Photosmart c8180 software of scan crashes

Similar Questions

• HP Photosmart C8180 All-in-One - Scan more than 1 page at a time

  Ask yourself if the C8180 Scanner can scan more than 1 page at a time, and if so how I have programs that in?

  You can select multiple items to analyze settings in the HP software.

• Photosmart C4385: Hp C4385 scanning software

  Hello

  I have the C4385 and have several years to scan HP sscan my documents. I have recently been unable to use this software because of an error message "scan cannot be performed because another program is using...".

  I uninstalled the HP software and I am forced to use printing simple & software scan. I can't find the software for scanning HP anywhere to re - install on the HP website. Where can I get this?

  If I'm forced to use the basic print & scan software how to scan multiple pages into a single document?

  Thank you

  Hello

  I'm afraid that the HP scanning application is no longer available for Lion as you can find below:

  http://support.HP.com/us-en/document/c03583741

  You can do a sucj of printing & scanning by following these steps:

  1. After pressing Scanner open, click the view details button.
  2. Type the required name and set the format to PDF.
  3. CHECK the box next to "combine in a single document.
  4. Rhythm on the next page on the scanner and click the scan button.
  5. Repeat pressing the button scan until you have finished scanning pages, the specified file will include the scanned pages.

  Kind regards

  Shlomi

• Need help with the driver 64 bit, Win 7 for Photosmart C8180

  Hello. I downloaded the 64-bit driver for Windows 7, the Photosmart C8180 All-in-one. It shows the download link, the download for 64-bit file is the same file as the 32-bit file. However, I downloaded one that says that it is for the 64-bit Windows 7, in any case. http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=3204...

  I uninstalled my printer. I clicked on my new .exe file, which was supposed to be for Windows 7, 64 bit. Installed just fine. However, when I go into Device Manager and my printer, it shows that the driver is a 32-bit. (which makes sense, since if you look at the 64-bit, or 32-bit download, both are the same file.)

  I have a program on my computer it is more precisely a 64-bit program, and it let me use the ability to scan, until my all-in-one printer has a 64-bit driver. I think HP has accidentally put even tranche under the 64-bit file as they have under the 32-bit download. Anyone come across this or know what I can do?

  Thank you!

  Honestly, I think that is what is happening, you should have the driver correct 64 bit for your printer.  Since you mentioned, that they just released the 64-bit program, it is also possible that it may be a relatively new problem which they are ignorant.

  I have two recommendations for you.

  One would be to get back in touch with them and let them know that you have installed 64-bit drivers and it may be a problem with the program.

  The only other option I can think would use the 32-bit software, although I know that you really want to use the 64-bit software.

  I'm not familiar with their program enough to know what could possibly be the cause of the Analyzer must be gray and not recognized, especially if it worked before when you use the 32-bit software.

• How to set a default value for analysis the length of the page for the HP Photosmart C8180?

  When I scan documents using the HP Solution Center software on my printer HP Photosmart C8180, the default page length always 12 inches.  While I can't change 11 inches on each scanned page, it's a big pain when scanning multi-page documents.  Is there a direct solution or work around it?  Thank you.

  When you scan a document for example, solutions Center, one of the screens that should appear, will have (depending on the exact version of Windows for wordage) a button for Advanced Document settings. There should be an option to tick to automatically crop to the document. That could clear up the white border at the bottom without having to do it manually.

  When you scan an image (or document) to file, usually the default settings save who to the original size.

  As side note, usually printers has a document feeder, will automatically manage the images/documents in the way you want, without changing the settings by default simply had to be fed physically in front of a window scan.

• Photosmart C8180 + Windows 7 Home Premium 64-bit

  After the upgrade to Windows 7 64 bit, my Photosmart C8180 prints very well.  However, the "HP Solutions Center" will not be open.  Error message: "no HP devices have been detected.  HP Solution Center will be closed. "I downloaded the new drivers and software from HP website, but that made no difference.  I also installed the recent patch.  Any suggestions?

  You mentioned that you have installed the patch, did you follow this document which includes instructions after the upgrade? :

  Resolve issues related to the status and HP Solution Center Scan product after upgrading Windows Vista to Windows 7

  http://support.HP.com/us-en/document/c01887712

  Here is why I think this SHOULD HAVE worked-
  (1) that you mentioned that you upgraded
  (2) when printing software improved Vista, Win7, there is a component that is deleted in the upgrade process.
  (3) If you aren't already on v13, it is important, you get the latest version of the software - it will also replace the missing file and you'll get the Win7 software designed for your printer.

  I would look into your question if you have tried this and it did not work.

• Photosmart C8180 All-in-One printer that turns off completely in the middle of printing.

  I have a Photosmart C8180 All-in-One printer that powers completely in the middle of printing, wasting time, paper and ink. It restarts also sometimes more and more and more and sometimes it stops and all the lights blink quickly, show an on-screen error code. During these periods, the power button seems useless. I use the printer with a HP Pavilion dv7 laptop running Windows Vista and an HP / Compaq Presario Windows XP.

  When the C8180 works correctly, it's great. But I can't allow myself to be play roulette of the printer. Help, please. Thank you.

  Thanks to kkcb9395 for your help.

  Unfortunately, I have not found a solution to fix my HP C8180. The 800 number only referred me to another number (866-234-1377) where someone in India tried to sell me a phone support or a new printer. Phone support will not fix a burned capacitor and the new printers HP scan slides. Not to mention the $100. new ink I'll have to eat if I can't solve this problem.

  For anyone who has followed this thread and interested in your own C8180 setting here is a link to a parts list.
  http://www.partshere.com/hppartslist/hpparts.asp?part=L2526A
  If you find a repair manual, let me know.

  I am a customer of HP for HP CEO and longtime who think they have the customer service thing down, I'm on my way to buy an Epson.
  Thanks again for your time.

• HP Photosmart d110a will not scan.

  HP Photosmart d110a will not scan.  The resettled drivers, checked, put off - tension, nothing works.  Using Windows 7.  Error message is ' try scan from computer or see the documentation.

  Hello smhbcd

  The current software and try to reinstall using the latest drivers from the website. The link below will take you to the page "Select your operating system". Do it and download the latest driver full features.

  Photosmart D110 software

• Fatal error during installation-HP PhotoSmart C8180 All In One

  Have tried for 4 days now to install the HP PhotoSmart software. I can't used the base drivers just due to the fact that I need the scanner software to scan photo slides to save on CDROM.

  • Windows 7 64 bit
  • USB 3.0 port
  • i5 2500 k @3. 30 ghz
  • 16 GB of RAM
  • 1 TB HARD DRIVE

  Setup reaches the end of the installation of software just before moving on to configure the noncompliance. Note: The printer is not hung in the PC, but since he told me the installer.

  

  After doing some math around my computer, I stumbled upon the question. With the HP software that requires access to Firewall window, my firewall was disabled with error code 5. Downloaded the windows FixIt for the firewall, and presto. IM now successfully installed. I do not pretend that add you in the description on old software downloads HP to have people check their firewall windows to make sure that it is running. Either by the center of the action in the bar of tasks or through the services.

  Now where can I find the Exe file for scanning to PC? Except that it's resolved.

• OfficeJet 6700 Premium e-all-in-one software limited scanning or it can be used via Photoshop?

  Hello...

  I use the HP Officejet 6700 Premium e-all-in-one Prod # CV078A on a Macintosh OS 10.6.8 macbook Pro (2.8 ghz Intel Core 2 Duo - 4 GB of DDR3 RAM).

  I try to run for the first time since that I recently bought this machine, and I'm running into some problems of quality. Digitization of works very well once I thought I had to use the utility software of HP scanning rather than access the scanner by Photoshop as I always had done before with my HP's Photosmart 2600 (I had for 5 years and more).

  The scanner HP scanning software (HP Scan v3.7.9 (59)) seems very limited.

  My questions are:

  • Is there a way to browse from Photoshop (or CS3, 4, 5 or 5.5) TWAIN instead of use the HP scanning software?

  • It is there no quality of analysis options other than a few easy turns, cultures and the very limited color correction, as well as certain preferences that allow adjustments to size/dpi of glass. What about scanning at larger percentages, Descreening and some more detailed agjustment image options?

  Thanks in advance.

  You are welcome

  As a general rule, the latest HP Scan 3 of the other less editing software options than previous versions of HP software.

  You can set the color settings by clicking the setting icon (). Cropping or rotating of the analysis can be done, but there is no option of resizing by the software.

  All image editing must be done with any photo editing software.

  Kind regards

  Shlomi

• HP Photosmart C8180

  I have a HP Photosmart C8180 All-in-one. The software is damaged and I tried to run and install new softward. It will not install.  He said, on the original shipped with Windows 2000, XP and Vista printer CD. It seems that it is NOT compatible with Windows 7 (64-bit).  What I now have to buy a new printer or y at - it a patch for my C8180? I have a Pavilion laptop DV6 Windows 7 (64) bit.

  You can download the software for Windows 7 on HP.com.  Here is the link, just select Windows 7 32 or 64 bit and download it.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3204788&LC=en&cc=us&DLC=en&lang=en&cc=us

• HP Photosmart C8180 All-in-One printer works is not on the desktop (Windows XP). Works on laptops.

  HP Photosmart C8180 All-in-One printer has suddenly stopped working on my desktop (Windows XP). When I try to print, it just says: error and blocks the QC. I finally have to cancel and delete. It's as if the driver was uninstalled itself. I tried to reinstall with the original disc. However, it will not work and only says I have a newer version already installed on my computer. There are several products from HP on my add/REMOVE list. I tried to uninstall and reinstall. I hit the uninstall, it only flashes, but never uninstalls. Due to the fact that I had a previous HP printer on my computer before buying it, I thought that it can receive signals confused. How can I delete all Hp software and start again? BTW, this printer will work on all laptops in the House, who are also Windows XP.

  Revo uninstaller allows you to uninstall the s/w

• HP Photosmart C8180 will not light

  Hello

  I have a HP PhotoSmart C8180.  I recently moved and the printer was working fine until I moved it, but once it was plugged in after the move, the printer lights not at all.  The move was only 1/2 mile so he simply sat nicely on a car for the car seat and has not been disturbed around.  I tried a second original HP power and it made no difference.

  The power light comes on and the system powers the LightScribe disc but nothing else.  Making sure power is disconnected for hours even before plugging it back in does not give any different results.  I tried to press a variety of buttons while it turn to try to force a system reset any without change as well.

  Any suggestions?

  Thank you!

  Keith

  Thank you.  I had no time to answer back previously, but in fact, this has been resolved.  I think that what ended up finding it was the small watch battery figure on the map system inside the printer, leaving all the drains of power that remained in the chips, then put the whole thing back together again.  After turning on it always came not for a few minutes and then roar back to life again.

  Thank you!

  Keith

• New Photosmart C8180 displays error code C2FF8575 out of the box.

  I bought a Photosmart C8180 a few years back but put away in a closet and never opened until today. I started to install the printer and followed the instructions, but when I plugged on feeding (a first step in the installation program), the screen started showing the error Code C2FF8575, more a point of exlemation on the front of the machine and the power button began to blink rapidly. I have insterted the cartridges in it, but it did not help. I followed a tip of troubleshooting I found on the HP site to uninstall your ink cartridges, unplug the printer for at least 60 seconds, then plug back in. There is nothing to help as well. Please help me to solve this problem and get this printer doesn't work! Thank you!

  Hi mekshp and welcome to the Forums of HP.
  
  I see that you are having errors priner. After reviewing the error code, it seems that it is a fatal error in the firmware of the printer.  I recommend you contact HP directly.  You can use this Web site for information about how to contact HP properly, based on your region: Contact HP worldwide.

  Thanks for posting on the HP Forums.

• Why my Photosmart C8180 can not see my Virgin super hub, when he sees all the other distant routers?

  I'm on Mac OS x 10.7.2. I have a blank superhub. My Photosmart C8180 will not detect the hub using the wireless Assistant, but sees other networks in the region. I tried setting that allows a fixed IP address in the range of the router. Still nothing.

  Pilots etc have been updated for Lion ffollowing as instructions on the HP site but still no luck. Can anyone help?

  Diagnostic summary reports: -.

  Radio on: PASS

  The radio work: PASS

  Cable not connected: PASS

  Network name (SSID), found; IN CASE OF FAILURE

  The six remaining diagnostic report does NOT RUN

  Record of the summary reports: -.

  Network name: NOT APPLICABLE

  Hardware address (MAC): {identified but not included here}

  IP address: NOT APPLICABLE

  Configuration source: NOT APPLICABLE

  Communication mode: INFRASTRUCTURE

  Authentication type: NOT APPLICABLE

  Encryption: NOT APPLICABLE

  The blue light above 802.11 g on the right face is on.

  The printer works properly when connected by USB, but not with the radio.

  Kind regards

  Michael

  Security mode is set to [AES] WPA2-PSK and SSID Broadcast is checked.

  ID of 5 GHz Wireless band setting

  I tried to change to auto WPA, but it has no effect. Still does not see my router.

  Printer is set up for sharing in the Mac system preferences

  Just found my own solution.

  Changed Wireless 2.4 GHz band and has appeared.

  Thank you for taking the time to answer anyway. One to save for the future, if someone else reports similar problems with blank superhub.

  Kind regards

  Mike