Photosmart C6380 - cannot delete the document removed from the print queue.

Similar Questions

• Cannot delete the print queue.

  having trouble getting the print job to leave the queue.  MSG is "suppression".  Went through all the steps from this point up to 'FIX IT'.  Help, please

  Problem with printing, you can also consider that run these tools:

  http://support.Microsoft.com/mats/printing_problems/

  It will automatically fix it.

• delete the print queue

  Cannot delete a print (QC) have tried printing cancel but document is always at the bottom.  Managed to cancel other documents, even if none print due to the print queue that does not go away!   Have Windows 8 op sys

  None of the posted solutions seem to apply or solve the problem. Any suggestions?

  Gracias!

  Hello jldelvalle,

  Download and run the HP print and Scan Doctor using the below url...

  http://support.HP.com/us-en/document/c02073861

  Kind regards
  Jabzi

  Help the community by marking this post.
  Your question has been answered? Mark it as a accepted Solution!
  See a great post? Give it a Bravo!
  I work for HP

• all-in-one Officejet 4215: cannot clear the printer queue in Windows 8.1

  (Sorry if I am double-posting.  "I'm familiar with the operation of the forums.)

  I have a new computer with windows 8.1 and a HP officejet 4215.  I followed the HP instructions to install the downloaded software of the printer and it says to test the printing: pqtestpage.png - it is now stuck in the print queue and will not erase, if it says it is deleting.  I tried to fix it and he just keeps showing me the same problem.  Can anyone help (I desperately need to do my taxes.)  Thank you.

  Take a look at this link from HP.

• Photosmart 6520: Cannot delete the queue of print 6520/Mac OS 10

  I have accidengally loaded a bunch of pictures in the queue for the printer.  I don't know how to delete it.  I've never had the need to do this before with this computer & printer.  I can not print anything else, until I get out them.

  When the printer starts print I press the little red X to cancel.  Cancels, it then goes to the next.  When I have a clear, that one out of the queue?

  Hey @SandraPDX,

  Welcome to the Forums of HP Support!

  I see that you have some problems with some print jobs stuck in your queue on your computer Mac OSX 10.11. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. If your printer is connected to your Mac via a USB cable, remove it.
  2. Close any programs you have open.
  3. Click on your Apple icon, system preferences and printers and Scanners.
  4. Hold down the CTRL key and click the icon of your printer on the left.
  5. Click on reset printing system.

  Now, if you removed the USB cable, plug it. Otherwise:

  1. Click the more in the lower left corner.
  2. Select your printer from the list.
  3. Click the check box next to and select your printer from the list.
  4. Click on Add.

  Please let me know the results after following the above. If you have disabled the queue, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Cannot delete the printer from the "printers".

  OfficeJet 6500 a Plus.  Connected by cable to the xp machine.  Has been used in wireless mode successfully for more than a year of a machine Win 8. Some how it did not work, but I could not remove the window 'printer '. I had to download and reload the driver to use the printer.  But I can not yet remove the printer "old."   The new printer is named "HP Officejet 6500 E710n-z (network).  The old printer is called "HP7F8C60 (HP Officejet 6500 E710n-z). Can't use it or remove it. Thank you.

  Thank you for your quick response.  I could just delete it by clicking on delete.  I went through the following sequence messy and finally had success.

  I have a right-click on properties and tried each element. I got error on each of them, messages which are the most common response (80%), "printer can not be deleted. Double check the name, and make sure that the printer is connected to the network'.» Sometimes, I would get an error code. (Mentally I was not ready to dig that right now.)

  I could not change the name, or connect to any network. I tried for a half hour and failed several times on each of the elements. Then I clicked on 'Shortened' again (I don't know why!). This time, it reduces the number of points on the 'properties' of 10 points to 5 or 6. The item "Refresh" remained. I clicked "Refresh", and the printer has disappeared! I do not remember the sequence, or how many times I tried each item, but I have to hit the right combination and when, because the wrong printer icon has disappeared, and the good printer works.  Thanks for everyone's interest and help.

• Error: Access is denied, cannot delete the printer and also impossible to install programs

  Original title: access is denied cannot remove the device

  my Canon MX340 printer worked fine until the scanner stopped working advises by canon for uninstall programs / drivers and icon / as asked today did nothing working and used to install programs / drivers and can not remove the icon from the Control Panel, access is denied. Clues

  THX

  Hi Tony,.

  Please help me with the following information pricing to this question:

  1 is your computer and the printer connected to a network or domain?

  2 are logged in as an administrator on the computer?

  3. What are the programs that you are not able to install on your computer and provide also us whne exact error that you are trying to install programs?

  I suggest you refer to the suggestion provided by Waseemulla Shariff said on March 17, 2012 in the following link:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/i-can-not-delete-a-printer-from-devices-and/c0d72c68-0387-45ff-b47d-38318b2090b5

  Once you remove the printer successfully, you try to install the printer drivers from your printer manufacturer's website and check the functionality. Consult the following link:

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mx_series/pixma_mx340#DriversAndSoftware

  If you are not able to install any program on your computer, I suggest refer you suggestions provided by Sandeep Dsouza said on June 13, 2012 in the following link:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/access-is-denied-unable-to-remove-device-HP/1a45f1dd-ba47-47af-90E7-00310a988fcb

  Please answer us on the State of the question to help you further.

• HP Photosmart 5520: cannot find the printer

  Until last night I only had intermittent problems, using the scan on HP Photosmart 5520 function.  Then all of a sudden not analyze or print work - message there.  MacAir displays the RED DOT printer offline, by default.  The printer has remained non-connected.  I restarted MacAir.  I have turned off HP 5520, unplugged the wire to plug in a normal machine (of an extension of protection against overvoltages).  On reboot I have always run.  I then tried wireless live - without success.  Then, I removed the 5520 HP of the MacAir intending to reinstall.  To attempt to reinstall Mac Air is unable to find a printer.  The HP 5520 wireless network test results show no problem.

  Please notify.

  Problem solved.

  I turned Mac Air, printer and router off and restarts.  It worked.  The problem was the router!

• Cannot delete the printer in Dell dimension 3000 XP Home Edition 32 bit race.

  Original title: have dell dimension 3000 with xp home 32-bit edition.

  have 3 old printers in Control Panel I can't remove... mike

  Hello

  1. what happens when you try to delete the printers?

  2. do you get an error message?

  3 are logged as administrator?

  I suggest you to start the computer in safe mode , and then try to delete the printers.

  To start the computer in safe mode

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Hope this helps and let us know if you need more assistance.

• HP Photosmart B109: cannot connect the printer to the wireless network

  I have some setting wrong my printer for wireless printing. It has worked well in the past, but with my new macbook air - this isn't.

  I can't access the function where to add the printer to the wireless network (my router does not support WPS so his password WPA).

  I remember setting this up on a PC - easy with the driver provided by HP, but on the Mac, the configuration tool does not appear to be a function where I add the printer to the wireless network - and HP did not provide a driver, because it is supposed to work with the mac built-in software.

  The manual says only: "follow the instructions on the screen", but the printer does not have instructions on how to connect - on-screen tests, only that it is connected...

  Anyone who knows how to add the printer to a wireless network?

  Hello @Joahkim!

  Welcome to the HP community!

  I understand that you have a problem to set up all-in-one printer wireless HP Photosmart (B109n) with your new MacBook Air OS x 10.10. I want to help you with this.

  Have you changed your router or your password since the MacBook Air? If this is not the case, your printer can still be connected to the network and the trickiest part of that place will be done for us already.

  We will print a Network Configuration report to see if it is connected:

  • On the Control Panel, press the button next to Scan. The Scan/Wireless menu.

• Cannot print with hp psc 1350. Tried to delete the print queue and it just says: "delete."

  I tried to delete the queue for hours.  He says only: "delete."

  Hi Richard,

  You're probably on the right track. Try this:
  Type CMD in the search bar (startmenu) and right click on cmd.exe in the results. Now, click Run as administrator. At the opening of the CMD screen type:
  net stop spooler
  Then type:

  del/f C:\windows\system32\spool\printers\*.*

  And finally type:
  net start spooler
  (forgive me for stating a truism, but all three lines must be followed by an entry :)
  If you encounter this more then once, then you could save this in a batch file so you can just double-click the file to run the routine. That's how.
  Open Notepad and copy and paste below into Notepad.

  net stop spooler

  del/f C:\windows\system32\spool\printers\*.*
  net start spooler
  Now, save it as a .bat file.
  Must be run ad administrator when used.
  Good luck and we keep abreast.
  Sebastian

• Cannot clear the print queue

  I have the HP Photosmart all-in-One Printer C308g and tried to print a document yesterday evening.  It was the answer.  Then I tried to erase the doc and he said "deletion" - which was at 23:32 (EST) last night.  Since this same minute (11 a.m., EST) the doc shows again that "suppression".  I tried several times to cancel the doc.  I even off the printer, unplug the unit and still nothing.  I closed on my laptop then restarted it and tried to print again, but the original work was still in the queue.  Please if anyone has an answer to my dilemma, I would greatly appreciate your help.

  Hello

  In Control Panel, open administrative tools and select abuse.  Scroll down to the print spooler service, right click and select Properties, then click the Stop button.  Now search for C:\Windows\System32\Spool\PRINTERS, then delete the work inside this folder - you may need to click a command prompt to get the authority to open the PRINTERS folder.

  Restart the computer and you should find that the document has been deleted.

  Kind regards

  DP - K

• 5610 cannot clear the print queue, will not print

  Windows 7

  Works very well, then work has been "caught" in the queue. I can't print and I can't delete the job.

  Windows troubleshooting tool said he found a print job in the queue that prevents other print jobs and that fixed the problem, but it has not fixed the problem. If I run againî, I get the same message. Diagnosis seems correct, but just what he thinks he's doing to solve the problem does not work.

  I tried the printer doctor, but even if she sees the printer it does not move to fashion, we're going to fix things.

  Manually, I went to "Cancel all Documets" but that the command was not enabled even if the printer displays the items in its queue.

  I went on the ' record of spooling "in the System 32 directory and it was empty.

  Thanks for your reply. I had who tried once or twice before posting and it has not fixed the problem.

  What I didn't know (and did not appear in the online resources I checked) that the document was in the C:\Windows\System32\spool\PRINTERS directory on ANOTHER computer - hosting the network printer.  Once I found that crime files it I deleted the manually and solved the problem.

• Cannot delete the printer driver

  Hello

  I tried all the options in this thread... .no joy.

  I am running Windows 7 and I want remove driver for my printer.

  System say it is to use and cannot be deleted.

  I am the only user on this computer.

  Help, please.

  Hello

  Thanks for posting your question in the Microsoft Community.

  You seem to have a problem with the removal of your computer printer driver. Check out these links, many users have confirmed that they were able to solve the problem by returning the suggestions mentioned in the following links:

  I want to remove/erase/print driver to Windows 7 and can't find any documentation.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/i-want-to-removedelete-PrinterDriver-from-Windows/6700d817-cfb7-4D94-904e-25bc8f435c7f

  Cannot remove a printer

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/cant-remove-a-printer/7017fe93-621a-4f58-aa47-f70968e40723

  Hope that this helps, please let us know if you need further assistance.

• Under XP, cannot delete a document located in the print queue

  Cannot delete a document in Quebec to print

  now I can't print other documents

  The best way is to stop the spooler, delete the queue and restart the spooler:

  Open a run window (Windows Logo key + R), type cmd and press ENTER. Now type these commands, which are in uppercase for clarity only, also note the spaces in the commands:

  NET STOP SPOOLER and press enter

  DEL %SYSTEMROOT%\SYSTEM32\SPOOL\PRINTERS\*.* and press enter

  NET START SPOOLER and press enter

  EXIT and press enter