Photosmart Essential 2.5 startup

Similar Questions

• HP PhotoSmart Essential error at startup

  Hello

  Until the other day I had any problems when I start my computer.  A few days when I started the computer I got a pop up titled 'HPPhotosmartEssential' box and it said "Please wait while Windows configures essential HPPhotosmart" and a few seconds later another popup box titled "HPPhotosmartEssential" the following information - "there is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your personlel provider or support package ".

  I have more the OfficeJet J4680 printer installation CD but I don't have the software to download so I opened it upwards and it was installed in the temp folder.  of which I went to start and typed folder and opens this file and follow these steps...

  Open the file "Setup."

  Open the folder "Scan". Right click on the "scan" (windows installation package) file and click 'fix '. If no error message appears, once again, right-click on the file and select "install".

  Return to the folder and open "bpd_scan" installation folder. Right click on the file 'bpd_scan' (windows installation package) and click 'fix '. If no error message appears, once again, right-click on the file and select "install".

  When I clicked on repair I received a new window bpd_scan error message that says: Module C:\Program HP Imaging\bin\hpqebpd2.dll failed to register. HRESULT-2147220473. Please contact support staff. I clicked on OK & following the next step

  Return to the folder and open "destinations" installation folder. Repeat the process above and that the repairs happened well.

  I restarted the pc but the problem persists.  (I deleted the shortcut of this file that was located in start > programs > startup - I deleted the shortcut of this file (called HP Digital Imaging Monitor).)

  I also opened a command prompt (run as administrator) and type in regsvr32 hpqebpd2.dll and who stated DLLRegister Server in hpqebpd2dll.

  I restarted the pc, but when I click on the file to open it (even if I do a right click and run as administrator) I still get 2 contextual window boxes.  And when I click OK or cancel the boxes still jump upwards of 3 or 4 times until it stops.

  I noticed that when I clicked to run / open this file it will appear in the lower right but I always get these boxes popup several times.

  Nothing had changed from one day to the next on the pc so I don't know why the problem occurred suddenly.  I ran several scans online for viruses and malware, as well as a boot scan, but nothing was found.   I have run ccleaner and noticed that he has found a missing DLL to C:\PROGRAM HP IMAGING\bin\HpqSRmon.exe

  I am running Windows Vista Home Premium with all current updates and is an officejet j4680 printer all-in-one.

  Others want a complete uninstall of the software to uninstall Panel or revo control printer and then reinstall the software I don't know what I can do to possibly solve the problem.   The printer software is version 14.

  Other possible suggestions or solutions would be very appreciated.

  TIA

  I'm glad you responded! I wanted to share with you all what I have solved my problem last night after having carefully followed the steps that I mentioned above. This way I can now explain the steps in a little easier way. When I started to experience this error on startup, I thought it was related to my network because it happened also when I turned the printer on and outside. I have to press OK, Cancel, etc. what felt like 50 times before my error message disappeared. I know it's a different file, but the symptoms are exactly the same, since an uninstall did not resolve the question or fixing things in Device Manager. It seems that the link you have provided very simple steps to a L3 uninstall. The great binding, but I found a simple way for the common user. Here are the steps that I took last night and my computer worked never better:

  1. I did a normal uninstall first. Don't forget if you have a USB cable, wait that uninstalling invite you to remove the cord but also before Setup tell you plug it back in. The complete uninstall took almost 25 minutes.

  At the end of the uninstall, you will get a prompt to click 'Finish', however I didn't click it. I've been waiting to restart my computer after I ran the disk cleanup utility in all programs > Accessories > system tools > disk cleanup.  This process took almost an hour.

  2 after disk cleanup was complete, I restarted the computer by clicking on the button 'Finish' the HP software that was always on my desk.

  3. after the restart, I followed the link to CCleaner and would like to mention to people not too savvy to be careful by pressing the green button 'Download now' more than once computer. It seems that there are a handful of commercial products that look like they tried to trick you into downloading the software.

  4. once the download is complete, CCleaner has opened and seemed much easier to use than I thought. I chose the tab register on the left, "scanned for any question," then selected difficulty scan after you have backed up files to remove (the software asked me if I wanted to save that I did). Sometimes you can scan up to three times until all problems have been corrected. As easy as it sounds, I still highly recommend reading so much about this product before installing it (see previous posts). This process was done very quickly, so I decided to use the file cleaner as well. Who did take a long time - about 30 minutes.

  5. this time, I rebooted by computer by stopping completely and then back on with the power button. I always liked this method instead of select "restart" your computer.

  6. I have confirmed my operating system on my computer will start and by doing a right click on 'My Computer' and selecting Properties at the bottom of the box grey just to make sure that I do not install the HP bad software. Then everything just re-installed the software at www.hp.com/support by typing the name of my printer tab support and drivers. The whole installation process took 20 minutes and even got an error at the beginning of my extraction process which stated "the Extraction failed. File is corrupted. "My heart is Serra for a bit, but after having clicked on the button"Download"once again, I have had absolutely no problems my network printer installation.

  7. I would like to add, during the installation process, you will see a screen that says 'Click here to customize' and I deselected product Participation, HP Update and some other useless tools, but I kept the driver, the solution, HP Imaging Device Center (which is what was causing my problem) and HP Photosmart Essentials since this is what was causing the problem. I had no problem after that.

  8. Finally, I did a reboot to ensure that all boot errors went away and the computer booted faster than ever with no error. Final test of all the features worked great. I was excited to try these steps on my own last night so that I could provide a way to rephrase things for all those too afraid of getting deep into their computer files. I hope as the method to keep it simple you will also feel because that please don't forget, using third-party software comes with its own risks. Let me know if this does not work, and then we can speak of an uninstall of L3/L4.

• Software of HP Photosmart Essential

  Anyone know if the HP Photosmart Essential software for Photo editing, print and share allows me to print a Bordless printing the pictures on my HP Photosmart P1000 printer?  I noticed that this software is available for free download on the HP website.  I'm looking for a possibility to print that will allow me to print a Bordless (edge to edge) when I'm printing photos.  When I select print on my HP Photosmart P1000 printer, on the tab layout, there is no Bordless no print option.  This option is available on the HP Photosmart 7550 printer but not on the P1000 printer.  Can someone help me please?

  Sorry, P1000 is simply not able to print without margins, paper management is not designed for the printing of bprderless.

  Kind regards
  Bob Headrick, Microsoft MVP printing and imaging

• HP Photosmart Essential

  On my HP Pavilion a1310n pc, I have two Photosmart Essential and Essential 3.0.  Should I remove the first?

  Dgilchri, welcome to the forum.

  It is strictly a personal preference.  If you don't need all the two would be nice to delete one of them.  However, having both on your computer will not be a problem.

  If your problem is solved, please click "accept as a Solution.

• PHOTOSMART ESSENTIAL 3.5

  Photosmart Essential 3.5, I installed and it worked fine for a day or so, until I connected to my account. Since then, when I run the program it stops at the point where the 'Things to do' window is displayed. The program does not open any other and just stay there running. The Task Manager does not show it as a program non-comportement of the answer, but I have to use to exit the program. I tried to uninstall the program several times, but it always comes back to the same place to stall. I have tried Photosmart Essential 1.2 and it seemed to work fine.

  Does anyone have suggestions as to how I can solve this problem or that the files and folders that I should remove to a clean install?

  Dell dimension 8300

  Windows XP Sp3

  Processor 3 Ghz.

  4 GB of Ram

  640 GB HD

  Thank you.

  You have lots of photos on the disk? I guess it might take time for indexing of your photos? What happens if you leave for awhile?

• Unable to photos with HP Photosmart Essential 3.5 online order No. Internet Connection error

  Original title: network network adapter Ethernet NIC wireless networking device

  I want pictures of ordering online with HP Photosmart Essential 3.5, but when I try to send my order he says no Internet connection.

  Why my icons are connected to the internet?

  Hello Gloria,.

  1. What is the operating system installed on your computer?

  2 are you able to browse any other website normally?

  3. which web browser you are using?

  4 have had any changes made to the computer before the show?

  Please uninstall HP Photosmart Essential 3.5 and install the HP Photo Creations software and check if it works very well.

  HP Photo Creations software replaces the HP Photosmart Essential, area of the Image and Image Zone Express software.

  Links:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-in/Windows7/uninstall-or-change-a-program

  http://www.HP.com/global/us/en/consumer/digital_photography/free/software/photo-creations.html

  I suggest also, please contact HP support for assistance. They should be able to help you.

  http://h30434.www3.HP.com/T5/welcome-to-the-Forum/CT-p/about

  For all windows questions do not hesitate to contact us and we will be happy to help you

• Photosmart Essential 3.5 - cannot get all the photos in the library

  I'm trying to create a CD label to print on a CD on my HP C5580 with an image from my library.  But when I go into my library, are there pictures that until 2013, and not all those who are there.  I tried to add/update the records from my pictures file on my computer, but cannot me, either because the folder is grayed or there is no pictures inside.  When I select the 'File' option in the library, recent files appear with the number of images () after it, but still, I can't select the folder.  I tried to import an image of a disc and the watch file, but with no picture.  Is there a way to get these missing images in my library?  And if not, is there any other software from HP that I can create a CD label to print on a CD on my HP C5580 printer.

  I uninstalled and reinstalled Photosmart essential 3.5 which did not help.

  Thanks for any help.

  I have read several other articles, and it seems that this problem is ongoing for several years and HP is not a solution.  A lot on blogs suggested trying Sure Thing Labeler disc.  So I went to their website and downloaded the 15 days trial version and it worked like a charm.  I used one of their models for the design of my CD.  I was able to use a photo of my photos file and used.  When it came time to print, I had to select Manual to put in some of the parameters for the C5580, but it perfectly printed on the disc.

  I intend to purchase the Sure Thing Labeler $6 29.95 disc, so that I can fully use my HP C5580.  Before get rid you of your HP C5580, try Sure Thing Labeler disc.

• Photosmart C4280: Photosmart Essential 3.5 will not work after the Win 10 update

  The Photosmart Essential suite, which includes the scanning software will not work after the upgrade to Windows 10.   There is no message error that pop up or are listed in the event log.  Printing continues to function properly.    If the s/w is not compatible with Win 10 there the other scanning software free that I can use?

  Hello

  Thank you for using the forum.  Think that you are facing the same problems as others with Win 10 updates.

  Try this solution:

  http://h30434.www3.HP.com/T5/inkjet-printing/HP-Solution-Center-fails-to-launch-cannot-open-solution-here/m-p/5424438/highlight/true#M515792

   

  Hope that helps.

  Please click on "Bravo Thumbs up" as an encouragement and "Accept as solution" if it helped to solve your problem.

• Download hp photosmart essential. Where to find a safe downloadsite for a Swedish version

  My Hp Photosmart Essential suddenly abandoned - the computer has tried to find a solution, but diddnt.

  I found a site for a Swedish version. But how do I now that it is safe. HP have such a site? My needs are simple.

  Hi @EMCO ,

  I understand that your Photosmart Essential software has stopped working.  You tried to have the research of the computer for a solution without success.

  The Photosmart Essential software usually comes with the installation of the printer.  If you have your installation disc, try reinstalling from there.

  Here is a link to the HP Photosmart Essential software.  You will need to enter your model number and follow the instructions on the screen.

  If it worked before and you have not uninstalled the program, you could do a restore to where he worked.

  I hope this helps.

• HP PHOTOSMART M425-PHOTOSMART ESSENTIAL-WINDOWS 8.1

  I have a HP Photosmart M425 camera.
  When I had Windows XP, I used the PHOTOSMART ESSENTIAL software and I was able to download the audio recorded in photographs.
  Now, with Windows 8.1, I can no longer use PHOTOSMART ESSENTIAL.
  How can I do?
  Thank you.

  Okay, I have a M425 so I'm not aware that he can attach a separate audio clip to an image. Very interesting however and useful for creating slide shows and videos.

  HP Photo Creations is printable projects only. It has no audio capabilities.

  You will need to use another program to use audio clips.

  IF you have a Photo Essentials installation disc, you can run in compatibility mode. That's according to HP in this video.

  I think that HP took down the link to download Essentials like only creations now rises. You will need to go to a third party site to catch him. But using this kind of thing at your own risk.

  Hope that helps.

• Impossible to uninstall hp photosmart essential 3.5

  Original title: hp photosmart essential 3.5

  HP dumped all my photos and now I'm trying to remove my computer from HP photosmart essential 3.5 because it is causing me problems.  I can't get rid of it.

  I ran malwarebytes and virus scan, OK

  When HP Photo essentials crashed I uninstalled and tried to re - install and this is where the problem started.

  I left since Mr Microsoft Fixit find a faulty uninstall patch which he repaired.  I then uninstalled and reinstalled again and that fixes the problem.

  Thanks again.

• where can I go for hp photosmart essential 3.5 help & support?

  Since hp cancelled hp photosmart essential 3.5 & all home creations, Miss me a lot of pictures. need help to find

  rockydoo,

  What you need to do is click on the MS ball and type in the word from the image file extension search engine.

  Common extensions are 1) jpeg and jpg) 2.

• How can I print wallet size of the same image on Photosmart Essential 3.5

  How to repeat the same image in paperback on Photosmart Essential 3.5

  Hello

  Don't know if its possible Essentials 3.5 but it is very easy in windows itself. Access the photo in windows explorer, right-click and select print. Selecht the size of paper you use, and then select Pocket on the right. See my photo of example for more details.

  

• Photosmart Essential 3.5... No Internet connection

  After a successful year of 3.5 must use to publish albums and order prints via Snapfish, I now have No Internet Connection message. I have uninstalled and reinstalled several times 3.5. I was online chat with HP and still have the same msg.  HP was not able to solve the problem. I chatted online with Snapfish and the end result of this cat, Snapfish was told to download it from their site vs. 3.5.  FYI... When I click on the album to publish in 3.5 button, I get the msg publish on Snapfish, etc., however, the Internet of No connection appears shortly after.  Does anyone have any suggestions as to why I got the msg or how I can fix it?

  Since my original post of the 'no Internet connection using the Photosmart Essential 3.4"I can say that I have more the problem because (like another before me posted) I bought the Canon SX120IS and life is good. The problem never solved and after spending too much time trying to find a solution, I decided to... And it is indeed a great shot!

• Photosmart Essential 3.5 gel

  I signed Photosmart Essential 3.5 the frozen screen and the mouse pointer became a spinning disc.

  The only issue was Ctrl + Alt + Delete.It was advised by HP to uninstall - reinstall, but this does not

  difference after three attempts. It seems that other users have the same problem then come help HP.

  MINDER

  Finally a solution to all the problems, I had with Photosmart Essential 3.5.

  I installed the program once more then Cat of Cheshire solution and this

  time all works well. Thanks a lot a lot Cheshire Cat for your advice.

  Cordially Minder.