Photosmart C4795unable to see the ssid

I have a photosmart printer C4795 who worked on my network flawlessly until last weekend.  Last weekend, I changed my wireless network settings to use wpa2 encryption.  I thought that it would be a quick configuration change and easy to put the printer on the network, but so far, I've been blocked.  The problem is when I go through the steps to install it on a wireless network, I get to the screen where it should be listing the SSID, you see, and it does not display (should show at least 4).  I manually type in the name of my wireless network, but it will fail to find and join.  I am at a loss!  I use Windows 7 and as I mentioned this printer was working fine on my network until I converted to wpa2.  How do I get this thing to 'see' my network so it can join?

I got it to work... I ended up using a Windows 7 laptop (which is actually using the wireless network; the Office I had used previously, is wired) to do a complete uninstall of the existing printer and re - install the software on the HP site.  The software then took the news of the laptop's wireless network and joined the printer.  Still don't know why it wouldn't work on my desktop, but at least it is on the network now and other computers can see and use it.

SOLVED!  (sort of)

Tags: HP Printers

Similar Questions

  • see the ssid but unable to connect to the wireless router

    I just installed a WRT160N router, I can see the ssid of the network wireless networks but cannot establish a connection with my laptop windows xp or my wify active blackberry...  Could I connect my mac laptop son with no issues... of ideas?

    Thanks for the suggestions, none of them had however.  The solution was to allow the width of the channel must be set to Auto 20 or 40 mhz, selecting only 20 mhz or individually selecting the 40 mhz would not so much my son computer macbook laptop and my IBM thinkpad to connect. But the default configuration which is set would not work. From the manual - yes I have finally checked it...  «Channel width Select Auto if you want that the router to automatically determine the width of the channel proper (20 MHz or 40 MHz) to use, or select 20 MHz only (default) If you want the router to operate Wireless-B and Wireless-G mode only.» For optimal performance, Auto is recommended. »

  • Can not see the levels of ink for PhotoSmart 3180 on Windows 7

    Can't get drivers for PhotoSmart 3180 for my Windows 7, 64-bit computer to view ink levels.  It will print, however.

    Hi stacey,

    There are 2 ways to view ink levels when using Windows 7 with a Photosmart C3180. See the link below for more details:

    http://support.HP.com/us-en/document/c01576082

    Let me know if this helps or not.

  • LWAPP access point not to advertise the SSID

    I have a 4402 WLC and LWAPP AIR-LAP1131AG-E-K9 connected to it.

    I've been struggling with the config for some time now.

    I have a laptop next to who will not see the SSID I configured it broadcast.

    I have no idea why, but I got the following errors in the log.

    APR 17 11:37:59.091 sim.c:913 SIM-3-GW_MISMATCH: MAC address of the 00:0f:f7:32:c1:80 GW received the JOIN query is different from the MAC addr 00:00 caching: 0C: 07:ac:64 of the Gw. removal of the address IP of Gw 10.45.50.97 for AP Mgr. & send ARP REQ. for resolv

    APR 17 11:37:49.080 spam_lrad.c:1107 LWAPP-3-DISC_INTF_ERR2: ignoring the discovery request received on one VLAN badly (70) on the interface mode LWAPP-L3 (1)

    I notice that the first error property intellectual GW-related, but I don't know if this is specified, and why it is inconsistent.

    I don't know what the second error means either on the VLAN evil.

    Please can someone help!

    Thank you very much

    Neil

    I saw this in HP laptops some time there and his call "LAN Switching".  By default, it is disabled on BIOS.

  • How can I change the SSID to a Photosmart C4580?

    I browsed the forum and read some articles which none still worked. I use a Mac and spin the OS of Yosemite. In the sourse of trying to get the ro printer recognize the new router I have rest the factory default, so he now tells me that the SSID is hpsetup. How can I now change that to pick up the new router SSID?

    Hey Andy,

    You can try to enter the password in the section "WPA - PSK", instead of "WEP encryption" section, to see if it will work. It won't hurt to not test.

    Here are a few screenshots from another thread with someone who has the same issue which may help:

    Photosmart C4580 spend direct USB for iMac, wireless through Time Capsule

    If try your password does not work, you can try an application called Keychain, which can be used to retrieve wireless password, just to make sure that you use the same one.

    How to manage passwords with Keychain Access

    I hope that helps you

  • Don't see the tab for the ink level estimated for Photosmart 1315 after reinstall.

    Of my Photosmart 1315 resinstall.  After graduating with a caveat that my ink level is low - I opened to the Toolbox to see ink estimated level to see if it was the color cartridge or the black print cartridge and the tab did not exist.  I have seen before.  The only tab I see now is peripheral Services.  Don't know what happened.  How do you get the back estimated ink level tab?

    Operating system is Windows XP.  I just found out what the problem is.  My computer has recently been setup so that there are 2 types of users - administrator and limited user.  I do all my work as a limited user and why am not able to see the tabs other than the Services of the unit, when I opened the box tool.  When I log in as an administrator, I am able to see all the other tabs.

  • HP Photosmart C4599 all-in-one: new router so want to put in the SSID code on printer. No screen on the printer to do. How can I do?

    Hello

    I want to print wireless.  I recently changed my router to a 4G one and a new internet provider.   I need to enter the SSID of the router to the printer code so that it can join the wireless network and connect to my MacBook Pro.  Initially when I bought the printer, I was able to connect wireless using a provided HP CD - this does not currently work with Mac OS X 10 El Capitan, even if I have loaded down the HP update drivers.  The printer does not have a screen to change the SSID directly so I guess I have to change sort through my Apple laptop.  I you'd be grateful if someone could help me

    Clonfert

    Greetings @Clonfert,

    Thank you access the Forums from HP Support for extra support! I see that you want to configure the printer on the new wireless network. I will do my best to help you with this problem.

    I have provided a few steps to set up the printer via an ad-hoc connection and then convert it into infrastructure. (your network) Since there is no HP software to run the wireless installation.

    Click the airport near the upper right corner on a Mac.

    Click on the HP printer in the list.

    It takes about 3 minutes to connect.

    Once you get a solid blue light on the printer, it is successfully connected.

    You will not be connected to your network for a bit while we set up the printer on the network.

    Print the configuration page to get the printer IPv4 address.

    Open your web browser, type the IPv4 address for the printer (Safari).

    This will load the Web built-in to the printer server.

    We can now configure the printer on the wireless network.

    Click on the networking, on the left side, click on Wireless, fill out your information for the network. (The network name SSID, set it to the infrastructure, enter your password and the encryption type)

    Apply the settings.

    Now back to the airport closest to the top right corner on a Mac and select the name of your network.

    Just add the network printer on Mac now.

    Click on the Apple.

    Click on System Preferences, click Print and scan icon, then click on the + sign, then select the printer from the list, click Add. (you may need to click the drop-down list to select the printer name to add it in)

    Test the printer.

    If this helps you to find a solution, please click on the button "accept as a Solution. If you wish, to say thank you for my effort to help, click on the 'Thumbs Up' to give me a Kudos. Please let me know the results. Good day!

  • Photosmart 8250 not recognized by my iMAC... How can I get my iMAC to 'see' the printer?

    I'm trying to connect my HP Photosmart 8250 printer to my iMAC (under Snow Leopard 10.6.4) via the USB cable. I downloaded and installed the drivers for HP printers on Apple's site, but when I go through the "Print & Fax' tile instead of '+' and then 'add printer' is not in the list of printers as if the iMAC does not see the printer...» Help please.

    Thanks for the help... Initially, I tried reseting the printing system, but has not helped.

    Ultimately after some trial and error, it seems the HP Photosmart printer is somehow 'paired' / 'connected' with my MacBook Pro. So he can register on my iMAC, you must remove first of the queue on the MBP and then it appears on the iMAC and may be included in the queue on the iMAC... even if it's just through a USB cable.

    Thank you.

  • HP Photosmart Prem 310a went offline suddenly and will not identify the SSID to run the Network Setup Wizard.

    All of a sudden the printer has gone offline a few days ago.  Went through all the diagnostics, etc. but nothing fixed.  A solution-Assistant will not work cause it will not identify the SSID of the network that he has done since it was installed (long ago).  Have tried everything I can find online, unless I don't understand or is not quite apply and still nothing.  Wireless network works with everything except the printer. I am not very computer so I do not understand most of the letter & numbers abbreviations used here.  Help.

    It may be a heat problem - radio from the printer gets flakey when it's hot.

    Finding 5 wireless networks should - Yes you have one, but your neighbors also have.

  • How can I change the SSID on my wireless printer. He has my old router ID.

    HP Photosmart Plus B 209

    Windows Vista 64-bit

    SSID was not found (I put it manually)

    I select the printer and then he said: "(imprimante sélectionnée n'est pas présent, connectez l'imprimante & réessayer)"

    Several times, I get the same message.

    But my printer will work hooked up to the USB key.

    My old router (Netgear) leaves so I bought a new.  Everything worked fine before.  Installed a new and my computer (HP laptop) worked well, went to use the printer... Finally uninstalled and installed, but would never go farthur than the above.  I don't know what to try more except that I printed the wireless network Test report and he tells me that the printer cannot find the wireless router.  I noticed that the SSID has the old name.   Also print the Page of Network Configuration of HP and see that he concluded l network, which is the new.  So, where can I change printer SSID?  I can't find where I can change it.

    Thank you

    C70

    Hello

    Please follow the link below to solve the problems on the issue.

    http://support.HP.com/us-en/document/c02731427

  • WiFi does not connect if the SSID is not broadcast.

    I've updated to Sierra this afternoon. Everything seemed fine after the update. After dinner, my MacBook Pro (retina, 15 inches, beginning 2013) would not connect to Wifi. I reduced to a few things.

    It wouldn't connect the 5 GHz n If the SSID has been hidden. If I admitted the SSID to shown, it would connect without problems. It would connect to the 2 GHz band, even with the hidden SSID.

    I did the typical SMC reset and reset the NVRAM. I deleted the files related wifi and restarted the router and the MBP. I'm obviously on now and the speed seems normal with no dropouts. I can't hide the SSID now and will continue to work until he's asleep; No dice after that without reactivation SSID broadcast.

    Any thoughts?

    See you soon,.

    Fred

    With your same Apple ID, you can register for a free developer account and start a conversation with Apple engineers. They will answer your question: Bug Reporter https://bugreport.apple.com/

  • Strangest thing: iPhones can't see the wireless network. Why not?

    Suddenly, an iPhone 5 and an iPhone 6 were not connected to the home network. I thought that the wireless router was to have a hiccup. Reset it and still no. Control a connected computer and internet. Thought that it was a wireless problem, but check the settings (I don't mess with) and they are fine. BUT, I realized my iPad is always connected to the network. IPhones don't even see the wireless network. SSID always broadcast on. I tried to enter the SSID and password manually, but iPhones say that the network does not exist. It's the strangest thing. What would make the invisible network for phones all of a sudden? Both phones are differnet OS running. One is the latest version, probably the previous version. It's a FiOS Actiontec router/router wireless. Everyone has heard of such a thing? I do not understand how it is possible...

    Try this on an iPhone. No matter which even with other iOS.

    Tap settings > general > reset > reset network settings

    You will need to enter the password for Wi - Fi.

  • 2230 N Intel Wifi adapter - cannot see the wifi signal 5 gig

    Router Belkin N750 dual-band.  For some reason, my laptop can't see 5 GHz signal.  I looked at the options of wifi card, but could not get the 5 GHz network to appear in my list of available networks.  Any ideas?  Its SSID is broadcast.

    N mode is enabled on the card, I tried broadcasting as a and n and n only.  None worked.

    Hello:

    The reason why because it is only a single card that the Intel 2230 does not see the 5.0 GHz band is band (2.4 GHz).

    Specifications of the card are on the link below.

    http://www.Intel.com/content/dam/www/public/us/en/documents/product-briefs/Centrino-wireless-n-2230-brief.PDF

  • Software JetDirect 380 X can not see the airport card in the laptop G4 PPC

    Hello

    I tried to add a customer to the airport. It's a LaserJet 1200. But the software that comes with the JetDirect tells me to install an Airport card in the laptop. Now I can join hpsetup and print to the LJ 1200. But in practice I have to disconnect from the internet and the map Airport.  So, I know the JetDirect and LaserJet 1200 work very well. I tried different settings on the airport, but nothing has really changed the software on the laptop not finding the Airport card.

    Now I have a WOW goes a Xsense MIH 130 Xrouter, then go to the Airport Express Terminal. All Mac desk top of page 933mh, 1.67 ghz powerbooks. I use OSX10.4 to 10.5.8.  I don't know if the router is the problem or if the parameter in the jetdirect should be changed to the ad-hoc to something else. Don't know how to do this. With it, do not see the map Airport, I can't do the enbedded 192.0.0.192. There are a lot of maybe if I do this or if I do this it might work. Since the configuration of the printer in the TCP/IP section page everything below the line, Config by: is not specified.

    Thanks for any advice.

    Well again I was able to get to the stage 1.6 (in 10.5.8 printing Center is not the same). I could remove the printer that was working on its own network of HP. But was unable to add a printer in 0SX 10.5. Perhaps through IP printing, but do I put as the address? It is the site of HP to get instructions on a 380 X and another printer.

    http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en & CC = US & TaskID = 115 & prodSeriesId = 29789 & prodTypeId = 18972 & prodSeriesId = 29789 & objectid = c00257796

    Maybe I should to the left of the printer, but I've changed the SSID in the jetdirect to match the network. The IP printer 192.0.0.192 or 192.0.0.193 or just use the network name it was changed to?

    To close, but I thought a few times.

  • Connection printer HP Photosmart C4500-serieis to the wireless router.

    I had to reset my router and in so doing, he has changed the SSID and I had to change the password.  My laptop is connected to the wireless router, but my HP Photosmart C4500 printer does not recognize the change. How to re - setup the printer with the new information.  I tried all the wifi settings available on the printer with no luck?

    I have run the wireless network test report and he has failed in trying to recognize the SSID

    Thank you

    Hi you two,

    I recommend you try printing HP and doctor Scan. It's a quick and easy tool that diagnoses and solves many problems of printing, scanning and connectivity. Click on the link below for more information on how to download and run the tool:

    http://goo.GL/QsIAx

Maybe you are looking for

  • need bios pwd reset for Pavilion 15-n013dx win8 halt-code 65925557

    need bios pwd reset for Pavilion 15-n013dx win8 serl # [redacted for privacy] halt-code 65925557 A used Guigou the laptop computer and the password of the bios.  I see that you have a way to run the stop code to an access code.   It's an allmost new

  • Locking installation system administrator

    I get an error message on my system administrator with setting that not only allow for the facility of my Creative Membories Storybook Creator.  I tried everything I know how to do it.  I have not all accounts for this computer - just the administrat

  • What is wake my computer sometimes in the middle of the night?

    The title says the question, with the qualification that HP destop is put to sleep every night and not wake with the movement of the mouse - a combination of keys is necessary.  But something, I suppose a regular activity, he wakes up now and then. H

  • HP Envy 17 LM125AV brightness

    My OS is Windows 7 64 bit. I don't get any error messages, but when I break my F2 or F3 buttons... nothing happens. Well well... the Sun symbol appears but the brightness isn't set in both directions. I tried to play with the Fn key (I tried Fn + F2/

  • BlackBerry software No. Deviced are associated with your blackberry ID

    Hi, I just saw this again in news, so im looking forward to search for this think (mixture of Blackberry) this one I've been waiting years finally out and I've already downloaded it today, but I have a problem here when I try to connect with my black