Photosmart c7180 all in a printing problem

Similar Questions

• Photosmart C4400 all-in-one printing problem

  My C4400 faithful is not print properly, don't give me indications of levels of low ink and Solution Center says it is not connected. I have replaced the ink (black) cartridge, but still only get a gray print, lineage. I tried alignment heads and cleaning but no luck. Can someone advise me please?

  Hello

  If I understand correctly, the page is faded and has a streaks on the print, when you try to print from HP Photosmart C4400.

  Kindly click on the following link to fix the problem.

  http://support.HP.com/us-en/document/c01004653

  Although I am an employee of HP, I speak for myself and not for HP.

  -Say 'Thank you' by clicking on the star of congratulations in the post helped you.
  -Please indicate the position that solved your problem as "accepted Solution".

  Kind regards

  Vijay

• HP PHOTOSMART C7180 ALL-IN-ONE - PRINTER ERROR: 0XC18A0106

  Help! I get an error message on my printer: ink system failure. Ink system has failed.

  I don't understand, all white women are valid. What can I do? Thnak you for your help. Florence

  Hi, thanks a lot for your advice. In fact, it's excately what I did. I found the link (if any), followed the steps and indeed decided to call a repair service, so go see. Thank you very much.

• Problem with the HP Photosmart C7280 all-in-one printing. Ink system failure could not copy-

  I'm having a problem on my HP Photosmart C7280 all-in-one printing. The following message appears, this is what came on the screen of the printer: ink system failure has not not able to copy, receive faxes or print. Refer to the documentation for the printer error O.cl9a0007.

  Does anyone have any suggestions?

  Hey Spider! First of all welcome on the forum.

  I recommend to remove all ink cartridges, disconnect the USB cable from the computer that connects to the printer and then turn off the printer completely by unplugging the power cord. Then, restart your computer. Turn on the printer but leave that he disconnected from the computer. After that he ended his power over the cycle forward and reinsert the ink cartridges in the printer and make sure their seat correctly.

  After you have all the cartridges in the printer correctly, then connect it to the computer. See if that fixes the problem. If not post back with no results.

  Thank you

  SeanS

• Problem with the installation of the solution Center for a HP Photosmart Premium all-in-one printer - C309g

  Hi people,

  I searched many threads and found some tips to remedy this, tried and had no chance.

  I am running Windows 7.  All updates are underway.  When I bought the printer, I installed the software (on Windows 7 OS) from the disc and everything was fine.  Fast forward a year and Solution Center has stopped working.

  Uninstalled all HP software to reinstall.  I could only reinstall HP Update.  I was able to load the basic print and scan drivers, but not following any software, including solutions Center.  Installation stops abruptly after "install updates".

  I even downloaded and tried "PS_AIO_06_C309g-m_USW_Full_Win_enu_140_175" and got the same result as the original installation disc.

  What can I do with my printer (HP Photosmart Premium all-in-One Printer - C309g)?

  Thank you

  Alex

   

  Screenshot of the update section:

  

  

• HP Photosmart 5520 All in One printer cancels an order of copy of the glass

  HP Photosmart 5520 All in One printer & HP Pavilion dm1 Notebook PC

  I put a document on the glass of the printer to make a copy. The command is recognized, but cancelled immediately. The first two attempts were given a bit of text/photo about 1 centimeter.

  I used the doctor scanning HP and installed my printer again, but that has not helped.

  RodeDraak

  Hi RodeDraak,

  Given that the problem occurs when you run a copy, I hope that the problem is the printer hardware not the software on the computer.

  You have the printer connected directly to a wall outlet or is this a surge protector or power bar? Even if you have used a surge protector/power bar this whole time and you feel that this is not the case, please connect to a wall outlet so that we can eliminate the source of energy as the primary cause.

  Issues when connected to an uninterruptible power supply/Strip/surge protector power

  In this document, you will see,

  QUESTION:

  Questions or problems may arise when a HP LaserJet printer is connected to a UPS (UPS), a power strip or a surge protector

• Photosmart e-All-in-One Printe: Photosmart e-all-in-one - D110a does not print text or Doc file

  Until that number today printing problems.

  Now can't print from Word or any text file.

  All other OK.

  Uninstalled and reinstalled SW.

  Problem remains.

  Word files and text printed in WHITE.

  All others are OK.

  Hey @Clark_Stillman,

  I understand that when you print from your Windows 8.1 computer to your HP Photosmart e-all-in-one printer D110a print jobs are coming in white. I would like to help you today with this printing problem. When you print from your computer, some files are sent to your printer as "image" files If your printer 'think' it prints an image, color ink may be used to enrich or to 'do' the dark. This can be misleading because your machine can really be confronted a black ink, problem of print, but you may think that your machine works great as always black appears in print. While in reality, it's just the ink to mix color to black. Therefore, at the beginning troubleshooting I'll have print you a standalone report diagnosis on the quality of your printer. This report will help us determine if this printing of the blank page problem is caused by your printers ink system or your computer. Can I please you follow the steps below.

  How to print a report of quality diagnostic:

  1. Load plain white paper in the input tray.
  2. Tap the button of the ATM () next to the icon of configuration () in the lower left corner of the control panel.
  3. Press arrow right () and select Tools, and then tap OK.
  4. Press arrow right () to select Print Quality Report, then tap OK. The printer prints the report.

  

  • If this report prints perfectly: Only the blank page printing problem isn't be caused by your printer. On the contrary, there may be a driver or a conflicts between your computer and your HP Photosmart camera setting. Can I have it please click here to download and run the HP print and scan of the doctor tool. Once the tool downloads, please run the tool to the "difficulty of printing." If connection, software or driver conflicts turns out that the HP print and scan of the doctor tool will attempt to resolve these conflicts for you. Once the tool has completed please test printing from your computer.
  • If this report does not print correctly:  That the problem you are experiencing is caused by the printing of your printer system. To solve this problem of print quality can I please have you click here to access the appropriate troubleshooting steps. Once the support document opens please run through the Solution, one five, six Solution and seven. This includes all sub-steps under the listed Solutions. Once completed the print quality troubleshooting steps, please try to print to see if the problem is now resolved.

  Please reply to this message with the result of your troubleshooting. You can also click thethumbs up' ' icon below to say "thanks for the help!" I look forward to hear from you!

• Photosmart C7280 all in one printer keeps giving me expired ink cartridge warning

  My Photosmart C7280 all in one printer Guard giving me expired ink cartridge warning.  The cartridge has expired, but I want to continue to use it as it still has ink.  Is it possible to turn off these warnings to be boring?  I can't print until I have to recognize them!

  @ CoolBreeze202 - I'm sorry that you are having this problem with the ink cartridges and the ink expiration error message.  You can try to clean the contacts on the cartridge and the contacts inside the machine to ensure that built up on the parts are not the source of the error message. Pages 163 and 164 of the user manual will show a manual cleanup process.

  I would also do a hard reset to the printer to try to clear the error message and return the printer to a known working state. No user settings are lost with a hard reset.  Here is a link that will show you how to do a hard reset on this machine.

• Photosmart C8180 All-in-One printer that turns off completely in the middle of printing.

  I have a Photosmart C8180 All-in-One printer that powers completely in the middle of printing, wasting time, paper and ink. It restarts also sometimes more and more and more and sometimes it stops and all the lights blink quickly, show an on-screen error code. During these periods, the power button seems useless. I use the printer with a HP Pavilion dv7 laptop running Windows Vista and an HP / Compaq Presario Windows XP.

  When the C8180 works correctly, it's great. But I can't allow myself to be play roulette of the printer. Help, please. Thank you.

  Thanks to kkcb9395 for your help.

  Unfortunately, I have not found a solution to fix my HP C8180. The 800 number only referred me to another number (866-234-1377) where someone in India tried to sell me a phone support or a new printer. Phone support will not fix a burned capacitor and the new printers HP scan slides. Not to mention the $100. new ink I'll have to eat if I can't solve this problem.

  For anyone who has followed this thread and interested in your own C8180 setting here is a link to a parts list.
  http://www.partshere.com/hppartslist/hpparts.asp?part=L2526A
  If you find a repair manual, let me know.

  I am a customer of HP for HP CEO and longtime who think they have the customer service thing down, I'm on my way to buy an Epson.
  Thanks again for your time.

• Cannot install HP Photosmart C6380 all-in-One Printer

  Original title: HP Photosmart C6380 all-in-One Printer, it will not be installed in the computer disk or web site

  None of the things I have tried will allow programs to download and when I go to detect does not detect the printer at all so anything that I want to use this for is not good and I about ready to kill hp all to gether

  Hello

  1. who is the operating system installed on the computer?
  2. have you checked if the HP printer is compatible with the version of the operating system that you are using?
  3. do you get an error message when you try to install the driver?
  4. what all troubleshooting have you tried?

  If you use Windows 7, follow these methods.

  Method 1: You can also run the fixit of material.

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2: in the Windows printer problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  For more information, see these articles:

  Install a printer
  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer
   
  Find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  Please provide us with more information on question help you also.

• Photosmart 4700 all in one print but not scan

  My photosmart c4740 (all-in-one) printer will print but not scan

  Hi Donpaladino,

  1. What is the installed operating system on your computer?

  2. what happens when you try to scan documents?

  3. you receive an error message?

  I suggest you to follow the steps and check if it helps.

  Follow the steps in the link and check if that helps.

  HP Multifunction printers - I can't scan in Windows using the HP software

  If the problem persists, you can also check out the links and check if it helps.

  Scan and send (e-mail, send to folder, digital transmission, etc.)

• HP PHOTOSMART 3210XI ALL IN ONE: printer says paper size or type is incorrect when you print an envelope from Word

  Hello

  I've had this printer for years & were able to print my envelopes in Word without problem. Today, I tried to print an envelope without result. The printer keeps giving me (type and paper size is incorrect). I have not won the printer & reinstalled. Still no change. Any ideas?

  Thank you

  Dear AIRASSAULT18B,

  Please follo the steps in this document:

  http://support.HP.com/us-en/product/HP-Photosmart-3200-all-in-one-printer-series/439599/model/439603/document/c01824353/

  I hope you find it useful.

  Greetings.

  * I am not an employee of HP, my work is voluntary.

  If this answer was helpful and clarify or solve your problem, please mark the topic as resolved and click on my next star to indicate a kudo, thank you.

• HP Photosmart C4150 all-in-One printer/scanner/copier - the file you specified does not contain a compatible software driver for your device.

  I'm about to pull out my hair!

  My HP Photosmart C4150 all-in-One printer/scanner/copier will SCANNER is no longer.  I uninstalled the printer in the hope of re - install and fix the problem, but now I can't re-install.  He tells me I'm the operating system (Windows Vista - 64 bit OS) is not compatible.
  I remember that I kept getting error messages when Microsoft Updates running on my computer and I followed some "fix" for the error to go away in a few months.  I think I should have done something to mess up my driver?
  I'm not computer savvy so I hope someone out there can help me get my printer, re-installed and the scan option to work again.
  It seems to me have tried every download from the HP Web site, and nothing seems to help!

  Hello

  1 did you change your computer, after which the issue started?
  2. are you connected to a domain?
  3. have you downloaded the correct driver version?

  I would recommend that you download the correct driver (Vista 64-bit) from this link and check if that helps.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=1832919

• scanner doesn't work now on an hp photosmart c7180 all in one solution Center will not come on i', running on vista

  My scanner used to work on my vista machine, now it does not work. When you try to open the center of solutions for my photosmart c7180 all in one i get an unrecognized message just after a momentary flash of the starting solution Center screen.

  Hello

  What is the complete error message you get?

  Follow the steps below and check if that helps.

  Method 1: Troubleshoot scanning.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-scanning-problems

  Method 2: I suggest you install drivers for HP photosmart c7180 all in one manually from the manufacturer's Web site.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=1153754&

  See also: messages of error & lights.

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=2697&tmp_task=solveCategory&cc=us&DLC=en&LC=en&product=1153754

• HP Photosmart Plus all-in-One Printer series - B209a

  Hello

  I have a problem with my HP Photosmart Plus all-in-One Printer series - B209a printer.

  It prints a picture by using too much magenta.

  When starting the printer, I got a message saying that I had to replace the magenta toner with a new one. I did as instructed. I printed a new document, but it came out in magenta.

  Even if the other cartridges were not empty and yet I replaced with new ones, thinking that maybe the ink dries up because I have not used the printer for a few months now. I used all original HP XL cartridges.  Subsequently, I printed testpages 5 before you print my picture.

  The printer uses all colors now, but it uses too much magenta to print my photo.

  I used the printer for several years now and never had this problem before.

  Is this a problem that can be solved?

  Troubleshooting steps described in this document can help solve the problem.  Be sure to check the vents to make sure that they are not plugged.