Photosmart D5160: d5160
3 days after printing on several CD via the box the printer stopped and upward came flashing light.
HP Solution Center gave me 'Problem of cartridge' message on the left hand (Tri Color) cartridge.
HP Print and Scan Doctor gave the same error.
Uninstall, reinstall, same problem.
Reset via a power all night... same error. Tried new cartridge. Cleaning the contacts electrical cartridge tried. The same problem.
USB power down reset and disconnected... the same problem. Therefore, the printer itself
Then begins the strangeness. A material that test using OK +
For about 10 seconds. When the cartridges Park the Red led starts flashing and the cartridge lcd error return upward. Stranger still. I tried a self-test with USB connected and immediately (within seconds) after the self-test of the printer worked perfectly and some text printed! If the printer can print. There is ink in the cartridges. But I can't use it. Any help appreciated. BTW, the test included a lot of numbers and a few "event system". Anyone know what they mean? TIA Tony Hello Gemini, Thank you for your answer and the link. First of all, I'm using remanufactured cartridges. I tried the contact cleaning steps yesterday with no effect, it's cartridges and printer contacts... yes I used water distilled. I have tried 3 different brands third without effect. Also tried to reset power off. I just gave it a try more. Still no effect and started typing this message... After a few minutes, I looked around the printer and saw the red light was not blinking and error messages that have been deleted. A test page printed from the PC worked OK! So, problem solved, thank you very much. This printer has been excellent for years and I wouldn't needlessly it's bin. I still have questions, however. Why are there the error status took so long to clear? If this is normal, then such a delay can be very confusing when troubleshooting by reversing the cartridges etc. Some errors of locking or set flags to a hard reset is required to make them disappear? I'm going to accept as a solution, I cross my fingers the question does not return as soon as I do that Tags: HP Printers Photosmart D5160 keeps restarting All of a sudden my printer keeps restaring if the USB cable is disconnected and then reconnected. I tried to reinstall the software and which appeared to install correctly, however approximately every 5 minutes this problem occurs. I have this error message in the reliability monitor Windows Installer installed the product. Product name: SF_CDA_ProductContext. Product version: 130.0.365.000. Product language: 1033. Manufacturer: Hewlett-Packard. Installation success or error status: 1603. I use a computer Dell desktop and windows 7 Home premium SP1 Hi grand-baz. Welcome to the HP Forums! I understand that your HP Photosmart D5160 continuous restart and you get a 1603 error message, and I am happy to help you with these questions! Please see the following guides: I hope these guides will help you and thanks for posting! Dear Sir. A couple of days, I installed a new desktop computer with windows 8.1. In the past, I have worked with windows XP and can print directly on my cd/dvd. But now with windows 8.1 this will not work. The printer, but works very well. Should I upgrade my Photosmart D5160 printer with new software for printing directly on my cd/dvd? Thank you for your response. I don't want to have two printers, no room enough, so I'll buy another. Can't print CD/DVD Photosmart D5160 I have a new Mac OS X version 10.6.6. I was able to print directly on CD/DVD with my old Mac, using the HP Photosmart D5160 printer and printer DVD tray. Not the same with the new Mac. HP Photosmart create Mode, I chose to create a label, select the label of CD/DVD of 5 inches, but I cannot even enter text in the text box and when I choose 'print', I simply get the wheel spinning forever and if I force quit. I checked my HP manual, online, Apple support, this forum and I still cannot find a solution to this problem. An idea / solutions out there? Thanks MB Justice and Printdoc for your help. The additional hotfix, I managed! For others who might see these messages, I would say follow Printdocs instructions in the post #4 with a change. After uninstalling your software and then reinstall your software from the original CD, following with an installation of the update to it, contained in MBJustice msg #9 of this string. Eternally grateful Photosmart D5160 with Windows 7; Unable to print on CD/DVD I installed my Photosmart D5160 on my new HPE180t. I used the "HP Photosmart and Deskjet full feature software and drivers" for Windows 7 64-bit. Before, with Windows XP and HP Photosmart first, I was able to print on a CD/DVD. Now, HP Photosmart Essential replaced HP Photosmart first, and I'm unable to print on CD/DVD. This same question was also documented on this forum, but no resolution found: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-and/Photosmart-D5160/m-p/154007/highlight/tr... I chatted with HP Technical Support online and they had me install Roxio Express Labeler for Windows Vista and run it in compatibility mode. The result was that I was able to print on a CD/DVD, but the image has been moved to the top. HP technical support said that I should buy a third-party CD/DVD printing software and they suggested call me Nero to determine what software to use. My questions: 1. is this a known problem, the fact that the D5160 impossible to print on CD/DVD with Photosmart Essential and Windows 7? 2. If someone has had this problem, what do you do to solve the problem? 3. Another option would be to buy a new HP printer that prints on CD/DVD? If so, what printer? Thank you very much Angela That's what I did to solve my problem: 1. buy a HP Photosmart D7560 h 2 use Windows Photo Viewer to print on CD/DVD Note 1: The only way to buy the HP Photosmart D7560 h through HP's through its "upgrade" program, because this printer is no longer available via the HP shopping site. Do NOT buy the D7560 h through the 'upgrade' of HP program because you will receive a refurbished printer. After talking with the resolution of HP service, they advised me to buy this printer to a retailer who sells this printer yet. I bought my new HP Photosmart D7560 h from newegg.com. Note 2: This printer (D7560 h) also uses the HP Photosmart Essential 3.5 when you use Windows 7, like the HP D5160. When I installed the EP 3.5 and only had a printer is installed (as opposed to a printer and scanner HP), the 3.5 HP allow for printing on CD/DVD via the HP Solution Center. The problem (not being able to print on CD/DVD via PE 3.5) occurred when I plugged in and installed my HP Scanjet G4050 scanner, which also uses the HP Solution Center. Note 3: I believe tha the D5160 could work with Windows 7. It may be able to print on a CD/DVD, if you do not have an another printer/scanner HP device installed on your computer. It may be able to print on a CD/DVD using the Windows Photo Viewer. Note 4: To replace the cartridges of 5 ink (XL) on the HP Photosmart D7560 h, it costs a total of $115. Let me know if you have any other questions. Bottom line... I am able to print on CD/DVD with the D7560 h on Windows 7 operating system but I don't have to use the Photo of Windows display program. Take care Angela HP Photosmart D5160 prints everything in red only My Photosmart D5160 started printing everything in red. In any document (usually, we print our business letters in black only) red. The standard Test page printed from the PROPERTIES tab is completely red, although the Windows logo in the upper right shows a hint of pink and yellow. What happened when the cartridges, color and black (genuine HP 344 and 337 respectively) were half full. There is no error message on the D5160 Billboard and the LEVELS of INK display this ink in both. There is no configuration setting I see requiring everything to be printed in red. I tried a download of the latest driver from HP site... Basic installation failed half way through. Then I uninstalled all HP software, removed the printer and tried a reinstall of the base on the site of HP driver (I have more... lost installation CD)... It seemed to work and at the end of the process, it will automatically restart the PC. When Windows came back to the top, it says the installation failed, then he collected information about the problem, sent automatically to Microsoft to see if there is a fix for this problem. He returned and downloaded a fix for the "problem"... Unfortunately, I didn't record what was the known problem. Hotfix installation failed thus leaving me with no printer at all. I ran a system restore available promptly to see if I could restore to before the problem of red (I don't remember when he did) - system restore worked and I have a printer installed again, but she still print red only. Red is now counted - so I have cartridges that have a lot of ink, but as the Red runs, I can't print anything. Anyone has any idea what the hell is wrong? Thank you p.s. I'm under Windows XP Home V2002 SP3 with all the latest Microsoft patches up-to-date. Try to print a self-test of the only printer page. Maybe it's a hardware problem with the printer itself. If you print the test page and you get the same results in RED, while this isn't your software, it has something to do with your cartridge or print head. Even so, full to halfway, you can try to replace the cartridges and see if you get the same result. If you get the same result, it will be your print head. Photosmart D5160 "incompatible print settings. Have installed my Photosmart D5160 on my new PC running Windows 7 Pro 64 bit. Just start using the printer to the new computer. PROBLEM: 1 open the HP Solution Center, select the printer, select settings, select the printer settings 2. Printing shortcuts, select "General impression of every day" and the print quality is set to 'normal '. 3. I leave the settings of the printer, then go back to the settings of the printer. The "General everyday printing" shortcut is still selected, but the print quality change DPI Maximum. 4. when I do a reset on this shortcut, the print quality goes back to normal, but then when I click OK I get the error message following pop up: -Incompatible print settings -There are one or more conflicting settings -one of the conflicting settings is: -resolution: 1200 dpi rendered text -print quality: normal QUESTION: How to resolve this conflict? I wish to have my "normal" print quality Thank you Angela RESOLUTION: 1. start / devices and printers 2. right click on the prnter icon and select 'delete device '. 3. are you sure? Yes 4 restart later 5. check that the printer icon is more listed under devices and printers 6. start / right click on computer / properties / Device Manager 7. develop "USB controllers" and check "USB printing Support" is not listed 8 disconnect the printer from the rear of the printer USB cable and the computer 9 reconnect the USB printer to the back of the printer and the computer cable 10 printer driver facilities 11 make sure that "USB printing Support" and "Series of HP Photosmart D5100" is listed under Controllers USB in Device Manager 12. check that the icon for the printer appears under devices and printers 13. now the printer settings should stay together if necessary (i.e. print quality will remain the Normal value if you selected "General everyday printing" shortcut Photosmart D5160 randomly disconnects. All of the solutions posted, followed by new ideas? Basically, the printer continues to go randomly on and off line. Even when he is online, when I click on the button "print" of the computer, the printer then goes offline! Sometimes it - if you're lucky, but the times are very rare! The printer has not been damaged or something like that and this problem started just by itself. Seems a shame to dump the printer when it actually works. I use an iMac G4 PPC running OS 10.4.11. I searched the previous posts on this problem, but none have been resolved. I have followed the steps of troubleshooting HP, reinstalled the drivers, made the 'power brains' a few times, plugged the power directly on the wall (not a surge-protected power strip) and still nothing. I changed the USB and power cables, changed the USB port plugs on, in fact, I did everything suggested. I am quite fit to using a Mac so I've done everything I can think of, such as deleting the prefs etc.. I even tried to use it with my Macbook, and it does the same thing! Any suggestions? widgets10, If you have visited the steps described in this article , it may be time to service the printer (if it isn't give the steps a shot and let us know the result). You can contact technical support at the 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number. http://www.hp.com/cgi-bin/hpsupport/index.pl - for the maintenance options. Good luck! New D5160 ink cartridges will not work My printer photosmart D5160 HP need of ink so I bought the black (98) and three color (95) and install. They have not been rewarded. I used the tool kit to see if the ink levels are detected and no cartridge is detected. Red Exclaimation of printer lite flashes. I have several times gone out cartridges, cleaned the contacts and install. I turned off the printer, waited 10-15 minutes and turned it back. Still nothing. I had this problem 2 years when I replaced the cartridges but ultimately the printer detects them. I have a problem with the cartridges I bought or is it the printert? Everything was good with printing until I became a faded print copy and decided to change the cartridge. No error message, no flashing lites. As soon as I removed the old cartridge and reinstalled - it's at the beginning of this flashing red exclaimation lite. I am running Windows XP HD on a Toshiba laptop. I hope I have provided enough information for someone who could help me. I got a solution to my problem thanks to Advanced Tech Support with HP. Did you know that the printers are defined at the regional level? Yes, indeed. USA is region 1 and region 2 is Europe. It is defined by the settings of the software. HP has kindly give me the region codes to reset my printer to region 1 USA bought German so he will accept cartridges USA version. Perhaps in the future these regions will disappear and the world community, that we all will be Preval? In any case, Bravo to the team Advanced Support HP that has therefore reactivated me. D5160 - out printed striped, even after cleaning and replacement of cartridges THE SYSTEM CONFIGURATION: 1. I bought my HP Photosmart D5160 (12/20/06) more than 3 years ago. 2. I use ink cartridges only HP (98 for black, 95 for tricolor). 3. I print photos on photo paper professional glossy inkjet. BEFORE THE PROBLEM: 1. until a few months ago, I've been printing photos without flaw with the parameters mentioned above. 2. sometimes after HP new installation of ink cartridges, a printed photo will print with streaks. To resolve this problem, I would be 'Clean the print cartridges' through the 'HP Photosmart D5100 Toolbox series' and the photos would then print flawlessly. PROBLEM: 1. beginning about two months ago, I am unable to have my photos Print flawlessly. Photos Print consistently with some scratches. I use the same paper, as I always have. I buy HP ink cartridges at the same address as I always have. 2 using the HP Photosmart D5100 series 'Toolbox', I clean the ink cartridges and make an intermediate clean, then a first. Problem remains. 3. I then cleaned the cartridges manually by the doc following HP (http://support.hp.com/us-en/document/c01711664), but the problem remains. 4. I then replaced black and the tricolor ink cartridges and the problem remains. QUESTION: It is time to buy a new printer or is there something else I can try? Thank you Angela UPDATE: After that print 10 pages on photo paper, all with streaks, I turned off the printer. The next day, I tried again and without streaks. I am considered to be research in an extended warranty for this product. FYI, for information on extended warranty services, please contact: HP Technical Support team Sales Dept at 866-234-1377 Window printing preferences Photosmart 5520 The Properties window of the printer for my D5160 late used to look something like this: By comparing the Properties window of the printer (for example, the inside Word on my Vista PC) for my new 5520 new seems very basic: This brings me to wonder if I had installed the complete driver. I installed from the CD. It seems a lot more hostile user driver D5160 who introduced many shortcuts with icons to quickly access the print speed, better printing, photo, etc. with the drop down menus to further customize the settings and the ability to save settings customized on a screen. I'm sure all the same options are there in the new driver but not too easily accessible, certainly for others less users lean back on my computer and there seems to be no way to save the custom settings. Can anyone say if this is the best I can expect, or I missed something out somewhere during the installation and there is a more user-friendly version? There has been some changes in how drivers are designed for the for the 5520 Photosmart D5160. Some of these changes have taken place for many different reasons, but one of them is that many of these options are integrated into the software normally used for printing. Many of these custom settings are in programs such as Microsoft Word and photo printing software. Instead of doubling these services and leading to conflicts of drivers, these options were left more to the software providing information for the print driver on is made on the rear part. It is the correct printing preferences screen for Photosmart HP 5520. I hope this helps. I have a Photosmart D5160 and it will not print black. Color is fine, but when you print a black-and-white document it prints nothing. The cartridges are both complete and there is no error coming. I did the test pages, but this color shows only. Any ideas? I wrote to HP and have heard nothing back. To make a call to the technology Office cost 60 p per minute. I hope someone knows the answer to save me a quid. The print head is part of the ink cartridge. If you are replacing the black cartridge will result in a fresh print head. If the black cartridge is aged one year and as the original, I guess that it is not full. One thing to check - Remove the cartridge and it spot on a damp cloth. If you do not get a high spot of ink cartridge empty is likely or obstructed. Even if the cartrdige were clogged I would expect some nozzles to work, my guess would be so empty a cartrdige. Kind regards Bob Headrick, MS MVP printing/imaging G4050 analyse, because of the acute sounds DESCRIPTION OF THE PROBLEM: 1. I have a two-year-old HP Scanjet G4050 2 up until yesterday, he analysed very well 3. as of yesterday, it does not analyze DETAILS OF THE PROBLEM: 1. click on the Scan Image using the HP Solution Center 2. click on Scan on the next window 3 scanner makes it sound normal when "Preparation for the Scan" appears on the window of scanning hp 4. then scan emits a high-pitched sound for 2 minutes 5. previously scanned is displayed on the digitization of hp window: a white screen with multi-colored short horizontal lines throughout page 6. at this stage, the scanner performs a serious noise 7. This continues until I disable scan 8 NOTE: I tried to use the "HP Scanjet Check" from the HP website, but get the error message "the analysis process was not completed successfully. SYSTEM INFORMATION: 1 HP Pavilion PU131AV / a1050y, Intel Pentium 4 CPU 3.20 GHz, 2 GB RAM, Windows XP MCE, SP3 32-bit, Nvidia GeForce 6600 2. I also have the HP Photosmart D5160, also tied to the computer via USB, so Help, please... Thanks in advance, Angela To determine if the scanner is bad, perform the following factory reset test: 1. make sure that the scanner is turned off 2. open the scanner cover to halfway 3. press and hold the "scan film" and "copy" buttons located on the top of the cover (front buttons) 4. with the lid of the scanner still halfway open, turn on the scanner 5. When you see the light inside the scanner lights up, release the two buttons ("scan film" and "copy") 6. the transport will have to move all the way from the back to the front of the scanner. If the transport moves all the way from the front to the back, then the scanner is broken Can you suggest a source for a maintenance/repair for the D5160 manual? Printer has an axel drive broke (plastic) on all pickup/power roller double roller. To get to the Assembly, it seems that the entire unit must be dismantled. I deleted all plastic trim, bevels and the Panel, but to continue any further I have to remove the two drive belts - one for the transport of print heads and the other for a glass of indexing circle that appears to control the size of police or spacing. If I remove these belts, the circle-printhead assemblies and glass re - year automatically when they are assembled or manual adjustment should be? If I can access and remove the roller of pickup/feedingstuffs having failed, and identify the part number, is there a source for these parts? Thank you Ray511 Hi Ray, We do not recommend trying to fix your printer this way. Also it is not anywhere you can get parts of this type. If you like this model of the printer, you can probably find a cheap to replace him on the line. D5160 paper jam-remove incorrect papers. now what to do? I messed up. I panicked when the page I just printed has been reduced in the printer. I caught and it went out. Now the red light blinks and there is no troubleshooting information on my CD Manual for it. Can it be fixed? The printer can be reset? I solved my problem! Incredible. I was persistent in the search for a solution and found this place... http://support.HP.com/us-en/document/c00730872 I had to RESET the printer by disconnecting the cable cord (while the printer is on and open the access cover), then disconnect the power cord from the power outlet. (it's perhaps to allow dissipation of the current in the electric transformer?) Wait 15 seconds (at least), and then reconnect the power cord to an outlet and then the power cord to the printer. Let the printer to power on and then close the access cover. All right. I have now a small note on the printer to DO NOT pull the paper from the printer if it gets 'sucked' in the printer! I am posting this here just in case someone else made the same mistake that I did. Why are cookies reloaded each time you start? I get rid of cookies (remove all, clear the cache and use private browsing), and they are all gone in tool > see all Cookies.But when I restart Firefox, the same 200 + cookies are just there again in tools > show all Cookies. Why/how they re - load t I recently got a new computer and upgraded to Firefox 8. Now, when I save an image from a website, Firefox will 'remember' and, next time I save an image, open a case at random that I saved an image in the last time I was on this site, then choose Sa HP Mini 110: Enter the current password computer Hp Mini 110 I have! I need help unlock HP MINI mi. Suddenly, he began asking for a BIOS password, even though I've never set up a. p/n: NZ777EA #AB8 CNU9304691 model #: HP Mini 110 c - 1010ET Help, please! Thank you!! I have a laptop Acer 4720 with valid product key of Vista Home Premium OEMact and COA label, my problem is the HD is broken and I need to install the new HD and then reinstall windows, but I have not all disks (was on the recovery partition which is Do it programmatically detecting bluetooth and file transfer Hi BB developers,. I need to know how to programmatically detect bluetooth and file transfer, can be done in blackberry, if there is no article or code, it will be a great help. Thank you all for your support SujithRavindran
Similar Questions
old computer: HP Pavilion PU131AV / a1050y, Intel Pentium 4 CPU 3.20 GHz, 2 GB RAM, Windows XP MCE, SP3 32-bit, Nvidia GeForce 6600
new computer: HPE-180 t, Windows 7 Pro (64 bit), Nvidia GeForce GT 220, Intel Core i7 - 930 quad-core CPU @ 2.80 GHz, 8 GB of RAM
old computer: HP Pavilion PU131AV / a1050y, Intel Pentium 4 CPU 3.20 GHz, 2 GB RAM, Windows XP MCE, SP3 32-bit, Nvidia GeForce 6600
new computer: HPE-180 t, Windows 7 Pro (64 bit), Nvidia GeForce GT 220, Intel Core i7 - 930 quad-core CPU @ 2.80 GHz, 8 GB of RAM
old computer: HP Pavilion PU131AV / a1050y, Intel Pentium 4 CPU 3.20 GHz, 2 GB RAM, Windows XP MCE, SP3 32-bit, Nvidia GeForce 6600
new computer: HPE-180 t, Windows 7 Pro (64 bit), Nvidia GeForce GT 220, Intel Core i7 - 930 quad-core CPU @ 2.80 GHz, 8 GB of RAM
old computer: HP Pavilion PU131AV / a1050y, Intel Pentium 4 CPU 3.20 GHz, 2 GB RAM, Windows XP MCE, SP3 32-bit, Nvidia GeForce 6600
new computer: HPE-180 t, Windows 7 Pro (64 bit), Nvidia GeForce GT 220, Intel Core i7 - 930 quad-core CPU @ 2.80 GHz, 8 GB of RAMMaybe you are looking for
