PhotoSmart e-all-in-one B210a: Incorrect Date for the installation of ink

Similar Questions

• Photosmart e-all-in-one C310a: download page for the driver for Photosmart C310A for Windows XP does not have drivers to download.

  Download page for drivers and software for the Photosmart C310a never makes drivers.  He said that it could take up to 3 minutes, but I allow the page to run all night, and she was always in the morning.  Tried to load the page on Chrome and IE.  Windows operating system.  I need to download and install the drivers and the HP support center.

  The HP support site is back running for driver downloads.  Please report back if you have any additional questions.

• HP Photosmart C6280 all-in-One: I can't cancel an installation HP

  My all-in-one software has already been installed successfully years ago. My husband did not know that he had to go through the "devices and printers" in the "Start" menu to access the analysis feature, so he assumed that scanning capabilities were not working. He tried to install the software from the internet, and it gave an error. Now, I can not completely cancel the installation process. I get pop HP ups "of Installer HP request your permission...". "If I let the permission, he brings me through the whole process again just to give me the same error. If I cancel the authorization, he just keeps popping up. How completely cancel the installation attempt?

  It seems that the installation is trying to update the old version to the new version but is a failure.  I suggest that you restart the computer, then uninstall the driver, old and new.

  Of course by then, you can reinstall the printer as you did before, or by getting the software from our site directly:

  http://support.HP.com/us-en/product/HP-Photosmart-C6200-all-in-one-printer-series/3194493/model/3194497/drivers

  Let me know if unistalling corrects or does not solve the underlying problem and we can look further.

• Photosmart C7250 all-in-one: compatibility Windows 10 for HP Photosmart C7250 all-in-one

  Hello.  I have a HP Photosmart C7250 all-in-one, which I am currently using with Windows 8.1

  I think upgrade to Windows 10.  This printer is not compatible with Windows 10?

  If so, do we need to download a new driver?  Which one?

  Thanks for your help

  Hi Emory06, this printer is certainly compatible with Windows 10. You can find the drivers for this OS here: LINK

  Please let me know if it helps.

• HP Photosmart 3110 all-in-One Printer Scanner and install the HP for Windows 7 Solution Center

  Hello

  I have a printer HP Photosmart 3110 All in one with Windows XP. I bought a new computer with Windows 7. I plugged my printer HP to Win7 and now scan does not work. I need your help to install the HP Solution Center and make it work under Win7.

  There is not a download for Windows 7 on this printer. It is the only way for you to scan through paint. You will also be able to get the center of solutions is due to any software.

  THX

• PhotoSmart e-all-in-one B210a: I choose the HP ePrint (tray) paper source?

  I want to find a way to print photos on my iPhone using HP ePrint mobile app. The all-in - one HP B210 - has a dedicated photo tray, but when I send a print job, the printer uses the default main tray and plain paper.

  Is it possible to tell the printer to print PHOTOS (and only) from the photo tray: 4 X 6 photo paper. Or should I first replace the default values for the printer to a laptop or desktop before I try to print?

  Hello

  The default settings on the devices apple AirPrint is printing photos from the photo tray. Hp Eprint app offeres a lot more in terms of print optins and will you choose the dimensions of the various media and allow you to specify a particular bin also.

• HP Photosmart 2575 all-in-one will not recognize that the book is in the status bar

  What can I do to fix this? When I try to print, I get an error message saying paper not in the status bar, but the paper tray.

  Hi vlayerout450

   

  1. What is the exact error message you get?
  2. during how long have you had this problem?
  3. did you of recent changes on the computer or the printer?

  
  I suggest to refer to the link below and check if you have all the latest updates installed for the printer. You can also use the print diagnostic utility and check if it lists any problems-

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=&sw_lang=&product=441240#N270

  
  You can also check if the reinstall the drivers help you. If the problem persists I suggest you to contact HP support for help and check.

   

  I hope this helps.

• HP Deskjet 3520 e-all-in-one: SCAN not SCAN SINCE the INSTALLATION of WINDOWS 10

  My printer will not scann after installing windows 10. I can print and copy. I tried print and scan the doctor. But I stop serching after a few seconds and goes no further after waiting in several ouhers.

  Afternoon @Gittelone,.

  The information I've found can help you with scanning on Windows 10.

  First, you must consider the information contained in these resources.

  • Guide to upgrade Windows 10 for HP printers
  • Compatible printers Windows 10

  If you printer software was installed before your upgrade, I try to uninstall the software completely and then reinstall it by using the most recent driver available on the HP Web site. Here's how to clean all the drivers of your computer.

  I recommend referencing the steps described in this document to make sure that you haven't missed anything whatsoever; Uninstalling the printer software - use as a rough guide, but the steps for Windows 8 should be pretty close to Windows 10.

  You can also delete files using disk cleanup - take care to put check marks in selection boxes when it is available. (Once again Windows 8)

  Software drivers can hide other places would be in your device manager.

  To open Device Manager:
  1) enter the Device Manager in the search field.
  2) click on Device Manager.
  (3) you can click on View, in the upper part of the windows, click Show hidden devices.
  (4) to develop the types of devices and check for any pilot associated with your printer.
  (5) to remove a device from Device Manager, click on the name of the device in the list and then click Uninstall.

  For more information, see for Windows Device Manager information 8/10.

  Download the newest software package here; HP Deskjet full feature software and drivers

  Or download from this link.

  Then look for the updates of Windows; Drivers and software with Windows Update (Windows Update 10, 8)  

  If the problem persists, you can also try to use the HP Scan and capture App instead if necessary. 

  Please let me know if any of these steps has resolved your problem, or if there is anything else I can do to help.

  I look forward to hear from you!

  Thank you

• HP Photosmart 7520E-all-in-one: black prints fine for text but the black areas in photos come out green

  Black ink works very well for text and text with little color, but when you print photos (on HP Advanced paper which is recommended), printed black areas aqua green, or deep.  Other colors are fine.  How can I fix it?

  The probable cause is a cartrdige Photo print does not correctly.  In the paper here troubleshooting steps can help solve black photo print does not correctly on your printer Photosmart 7520.  The Photo cartridge is on the far left of the printer.

• My HP Photosmart C8180 All-in-One Printer does not scan the black and white film strips or slides.

  This problem occurred recently. Previously, the scanner accepted slides and strips of black and white film and scanned them without any problem. Since I've updated the OS on my iMac (I am currently using OS X 10.6.8), I contacted Applecare because I thought that it was possible that my current operating system might have some incompatibilities with the C8180. 'Expert' AppleCare then accompanied me by a uninstall/reinstall, but it has not solved the problem. AppleCare said then that the problem is no doubt HP hardware failure. I find it quite peculiar since the scanner otherwise Applecare analysis works and there is no problem with respect it print or copy.

  Hi, JAOC,.

  Your C8180 can scan slides or films fixed on the memory card.  This will allow you to test the scanning equipment.

• HP Photosmart B110a all-in-one: unable to connect to the home network wireless HP B110

  Hello

  I haven't used my printer for a while, so put in a new cartridge and tries to connect to my wireless network - domestic (the printer is next to the Belkins router). I've also upgraded to Windows 10 recently (also have a laptop with W7).

  The printer detects the SSID for wifi and after you type the router password wireless (WPA - PSK), it is NOT authenticated.

  The password IS CORRECT (100%) but it fails on the section of SECURITY depending on the display and the summary diagnosis. The message of the report is:

  Your route wireless requires a password WPA securitg. The password configured on your HP printer does not exactly. Run the network setup wireless for re0enter your network wireless WPA security passphrase.

  I need this because the only way I print is wireless email / I send it to the email address designated and it prints - it is not physically connected to any laptop / pc.

  I tried several times, including inputtingthe SSID manually, swtiching OFF etc.

  Please help - thank you in advance.

  Best regards

  Disable and remove temporarily the password on your routers SSID. Now try to connect to your SSID unsecured. Are you successful? If Yes, go back and add WPA2-AES with a password and try again.

• Photosmart 3210 all-in-one: cannot install file for HP Photosmart 3210

  I have a file to install my HP 3210 printer. but when the file is unzipped on my PC, I have only the option 'leave', there used to be an option for the installation and uninstallation.
  Why is it not more this installation?
  I can't find the phone number for the Danish HP support, what a pity!

  This file: AIO_CDB_NET_FULL_WIN_130_141

  It should work well, even if HP provides no support for this printer more.
  I don't have a installation CD more.

  Hello

  Currently, you try using an installer of Windows 7, it is not intended for Windows 8.1

  Download and install the following drivers, these supports your printer and Windows 8.1-compatible:

  http://ftp.HP.com/pub/softlib/software13/COL30951/MP-110165-3/AIO_CDB_Net_Full_Win_WW_140_408-5.exe

  Kind regards

  Shlomi

• Photosmart 2610: Photosmart 2610 All In One

  I recently had to reinstall my HP Photosmart 2610 all-in-one.

  I have the software comes from www.hp.com.au and installed it.   At the end of installation, I've set up and the printer print a sample page.

  When I went into settings it has shown that a Photosmart 2610 printer has been connected to the PC >

  However, when I try to print anything I get redirected to the "Send Fax" page, and the document will not display.

  Help!   hehehe

  Phil

  Try to reinstall the software, use thislink to dnload the driver full features and software.

• HP Photosmart C6380 all-in-one intermittently print job does not print

  My HP Photosmart C6380 all-in-One has a problem with the print jobs that fail intermittently to print the first time that I send it to the printer.  I can see the print job listed in the queue, but it fails to print.  I might have to send the job once again, twice or 3 times before it will finally print.

  Try to stop and start the print spooler. I will include the instructions below.

  1. click on the start menu.
  2. in the search box, type services.msc and press enter on the keyboard.
  3 scroll to find print spooler.
  4. Select the print spooler in the list.
  5. on the left side of the window, you should see the words stop and restart in blue letters. Click on stop.
  6. now it say start. Click Start.
  7. close the window.

  If this does not work, try to bypass the print spooler. I will include the instructions below.

  1. click on the start menu.
  2 click devices and printers.
  3. right click on your printer.
  4. Select printer properties.
  5. click on the Advanced tab.
  6. make sure that "Print directly to the printer" is checked.
  7. click on apply to save the changes.
  8. click OK to close the window.

  If it still does not work, go back and set the printer to use the spooler again. After that, try to assign the printer to use a different driver. The link below will take you to these instructions. Let me know what happens.

  http://goo.GL/zCk2r

• Photosmart c6250 all-in-one: frustration driver location

  New hard drive replace crapped-out of road.  Try to find and download the printer driver [Photosmart c6250 all-in-one] successfully to zero on the HP support site... remarkable circular effort: point to drivers, identify the printer, poster printer photo on the screen does not work... Thank you very much!  This should not be comparable to eye surgery.  I started by trying to stay away from sites not HP, but it isn't work.

  Hello:

  Here is the link to the page support and driver for your printer.

  http://support.HP.com/us-en/product/HP-Photosmart-C6200-all-in-one-printer-series/3194493/model/3308552/drivers

  I can access the selection of the pilot very well.

  I discovered by another forum member who:

  1. for pages works properly, you must use Internet Explorer 10 or 11.

  It is a problem for some of us who climb to IE9 such as those who have Vista or a new install of W7.

  The workaround to get IE8 or IE9 to access the page of the pilot is to:

  1. activate the command bar at the top of the browser (click just to the right and check the option of command bar).

  2. then click on the small arrow to the right of the Tools menu.

  3. click on compatibility view settings

  4 uncheck use Microsoft compatibility lists.

  5. close and refresh the page.

  You will probably then a message you must run IE10 or IE11, but you can close this and get to drivers.