Photosmart C8180 All-in-One printer that turns off completely in the middle of printing.

Similar Questions

• HP Photosmart C8180 All-in-one Printer

  Hello

  I have a blue screen on my HP Photosmart C8180 All-in-one printer with a code of B3D3F8A8. HP Tech indicate that my printer is obsolete, and I need to replace. nobody there knows not what says this message and if I need to replace my printer?

  Thanks for the help.

  Try of the reset the printer as shown in this page.  Unfortunately, the error codes are not documented, if reseting the printer as described on this page is not enough you will probably need a new printer.

• HP Photosmart C8180 All-in-One printer works is not on the desktop (Windows XP). Works on laptops.

  HP Photosmart C8180 All-in-One printer has suddenly stopped working on my desktop (Windows XP). When I try to print, it just says: error and blocks the QC. I finally have to cancel and delete. It's as if the driver was uninstalled itself. I tried to reinstall with the original disc. However, it will not work and only says I have a newer version already installed on my computer. There are several products from HP on my add/REMOVE list. I tried to uninstall and reinstall. I hit the uninstall, it only flashes, but never uninstalls. Due to the fact that I had a previous HP printer on my computer before buying it, I thought that it can receive signals confused. How can I delete all Hp software and start again? BTW, this printer will work on all laptops in the House, who are also Windows XP.

  Revo uninstaller allows you to uninstall the s/w

• How to set up printing wireless Photosmart C8180 All-in-one printer.

  My os is Windows 7 64 bit.

  I want to make my printer wireless.  I had it connected to a USB port and after disconnecting I do not know what com to use.

  The easiest way is to connect your printer to your router with an Ethernet cable.  If this is not possible, you can create a wireless connection to the router.  On the front of the printer: Setup > network > Wireless Setup Wizard.

  Once the printer is connected to your network (wired or wireless, it is indifferent), go to start > Control Panel > printers and delete all instances of the printer.  Next:

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing. Get the IP address of the printer on a wireless network Test page, printed on the menu of the network printer.
  2. click on > start > Control Panel > printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Choose No.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• My HP Photosmart C8180 All-in-One Printer does not scan the black and white film strips or slides.

  This problem occurred recently. Previously, the scanner accepted slides and strips of black and white film and scanned them without any problem. Since I've updated the OS on my iMac (I am currently using OS X 10.6.8), I contacted Applecare because I thought that it was possible that my current operating system might have some incompatibilities with the C8180. 'Expert' AppleCare then accompanied me by a uninstall/reinstall, but it has not solved the problem. AppleCare said then that the problem is no doubt HP hardware failure. I find it quite peculiar since the scanner otherwise Applecare analysis works and there is no problem with respect it print or copy.

  Hi, JAOC,.

  Your C8180 can scan slides or films fixed on the memory card.  This will allow you to test the scanning equipment.

• Photosmart e-All-in-One Printe: Photosmart e-all-in-one - D110a does not print text or Doc file

  Until that number today printing problems.

  Now can't print from Word or any text file.

  All other OK.

  Uninstalled and reinstalled SW.

  Problem remains.

  Word files and text printed in WHITE.

  All others are OK.

  Hey @Clark_Stillman,

  I understand that when you print from your Windows 8.1 computer to your HP Photosmart e-all-in-one printer D110a print jobs are coming in white. I would like to help you today with this printing problem. When you print from your computer, some files are sent to your printer as "image" files If your printer 'think' it prints an image, color ink may be used to enrich or to 'do' the dark. This can be misleading because your machine can really be confronted a black ink, problem of print, but you may think that your machine works great as always black appears in print. While in reality, it's just the ink to mix color to black. Therefore, at the beginning troubleshooting I'll have print you a standalone report diagnosis on the quality of your printer. This report will help us determine if this printing of the blank page problem is caused by your printers ink system or your computer. Can I please you follow the steps below.

  How to print a report of quality diagnostic:

  1. Load plain white paper in the input tray.
  2. Tap the button of the ATM () next to the icon of configuration () in the lower left corner of the control panel.
  3. Press arrow right () and select Tools, and then tap OK.
  4. Press arrow right () to select Print Quality Report, then tap OK. The printer prints the report.

  

  • If this report prints perfectly: Only the blank page printing problem isn't be caused by your printer. On the contrary, there may be a driver or a conflicts between your computer and your HP Photosmart camera setting. Can I have it please click here to download and run the HP print and scan of the doctor tool. Once the tool downloads, please run the tool to the "difficulty of printing." If connection, software or driver conflicts turns out that the HP print and scan of the doctor tool will attempt to resolve these conflicts for you. Once the tool has completed please test printing from your computer.
  • If this report does not print correctly:  That the problem you are experiencing is caused by the printing of your printer system. To solve this problem of print quality can I please have you click here to access the appropriate troubleshooting steps. Once the support document opens please run through the Solution, one five, six Solution and seven. This includes all sub-steps under the listed Solutions. Once completed the print quality troubleshooting steps, please try to print to see if the problem is now resolved.

  Please reply to this message with the result of your troubleshooting. You can also click thethumbs up' ' icon below to say "thanks for the help!" I look forward to hear from you!

• Photosmart C7280 all in one printer keeps giving me expired ink cartridge warning

  My Photosmart C7280 all in one printer Guard giving me expired ink cartridge warning.  The cartridge has expired, but I want to continue to use it as it still has ink.  Is it possible to turn off these warnings to be boring?  I can't print until I have to recognize them!

  @ CoolBreeze202 - I'm sorry that you are having this problem with the ink cartridges and the ink expiration error message.  You can try to clean the contacts on the cartridge and the contacts inside the machine to ensure that built up on the parts are not the source of the error message. Pages 163 and 164 of the user manual will show a manual cleanup process.

  I would also do a hard reset to the printer to try to clear the error message and return the printer to a known working state. No user settings are lost with a hard reset.  Here is a link that will show you how to do a hard reset on this machine.

• Cannot delete a HP Photosmart c8180 All In One work

  I have a job stuck in the queue on a HP Photosmart C8180 All-in-one.  My operating system on my pc is windows 7,64 bit.   I can't remove the job from the queue.

  Here's a link below that may help you solve the problem.

  http://goo.GL/u3jDE

  Also, you can restart your computer and perform a hard reset on the printer. Unplug the power cord from the back and the wall outlet. Aside for 30 seconds and reconnect.

  Let me know if this can help, thank you.

• Problem with the HP Photosmart C7280 all-in-one printing. Ink system failure could not copy-

  I'm having a problem on my HP Photosmart C7280 all-in-one printing. The following message appears, this is what came on the screen of the printer: ink system failure has not not able to copy, receive faxes or print. Refer to the documentation for the printer error O.cl9a0007.

  Does anyone have any suggestions?

  Hey Spider! First of all welcome on the forum.

  I recommend to remove all ink cartridges, disconnect the USB cable from the computer that connects to the printer and then turn off the printer completely by unplugging the power cord. Then, restart your computer. Turn on the printer but leave that he disconnected from the computer. After that he ended his power over the cycle forward and reinsert the ink cartridges in the printer and make sure their seat correctly.

  After you have all the cartridges in the printer correctly, then connect it to the computer. See if that fixes the problem. If not post back with no results.

  Thank you

  SeanS

• HP Photosmart Premium all-in-One Printer - C309g dose it supports eprinting

  dose

  All-in-one printer, HP Photosmart Premium - C309g eprinting airprinter support

  Hello

  Great question, I have attached a link below that shows what printers support missions/ePrint AirPrint.  There is another option for the HP Photosmart Premium so depending on your model, which houses the ePrint and Biz.  There is more information on this subject on the ePrint link below.

  Good luck!

  http://h10025.www1.HP.com/ewfrf/WC/searchresults?tmp_product=HP+Photosmart+Premium+All-in-One+Printer+-+C309g & Product = 3793676 & tmp_qt = ePrint & CC = US & DLC = in & LC = in & Submit=.

  

• HP Photosmart 5520 All in One printer cancels an order of copy of the glass

  HP Photosmart 5520 All in One printer & HP Pavilion dm1 Notebook PC

  I put a document on the glass of the printer to make a copy. The command is recognized, but cancelled immediately. The first two attempts were given a bit of text/photo about 1 centimeter.

  I used the doctor scanning HP and installed my printer again, but that has not helped.

  RodeDraak

  Hi RodeDraak,

  Given that the problem occurs when you run a copy, I hope that the problem is the printer hardware not the software on the computer.

  You have the printer connected directly to a wall outlet or is this a surge protector or power bar? Even if you have used a surge protector/power bar this whole time and you feel that this is not the case, please connect to a wall outlet so that we can eliminate the source of energy as the primary cause.

  Issues when connected to an uninterruptible power supply/Strip/surge protector power

  In this document, you will see,

  QUESTION:

  Questions or problems may arise when a HP LaserJet printer is connected to a UPS (UPS), a power strip or a surge protector

• Cannot install HP Photosmart C6380 all-in-One Printer

  Original title: HP Photosmart C6380 all-in-One Printer, it will not be installed in the computer disk or web site

  None of the things I have tried will allow programs to download and when I go to detect does not detect the printer at all so anything that I want to use this for is not good and I about ready to kill hp all to gether

  Hello

  1. who is the operating system installed on the computer?
  2. have you checked if the HP printer is compatible with the version of the operating system that you are using?
  3. do you get an error message when you try to install the driver?
  4. what all troubleshooting have you tried?

  If you use Windows 7, follow these methods.

  Method 1: You can also run the fixit of material.

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2: in the Windows printer problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  For more information, see these articles:

  Install a printer
  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer
   
  Find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  Please provide us with more information on question help you also.

• Photosmart 4700 all in one print but not scan

  My photosmart c4740 (all-in-one) printer will print but not scan

  Hi Donpaladino,

  1. What is the installed operating system on your computer?

  2. what happens when you try to scan documents?

  3. you receive an error message?

  I suggest you to follow the steps and check if it helps.

  Follow the steps in the link and check if that helps.

  HP Multifunction printers - I can't scan in Windows using the HP software

  If the problem persists, you can also check out the links and check if it helps.

  Scan and send (e-mail, send to folder, digital transmission, etc.)

• HP Photosmart C4280 all-in-One: HP Photosmart C4280 all-in - One Printer, Printer Wizard is lost

  After I've upgraded to Windows 10, I downloaded the HP software and re-installed my ols HP Photosmart C4280 all-in-One Printer, which works very well.  But now, I can't find a way to run wizard printer.  I want to scan a document, and there is no icon on the desktop to start the software.  Anyone know where I can find the Printer Wizard file to run in order to run this software and create a desktop icon?

  Because the Printer Wizard says that you have the software, we will check the computer again. Please type Solution Center in the box search and see if the program is displayed.

• HP Photosmart C4150 all-in-One printer/scanner/copier - the file you specified does not contain a compatible software driver for your device.

  I'm about to pull out my hair!

  My HP Photosmart C4150 all-in-One printer/scanner/copier will SCANNER is no longer.  I uninstalled the printer in the hope of re - install and fix the problem, but now I can't re-install.  He tells me I'm the operating system (Windows Vista - 64 bit OS) is not compatible.
  I remember that I kept getting error messages when Microsoft Updates running on my computer and I followed some "fix" for the error to go away in a few months.  I think I should have done something to mess up my driver?
  I'm not computer savvy so I hope someone out there can help me get my printer, re-installed and the scan option to work again.
  It seems to me have tried every download from the HP Web site, and nothing seems to help!

  Hello

  1 did you change your computer, after which the issue started?
  2. are you connected to a domain?
  3. have you downloaded the correct driver version?

  I would recommend that you download the correct driver (Vista 64-bit) from this link and check if that helps.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=1832919