Photosmart D5160 with Windows 7; Unable to print on CD/DVD

Similar Questions

• Printer HP Photosmart 8750 on Windows XP, do not print within the frame.

  Printer HP Photosmart 8750 on Windows XP does not print photo correctly and cannot be adjusted manually to print in time. Printing is too high or off the coast on one side or the other. How can I fix this?

  Hello
  
  Try to download and run the doctor print and scan located here:
  
  http://support.HP.com/us-en/document/c03275041
  
  It can fix its own much and if not to give a better idea of what is happening.
  
  Good luck!

• Error code 37. I have a model CM5688E gateway with Windows Vista Home Premium. My Optiarc DVD RW AD - 7203 has enough work. How to operate again give idea? The computer is less than 2 years.

  Error code 37. I have a model CM5688 E gateway with Windows Vista Home Premium.  My Optiarc DVD RW AD - 7203 has left a couple of weeks of work.  Anyone have an idea how I can get it working again?

  Hi Sunday47,

  There are many causes of Code 39 errors:

  ·         A required device driver is missing.

  ·         A required binary file is corrupted.

  ·         There is a problem with the file I/O process.

  ·         A driver that refers to an entry point in another binary file cannot load.

  I suggest you try the following steps:

  Step 1: Run the fixit available in the link below

   

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

  If the problem persists,

  
  Step 2: Uninstall and reinstall the drivers.

   

  1. click on start and then click Control Panel.

  2. click on system and Maintenance, click System, and then click Device Manager.

  Note If Control Panel is in Classic view, double-click System and then click on Device Manager.

  3. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  4. in Device Manager, expand CD-ROM/DVD-ROM drives, right click on the device CD and DVD and then click on uninstall.

  5. When you are prompted to confirm that you want to remove the device, click OK.

  6. restart the computer.

  After the computer restarts, the drivers will be installed automatically.

  Click here for more information.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Print borderless on Photosmart B209 with Windows 8

  Hello

  I have a Photosmart B209 all-in-one I've had for a while. I plugged in my new computer Windows 8, but now I have a problem: I can no longer make prints to this printer. There was formerly a checkbox in the preferences with my old windows machine, but it seems to have disappeared with Windows 8. Can you help me to print borderless prints? Appreciate the help!

  Hi RedRidinHood,

  Welcome to the HP Forums!

  I see you are trying to do printing without margins, with your HP Photosmart B209 on Windows 8. I'm happy to help you!

  Please run the HP print and Scan Doctorand let me know what happens!

  Hope this helps and thanks for posting!

• Photosmart 1315: Execution of HP Photosmart 1315 with Windows 10

  I was able to run my Photosmart 1315 on Windows 7 using the 990c drivers.  What drivers should I use to make it work with Windows 10?

  Hey @insman1132,

  Thanks for getting back to me on this subject.

  Because the Deskjet 990c printer is not available on Windows 8, Windows 8.1 and Windows 10 the other driver being used is the Deskjet 9800 driver I have provided. Because this driver does not work, the other option would be to update this old Photosmart to a newer model which would be better suited for the latest operating systems. Due to the age of your current printer, your product may qualify for an upgrade to a new product model at a reduced price.

  If you are considering upgrading the printer, I would recommend that join you the queue of our Support technical by phone about the upgrade options.

  • HP Contact number: (888) 747-7948

  I wish you good luck going forward with this!

• I moved my printer from an xp computer to a new one with windows 7. It prints ok but I wonder

  HP Photosmart C4680

  I have used it with Windows XP and now have a new computer with Windows 7.  the person who connected just plugged and it seems to print OK but no HP locations appear on my screen such as the icons etc.  Do I have to insert the original disc and reinstall it or will be everything that does not work on Windows 7

  It worked fine after installing again.  Thank you

• Unable to print on CD/DVD printable C5380

  I just bought a Photosmart C5380 to replace my Epson sick.  Load on an iMac than 2.4 GHz with Snow Leopard and all the latest updates and drivers.  Prints and scans very well... almost.  I'm unable to printon a printable CD/DVD.  Lower the door CD/DVD and prssing OK brings up a message telling me to use the CD/DVD software to print.  But I can't find anything.  The manual I have in front of me told me I should use the software provided with the product to create and print on a CD/DVD.  I can't find anything!  I downloaded HP Photosmart studio, but that doesn't seem to work.

  Hey all,.

  When we developed the drivers and software for Snow Leopard, there were some problems getting CD/DVD printing to work.  We decided to go with the release of the software without the CD/DVD printing functionality.  In the meantime, we modified the HP Photo Studio software and got everything working in 10.6 again.

  So, what should you do?

  #1-make sure you have the latest drivers from 10.6 to your printer downloaded and installed from hp.com.

  #2-go here: ftp://ftp.hp.com/pub/united-states/pse/hp_photosmart_studio_software.dmg and download and install HP Photo Studio.

  You will now be able to print on CD/DVD by HP Photo Studio.

• HP Photosmart more B210: printer HP B210 connected to the computer with windows vista is not print documents

  Have had the above printer and computer wireless without any significant problems of printing until yesterday when I couldn't print liked anything from my computer. I disconnected the son / the power of my printer and router, waiting a few minutes and then reconnected the accounts.  Then I restarted my computer and retries impression with unsuccessful results. I then run the wireless network Test and the report does not show any problem.  Anyone have any suggestions to solve this problem.

  Thank you

  Hi @kattok001

  I see that you have had the minimum printing problem in the past, but suddenly you cannot print at all despite your efforts. I'd be happy to help you with this!

  Let's start our trip with HP print and Scan doctor. Printing HP and doctor Scan is a free utility (tool) that allows to quickly solve common printing, scanning and connectivity problems, including but not limited to:

   

• Unable to print on CD/DVD with Photosmart D5460

  I bought a Photosmart D5460 specifically to print on a CD, it used to work, now it doesn't. I get the message that this printer not print CD nonsupport, but if I leave the OPI of the CD tray tells me that I have to close it before you print it. I thought that maybe the toSnow Leopard upgrade did damage, but I installed the original software on an olderG4 under Leopard. No luck. What is a printer firmware issue?

  I use an Intell Mac running OS x 10.6.5. The pilot is 4.2, the print utility is 4.8.5 and HP studio is 9.8.1

  The problem is the oldest software installed.  It is mess up the works.  You will need to uninstall the software 10.5 using HP uninstaller, restart your Mac and then add your printer to print and fax.  For 10.6 drivers are already in the operating system.  It may ask you that there is an update, let the Mac download and install this update.  Then, download and install the HP Photo Studio's Mac OS X v 10.6 found here.

• With the help of printer HP Photosmart 6280 with Windows 8

  I recently installed a new printer driver for Windows 8 and I noticed that the front and back of my printer function doesn't seem to work.  On my old computer (Windows Vista), I had it set to print on both sides of the page automatically, but this option no longer seems to be available.  I'm doing something wrong?

  Hello
  Make sure that the automatic duplex printing option is selected:

  Enter the control panel > devices and printers.
  Right-click the printer icon, and then click printer properties.
  Click the device settings tab.
  As installed in Duplex Automatic Two-Sided accessory and then click OK to save the change.

  Automatic duplex printing should now available.

  Kind regards
  Shlomi

• I have a Photosmart B109a with Windows Vista as the operating system. I can't print any documents.

  When I go to print a document, the appropriate box comes up to a selected number of copies etc., the printer connects correctly and then sounds like it is printing. Nothing is printed in fact when the paper comes through.

  Just in case it was a fault of the printer, I reconnected it a Deskjet HP's 803C and it is the same thing. The additional mystery is that the images print perfectly. I use Microsoft Office 2010 for documents. All ideas

  Thank you for your reply and my apologies for not recognizing sooner. However, problems went much deeper when my computer crashed. Hard drive kept saying that it was full and therefore would not accept certain instructions. All now corrected with a new hard drive which has solved printing problems. Thanks again.

• Problem installing HP Photosmart C4740 with windows 8, 1

  I just bought a new Dell PHE 8700 and it came with factory setting of windows 8.0. I've upgraded to 8.1 windows and when I went to my HP Photosmart C4740 of installation for some reason any it will not recognize the printer. I have used this printer with several different versions of windows in the past with no problems. I went through every available troubleshooting and still can not the PC to recognize the printer during the installation.

  The problem is resolved. It was a bad cable. Thanks for your response

• I can't print properly on the web with a computer with Windows 7 64 gig; printing is fine from Internet Explorer

  My new HP computer with a 64-bit operating system use Windows 7 and internet pages do not print correctly. Printing is very small and parts of the page are SEPARATED. Printing works fine in Internet Explorer.

  This has happened

  Each time Firefox opened

  == I bought the new computer

  See this:
  http://KB.mozillazine.org/Problems_printing_web_pages

• Photosmart C4599 with windows XP and 7 networking

  I recently added a computer portable 64-bit windows 7 to my home wireless network connected to my hp photosmart printer.  Now when I try to print from my other computer laptop windows vista or windows xp to office, both of which printed perfectly preveiously, nor will print at all and suggest that the printer is offline.

  I tried to uninstall and reinstall the software on the computer vista laptop but no joy, infact in the setup, I have now a message that the pc and the printer are connected to different networks and lists different IP addresses?

  Can anyone help?

  Thanks for the help.

  Tried to uninstall and reinstall again (3rd time) and by some miracle it worked on my Vista machine.  Didn't try the other two again

• Problem with Windows 7 acknowledging my printer (Canon i900D) after upgrade from XP

  My printer did not get recognized since I moved my files using Windows Easy Transfer.  I tried to update the drivers but unable to get anything to print.

  http://Canon.driversdown.com/search.asp
  It appears as if there is no drivers for this printer for Vista or Windows 7.

  If you can not make it work, you may need to buy a new printer.

  TaurArian [MVP] 2005-2010 - Update Services