Photosmart HP 5510 printer

I replaced the low ink cartridges using HP products, but the printer is still saying ink is low and will not print... any ideas anyone please? Irritating v.

Thank you

Katie

Please try these steps and no problem.

I recommend you contact HP technical support for further assistance. Click here to read: worldwide Contact HP.

Tags: HP Printers

Similar Questions

  • Need to download a driver for Photosmart HP 5510 printer.

    I BOUGHTAN PHOTOSMART HP 5510 PRINTER BUT NOT THE INSTALLATION OF A CD BECAUSE MY NETBOOK HAS NO OPTICAL DRIVE. WHAT I NEED IS A GOOD LINK TO DOWNLOAD THE DRIVER, PLEASE HELP. I HAVE TRIED SEVERAL SITES WITHOUT SUCCESS.

    Hello

    Start here http://www8.hp.com/us/en/support-drivers.html

    Don

  • Photosmart HP 5510: printer not connected to the network, although it

    Hi people,

    I am at my wits end with this and you are my only hope (what Star Wars quote).

    I have a HP Photosmart 5510, I've had around 2011.  I've always used it in the company of my iMac (OS X now on El Capitan). Over the last year or two, there was the strange number to which case when I open the HP utility on my iMac it says it is not able to connect to the printer and I should check that it is switched on (this is before you ask). This question seemed to resolve itself after a short while and there was no problem.

    However, I came to analyze some elements of the other day, and this same old issue again raised his head. I put my paper on the scanner and press the option scan only for the printer to tell me that there is no connected computer. Weird, I thought I had printed only some points the day before. I went to my iMac and open the HP utility to see my former favorite message that the printer was not plugged in blah blah.

    I went on HP website to see if there were new pilots required, which it was not (the last was for OSX Yosemitie!).

    I decided to try and start fees and remove the printer and re - add new. I deleted the printer, downloaded the latest HP deriver (just in case) and that's where everything went wrong.

    Software downloads, all right, it starts going through the installation process, end, then he gets to the selection of the device, issue. It evokes three devices that are my one and only printer (Strange I thought). Two with the "connection type" listed as Hello and the other with the connection type is listed as IP. I tried selecting each of these only for each of them to come back with the following error message:

    "YEAR error occurred while the communications device." Please make sure that the device is ready and try again." Well, if they hear by loan, circuit implementation, its connected to my network then YES ITS BLOODY LOAN! So I get no more on the process by the printer and HP Utility installation is nothing else than a large black plastic paper weight. I tried to reconnect my printer to my network wifi several times and everything is fine, its connected and there is no problems according to the page of "wireless network test results" print.

    What the hell is happening? Any ideas? Please save me before I throw this thing by the highest window that I can find.

    I'm not a computer expert and I'm certainly not a network specialist. All the advice is appreciated greatly and fortunately.

    Hey @Mvdarbs,

    Welcome to the Forum from HP Support. We're here for another help to get the most out of our products.

    Thank you for your message. I see that you experience the Mac-to-printer communication problems when you use the HP Photosmart e-All-in-one 5510 printer. All this happens despite your apparent WiFi connection. While it is no doubt frustrating to live when all you want to do is print, there are solutions that you can try and I hope that they will restore the regular feature.

    I recommend you try the following steps:

    (1) we will start over with the installation of your network printer. From the control panel press the wireless icon, and then select "Restore network Defaults."

    2) façade, run the "Wireless Setup Assistant." Reconnect to your home network and then make a note of the IP address.

    3) visit the printer embedded web server (EWS): this is done by entering the IP address of the printer in the address bar of the web browser and navigating to this address. If you have a security alert (as this page is not encrypted), click on to "Go forward anyway." If the page loads correctly, we can be certain that the network connection is real. While you're there, make a note of any error messages or status alerts (if you see it, it's all good) and don't forget to advise me on what you see.

    4) remove the printer from your Mac. If you are not sure how, refer to the

    guide for advice.

    one) (optional)-set a static IP address for your printer. Refer to this thread of @PrintDoc here: http://h30434.www3.hp.com/t5/Printers-Archive-Read-Only/changing-IP-address-for-wireless-printer/td-p/445087 for instructions on how to do it.

    5) reinstall your printer: click here and install the driver that you are prompted.

    Please let me know the result of your troubleshooting by responding to this post. Don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

    See you soon,.

  • 5510 Series Photosmart B: Photosmart HP 5510 printer

    A few years ago I bought a HP 5510 Photosmart B series printer and everything seemed to go well until last year.

    I had to replace a black cartridge, so we bought a set of cartridges HP, and I adapted the black one as requested.

    The machine then told me that another color necessary evolution, so I did, and ended up changing all the colors that seemed strange.

    I then had a series of flaws, saying that the cartridges were defective, or they were empty. However after have released them several times and replacing the fault corrected its self.

    This then breed arpound 6 months later, but it corrects itsself finally.

    Today, I bought a new set of cartridges, as the printer says that I needed Blak again. I had exactly the same faults, and no matter what I faults will not disappear.

    Its saying that one or more of the cartridges appear to be missing or damaged. Install or replace the affected cartridges.

    Whenever I refill the cartridges, its indicators until a different color that needs to be replaced

    I admit it's now me depressed, and these cartridges are not exactly cheap to replace

    Anyonme can you please help

    Ken

    Dear kenc1,

    Please follow the steps in this document:

    http://support.HP.com/us-en/product/HP-Photosmart-5510-e-all-in-one-printer-series---B1/5053904/model/5053905/document/c02924284/

    I hope you find it useful.

    Greetings.

    * I am not an employee of HP, my work is voluntary.

    If this answer was helpful and clarify or solve your problem, please mark the topic as resolved and click on my next star to indicate a kudo, thank you.

  • 0x6100000bhaving a problem with my photosmart hp 5510 printer... Help

    problem with my photosmart hp 5510 0x6100000b please help the ink tray won't

    Hi, I know that this post has been done for a long time, but I just wanted to check if it is resolved? Do you have a warranty replacement printer?

    Thank you

    Ciara

  • Wireless Photosmart HP 5510 printer

    I have a laptop Toshiba Satellite with Windows 7 and a wireless HP Photosmart 5510 printer.  It has everything set up in the store where I bought it, but I can't get a document to print from the laptop.  I did a diagnostic check, but she returns as all connected, but I still can't print.  I think I'm something wrong or missing something.  Any ideas, anyone please?

    Contact HP.

  • Photosmart HP 5510: print/label with a hp Photosmart 5510 all-in-one

    I would like to label printing on dvd blank that I recorded, my question is: can I print on DVDs with this printer model?

    Hello

    Unfortunately not, this printer does not support printing directly printable CD / DVD.

    Kind regards.

  • Photosmart HP 5510: Printer offline

    Mac using xfinitywifi of a hot spot of Comcast and the listed HP wifi printer. The Indiactes printer is connected and ready, but the computer says "printer offline". Need advice on how to get the computer/printer to find and allow the printer to work.

    Hi @Gravelkicker

    HP supports WiFi, no hot spots or MiFi. I can suggest a document that could help, but this type of connection is not guaranteed to work, because it is not supported. "Printer is off-line" Message appears on the computer and the printer does not print: Mac OS X.

    I hope this helps.

  • How can I remove the cover of my Photosmart HP 5510 printer

    I am told that the printer cover comes off.  I tried everything, except her tearing.  Can you explain it to me.

    Hi DickTurner,

    Sorry to hear the call of support did not help to resolve this problem. The lid should break pretty easily. Please refer to the screenshot below. I hope this helps you remove the scanner cover.

  • I use Windows 7 and my pc does not recognize my wireless Photosmart HP 5510 printer

    It will print but after not using it for awhile, when I try to print, I get the message that my computer can not find printed

    First thing I would try is restart your wireless router and if this does not work, it give a try.

    HP Print doctor for help with many printing problems

    http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&docName=c02073861&JumpID=ex_r4155/HHO/IPG/ccdoc/trailhead_doc&lang=en

    I hope this helps.

  • photosmart HP 5510 vote B11a: noise and Auful printing problem

    Hello world

    I'm new here.

    I have a problem with my photosmart HP 5510 printer, when I try to print it makes a terrible noise and it does not print.

    I try update firmware, reset the printer, change the cartridge, remove all the piece of paper, but nothing.

    Could you help me please?

    Thank you

    Alessandro

    Hi @alessandro96

    I'd love to help you with the sound that you hear from the printer. I understand that you have already begun to solve the problem, but the noise remains. Please post back with the answers to the following questions;

    1. Is the printer on a flat surface?
    2. How long has noisy for the printer?
    3. Didn't help then the noise started? (ie. the paper, printer error message jam was fallen/hit, surge)
    4. There are flashing lights, or the error messages on the printer?
    5. When was the last time that the cartridges have been changed?
    6. If you are a Virgin copy, when you hear the noise?
    7. If you open the printer do you see broken parts?
    8. When opening upward where the cartridges go, they move freely?
    9. The cartridges are installed correctly? (ie. the cartridges are level and does not appear).
    10. Perform a hard reset. With the power on remove power cord from the back of the device, then from the wall outlet. Press and hold the power button for 30 seconds (drains the excess power of the printer). Plug the power supply into the wall outlet, then the printer.
    11. You still get the noise after that?

    I look forward to hear from you.

  • How can I install my HP Photosmart 5510 printer on my computer Windows 8?

    I just bought a Toshiba laptop with 8 of the window.  In recent months, I bought a Photosmart HP 5510 printer.  The installation disk will go up only to Winows 7.  How can I install the printer on my new computer?

    I included a link to the drivers for your printer. Click here for the drivers.

    Let me know if it helps.

  • Photosmart HP 5510 will not print in black

    I replaced the cartridge, made sure that the cartridge was evacuated, but could not find the control panel how to clean the print head. I followed the instructions carefully, but my computer laptop gateway has not called to configuration tools.

    Hello patl46616,

    Welcome to the HP Forums!

    I understand that your Photosmart 5510 print no black ink. I will do my best to help you! You can "Clean printhead" on the control panel of your printer:

    1. Make sure that this ordinary letter of white American or A4-size paper is loaded in the tray.
    2. From the Control Panel Home screen, press the right arrow key ( ), then tap the Setup icon ( ).
    3. Tap Tools , and then tap print head cleaning . The printer cleans the print head and then prints a test page.

    Also, follow this HP document on fixing of the streaks of ink faded prints and other common Print quality problems Please post your results, I will be looking forward to hear from your part have a good night!

  • Upgrading to windows 7 - does not recognize my printer Photosmart HP 5510

    my upgrade to windows 7, microsoft does not recognize my printer Photosmart HP 5510? I've tried everything

    Try to download the latest drivers from the HP website:

    http://www.support.HP.com/us-en/product/HP-Photosmart-5510-e-all-in-one-printer-series---B1/5053904/model/5053905/drivers

    I suggest you to uninstall and reinstall the latest compatible drivers for Windows 7.

    You can also run the troubleshooting of the printer.

    Open the printer Troubleshooter

    Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.

    For more information, visit the below mentioned link:

    http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

    Printer problems: http://blogs.technet.com/b/markrussinovich/archive/2010/04/12/3324570.aspx

    Run the printer problems to: http://support.microsoft.com/gp/printing_problems?entrypoint=WHHT

    You can see the below mentioned links.

    http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

    http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

    http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

    http://Windows.Microsoft.com/en-us/Windows7/printing-to-the-correct-printer

  • Photosmart 5510: No color on Photosmart 5510 printer printing.

    I've purcheased new cartitgages. I shook the cartiratages. I tried the cleaning function, realign, even the old hit on the machine of Nintendo days tour! I am completely lost as to what could be the issue. It prints black, but black only. It does not read even the new cartriatages as full. I bought office depo. Please help me!

    Hello

    Welcome to the HP Forums!

    I understand that no color is printing printer Photosmart 5510. I'm happy to discuss this issue for you!

    Please take a look through this guide, the printer prints blank Page not printing black or color ink for the Photosmart HP 5510 e-all-in-One Printer Series.

    If you've been through all of these steps and the issue is not resolved, please call our hotline at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

    I hope this clears things up for you!

Maybe you are looking for

  • Z5200: Q5669-67070 high corner to Z2100? Print quality problems

    Ive got a Z5200 on the bench, and he is smearing ink a litle on the edge of the paper which an effect of bands. The effect comes and goes I came across this Q5669-67070 part and Q5669-67075 It is is a 'wdge extra-high PRS. I find no what he does - bu

  • Satellite A300 - point the mouse jumps around

    Hi guys,. For some reason any my A300 worked just perfect and all the drivers Toshiba disspeared.So I have no more function keys, press the start/stop utility and so on. I managed to install again but synaptic touchpad driver, didn t turn off.I disal

  • 7 HP upgrade to windows 10 stream

    Hi, I downloaded the update to windows 10 today, but when it comes to accepting Microsoft conditions I can't get the Panel "agreed." It is away from the screen and the only decline is visible about. I can't to the 'agreement', but in portrait mode or

  • Findroute (SwitchExecutive 3.00)

    Hello I've updated SwitchExecutive v2.1 v3.00. I use Findroute() to get the path between 2 points of termination. I don't want to use the desktop mode but if the user connects 2 times the same points I don't return an error: Join the 2 Point Point1 C

  • connection with the base switch

    im running windows server 2008 with cisco switches, but when I connect a switch to one of my drops and add more than one computer to the switch, that it is not connect the computer that a network is running the rest does not get why?