows 7 64-bit card reader work?

    Under Windows XP 32 bit card on my Photosmart 8450 network reader appeared as a network drive in Windows Explorer. Now that I've migrated to Windows 7 64 bit I get no network drive and if I put an SD card in the drive I get a 'map' mistake of access on the display panel. It is to be expected with the built-in drivers for Win 7? If so, is there no work around?

    Hello

    Thanks for the reply and sorry for not getting back sooner. Been strongly concerned about the end.

    I just find the solution to both problems.

    1. the card reader does not accept SD - HC cards. When I put an ordinary SD it worked fine.

    2 network drive mapping could not find the printer, even if I can print to it without any problems. I had recently also changed the router and discovered that the IP assigned to the printer was within the range of IP addresses assigned by DHCP. Changed static address to + 1.  Still did not work; posted in printer address was unidentifiable. Sitched printer, pulled ethernet cable outlet, turned on, plugged the ethernet cable. Bingo! The network drive works now.

  • Problems installing photosmart b110a on Windows 7 64-bit - ERROR in the installation of the driver.

    Hello

    Maybe you can help my with installing the software driver for my B110a on my laptop Windows 7 64-bit Enterprise Edition. I downloaded the driver software of:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-82451-1&CC=de&DLC=de&LC=de&...

    I tried several times, including the Installation of HP error - Windows 7. hta guidance. In fact, I have already installed a large number of printers on the PC in my family - I've never known such a problem...

    I'm always done with a "fatal error":

    1. fatal error:

    2. error information send to HP:

    3. details / location error code:

    Any help is welcome and appreciated, since I am quite desperate in the meantime - after trial & error for more than 3 hours... ;-(

    Thanks in advance and best regards from Switzerland, Dominic

    Dominic Rihm

    [Personal information]

    Hi again,

    I found the solution and the solution here:

    "fatal error hpzprl40.exe Windows 7 D100 printer all-in-one.

    http://h30434.www3.HP.com/T5/printer-networking-and-wireless/fatal-error-on-hpzprl40-exe-Windows-7-D...

    It wasn't a specific problem of the B110! The problem is a corrupted system file which I fixed it with sfc/scannow! :-)

    Cheers!

    Dominic

  • Windows Live Essentials 2011 Setup error 0 x 80040705

    When I try to install Windows Live Essentials 2011, I am getting error 0 x 80040705.

    The source says that the problem is with the file D3DX10_42.  I am running Windows 7 64 bit.  I tried:

    • remove all older versions of Windows Live, and then reinstall Essentials 2011
    • Download a new copy of the file and replacing it in System32 and SysWOW64
    • installation of DirectX June 2010 update
    • complete installation of the version of Live Essentials 2011 instead of the web version

    .. .but I get the same error whenever I try to install.

    Anyone have any ideas?

    Hi all

    The best and 100% working solution for all problems of installation and configuration, is related to the Windows Installer database. Because it stores information about the temporary location of the packages install but it is never update itself on the second tent installation or somehow got in conflict on this subject causes such errors as:

    -The path to the installation package does not.
    -Windows cannot find the specific file.
    -Installation failed (unknown error)

    The Solution:

    Download this utility: Windows Installer Clean Up it's a free version, install it then run it, look at the list of programs and select the program that you are trying to install (in our case, select here all that starts with: Windows Live and also select Microsoft Silverlight and you can select multi using the CTRL key), then press Clean. It will take about 5 ~ 10 minutes to erase all the information stored in the database of Windows Installer, once finished you can close the tool, run the Setup program again and throw me a big "thank you!" :-)

    Shera

  • Windows 7 64 Bit update error Code 8E5E03FE

    I just bought a new PC running Windows 7 64 bit and made my first run updates of Windows very well, that everything installed OK. Then, most of the updates and everything I try they fail with "Error 8E5E03FE", help on Windows itself is absolutely useless with this problem and I tried almost EVERY solution I can find elsewhere on the internet for the same problem and have gotten nowhere.

    I tried to install the updates with a clean boot and firewall off etc which did not help at all. I also tried to download the files manually from Microsoft Download Center and every update still does not work.

    My system is BRAND NEW, so I don't understand what the cause of the errors and four updates are updates to security I want to install successfully.

    Any help anyone could offer would be appreciated.

    Once more the error code is 8E5E03FE and numbers that are not updated are:

    KB982526
    KB972270
    KB975560
    KB979482
    KB980218
    KB979099
    KB974431
    KB980408
    KB980846
    KB981793

    Thanks in advance.

    Try this-

    1. Click the Start orb, type cmd in the field search programs and files , right- click cmd.exe, and then click run as administrator. Accept the UAC prompt.
    2. At the command prompt, type the following commands and press ENTER after each one. Please include spaces as orders must be exactly as planned. You can right- click on the prompt and paste these, too:

      net stop cryptsvc
      Ren %systemroot%\system32\catroot2\edb.log *.tst
      net start cryptsvc
      output

    See if the system can update now. If it still can not, please copy & paste the last lines of 50 or more WindowsUpdate.log in your response.
    How to read the Windowsupdate.log file

    MowGreen Services update - consumer safety

  • Windows Automation api. Setup error: cannot update your XP files because the language installed is different from the update.

    Installing Win AP Automation! 3.0 to accelerate VB Express 2010.

    Warning message:

    Update for MS Wim (KB971513) Setup error

    Setup cannot update your Windows XP files because the language installed on your system is different from the update language.

    My XP language is Norwegian. The rest of my 'stuff' MS is English.


    • What you have already tried to solve the problem

    Hello

    I suggest you to check the article mentioned below.

    Error message: Setup cannot update your Windows XP files

    http://support.Microsoft.com/kb/555042

    I suggest to select the language appropriate to the download page and check if you are able to install the update on the system or not. The update that you are trying to install on the system must be of the same language as installed.

    Thanks and regards.

    Thahaseena M
    Microsoft Answers Support Engineer.
    Visit ourMicrosoft answers feedback Forum and let us know what you think.

  • HP Pavilion g4 windows 7 64 bit startup error "status: 0xc000000f.

    Hello team,

    I have HP Pavilion windows 7 64-bit g4 laptop.

    I installed android Kit and restarted my laptop. After that my laptop is not initialized.

    I am getting below error "status: 0xc000000f.

    Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

    Insert your Windows installation disc, and then restart your computer.
    Choose your language settings, and then click "Repair your computer."
    If you do not have the disk, contact your system administrator or computer manufacturer for assistance.
    Status: 0xc000000f
    Info: The boot selection failed because a required device is not accessible.

    I don't want to lose the data.

    I don't have a CD to install windows 7.

    How to solve this.

    Your help is very appreciated.

    Thank you

    Shishir

    Hello

    The first thing I would check is that the disk you created will start in another machine - just to rule out a problem with the drive itself.

    If the disc seems to be Ok, try rather to create a bootable ISO repair flash drive - an example of the kind of utility, you need is on the following link.

    http://Rufus.AKEO.IE/

    Kind regards

    DP - K

  • fatal error installation software photosmart c7250 on windows vista 32 bit

    Problem with uninstall and install the driver software print on my PC - printer is HP Photosmart while a C7250 - wireless network connection

    My printer worked for many years.  Then some of the features of the photo printing had stopped working - I think because there may have been a conflict with several on my PC HP printer drivers.  So I tried to uninstall all the HP software (via the uninstall of the window).  All successfully uninstalled except:

    C:\Program files/hp/digital imaging\esupport\hpzscr01.exe

    C:\Program files/hp/digital imaging\ocr\hpzscr01.exe

    C:\Pro...

    C:\pr...

    I could manually the files to uninstall the first 2 because I could see where they were.  But I have no idea about the other 2 given that the error did not display name as you can see.  I tried to install anyway (using the HP Solution to install errors - Windows Vista).  Followed all the instructions.  Installing the latest driver/software (downloaded from the HP site) obtained in what concerns my wireless printer detection; then it gets stuck at the stage of configuration at 96% for 15 minutes - DURATION situation 07417929 error code.  Help!  I think it is because I can not uninstall these ghosts files.  does anyone have advice?

    ---------------- More INFO ---------------------

    After the above, I am able to print in the way of basic - but my HP Solution Center software and not operational.  Message when I try to open Solution Center is "no devices found habe HP."

    I have a LOG file with some PRT screens that I wish I could join this note (can not know how to do).  It can give some more errors.

    I finally solved this problem.  The solution was to perform a full system restore on my PC - returned to the factory settings.  Do windows, software updates re - load manually (including the software of pinter), manually the saved copy of data.  It seemed to work.  So everything comes into conflict that was on my PC was a bit too complex to adhust without having to do this VERY long process.

  • HP Photosmart premium c310, Windows 7 (64 bit) series will not work afterit is turned off and then on again

    I have photosmart all-in-one c310 printer and whenever we have a power outage, the printer will not print at startup power upward. I have spend hours trying to download drivers or updates and check the printer that says it's fine and the computer that says it can't find the driver. The last 2 times I finally got running again, but I did something different every time and I don't remember what it was. I just spent 2 hours on a hamster wheel keeps back me for a download, after you download it twice, I finally understood was the SAME download (the 3rd time I was directed here) and the printer STILL does not work. I'm pulling my hair out and I'm about to throw this worthless piece of scrap metal by the window. Help!

    Are you connected wireless? If so, you will need to reconnect the printer to the network of the SCW wireless on the printer itself. When you have power, he can hit just the printer off of the network from the router and just reconnect.

  • Photosmart 1215 with Windows 7 64 bit - Windows Update doesn't help not

    I read the other posts on how to install a driver for Photosmart 1215 by using Windows Update.  His does not work for me.  990c does not appear as another pilot.  If try just plugging in the printer and allowing Windows Update to find one that works, it may not.  The photosmart 1215 appears as an icon in devices and printers, but is in the section "unknown."  If its attached... but not as a printer.

    Apology.  It does not work.  Read the instructions carefully......

    http://support.HP.com/us-en/document/c01796821

    Thank you

    Ian

  • CF9 Windows 7 (32-bit) Setup Wizard Timeout

    CF8 works very well on my netbook Lenovo S10 - 2 as well on XP and now Windows 7. (Follow previously axes and re-axes instructions for IIS and Vista settings religiously). Pretty snappy performance actually on the 2 GB of RAM. Run Apache on XP and uses the latest IIS 7.

    CF9 almost works. Install goes very well, CF rises. However, post-installation Setup Assistant takes the admin login details and then consitently to expire. Extending the timeout via a parameter URL doesn't help; the thing is indeed mounted, do not use any what CPU, so it doesn't seem to be a performance problem.

    I tried several times; CF9 installation on a fresh copy of the operating system. On CF8. After uninstalling CF8. On itself. Same result.

    Has anyone else seen this phenomenon? Perhaps known issue?

    Yes, I know it is not "supported", but with Windows 7 to come like gang-busters, the developer edition will have to be at least.

    I try it with Apache, just for completeness. If I do, I'll post the results.

    I've yet to try Win 7, but based on where in the cycle of installation it is suspended, I'd say it's suspended installation of the ODBC function. Install ColdFusion without the ODBC function and see if it works. If it does and you need ODBC (and I can't imagine why Joe Developer needs), try to run the ODBC installation program manually.

  • Printer e-all-in-one PHOTOSMART 6510. Windows 7 64-bit.

    Printer will not the photo tray pick up. Print screen set at 4 x 6.

    Hi bpond321,

    What application program you are trying to print photos from?

    Follow the steps below in your printing application

    1. click on file in the upper left corner of the application (step 1)

    2. click on print (step 2)

    3. ensure that the Photosmart 6510 is the selected printer and click on Preferences (step 3)

    4. click on the drop down menu arrow on the paper size to select 4 x 6. This should change the paper Source for the Photo tray. If it does not change, you will need to select the Photo tray. (Step 4).

    5. click OK in the screen printing Preferences and then click on print in the screenshot.

    Let me know if this helps solve the problem?

  • Software installation problem driver for HP Photosmart B110 on Windows 7 64 bit

    I recently acquired a series of HP Photosmart B110, I tried several times to connect to my PC. I tried to download your software but if only reach "applying updates" in the first section of the installation then appears at the stop. You can make suggestions as to what could be the problem?

    Hello

    Follow the insntallation again to agree licensing stage.

    Click on the link 2 - using the Internet connection settings and select No, thank you for the botht of listed options.

    Confirm the changes, accept the terms and continue the installation which should go further than the step now.

    Shlomi

  • HP Photosmart C4680 printer Windows Vista 32 bit OS

    Print, copy and scan, but keeps recycling on every 5 minutes, as if she has just finished printing sometimes automatically will "copy Mode" and like, even analyzed just sitting idle. Damage has been done by not following good paper, methods of interference.

    Hi TedF,

    You may consult the following link which deals with topics of paper jam.  Click here  I recommend that you follow all the steps in order to ensure that all areas of the printer have been erased.  A flashlight can be very useful.

    If this is not enough, you could try to do a complete Reset of the Semi.  If successful, this reset the default printer and clear the memory.  If the printer was on a wireless network, it should be removed and would need to be reconnected.  If you want to try it, I can send the steps in a private message to your Forums HP in-box.  I need you agree to not post the stages.  Let me know what you decide.

  • error ox805d1309 and 2670; FM-ketwords - cm.c it's Hp photosmart 2710 using windows vista 32 bit?

    I keep REC error ox805d1309 and 2670; FM-ketwords - cm.c what do mean and I also get carrage jamed error reports but not crowded?

    Hello Louisinplano54,

    Generally errors such as the one you receive can be solved by simply restarting the product.

    An alphanumeric Code (example: ' 0 x 'r' C2...) ") displays on the front panel when printing

    Reset the product

    1. Without turning off the product, disconnect the USB cable to the back of the product.

Maybe you are looking for

  • Excel does not recognize this file format

    I've been using excel (Office: mac 2011) for some time. All of a sudden excel opens. I'm getting different error messages such as: "Excel does not recognize this file format" and "There is a problem with the database of the Office". I use OS X EL Cap

  • Enable Hyperthreading

    I have a G3620 predator (http://www.acer.se/ac/sv/SE/content/drivers/-;24900430618;-) with an Intel Core processor i5 3350 P inside that takes care of HT and I recently updated the BIOS. So now there's no HT enable in the BIOS. Tried to Flash back to

  • HELP e280

    The player has frozen all playing a song. Keep showing the SanDisk opening screen, then screen goes gray and did the same thing again.  It seems to be stuck in a loop. I have to close it, then go back on it and it does the same thing. I took out the

  • Windows 7 and Skype

    The Skype app can be installed in a laptop with Windows 7? Help, please.

  • Could not start / run SitesExplorer / ContentServerExplorer.exe (11.1.1.8.0) on Windows 7 64 bit

    Hi allI was able to start / run SitesExplorer / ContentServerExplorer.exe (11.1.1.8.0) on Windows 7 64 biterror starting turning"This application has failed to start because its side by side configuration is incorrect. "" Please see the application e